Serial Port Converters

This card lets you to add two RS 232 and two RS422/485 serial ports to your PC through a PCI-Express expansion slot..Interface: RS-232, 422, 485 serial.Data transfer rate: Up to 460 Kbps.Ports: 4 x 9-pin DB-9 male RS-232/422/485 serial.Form factor: Plug-in card.Platform supported: PC.Number of ports: 4.Compatibility: Windows 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows Server 2008 R2, 2003(32/64), Linux Kernel 2.6.x.Card type: Standard profile.Chipset ID: SystemBase - SB16C1052PCI.Connector type: 1 x PCIe male.Operating Temperature: 0 to 100 deg C.Dimensions: 2.7"(H) x 0.6"(W) x 5.3"(L).Standard and low-profile bracket included, supports 2-wire/4-wire RS485 modes, 256-byte deep FIFO per transmitter and receiver.Applications: Monitor and control industrial machines on an assembly line or in a production environment, Bank teller workstations in either full profile or low profile, self-service automated machines and kiosks to control serial devices.Package contents: 1 x PCIe serial combo card, 1 x breakout cable, 1 x low profile bracket, 1 x driver CD, 1 instruction manual.Weight: 2.4 oz..Certification and standards: Green compliant, CE, ROHS, FCC, PCI power management 1.1, PCI-express specification 1.0a.Warranty: Lifetime limited.Startech.Com® PEX4S232485 PCI Standard Profile Serial Combo Card is a single card solution that is compatible with nearly any serial communication protocol, supporting RS-232, RS-422, RS-485 2-wire or RS-485 4-wire operating modes.

The BLACK BOX® Universal RS-232 to RS-422/485 Converter with Opto-Isolation isolates and converts RS-232 signals into RS-422/RS-485 signals and vice versa. Unlike other converters, external software is not required to control data flow. The RS-232 input is wired for DCE through a DB9 female connector, and RS-422/RS-485 signals are interfaced through a removable terminal block. To supply external power to the terminal block, you need our 120-VAC/12-VDC Wall mount Power Supply (PS1003). For RS-232, the connection requires RD, TD, and Signal Ground. In RS-422 mode, the driver is always enabled for full-duplex communications. A twisted pair is required for transmit, and a twisted pair is also required to receive. A ground reference wire is also needed. Switch settings are Switch 1: RS-422; Switch 2: Echo On; Switches 3 and 4: 4 Wire. In both RS-485 modes, the RS-485 driver is automatically enabled during each space state by the presence of an RS-232 signal. When the RS-232 data is in a mark or idle state, the RS-485 driver is disabled and the RS-485 data lines are held in a mark state by the bias provided by a 4.7-ohm resistor; the value of this resistor may need to be changed, depending on the termination you use. To connect to several RS-485 devices with minimal wire, select the unit's 2-wire, half-duplex RS-485 mode. When data is requested, the addressed device transmits and then reverts back to receive status. Switch settings for this mode are Switch 1: RS-485; Switch 2: Echo Off; Switches 3 and 4: 2 Wire. For 4-wire master/slave circuits, select the unit's 4-wire, full-duplex RS-485 mode. In this mode, addressed devices can receive data while transmitting data from a previous request. When used as a master in a single-master system, Switch 1 may be selected because the unit is the only transmitter in the system. When used as an RS-485 slave, the RS-232 device must provide addressability. Biasing in a master/slave system is provided by the end-of-line slave. Switch settings for this mode are Switch 1: RS-485; Switch 2: Echo On; Switches 3 and 4: 4 Wire..Operates 2-wire half-duplex or 4-wire half- or full-duplex..async (data leads) only..Up to 32 RS485 devices can be attached to create a large multi-drop network.Operates in point to point or multipoint applications.Transmit data up to 115 kbps or at distances up to 4000 ft.

Connect an RS232 (DB9) peripheral to your USB-C device. This USB-C™ to serial adapter lets you connect your USB-C devices to your legacy serial equipment. It converts a USB-C port on your laptop or computer into a RS232 DB9 serial port, giving you a cost-saving way to connect to serial devices such as point-of-sale terminals, serial modems, industrial equipment, and a wide variety of other RS232 peripherals. Connect with ease The RS232 adapter cable is compatible with Windows®, macOS and Linux® operating systems, which makes it easy to integrate into mixed environments. Ready for mobile or desktop applications The USB-C to serial adapter is USB powered, so you don't need an additional external power supply. It's a compact solution that's easy to bring along with your laptop, when you're on the go. The ICUSB232C is backed by a StarTech.com 2-year warranty and free lifetime technical support..USB-C to straight-through RS232 DB9 serial adapter.High-speed 921.6Kbps baud rate.Compatible with Windows®, macOS® and Linux

Serial RS232 adapter to convert any USB port into a serial RS232 port..Features a 9-pin DB9 male RS 232 USB on one end and a Type A male USB 2.0 on the other.Male to male terminals construction requires no separate adapter.Copper conductor enables superior conductivity.Data transfer rate of 115.2 Kbps ensures speedy data transfer.Portable USB powered design requires no external power adapter.Encased in a polyvinyl chloride jacket for durability.Requires one USB 1.1 port, making it easy to connect.Has 2 terminals for enhanced connectivity.Compliant Standards: CE, FCC, RoHS.Comes with a 2-year limited warranty

The IC485SN is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. The IC485SN is a bi-directional interface converters for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations..Supports baud rates up to 115.2kbps..Cable distance of up to 1200m (4000 ft.)..Non powered operation..Compact size.

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

This versatile adapter converts an available USB 1.1 or 2.0 port into an RS232 serial DB9 port, allowing you to connect, monitor, and control your serial devices with ease. Featuring the industry-leading FTDI chipset, this adapter ensures superior compatibility and advanced features that set it apart from other solutions. One of the standout features of this adapter is its COM retention capability. The FTDI chipset automatically reassigns the same COM port value if the cable is disconnected and reconnected or if the system is rebooted, ensuring consistent and reliable performance without the need for manual configuration. This functionality makes it an ideal choice for various applications, from industrial automation to point-of-sale systems. Designed for maximum compatibility, the Rocstor Premium FTDI USB to Serial RS232 Adapter Cable works seamlessly with Windows, Mac OS, and Linux operating systems. Its single-cable design enhances portability, and being USB-powered, it eliminates the need for an external power adapter..The Rocstor Premium FTDI USB to Serial RS232 Adapter Cable is designed for data transfer, making it ideal for use with computers and serial devices..This cable is available in lengths of 3 feet (1 meter) and 6 feet (1.8 meters), providing flexibility for various installation needs..It features a 9-pin DB-9 RS-232 Serial male connector on one end and a USB 2.0 Type A male connector on the other, ensuring a secure and stable connection..Constructed with high-quality materials for durability and reliability. The true color of the cable is black..The cable has a 9-pin DB-9 RS-232 Serial male connector on one end and a USB 2.0 Type A male connector on the other, ensuring compatibility with a wide range of devices..Supports data transfer rates up to 115.2Kbps, providing efficient and stable connectivity for monitoring and controlling serial devices..Compatible with Windows, Mac OS, and Linux operating systems. For more details, refer to the extended description..Meets industry standards for USB and RS-232, ensuring reliable and consistent performance..Backed by Rocstor's 2-year warranty, providing peace of mind and reliable support for the lifetime of the product..Rocstor Premium FTDI USB to Serial RS232 Adapter Cable provides Effortless Serial Connectivity. Simplify your serial device connections with the Rocstor Premium FTDI USB to Serial RS232 Adapter Cable.

Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server is compatible with Windows 2000/XP/Vista/7/8 OS. Server allows accessing the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone..Media type supported: Twisted-pair.Max baud rate: 1,000,000 (1 MegaBaud), data bits: 5,6,7 or 8, parity: Odd, even, none, mark or space, stop bits: 1 or 2, flow control: RTS/CTS, XON/XOFF, Tx/Rx modes: Point to point, data transfer rate: 230.4 Kbps.OS required: Microsoft Windows 7 32 bit & 64 bit editions, Windows Server 2008 32 bit & 64 bit editions, Windows Vista 32 bit & 64 bit editions, Windows Server 2003 32 bit & 64 bit editions, Windows XP 32 bit & 64 bit Editions, Microsoft Windows 2000.Protocol: RS422/485, connector: DB9 connector - 9 pin male, Tx FIFO size: 4096, Rx FIFO size: 2048, operating distance: RS422/485 standard (4000 ft : 1200 meters).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX.Network/Transport protocol: TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP, remote management protocol: Telnet, HTTP, status indicators: Port status, link activity, link OK.Interfaces: 1 x 100Base-TX - RJ-45.Form factor: Rail-mountable.Storage temperature: 0 to +55 deg C / +32 to +158 deg F.Power input: 5 - 30 VDC input, reverse polarity protected, power supply: 1 description Global power supply - PW-800, power consumption: 0.77W (Typical).Web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser.Includes: 1 port RS422/485 Ethernet to serial adapter ES-320, installation CD including manual, Microsoft signed drivers & utilities, global power supply.Half-duplex configuration with autogating provides trouble-free data transmission due to automatic control of data direction.Certifications and standards: EMC: CE TAA, AEO C-TPAT, IEEE standards: 802.3, 802.3u, green compliance certificate/authority: RoHS, WEEE.Dimensions: 1.1"(H) x 4"(W) x 3.9"(D).Warranty: Lifetime limited.Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server offers data transfer rates up to 1000000 baud and has simple instant-networked serial ports.

Quickly connect legacy serial devices to Ethernet networks with a compact 1‑port server. Features include SSH v2 security, port buffering, and SNMP management for reliable console access and device monitoring..Bridges RS‑232 devices to TCP/IP networks..SSH v2 secures remote management sessions..Port buffering helps ensure data reliability..SNMP enables centralized monitoring and alerts.

Ethernet to Serial device server providing access to four RS422/485 serial ports. Data transfer rates up to 1,000,000 baud rates, coupled with 1Mbit/s line drivers deliver uncompromising performance. Our ES range provides simple instant networked serial ports. RS485 - 1 twisted pair - half duplex configuration with autogating provides trouble free data transmission due to automatic control of data direction. A web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser. For Windows our in-house designed 32 bit and 64 bit driver gives you local COM ports, retaining existing software applications and allowing you to connect across your network to remote devices just as if they were attached locally. You can access the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone. Serial Port Tunnelling individually configurable allows serial cable replacement over any distance, no software required. On Windows OS TCP/IP sockets are handled by the Winsock API, this will differ on other OSs..Network (RJ-45): Yes.Phone Line (RJ-11): No.Network (RJ-11): No

The Opengear 6" crossover serial adapter features one RJ-45 female connection on first end and one 9-pin DB-9 female connection on second end. This serial adapter has copper conductors for high conductivity and plastic housing for durability. It supports network device and modem..Crossover serial adapter allows for a variety of connection.Cable length: 6".Connections: One RJ-45 female on first end and one 9-pin DB-9 female on second end.Connectivity: Wired.Material: Copper conductor, plastic housing.Device supported: Network device, modem

USB-C to Serial Adapter for Use with All RS-232 Serial Devices This Keyspan adapter lets you connect a legacy DB9/RS-232 serial device to the USB-C port on your computer, laptop, tablet, Chromebook or MacBook. It works with switches, routers, modems, barcode scanners, GPS units, digital cameras, point-of-sale devices, lab equipment, network storage devices and other devices with a 9-pin serial port. Plug-and-Play Operation Lets You Begin Transferring Data Almost Immediately The included three-foot detachable cable supports data transfer rates up to 230 Kbps, which doubles the speed of built-in PC serial ports. The USB-C to DB9 adapter also works with any USB-C cable up to 16 feet. LEDs on the unit indicate status and data activity. No external power is needed. The unit weighs just two ounces and is easy to carry in a pocket, purse, backpack or laptop bag for instant file transfers where needed. Compatible with Major Operating Systems This USB-C to serial adapter works with Windows (up to 10), Mac OS X (up to 10.13) and Apple Sandbox applications. It's easy to upgrade via free software downloads. Windows line monitor and data trace software are included. TAA-Compliant for GSA Schedule Purchases The USA-19HS-C is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts..Comes in black.Cable data transfer rate : 0.23Mbps.Meets or exceeds RoHS and Plug and Play standards.3-year manufacturer limited warranty

USB to serial multi drop hub providing 1 RS422/485 serial port multiplexed 8 times for multibus applications. Data transfer rates up to 921,600 baud rates and the 128 byte deep transmit and 256 byte receive FIFOS, coupled with 1 Mbit line drivers deliver uncompromising performance on your laptop/PC. USB to serial is the quick low cost way to connect your computer to a serial comms enabled device..Cable data transfer rate : 0.9Mbps.Meets or exceeds IP30, RoHS, and WEEE standards.Lifetime manufacturer limited warranty

Adapter cable is well suited for connecting monitor, bar code scanners, receipt printers, satellite receiver and serial modem for easy data transfer.A convenient length of 1' for ease of installation.Has 1 xdB 9 male first end, 1 x type A female USB second end connectors for clear transmission.Comprises of copper coated conductor with plastic enclosure to render high-tensile strength.Measures 0.6"H x 1.3"W x 15.7"L.Comes in black color for a new look.Compatible to use with Mac, PC, Windows 7 / Vista / XP (32/64-bit), 2000 / ME / 98SE, Server 2008 R2 operating systems.Features bus type of USB 2.0, Chipset ID of Prolific - PL-2303 with a serial interface having a port to deliver high-performance.Supports max baud rate of 921.6 Kbps and RS-232 Serial protocol to exchange the serial data.Comprises of COM port assignments, which are maintained across reboot and is powered by an available USB port.Works well with system including PC with an available USB 1.1 (or above) port for ultimate performance.Feasibly operates at temperature rating of -10 - 80 deg C and storage temperature of -20 - 100 deg C with humidity of 5 - 85% RH.Contains USB to serial adapter, driver CD and instruction manual for added convenience.Meets CE, FCC and RoHS standards.Weighs: 2.5 oz.Comes with 2 years warranty

The Brainboxes ES-420 1-port RS422/485 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 - 1000000 baud. It features full duplex, half-duplex autogating Tx/Rx modes and has DB9 9 pin male connector. This device server offers maximum operating distance of 4000' and is compatible with Communicate with Microsoft Windows 10/8/7/Vista/XP 2000 operating systems..Drive server provides access to one RS422/485 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.74 W, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE TAA, IP-30, Green, RoHS and WEEE certifications & standards.Interface: One RS422/485, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: 4000', Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty

Brainboxes ES-571 RS232 Isolated industrial switch device server meets the most demanding dynamic computing workloads. Ethernet to serial server delivers increased performance with the exceptional memory..Measures 4.7" x 0.9" x 3.9".Has 1 port for easy connectivity.Supports 5, 6, 7 or 8 data bit characters, 1, 1.5 or 2 stop bits and odd, even, none, mark or space parity.Supports 1,000,000, Tx/Rx modes point to point, full duplex, half duplex autogating, hardware autogating data rates.Has XON/XOFF Software handshake or RTS/CTS hardware handshake types of flow control.The Ethernet Interface takes benefit of a company's pre-existing infrastructure.Supports protocols like software selectable as RS232, RS422/485 full duplex or RS485 half duplex, 4 PCB layers.Power supply is rated at typical 1.6 W, 60 mA, 24 V and maximum of 2.9 W.Includes an integrated DIN rail clip for mounting.Supports Microsoft Windows 8, Windows 7, Windows Server 2008, Vista, Server 2003, Windows XP, Linux OS.Meets AEO (C-TPAT), WEEE, RoHS, METL, FCC compliant, CE, Microsoft Certified Gold Partner certification and standards.Weighs 0.211 kg.Brainboxes RS232 1-Port Ethernet switch device server is designed to with stand demanding environmental conditions.

Use our Modem Splitter to connect three terminals to one modem and save money - you won't need extra modems and extra lines! No special cables are needed. It uses ordinary straight-pinned cables for a hookup, and includes a 6-ft. DB25 male/DB25 female extension cable and a serial DB9 female/DB25 male AT adapter. The Modem Splitter is transparent to speed and protocol and works equally well in sync and async environments. The TL073A-R4 includes (1) modem splitter, (1) 6-ft. DB25 male/DB25 female extension cable, and (1) serial DB9 female/DB25 male AT adapter. A 6-Port Modem Splitter is also available. See "Similar Products.".Data coming into the MASTER port on pin 3 of the RS232 DB25 Passive Splitter goes to all three Slave ports since they are all tied common..The total combined length of all cables connected to the unit should be less than 50 feet (15.2 m)..Signals present on the PORT connectors at pins 2, 4, and 20 are passively stored and sent to the corresponding pins on the MASTER connector..Signals present on the MASTER connector at pins 1, 3, 5, 6, 7, 8, 15, and 17 are sent to the corresponding pins on each of the PORT connectors.

The Sabrent (CB-9P6F) USB to Serial converter is the perfect solution for transferring data from a PDA or digital camera. The USB to DB9 provides a connection between an available USB port and the more traditional RS-232 serial port found on many devices. This adapter is designed for connections to cellular phones, PDAs, digital cameras, modems, or ISDN terminal adapters through your USB port. Simply plug your device into the adapter and the adapter into your PC or Mac. COM ports and Baud rates can be modified to desired set up..This cable is perfect for connecting your USB compatible devices.Cable length: 6'.USB Type-A (4-pin) to Serial DB9 (9-pin) connectors.Comes in silver.Compatible with your computer.Meets or exceeds Plug and Play and USB / USB 2.0 standards

Lantronix® UD1100002-01 1-Port Device server enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. On-board Flash memory offers room for future system software upgrades and maintenance-free, non-volatile web page storage. The built-in web server enables users to access and configure this server from a standard web browser..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports RS232, RS422 or RS485 modes, 300 to 921.6 kbps data rates and has 2 DB9 DTE serial ports for connectivity.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP and Telnet, TFTP, RFC2217.Power supply is rated at 100 - 240 VAC, 1.8 W max.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software.Box includes UD1100002-01 device server, power adapter, DeviceInstaller Software, Com Port Redirector software.Meets FCC, C/UL, CSA, VCCI, CE, TUV, Ctick certifications and standards.Weighs 0.4 kg.Comes with 2 years limited warranty.Includes UD1100002-01 device server, device installer software, com port redirector software.Weight: 7.05 oz..Black.Lantronix® 1-Port Device server is a quick, simple & inexpensive way to bring the advantages of remote management to equipment. Delivers increased performance with the best memory.

Lantronix® UD1100IA2-01 1-Port Serial to ethernet industrial device server is a rugged and powerful tool that enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet. In minutes, securely connect factory floor devices to enterprise systems. Support RS-232, RS-422 and RS-485 communications..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports a baud rate of 300 bps to 230 Kbps.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity, XON/XOFF (software), CTS/RTS (hardware) types flow control.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP,UDP,TCP, ICMP,Telnet,TFTP, AutoIP,DHCP,HTTP, SNMP, TCP,UDP and Telnet,TFTP.Power supply is rated at 9 - 30 VDC, 3.3 VDC on serial interface.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ softwares.Supports Lantronix DeviceInstaller GUI, Serial login,SNMP, Telnet login,HTTP management.Box includes UDS1100-IAP industrial device server, 500-163 serial cable.Meets UL, CSA, FCC, CE,TUV, CTick,VCCI certifications and standards.Weighs 0.20 kg.Comes with 2 years limited warranty.Weight: 7.05 oz..Black.Lantronix® 1-Port Device server is a quick, inexpensive & simple way to bring the advantages of remote management to equipment. Delivers increased performance with the best memory.

The Lantronix SLC 8000 FRRJ451601 16-port RS-232 RJ-45 I/O module offers secure remote access to IT equipment, while reducing deployment costs and time. It requires 100 - 240 VAC power supply. It consumes less than 30 W power. It has 16 RJ-45 serial RS-232, dual 10/100/1000 base, USB 2.0, SD and SDHC card slot. It works on Embedded Linux platform. It features performance monitoring utility, packet generation utility, network trace utility and configuration audit log. This I/O module measuring 1 3/4" x 17 1/4" x 12", provides flexibility and efficiency of SLC 8000 deployments..I/O module provides secure remote access to IT equipment.Dimensions: 1 3/4"H x 17 1/4"W x 12"D.Power supply: 100 - 240 VAC, 50 to 60 Hz (single or dual), -20 to 72 VDC (dual), Power consumption: Less than 30 W.Interfaces/ports: 16 x RJ-45 Serial RS-232, dual 10/100/1000 base, 300 - 230400 bps, USB 2.0, SD and SDHC card slot.System: Embedded Linux.Management: Command line interface, Quick setup and configuration web interface (SSL), SNMP (MIB II) compatible-v1, v2, v3, custom MIB’s.Security & authentication: Secure shell (SSH v1, v2, public key), secure sockets layer (SSL v3, TLS v1), Remote authentication LDAP, RADIUS, Kerberos.Protocols supported: DHCP and BOOTP for dynamic IP address assignment, FTP, TFTP, SFTP, SCP client for file transfers, IPsec/VPN, RIP and RIPv2.Features performance monitoring utility, packet generation utility, network trace utility and configuration audit log.Provides flexibility and efficiency of SLC 8000 deployments while reducing time as well cost required to develop and deploy IT services.Contains one I/O module extractor and a RJ-45 loopback cable.Meets FCC Part 15, CE (EN55022, EN55024, EN60950), CSA, VCCI, UL/cUL, C-Tick, CB Scheme, NIST certifications and standards.Weight: 11.1 lbs..Comes with 3 years limited warranty

Lantronix® UD1100001-01 1-Port Serial to IP ethernet device server enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. Replace dedicated PCs and modem lines with fast and reliable Ethernet networking. It features TruPort Com port control technology for better performance..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports RS232, RS422 or RS485 modes, 300 to 921.6 kbps data rates and has 2 DB9 DTE serial ports for connectivity.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP and Telnet, TFTP, RFC2217.Power supply is rated at 110 VAC, 1.8 W max.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software.Box includes UD1100001-01 device server, DeviceInstaller software, Com Port Redirector software.Meets FCC, C/UL, CSA, VCCI, CE, TUV, Ctick certifications and standards.Weighs 0.4 kg.Comes with 2 years limited warranty.Black.Lantronix® Device server features Fast Ethernet technology that offers better performance. It supports RS232, RS422 and RS485 communications.

Connect devices with a 9-pin RS-232 serial port, such as PDUs, network switches and console servers, to the USB-A port on your computer or laptop. This USB-to-Serial cable (M/M) connects a 9-pin RS-232 (DB9) serial device to a USB-A port on your desktop computer or laptop. It connects modems, PDUs, network switches, console servers and other serial devices at data transfer speeds up to 230 Kbps, which is twice as fast as a built-in serial port. The compact five-foot (1.5-meter) cable fits easily inside a backpack or laptop bag for use almost anywhere. The U209-000-R blocks disruptive EMI (electromagnetic interference) and RFI (radio frequency interference) line noise that can disturb your network equipment and inflict hardware damage or data loss. Premium double-shielding eliminates crosstalk and helps your connected components perform better and last longer. This RS-232 cable requires no external power source and supports remote wake-up and power management. It works with most major operating systems, including Windows 2000 through 11, macOS 10.6 through 12.4 and Linux Redhat 7.3, 8.0 and 9.0.Supports data transfer rates up to 250 Kbps—2x the speed of a built-in serial port.Premium double-shielded cable eliminates crosstalk and reduces EMI/RFI line noise.Portable design fits comfortably inside a backpack or laptop bag.Compatible with Windows, macOS and Linux operating systems.Plug-and-play with no external power required for easy, immediate installation.3-year limited warranty.TripLIte 5 ft. (1.5 m) USB-A to RS-232 (DB9) Serial Adapter Cable (M/M)

Enhance network connectivity with the Digi TS DB-9M to RJ-45 Modem Adapter. Designed for efficiency and usability, this adapter offers fast, reliable performance and easy replacement for added convenience..RJ-45/Serial adapter is easy to be replaced.Ensures superior functionality: Enhance network connectivity with the Digi TS DB-9M to RJ-45 Modem Adapter. Designed for efficiency ....Plug-and-play setup eliminates the need for additional drivers or software..Compatible with a wide range of devices for versatile applications.

Brainboxes Ethernet to 4 Digital IO and RS323 serial port device server supports fast ethernet technology with 10/100Base-TX network standard. Server delivers uncompromising performance of up to 1 megabaud and is rail-mountable..Serial port, network (RJ-45).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX, media type supported: Twisted-pair.Interface: 2 x RJ-45, 1 x serial port.Form factor: Rail-mountable.Power consumption: Input: 5 - 30 VDC, 100mA at 24 V 2.5 W (max).Digital inputs: 4, digital output type: Open drain transistor, protected MosFET, short circuit protection up to 36V, over temperature shutdown -175 deg C typical 150 deg C (min).Latched inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged.Counter inputs: User programmable- counts positive or negative transitions up to 100Hz.Watchdog: Active high/low, pulsed high/low.Logic level 0: 0 - 1 V, logic level 1: 2 - 30 V.Maximum output load voltage: 30 - 250 VAC, maximum output current sink: 5.0 A per channel.Operating systems: Windows server 2008 32 bit & 64 bit editions, windows vista 32 bit & 64 bit editions, mac OS X, windows server 2003 32 bit & 64 bit editions, windows XP 32 bit & 64 bit editions, microsoft windows 2000, Linux.Operating temperature: 0 - 60 deg C.Includes ED-004 4 Port Selectable DIO + RS232, installation CD (manual, Microsoft signed drivers & utilities, quick-start guide).Certifications and standards: CE, CCC-mark, C-TICK, RoHS, WEEE.Warranty: Lifetime limited.Brainboxes Ethernet to 4 Digital IO and RS323 serial port device server is supported with twisted pair media and has a RJ-45 network port.

Reduce line costs by sharing a single modem and phone line between two RS-232 devices. Transparent operation up to 64 kbps with LED monitoring and front-panel RTS enable switches keep control simple. Antistreaming circuits lock out streaming ports, and support for IBM protocols including bisynchronous and SDLC expands use cases..LED indicators and RTS switches simplify control.Antistreaming circuitry improves reliability.Supports common IBM communications protocols

Brainboxes Device server has wide operating voltages of 5 - 30 VDC input. Server features data transfer rates of up to 1000000 baud and coupled with 1 Mbps line drivers which deliver uncompromising performance..Network Certificates and standards: 10Base-T/100Base-Tx.LAN Ports: Ethernet 10Base-T/100Base-Tx.Connectivity technology: Wired.Protocol: Ethernet, fast ethernet, RS-232, RS-422, RS-485 data link, TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP network/transport.Form factor: DIN rail mountable.Status indicators: Port status, link activity, link OK.Voltage required: 5 - 30 VDC.Power consumption: 2.9 W.OS required: Microsoft Windows 2000/2008/2003 Server, Windows Vista/7/xP/ (32/64 bits).Operating distance: RS422/485 standard (4000 ft : 1200 metres) / EIA - RS232.Max baud rate: 1000000 baud.Features: Flow control, full duplex capability, auto-uplink (auto MDI/MDI-x).Operating tempreature: 176 - -22 deg F.Operating humidity range: 5 - 95 (non-condensing).Certifications and Standards: ISO 9001, ISO 14001, EMC, RoHS, WEEE, IEC 60529 IP30.Warranty: lifetime.Brainboxes Device server has removable screw terminals blocks for easy wiring and supports legacy software using COM port interfacing.

Seamless Connectivity with Rocstor's USB to Serial Adapter Bridge the gap between legacy serial devices and modern USB ports with the Rocstor USB to Serial Cable. This premium adapter features a DB9 male RS232 connector and a USB A connector, making it easy to connect your older serial devices to newer computers without the need for upgrades. Key Features: USB to RS232 Adapter: Connects legacy RS232 serial devices to modern USB ports, ensuring compatibility and extending the life of your equipment. COM Port Retention: Maintains assigned COM port values across reboots and reconnections, providing seamless and hassle-free operation. High-Speed Data Transfer: Supports data transfer rates up to 921.6 Kbps, ensuring efficient and reliable communication. USB-Powered: No need for an external power adapter; the cable is powered directly by the USB port for convenience. Dual Buffers: Equipped with dual buffers for efficient upstream and downstream data transfer, enhancing performance. Remote Wake Up and Power Management: Supports automatic handshake mode and power management control for optimal functionality. Broad Compatibility: Works with Windows, Linux, and Mac OS, making it a versatile solution for various operating environments. Warranty: Backed by Rocstor's 2-year warranty and free lifetime technical support, ensuring peace of mind and reliable service..Designed for data transfer, this cable connects legacy RS232 serial devices to modern USB ports, ensuring compatibility and extending the life of your equipment..The cable measures 1 ft (0.3 m), providing a compact and convenient length for easy installation..Features a USB A connector and a DB9 male RS232 connector, ensuring secure and reliable connections..Constructed with high-quality copper conductors and a durable PVC jacket, this cable is built to last. The true color is black, making it easy to identify..Terminal Type 1: 1 x USB A – Male; 1 x DB9 RS232 Serial – Male.Supports data transfer rates up to 921.6 Kbps, ensuring efficient and reliable communication..Compatible with Windows, Linux, and Mac OS. For a full list of compatible operating systems, refer to the extended description..Meets industry standards for reliable performance and durability..Backed by Rocstor's 2-year limited warranty and free lifetime technical support, ensuring peace of mind and reliable service.

Effortlessly connect your modern computer to legacy serial devices with the Rocstor 3ft USB to Serial Cable. This versatile adapter is perfect for IT professionals, industrial applications, POS systems, AV setups, and more. Easily connect RS232 (DB9) devices to your computer using this USB to serial adapter. The screw-lock nuts on the male serial DB9 connector ensure a secure connection. With a 3 ft (0.91 m) cable length, you have the flexibility to position your peripherals exactly where you need them. Ideal for connecting and monitoring serial devices such as barcode readers, network switches, receipt printers, PLCs, medical devices, oscilloscopes, and scales. Suitable for IT applications, industrial control, logistics, POS, AV installations, laboratories, and more. Maintain the use of legacy hardware with modern systems. Featuring a max baud rate of 921.6 Kbps, 512 Byte FIFO, and compatibility with Windows, macOS, and Linux. The integrated Prolific PL2303 chipset ensures reliable performance. Backed by Rocstor's limited lifetime warranty and free technical support, you can trust in the quality and longevity of this cable. Upgrade your connectivity with the Rocstor 3ft USB to Serial Cable and enjoy seamless communication between your modern and legacy devices..Ideal for data transfer, this cable is perfect for connecting and monitoring serial devices such as barcode readers, network switches, receipt printers, PLCs, medical devices, oscilloscopes, and scales..The cable measures 3 feet, providing ample length for flexible positioning of peripherals..Features a USB 2.0 Type A male connector on one end and a 9-pin DB-9 RS-232 serial male connector on the other end, ensuring a secure and reliable connection..Constructed with high-quality copper conductors and a durable PVC jacket, this cable is designed for optimum performance and reliability. The true color is black..Terminal type 1: 1 x USB 2.0 Type A male connector. Terminal type 2: 1 x 9-pin DB-9 RS-232 serial male connector..Supports a maximum baud rate of 921.6 Kbps, ensuring fast and efficient data transfer between your computer and serial devices..Compatible with Windows, macOS, and Linux operating systems. For more details, refer to the extended description..Complies with industry standards for USB to serial cables, ensuring reliable and consistent performance..Backed by Rocstor's limited lifetime warranty, providing peace of mind and assurance of quality..Bridge the Gap Between Modern and Legacy Devices with Rocstor 3ft USB to Serial Cable

Effortless Serial Connectivity with Rocstor's Premium USB to Serial Adapter Upgrade your connectivity with the Rocstor 1 Port FTDI USB to Serial RS232 Adapter Cable. This high-quality adapter converts an available USB 1.1 or 2.0 port into an RS232 serial DB9 port, making it easy to connect, monitor, and control your serial devices. The standout feature of this adapter is its COM retention capability, which ensures that the same COM port value is automatically re-assigned if the cable is disconnected and reconnected or if the system is rebooted. This functionality guarantees consistent and reliable performance, minimizing the need for manual configuration. The adapter is compatible with a wide range of operating systems, including Windows, Mac OS, Linux, and Windows CE, making it easy to integrate into mixed environments. Its single-cable design enhances portability, and being USB-powered, it eliminates the need for an external power adapter, simplifying your setup and ensuring quick and easy serial port expansion. Whether you're connecting industrial equipment, legacy peripherals, or performing data transfers, the Rocstor 1 Port FTDI USB to Serial RS232 Adapter Cable is the perfect solution for reliable and efficient connectivity. Trust Rocstor for quality and performance that stands the test of time..Designed for data transfer, this cable converts a USB 1.1 or 2.0 port into an RS232 serial DB9 port, enabling you to connect, monitor, and control serial devices effortlessly..The cable measures 6 ft (1.8 m), providing ample length for flexible and convenient installation..Features a USB 2.0 Type A connector and a 9-pin DB9 male RS232 connector, ensuring secure and reliable connections..Constructed with high-quality copper conductors and a durable plastic jacket, this cable is built to last. The true color is black, making it easy to identify..Terminal Type 1: 1 x USB 2.0 Type A – Male; 1 x DB9 RS232 Serial – Male.Supports data transfer rates up to 115.2 Kbps, ensuring efficient and reliable communication..Compatible with Windows, Mac OS, Linux, and Windows CE. For a full list of compatible operating systems, refer to the extended description..Meets industry standards for reliable performance and durability..Backed by Rocstor's 2-year limited warranty and free lifetime technical support, ensuring peace of mind and reliable service.

Convert async RS232 to RS422/485 at speeds up to 19.2 kbps with distances up to 4000 ft over CATx cables. These devices are great for connecting RS232 devices into an existing RS422/485 environment in factory automation, building automation, and process automation. They can be mounted using DIN Rail and can withstand operating temperatures of -40 to 176 degrees F (-40 to 80 C)..Optically isolates and converts unbalanced half- or full-duplex RS-232 signals to optically isolated and balanced full-duplex RS-422 or 2-wire half- or 4-wire full-duplex RS-485..Powered by 10-30 VDC, 100 mA.2-wire half-duplex or 4-wire full-duplex, RS-422 Full-duplex.Async (data leads) only..Withstands operating temperatures of -40 to 176 degrees F (-40 to 80 C).

Lantronix® ED1100002-01 1-Port Secure serial to IP ethernet device server meets the most demanding dynamic computing workloads. It delivers increased performance with the exceptional memory..Measures 0.9"H x 2.5"W x 3.5"D.Runs on high performance 32-bit processor for reliable performance.Has 8MB SDRAM with 8MB flash memory for optimum storage.Supports twisted pair media.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports software selectable RS232, RS422 or RS485, software selectable RS485/422 termination and biasing modes.Has 1 x Network (RJ-45) port for easy connectivity, has XON/XOFF types flow controls, supports CTS, RTS, DTR/DCD modem control signals.Operates in 10BaseT and 100Base-TX Link network using HTTP, HTTPS, FTP, TFTP, Telnet, TCP/IP, UDP/IP, LPD,DHCP protocols.Supports security protocols like SSL v3, SSH v2 client & server.Power supply is rated at 9 - 30 VDC, 1.8 W maximum.Supports desktop form factor.Supports Windows 98/NT/2000/XP/Vista-Based DeviceInstaller™, ComPort Redirector™, Secure ComPort Redirector softwares.Supports internal web manager, CLI, XML configuration records via CLI or FTP, DeviceInstaller software management.Meets FCC part 15, subpart B, Class A, EN55022, Class A, EN55022 and EN55024, EN61000-4-2, EN6100-4-3 certifications and standards.Weighs 0.20 kg.Comes with 2 years limited warranty.Gray.Lantronix® 1-Port Secure serial to IP ethernet device server has the ability to with stand demanding environmental conditions.

Lantronix® Xdirect SGL port device comes with an c Ethernet port and serial cable, multiple power options. Port device provides a portable, extremely flexible and highly affordable network connectivity solution..Interfaces/ports: 10Base-T /100Base-T (auto-sensing), DB9F (DCE pinned).Dimensions: 9 1/2"(H) x 1.3"(W) x 1.1"(D).Modes: RS232, RS422* or RS485* (2 and 4 wire support).Baud rate: 300bps to 921.6 Kbps.Characters: 7 or 8 data bits, stop bits: 1 or 2.Parity: Odd, even, more.Control signals: CTS/RTS (hardware).Flow control: CTS/RTS, XON/XOFF.Connector: RJ45.Protocols: UDP, TCP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, HTTP, Telnet com port control.Power/status, link, activity, serial RX activity and TX activity.CPU: Based on DSTni-EX enhanced 16-bit x86 architecture.Memory: 256 KB SRAM, 1 MB flash.Input voltage: 5 V at mini-USB-B jack, input voltage: 5 - 15 VDC at DB9F pin 9.128/192/256-bit AES encryption.Environmental conditions: -40 - 85 deg C non-PoE models, -40 - 70 deg PoE model, humidity: 0% - 90% non-condensing.Weight: 0.15 lbs..Warranty: 5 years limited.Lantronix® Xdirect SGL port device is a compact serial-to- Ethernet device server and offers quick as well as easy Ethernet connectivity to virtually any device or machine with a serial interface.

The Brainboxes US-101 Serial Adapter is perfect for everyday use..Device Type: Serial adapter.Packaged Quantity: 50 (specifications are for single item).Form Factor: External.Interface (Bus) Type: USB 2.0.Ports: RS-232.Dimensions (WxDxH): 1.4 in x 3.5 in x 0.8 in.Weight: 0.88 oz.Data Link Protocol: RS-232.Data Transfer Rate: 921.6 Kbps.Compliant Standards: USB 2.0.System Requirements: Microsoft Windows Server 2003, Microsoft Windows Server 2008, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits).Microsoft Certification: Compatible with Windows 7.Manufacturer Warranty: Limited lifetime warranty

This genuine Zebra accessory adds both Ethernet (10/100Base-TX) and RS-232 Serial ports, enabling reliable wired networking and serial communication for high-performance label printing. Whether you need to integrate your printer into a secure wired network or connect to legacy systems, this module ensures seamless and stable data transfer. The compact, lightweight design fits perfectly into the printer without adding bulk, maintaining a clean and professional setup. Installation is quick and hassle-free, allowing you to upgrade your printer without technical complexity or downtime. Specifically engineered for Zebra ZD620T printers, this module works across all major operating systems supported by Zebra printers, including Windows, Linux, and Mac OS. Built to Zebra’s high standards for durability and performance, this upgrade module is a cost-effective way to extend the functionality of your existing printer rather than investing in a new device. Backed by Zebra’s warranty and support, it offers peace of mind and long-term reliability. Enhance your printer’s connectivity today and keep your operations running smoothly with the Zebra Ethernet/Serial Upgrade Module..This is a genuine Zebra upgrade module designed to add Ethernet and Serial connectivity to Zebra ZD620T thermal transfer printers.Lightweight and compact design that integrates seamlessly into the printer.Specifically designed for Zebra ZD620T performance desktop printers.Compatible with all major operating systems supported by Zebra printers, including Windows, Linux, and Mac OS environments.Adds both Ethernet (10/100Base-TX) and RS-232 Serial ports for versatile wired networking options.Upgrade your Zebra ZD620T thermal transfer printer with the Zebra Ethernet/Serial Module, designed to provide enhanced connectivity and flexibility for your business operations.

Perle 04030124 Iolan DS1 1-Port Device server is suitable for serial to Ethernet connectivity applications. It features next generation IPv6 technology that makes it perfect for applications that require remote device/console management, data capture or monitoring. Server is designed to meet the most demanding dynamic computing workloads..Measures 0.9"H x 2.5"W x 3.5"D.Runs on MPC852T 66 MHz 87MIPS processor for reliable performance.Has 16MB memory for optimum storage.Has 1 port for easy connectivity.Has 50 bps to 230 Kbps, DB25M, DB25F, DB9M or RJ45 connectors for convenient connectivity.Supports EIA-232 full duplex, EIA-422 full duplex, EIA-485 4 wire, full duplex, EIA-485 2 wire, half duplex interface modes.Has 1 x serial port for easy connectivity.Operates in 1 x 10/100 RJ45 network for providing superior performance.Supports protocols like IPV6, IPV4, TCP/IP, CIDR, ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP.Power supply is rated at 9 - 30 VDC, 4.8 W.Comes in black color for sophisticated look.Has power/ready, link status/lan speed, network link activity indicators for convenience, Supports Tx and Rx serial data.Supports Web browser, Perle DeviceManager software to manage multiple device servers.Box includes CD, quick start guide.Meets FCC Part 15A, CE, CSA, UL 1950, EN 55022 Class A, EN 60950 certifications and standards.Weighs 0.35 kg.Comes with lifetime limited warranty.Warranty: Lifetime limited.Perle Iolan DS1 1-Port Device server with a 66 MHz processor speed offers better performance. It delivers increased performance with the best memory.

A secure, reliable 32‑port RS‑232/422/485 terminal server for serial‑to‑IP connectivity. Ideal for data centers and industrial sites, it supports flexible configuration, remote management, and robust isolation features..Consolidates up to 32 serial ports on Ethernet..Supports RS‑232/422/485 across diverse devices..Web/Telnet configuration with centralized tools..Rugged design for enterprise and industrial use.

Quickly and easily add a serial port to your desktop to connect to your serial and parallel peripherals with the HP USB Serial Port Adapter, which plugs into any USB port on your PC..Transfer data in a snap.Serial and USB ports for instant connectivity.1 x 9-pin DB-9 Female RS-232 Serial establishes rapid connection with a PC

Digi® PortServer® 70002043 TS 2-Port RS232 Device server has patented RealPort COM port redirector technology that makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer. Great for applications requiring COM ports or where TCP/UDP Sockets or UDP multicast functionality is required. It provides standard serial-to-Ethernet connectivity simply and reliably. Server is wall mountable for convenient usage..Measures 3.33" H x 5.25"W x 0.95"D.Has 2 ports for easy connectivity.Has link, power, activity, status LEDs.Has 3 x Network (RJ-45) port for easy connectivity, offers up to 230 Kbps throughput, supports signal for TXD, RXD, RTS, CTS, DTR, DSR, DC.Operates in fast ethernet technology, 1 RJ-45 10/100 Mbps 10/100Base-T network and full or half duplex communication for superior performance.Supports protocols like UDP/TCP, DHCP/RARP/ARP-Ping for IP address assignment, PPP, extended telnet RFC 2217, telnet.Power supply is rated at 9 - 30 VDC with locking barrel power connector, typical 4 W and maximum of 6 W.Supports wall-mountable form factor.Supports device-initiated patented RealPort® COM port redirector, Operating systems: AIX, HP-UX, Linux®, SCO® OpenServer™ 5 softwares.Supports HTTP/HTTPS, CLI, Digi Port Authority-Remote management diagnostics and auto-discovery tool management.Box includes PortServer TS 2 device server, power supply, RJ-45/DB-9F crossover cable.Meets UL/CUL 60950, IEC 60950 & CB, CE, FCC part 15 (Class A), EN55024, EN55022 Class A certification and standards.Weighs 2.25 oz.Weight: 2.25 oz..Warranty: 5 years limited.Digi® PortServer® TS 2-Port RS232 Device server features fast Ethernet technology that offers better performance. Delivers increased performance with the best memory.

Lantronix Single port device server provides a portable, extremely flexible and highly affordable network connectivity solution. Server features serial data rate of up to 921.6 Kbps..Network Certificates and standards: 10Base-T/100Base-Tx.LAN Ports: Ethernet 10Base-T/100Base-Tx.Wired router security: 128-bit AES, 192-bit AES, 256-bit AES encryption.Connectivity technology: Wired.Protocol: Ethernet, fast ethernet, RS-232, RS-422, RS-485 data link, TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP network/transport, SNMP, Telnet, HTTP, TFTP remote management.Form factor: External.Status indicators: Power, status, link/activity, serial.Power consumption: 2 W.OS required: Microsoft Windows 2008/2003 server, Windows Vista/7/xP/ (32/64 bits).Data rate: 300 bps - 921.6 kbps, 10 Mbps, 100 Mbps.Features: Flow control, auto-sensing per device, DHCP support, 15 KV electrostatic discharge protection.Operating tempreature: 70 - -40 deg C.Processors: 1 x installed, 256 KB SRAM, 1MB flash memory installed.Certifications and Standards: VCCI, C-Tick, EN 61000-3-2, EN 61000-3-3, EN55024, CISPR 22, EN55022 Class B, FCC Part 15 B, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, IEEE 802.3af.Lantronix Single port device server is a sleek and compact serial-to- Ethernet device server providing quick and easy Ethernet connectivity to virtually any device or machine with a serial interface.

The Digi™ 70001919 portserver® TS H MEI 4-port device server is suitable for serial-to-Ethernet connectivity in utility plants, pipelines, traffic management facilities and other remote locations requiring extended operating temperatures. This device is perfect for network-enabling and remotely managing variable message signs, loop detectors and RS-232/422/485 serial device..Dimensions: 1"H x 3.3"W x 5.3"D.Compatible with PC, Unix.Ethernet technology: Fast Ethernet.Form factor: External.Wired connectivity.Number of serial ports: 4.Interface: 1 x RJ-45 (serial), 3 x RJ-45 (RS-232).Data link protocol: Ethernet, fast Ethernet, PPP, RS-232, RS-485, network transport protocol: TCP/IP, UDP/IP, remote management protocol: HTTP, SNMP.Data transfer rate: 230 Kbps, Status indicators: Link activity, power.ARP support, DHCP support, Flow control, RARP support.Authentication method: Secure Shell v.2 (SSH2), Encryption algorithm: SSL, TLS.CSA, cUL, EN55022, EN55022 Class A, FCC Class A certified, UL 60950 standards.Digi® Portserver TS 4-Port device server delivers high-performance serial-to-Ethernet connectivity and is designed to with stand demanding environmental conditions.

The Lantronix® EDS2100 hybrid Ethernet terminal and multiport device server which allows remote access to and management of virtually any IT/networking equipment or edge device such as medical equipment, POS terminals or security equipment. The EDS1100 device server converts your RS232/422/485 serial port to a high speed networked 10/100 Ethernet port. The server features Lantronix powerful evolution OS®, with AES, SSH and SSL built in, which allows EDS device server to provide enterprise-level security for safe remote access and management from practically anywhere. It has dual-port 2 x DB9M serial connectors..Desktop server offers reliable and efficient performance.Features 32-bit processor and 8MB SDRAM for high-performance.Flash memory: 8MB.Dimensions: 0.9" x 2.8" x 3.7".Connectivity interface: two DB9M, 10BaseT and 100Base-TX Link network interface.Power: 120/230 VAC input voltage, 1.8 W power consumption external power adapter.Certifications: FCC Part 15, Subpart B, Class A, EN55022, Class A, EN55022 and EN55024, ICES-003 Issue 4, AS/NZS CISPR22, VCCI, CE, C-Tick.ARP support, BOOTP support, syslog support.Nominal voltage: 120/230 VAC, Power consumption: 1.8 W.Media type supported: Twisted pair.Authentication method: Secure Shell v.2 (SSH2), Encryption algorithm: AES, SSL 3.0.Meets AES, C-Tick, CISPR 22, CSA C22.2 No. 60950-1-03, EN 61000-4-11, EN55022 Class A, EN55024, FCC Class A, FCC Part 15, ICES-003, RoHS, U standards.Supports Windows 98/NT/2000/XP/Vista-Based DeviceInstaller™, ComPort Redirector™, Secure ComPort Redirector softwares.Supports internal web manager, CLI, XML configuration records via CLI or FTP, DeviceInstaller software management.Meets FCC part 15, subpart B, Class A, EN55022, Class A, EN55022 and EN55024, EN61000-4-2, EN6100-4-3 certifications and standards.Weighs 0.40 kg.Comes with 2 years limited warranty.Gray.Lantronix® 2-Port Secure serial to IP ethernet device server has the ability to with stand demanding environmental conditions.