Power Strips With Circuit Breaker

Tripp Lite Surge suppressor features 6 ac outlets, 8 foot cord and right angle flat plug. Surge suppressor has built-in power switch and 15 A circuit breaker that offers power control and overload protection over all outlets..Input voltage: 120 VAC, 110 VAC - 125 VAC.Input connection: NEMA 5-15P input plug.8'.Surge energy rating: 990 J.Power h and ling: 1.88 kVA.Frequency: 60 Hz.Receptacles: 6 x NEMA 5-15R.Overload protection: 15 A circuit breaker.Form factor: Wall mountable.Dimensions: 10.8"(H) x 1.9"(W) x 1.2"(D).Protection type: Surge protection, spikes protection, line noise protection.Material: Plastic.Built-in AC surge suppression shields connected equipment from damage and performance problems due to transient surges.Set of RJ11 telephone line suppression jacks protect dialup and DSL modem lines, fax machines, cordless phones and more.Fail-safe thermal fusing protects against fire and other damage in the event of an extreme, extended overvoltage or surge condition.Right angle flat plug.Package contents: Surge suppressor, flat plug, instruction manual.Certifications and standards and : RoHS, UL1363, cUL, UL1449 3rd edition, UL497A,FCC part 68.Weight: 1.12 lbs..Warranty: Lifetime limited.Tripp Lite Surge suppressor is rated at 990 joules to protects equipment from surges and line noise and has diagnostic LED to warn of suppressor damage.

CyberPower CPS1215RMS Rack Mountable 1.8 kVA Power Distribution Unit.Input voltage: 120 - 330 VAC clamping.Output voltage: 120 VAC (60 Hz).Power capacity: 1.8 kVA.Plug/connector type: NEMA 5 15P straight, Receptacles: 12 x NEMA 5 15R.Form factor: 1U 19" rack mountable.Cord length: 15'.LED indicator: Power on (Yellow), ground (Green), surge (Red).Surge energy rating: 1800 J.LED status lights indicate Power On and wiring faults.Provides shielding against electromagnetic interference & radio frequency signals. Most co mmonly, this is used to prevent line noise or hu mming that occurs over telephone lines or stereo electronics.Convenient unit reset in case of an overload.EMI / RFI 150KHz to 150MHz filtering, 15 A circuit breaker, lighted on/off switch.Operating temperature: 32 - 104 deg F, 5 - 149 deg F (Non operating), Operating humidity: 0 - 95% non condensing, 0 - 95% non condensing (Non operating), Altitude: 0 - 10000 ft operating, 0 - 50000 ft non operating.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RMS unit, warranty card/manual.Weight: 5.10 lbs..Warranty: 3 years limited

TRIPP LITE 5-15/20R 12 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital meter. It enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-20P / NEMA L5-20P 15 ft 20 A 100 - 127 V input.120 V 50/60 Hz output.12 NEMA 5-15/20R outlet connector.20 A overload protection.1U horizontal rack mount.Package includes PDUMH20 metered rack mount PDU, L5-20R to 5-20P plug adapter, owner's manual with warranty information.Built-in 2 digit visual meter continuously reports PDU load level in amps.Back panel grounding lug.Rack mount, vertical rack mount, wall mount/under-counter style.Outlets center to center measurement: 30.20 mm.Form factors supported: 1U rack mount, 0U vertical rack mount, wall-mount, and under-counter installation.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Multi-outlet power distribution unit with digital current monitoring is the ideal means of powering multiple loads in 19 inch rack mount, wall-mount, and under-counter applications such as internetworking, PC systems, telecommunicati.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.3.6 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Lifetime limited warranty.TRIPP LITE 5-15/20R 12 Outlet 20 A 100 - 127 V Metered Power Distribution Unit is made of rugged steel casing, and built in circuit breaker to ensure maximum durability.

Schneider® AP8832 APC® Electric Metered rack power distribution unit with 24 outputs offer active metering to allow energy optimization and circuit protection. User-defined alarm reduces the risk with real-time local and remote alerts to warn of potential circuit overloads. Includes ultra low profile circuit breakers, real power monitoring, a temperature/humidity sensor port and locking IEC receptacles. Has a nominal input voltage rating of 100/120 V and frequency rating of 50/60 Hz. Operates at a temperature range of -5 to 45 deg C..Power distribution unit offer active metering to enable energy optimization and circuit protection.Measures 1791 mm x 55 mm x 44 mm.Comes in black color for new look.Features input voltage rating of 100V, 120V and input frequency of 50/60 Hz for reliable operation.Output voltage rating of 100 V, 120 V and 24 x NEMA 5-20R output connections.Local digital display helps installers avoid overloaded circuits.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space.Full-featured network management interfaces that offer standards-based management via Web.Operating environment of -5 - 45 deg C, operating relative humidity of 5 - 95percentage and operating elevation of 0-3000 meters for better performance.Alarm threshold avoids overloaded circuits.LED indicator indicates overload and warning conditions based on the user-defined alarm thresholds.Integrates with StruxureWare data center expert for added flexibility.Easily upgrade firmware via network download for future product enhancements.Contains horizontal, vertical and toolless-mount varieties.Meets cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL certification and standards.Weighs 6.67 kg.Comes with 2 years limited warranty.Schneider® Electric Metered rack power distribution unit offers real-time remote monitoring of connected loads. Has a nominal output voltage rating of 100/120 V.

This 360 Electrical hub features five outlets to power all your tools. Its ultra-rugged hexacore construction stands up to the toughest abuse. The power hub features a circuit breaker that protects against overloads..Five-outlet hub to power all your tools.Comes in yellow and black.Dimensions: 1.68"H x 6.5"W x 5.75"D.Features a circuit breaker that safeguards against circuit overloads that cause damage to the equipment.Voltage rating of 120V, current rating of 15A, and power rating of 1.8kW.Snap-close outlet covers with easy-open grips.120 maximum angle outlet spacing fits large plugs.Extra-wide plug opening fits oversize connectors.Highly visible power-on indicator light.Ultra-rugged hexacore construction stands up to the toughest abuse

Power: 120 VAC output voltage, 50/60 Hz, 1.8kW power handling, 15 A line current, 1340 J surge energy rating, 60000 A max surge, 150 V RMS clamping.Input voltage: 120 VAC (110 - 125 VAC).Input connection: NEMA 5 15P input plug.6' cord.Dimensions: 1 1/2"(H) x 12 1/4"(W) x 2 1/4"(D).Receptacles: 6 x NEMA 5 15R.Power: 120 VAC output voltage, 50/60 Hz, 1.8kW power handling, 15 A line current, 1340 J surge energy rating, 60000 A max surge, 150 V RMS clamping.Form factor: Wall mountable/floor mountable/desktop mountable.Material: Metal.Protection mode: Full normal mode (H N) and co common mode (N G/H G) line surge suppression, overload.Supports 2 large transformers without covering adjacent outlets, built in LEDs confirm suppressor protection present (green) and grounded (red) status, 6 right angle outlets.Up to 20 dB EMI/RFI noise filtering, single row of outlets, rugged metal case provides extra safety and durability.15A resettable combo switch/circuit breaker, combination AC circuit breaker and 2 position on/off power switch, 14 AWG gauge and SJT cord, strip style.Distance between standard outlets 30.40 mm, distance between transformer and standard outlets 45 mm, keyhole slot center to center measurement 225 mm.Application: Ideal for personal computers, TV/VCR/DVD, stereos and lAmps/lighting.Includes: TLM626 surge suppressor, instruction manual with warranty information.Standards and certificates: UL 1449 3rd edition, UL 1363/497A, IEEE 587, RoHS, cUL, green compliant, FCC part 68.Weight: 1.8 lbs..Warranty: Lifetime limited.Tripp Lite Protect It! Six-Outlet Surge Suppressor - Protect Your Electronics from Surges

N/A. This rack-mount PDU features eight C13 outlets and you can install it into 1U of rack space to power your rack-mount equipment. The PDU provides 16 amps of power to be shared across the eight outlets.Sleek, professional installationUnlike some rack power solutions that mount awkwardly, if at all, this rack-mount PDU is EIA-310D compliant, which ensures a secure and tidy installation into any 19" rack with 1U of available space. Mounting screws and cage nuts are also included to ensure you have everything you need, saving you time and hassle.Flexible power solutionFor maximum compatibility with your devices, this PDU features C13 outlets which are ideal for a wide range of globally distributed devices including I.T equipment, office equipment, measuring instruments and medical devices. Plus, with a total of eight C13 outlets, the PDU can distribute power to your entire rack.Protects your equipmentIn the event of random energy surges that can occur during power outages or other anomalies, this PDU prevents costly damages to your equipment with a built-in dual circuit breaker, ensuring your equipment is protected.The housing of this PDU is also constructed of rugged steel to provide maximum durability in any environment.The PDU08C13H is backed by a StarTech.com 2-year warranty and free lifetime technical support..Ensure hassle-free installation with a 1U EIA-310D compliant PDU.Get wide device compatibility with a PDU that features C13 outlets.10 ft. (3 m) C19 to NEMA5-20p power cord included.Protect your equipment with the dual circuit breaker that's built into this PDU.Solid steel chassis for durability.1U rack-mount design

Shield your connected equipment from damaging power surges and spikes as well as line noise with this Tripp Lite Protect It! four-outlet 450-joule surge suppressor. Its diagnostic LED panel features a green light that shows you when the suppressor is working, and its 4-foot-long cord allows you to place it exactly where you need it the most. You can also mount the surge suppressor to a wall for even more convenience..Input voltage: 120 VAC (110 - 125 VAC).Input connection: NEMA 5 15P input plug.4' cord.Dimensions: 1.2"(H) x 1.85"(W) x 8.1"(D).Receptacles: 4 x NEMA 5 15R.Power: 120 VAC output voltage, 50/60 Hz, 15 A line current, 450 J surge energy rating, 22500 A max surge, 150 V RMS clamping.Form factor: Wall mountable.Material: Plastic.Protection mode: Full normal mode (H N) and co common mode (N G/H G) line surge suppression.Supports 1 large transformer plug accessory without covering remaining outlets, accepts up to 2 transformers total, built in LED confirms suppressor protection present (green) status.EMI/RFI noise filtering, lighted power switch.15A resettable combo switch/circuit breaker, single row of 4 outlets, combination AC circuit breaker and 2 position on/off power switch, 14 AWG gauge and SJT cord, strip style.Distance between slots 57.5 mm, distance between slot height 26 mm, outlets center to center measurement 28.6 mm.Application: Ideal for any desktop, network or home computing application requiring AC line protection.Includes: TLP404 surge suppressor, instruction manual with warranty information.Standards and certificates: UL 1449 3rd edition, UL1363, IEEE 587, RoHS, cUL.Weight: 1 lbs..Warranty: Lifetime limited.Tripp Lite Protect It! Four-Outlet 450-Joule Surge Suppressor - Equipment Protection

Protect your electronics and charge your portable devices at the same time using the Cordinate six-outlet surge protector. This powerful surge protector with a 4' cord features six grounded, three-prong outlets. Perfect for household electronics, appliances, tools, and more, the surge protector features an 800-joule protection rating. This surge protector is the perfect addition to any home office, entertainment center, or workspace. An integrated circuit breaker with reset switch protects your electronics if the capacity is exceeded by a power surge. The outlet extender is also equipped with twist-to-close safety covers to keep unused outlets free from dirt and debris. Featuring a blue heather pattern, the decorative, woven fabric increases the cable's durability, makes it tangle-resistant, and adds instant style to any space..Integrated circuit breaker protects your electronics if the capacity is exceeded by a power surge.Features six grounded and protected three-prong outlets for increased versatility.4' extension cord allows you to plug in appliances, electronics, and mobile devices from a distance.800-joule protection rating provides peace of mind: electronics are safeguarded from voltage spikes.Dimensions: 2"H x 4.75"W x 11.3"D.Twist-to-close safety covers keep unused outlets secure, while the protected indicator light provides at-a-glance verification that your electronics are safely and properly powered.Meets or exceeds UL standard.Comes in blue heather color.Weight: 0.91 lbs.

The GoGreen Power® 6 Outlet Wall Tap allows you to quickly turn two outlets into six outlets. The wall tap was designed using reinforced plastic for stability and to allow for bulky adapters to be used all at the same time. Each outlet is grounded and unit is UL certified to meet all industry standards. The wall tap is the ideal item to keep around your home, office and garage..Converts 2 grounded outlets into 6.Perfect for computers, lights and appliances.Plug into any 3-prong duplex outlet.15 amp circuit breaker (1875 watts).Heavy duty structure.⚠ WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harms. Wash hands after handling the product..The GoGreen Power wall tap makes it convenient to have more wall outlets available

Protect your electronics, and charge your portable devices at the same time using the Cordinate six-outlet surge protector. This 4' powerful surge protector features six grounded, three-prong outlets. Ideal for household electronics, appliances, tools, and more, the surge protector features an 800 joule protection rating and an $80,000 connected equipment plan for your electronics. This surge protector is the perfect addition to any home office, entertainment center, or workspace. An integrated circuit breaker with reset switch protects your electronics if the capacity is exceeded by a power surge. The outlet extender is also equipped with twist-to-close safety covers to keep unused outlets free from dirt and debris. Featuring a white heather pattern, the decorative woven fabric increases the cable's durability, is tangle resistant, and adds instant style to any space. Get the most from your outlet with the Cordinate six-outlet surge protector..Home/office surge provides 800 joules of protection for both home and office electronics.Features six Type-B power outlets.Extension cord allows you to plug in appliances, electronics, and mobile devices from a distance 4'.120VAC input voltage.Dimensions: 1.8"H x 4.5"W x 11.3"D.Meets or exceeds UL standard.Comes in white heather finish.Circuit breaker provides optimum power control and overload protection.Features six grounded and protected three-prong outlets for increased versatility.800 joule protection rating provides peace of mind that your electronics are safeguarded against voltage spikes.Braided fabric cord reduces bends and tangles while the flat plug saves space behind furniture and media.Twist-to-close safety covers keep unused outlets secure, while the protected indicator light provides at-a-glance verification that your electronics are safely and properly powered.Weight: 0.91 lbs.

Optimize energy usage with this power distribution unit. A load indicator LED helps protect against overloading circuits by issuing warnings based on alarm parameters you can customize as needed. With a rack-mountable design, this unit can be secured horizontally or vertically, providing easy access to equipment. Featuring a compact design, this power distributor is easy to tuck out of the way for a tidy appearance. The branch whip lets multiple devices receive power at the same time. This APC metered rack power distribution unit is flash upgradeable, letting it download changes and improvements from the network and keeping it up to date for optimal performance..Metered rack PDU provides active metering to enable energy optimization and circuit protection.208V three-phase power, input frequency: 50/60Hz; maximum total current draw per phase: 48A.Dimensions: 72"H x 2.2"W x 2"D, weight: 20.9 lbs..Input connection: 4-pin IEC-309 connector, maximum input current is up to 48A UL.Output connections: 6 IEC-320-C13 and 12 IEC-320-C19 outlets.USB port allows for firmware upgrades, CAN ports enable data transfer for future expansion options.Provide real-time remote monitoring of connected loads, user-defined alarms warn of potential circuit overloads before critical IT failures occur.Features real power monitoring, temperature/humidity sensor port, locking IEC receptacles, and ultra-low-profile circuit breakers.2-year manufacturer limited warranty.Provide circuit protection with this APC metered rack-mountable power distribution unit.

APC® Rack metered power distribution unit 2G includes real power monitoring a temperature/humidity sensor port and locking IEC receptacles. 10 kVA PDU can be accessed or configure through secure Web, SNMP or Telnet interfaces..CS8365 35 A 208 VAC.50/60 Hz frequency.Outlet connector: 36 x IEC 60320 C13, 6 x IEC 60320 C19.Power rating: 10 kVA.Cord length: 1.83 m, Number of cord/cable: 1.Output voltage: 208 VAC.Form factor: Rack mountable.Dimensions: 72"(H) x 2.2"(W) x 2"(D).Protection type: Overload protection, Management: SNMP, Telnet, Web.Temperature: 32 to 122 deg F(operating), Operating humidity: 5 - 95%.Features current meter.Provide power utilization data to allow data center managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.Include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra-low profile circuit breaker.Includes Rack PDU 2G, metered, zeroU, 10.0 kW, 208 V, (36) C13 and (6) C19, installation guide, rack mounting brackets, safety guide, serial configuration cable.Certifications and standards: cUL, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, UL, VCCI Class A, RoHS, REACH, Green compliant.Weight: 18.78 lbs..Warranty: 2 years limited.APC® Rack metered power distribution unit 2G features remote alerts to warn of potential circuit overloads and provide power utilization data to allow data center managers to make informed.

The Schneider Electric black 1.44 kVA metered rack mount power distribution unit with NEMA 5-15P input receptacles and NEMA 5-15R output receptacles provides active metering to enable energy optimization and circuit protection. This power distribution unit includes real power monitoring, a temperature/humidity sensor port, locking IEC receptacles and ultra low profile circuit breakers..Voltage: 120 VAC, Current: 15 A input, Power rating: 1.44 kVA.Comes in black color, Dimensions: 35.5"H x 2.2"W x 1.7"D.Form factor: Horizontal rackmount, toolless-mount, vertical rackmount, Rack height: 0U.Cord length: 10', Number of cord/cable: 1.Supports Web, SNMP and Telnet management.Includes input NEMA 5-15P receptacles and 10 NEMA 5-15R output receptacles.Includes real power monitoring, a temperature/humidity sensor port, locking IEC receptacles and ultra low profile circuit breakers.Contains Metered rack PDU, installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL, REACH and RoHS certifications and standards.Weight: 8.98 lbs..Comes with 2 years warranty

Liebert® Micro pod power distribution unit with power capacity of 3 kVA outputs a constant voltage of 120 VAC. Unit has 8 x NEMA 5-15R output, NEMA 5-15P input connectors for power distribution and is rack, cabinet mountable..Size: 3 1/2"(H) x 17"(W) x 3 1/2"(D).Black.For use with: Any brand of UPS system.Connections: 8 x NEMA 5-15R output, NEMA 5-15P input.Power capacity: 3 kVA.Input voltage: 120 VAC single-phase.Output voltage: 120 VAC, 50 Hz, 60 Hz.Current: 12 A output current, circuit breaker: 15 A.Operating conditions: 32 deg F - 104 deg F temp, 0 to 95% Non-condensing relative humidity, storage: -4 deg F - 140 deg F temp.Form factor: Cabinet, rack-mountable.Status indicators: "Utility/Mains" indicator illuminates amber to indicate that utility/mains power is available for the load and UPS, "UPS" indicator illuminates green to indicate the presence of UPS output power for the load.Normal - The UPS is continuously supplied available utility power by the POD, UPS output power is returned to the POD and distributed to the critical AC load through the POD output receptacles.Maintenance bypass - The bypass switch allows a transfer of the critical AC load from the UPS inverter to the utility source, to allow for service to or replacement of the UPS, without interrupting the load.Bypass switch is capable of switching up to 20 or 30 amps, based on the model of the POD. The switch is a break before make type, with a maximum transfer time of 6ms.Connection to UPS Input: 5-15R, connection to UPS Output & cord length: 5-15P on attached 6 foot cord.Complaint and standards: UL1778, cUL, ISTA Procedure 1A listed, ISO 9001.Package contents: Micro Pod 3kVA PDU, power cord - 10 ft, user manual, brackets for rack mounting.Warranty: 2 years limited.12 A microPOD power distribution unit provides maintenance bypass capability as well as power output distribution, and can be used With virtually any micro-UPS system.

The GoGreen Power® 6 Outlet side mount wall tap is the perfect item for those hard to reach places behind couches, tables, beds and more. It's unique design can quickly turn two outlets into six outlets while keeping the cords off the floor and letting your furniture finally fit flush in your home. The side mount wall tap has a built-in 15 amp circuit breaker rating at 1875 watts and can be used with polarized plugs. Look no further then the 6 outlet side mount for all your home electrical needs!.Converts 2 grounded outlets into 6.Perfect for computers, lights and appliances.Plug into any 3-prong duplex outlet.15 amp circuit breaker (1875 watts).Heavy duty structure.⚠ WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harms. Wash hands after handling the product..The GoGreen Power wall tap makes it convenient to have more wall outlets available

The GoGreen Power® Swivel Wall Tap features 6 outlets conveniently designed to fit behind furniture and appliances. The electrical tap is perfect for use with larger electronics such as computers, printers, smartphones, tablets and theater systems. The unit can be placed in any duplex outlet quickly converting two outlets into 6 outlets. The Swivel wall tap also comes with 1000 Joules of protection (please see model# GG-16310TSW)..Converts 2 grounded outlets into 6.3 Outlets on right side swivel.Saves space when using against furniture.Plug into any 3-prong duplex outlet.15 amp circuit breaker (1875 watts).Heavy duty structure.California Prop 65 Warning: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harms. Wash hands after handling the product..The GoGreen Power wall tap makes it convenient to have more wall outlets available

Suite Power Strip with 3" long cord helps to solve your every day charging needs..Features 6 outlets.Stylish Fabric Cord Design..15 Amp Resettable Circuit-breaker

Suite Power Strip with 3" long cord helps to solve your every day charging needs..Features 6 outlets.Stylish Fabric Cord Design..15 Amp Resettable Circuit-breaker

Simultaneously charge up to 12 Chromebooks, tablets, laptops, MacBooks, phones, and more with the Luxor space-saving AC charging station. Highlights include an open design that doesn't restrict device height and length; moveable divider fins that allow you to select between two slot widths for a customized fit, and compatibility with most tablets and laptops with screens up to 16". Hidden in the base is a 14-outlet UL-listed AC power strip, plus plenty of space to keep cables and power supplies neat, organized, and out of view. Grippy rubber feet keep the charging station stable and secure. Perfect as a classroom charging station and great for libraries, medical clinics, retail establishments, and any other organization in need of a space-efficient, tidy solution to keep devices powered up..12-port charging station for laptops, tablets, and mobile devices.Features a heavy-duty 14-gauge power cord, tough black ABS plastic fins, and a durable white metal base to withstand constant use.Dimensions: 10.9"H x 23.6"W x 11.8"D; weight: 19.8 lbs..Includes a UL-listed, ETL-compliant 14-outlet AC horizontal power strip, a 15A circuit breaker, an on/off switch, and a reset switch.Features an open design that doesn't restrict the length and width of devices.No assembly required.Movable divider fins allow users to select between 0.5" and 1.3" slot widths.Fully enclosed inner compartment keeps cables and power bricks tidy, organized, and out of view.Works with most laptops, tablets, phones, and their power adapters.Provides full power pass-through for incredibly fast charging.Rubber feet for stability and security.Cord length: 10'

Suite Power Strip with 3" long cord helps to solve your every day charging needs..Features 6 outlets.Stylish Fabric Cord Design..15 Amp Resettable Circuit-breaker