Serial Connector Adapters

The 4XEM DB9 Adapter is a serial 9-pin gender changing adapter featuring 1 x 9-pin DB-9 male connection on one end and a 1 x 9-pin DB-9 female on the other to enable converting a 9-pin serial male connection to a 9-pin female connection. Thanks to the high-quality built of this DB9 serial adapter, it offers a long service life..Gender changer DB9 to DB9 adapter for converting a 9-pin male connection to a 9-pin female one.Can be coupled with two 9-pin cables featuring female serial ports for connecting devices.Premium-quality built for durability.Comes with a limited lifetime warranty.The 4XEM DB9 Serial 9-pin Male To Female Adapter enables coupling with two 9-pin cables featuring female serial ports to ensure a secure connection.

Brainboxes 2-Port 9-pin DB-9 male RS422 to serial adapter is an effective solution to extend your device connectivity and provides two RS422/485 serial ports to offer peak performance. Delivers uncompromising performance on your laptop/PC with 128 byte deep transmit and 384 byte receive FIFOS coupled with 1Mbit line drivers. Supports 32 bit and 64 bit operating systems that includes Windows XP/Server 2003/Vista/Server 2008/Windows 7/8. Comes with IP-30 rated enclosure for added durability and protection..Serial adapter that is compatible to connect with various devices.USB for quick data-transmission.Full duplex, half duplex autogating modes for transmission, reception.Compatible with Microsoft Windows 8/7/Server 2008/Vista/Server 2003/XP OS.Includes US-313 x USB 2 port RS422/485 1M baud, installation CD including manual, Microsoft signed drivers and utilities.Measures 1.1" x 4.1" x 4".Copper offers good conductivity.Lifetime limited warranty.Meets WEEE, RoHS certification and standards.Weighs 4.06 oz.Brainboxes 2-Port 9-pin DB-9 male RS422 to serial adapter enhances productivity by connecting your computer to serial comms enabled devices. Transfers at 480 Mbps data rate.

This RS232 Serial Adapter Card lets you add an RS232 DB9 serial port to your computer through a PCI Express (PCIe) slot. It enables you to interact with serial devices such as card readers, printers, PIN pads, and modems, at speeds of up-to 921.4Kbps. With broad OS support, including for Windows and Linux, this PCI Express card is easy to integrate into mixed environments. The card comes pre-configured with a low-profile bracket, and includes an optional full-profile bracket, so installation is easy regardless of the case form factor..One-port RS232 serial adapter card with 16950 UART.Dimensions: 3.9"H x 2.6"W x 5.9"D.Features one PCI Express x1 male, one DB-9 (9-pin, D-sub) male, and one LP4 (4-pin; large drive power) male input.Meets or exceeds RoHS and REACH standards.Offers to add RS232 DB9 capabilities without purchasing a new server or computer.Maximizes case form factor integration with a low-profile or full-profile bracket.High-speed data transfer rates up to 921.4KB/s.Supports 256-byte depth FIFO per transmitter and receiver.Weight: 1.6 oz..Card type: low profile.Chipset ID: ASIX AX99100.Interface: serial.Compatible with Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016; Linux 2.4.x to 2.6.x LTS versions only.Lifetime manufacturer limited warranty

The Plugable 2' serial adapter features one Type A male USB connector on first end and one DB-9 male serial connector on second end for enhanced connectivity. This adapter supports PDA, GPS, router, modem and printer. It works well with software such as HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux and more. The adapter comes with driver CD and quick installation guide..USB To RS-232 Serial - Connect legacy DB-9 serial communications devices to a modern computer with USB.Legacy Support - Add a 9-pin DB9 RS-232 serial port to any modern computer, replaces built-in or PCIe serial adapters, recommended for use with a serial cable or NULL modem cable.Compatibility Guarantee - Genuine Prolific PL-2303HXD Chipset for widest possible compatibility with Windows (11, 10, 8.x, 7, Vista, and XP), Mac, Linux, and other platforms.Flexible - Programmable baud rate from 75 bits per second to 128,000 bits per second. Plug-and-play creation of a COM port. Powered by USB; no external power needed.Warranty and Support - Questions only an expert can answer? When you contact our support team, you’re connecting with the engineers who design our devices. Every Plugable product is backed by our Seattle-based support team–even before purchase, and a 2-year limited parts and labor warranty after purchase.Device supported: PDA, GPS, router, modem, printer.Works with software like: HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc.Drivers available for Windows 98, XP, 2K, Vista, Windows 7 and Windows 8 (all versions), Mac OS 8, 9 and Max OS X, Linux kernels 2.6.11 and later.Contains driver CD and quick installation guide

Brainboxes USB to serial adapter features drivers for all popular operating systems including Windows 8. Adapter has external form factor and is PC platform supported with 2 x 9-pin DB-9 male RS-232 serial ports..USB 2.0.Data transfer rate: Up to 921600 baud, USB 2.0: 480 Mbps.Ports: 2 x 9-pin DB-9 male RS-232 serial.Dimensions: 4" x 4.1" x 1.1".Form factor: External.Power consumption: 100mA at 3.3V.Serial port: Ports: 2, Protocol: RS232, Connector: DB9 connector - 9 pin male, Tx FIFO size: 128, Rx FIFO size: 384.Operating distance: EIA - RS232 standard, Tx FIFO size: 128, Rx FIFO size: 384.Max baud rate: 921600, Data bits: 7 or 8, Parity: odd, even, none, mark or space, Stop bits: 1 or 2, Flow control: RTS/CTS, DSR/DTR, Xon/Xoff.Tx/Rx modes: Point to point.PCB layers: 4.Platform supported: PC.Operating system: Microsoft Windows 7/Server 2008/Vista/Server 2003/XP/2000.Certifications and standards: RoHS, WEEE.Weight: 3.84 oz..Warranty: Lifetime limited.Black.Brainboxes USB to serial adapter has data transfer rates up to 921.60 Kbps and features high retention USB socket.

Brainboxes 1 Port USB to serial adapter has type A male USB connector on first end and 9-pin DB-9 male RS-232 serial connector on second end. Adapter includes installation CD, 0.25 m USB extender cable and weighs 0.80 oz..USB 2.0.Data transfer rate: Up to 921600 baud, USB 2.0: 480 Mbps.Ports: 1 x 9-pin DB-9 male RS-232 serial, 1 x type-A male USB.Dimensions: 3.5" x 1.4" x 0.8".Form factor: External.Power consumption: 40mA at 5V.Serial port: Ports: 1, Protocol: RS232, Connector: DB9 connector - 9 pin male.Operating distance: EIA - RS232 standard, Tx FIFO size: 128, Rx FIFO size: 256.Max baud rate: 921600, Data bits: 7 or 8, Parity: odd, even, none, mark or space, Stop bits: 1 or 2.Tx/Rx modes: Point to point.PCB layers: 4.Platform supported: PC.Operating system: Microsoft Windows 7/Server 2008/Vista/Server 2003/XP/2000.Includes USB to serial adapter, installation CD, 0.25m USB extender cable.Certifications and standards: RoHS, WEEE.Weight: 0.81 oz..Warranty: Lifetime limited.Black/Blue.Brainboxes 1 Port USB to serial adapter supports 921,600 bytes data transfer rate to provide high performance and drivers for all popular operating systems.

This multiport PCI Express RS232 serial adapter card lets you add two RS232 (DB9) serial ports to your computer through a PCI Express (PCIe) slot, as if they were native serial ports. The dual port PCIe serial card enables you to interact with serial devices, such as card readers, printers, PIN pads, and modems, at speeds of up to 921.6Kbps..With broad OS support, including for Windows and Linux, this 2 port PCI E serial card is easy to integrate into mixed environments. The card comes pre-configured with a full-profile bracket, and includes optional low-profile brackets, so installation is easy regardless of the case form factor. This card is a direct replacement for PEX2S953LP..Industry standard 16950 UART compatible.Supports max baud rate of up-to 921.6Kbps.Provides 5/12V power output on Pin 9 when external power is connected.256-byte depth FIFO cache per transmitter and receiver.Asix AX99100 chipset

Brainboxes Ethernet to serial adapter transfers data at a rate of 1,000,000 baud rates and provides simple instant networked serial ports. Ethernet device can be accessed via TCP/IP sockets from any networked device..8 x RJ-45.2.2"(H) x 8 1/2"(W) x 4.8"(D).Wired.Connectivity media: Twisted pair 10/100base-TX fast Ethernet, Max baud rate: 1 Megabaud.Maximum power consumption: 1.93 W, Data bits: 5, 6, 7 or 8, Parity: Odd, even, none, mark or space, Stop bits: 1, 1.Form factor: Rail-mountable, wall mountable.Operating distance: EIA - RS232 standard.Connector: DB9 connector - 9 pin male, Management and protocols: RS232.Package includes: ES-279 Ethernet to serial device server, global power supply - PW-800, quick start guide, installation CD (manual, Microsoft signed drivers and utilities).Certifications & Standards: IEEE 802.3, IEEE 802.3u, CE, RoHS, WEEE.Weight: 0.87 kg.Black.Brainboxes Ethernet to serial adapter provides access to 8 RS232 serial ports and is featured with web interface for secure configuration of serial port over internet.

Iogear® USB 1.1 DB-9 Male to type A male RS-232 serial adapter is a efficient and cost effective solution for various communication and automation applications. Provides a RS-232 serial connector through a standard USB port for reliable transmission. High quality adapter accelerates the data transfer process by transferring at the rate of 230 Kbps. Offers candid USB interface to other serial peripherals like modem, PDA, POS or other serial devices and eliminates the need of the setup hassle. Supports energy saving suspend and remote wakeup operations..USB adapter that is compatible to connect with various devices.1' length for easy access.Male-to-male cable design eliminates the need for separate adapters.USB 1.1 for quick data-transmission.1 x 9 PindB-9 male RS-232 serial to connect conveniently with desktops or laptops.Plastic housing for durability.Compatible with Windows XP/Vista/7/8/8.1, Mac OS.Measures 0.6" x 1.3" x 16.6".Features 1 x 9-pin DB-9 male RS-232 serial connector at first end, 1 x 4-pin type A male USB connector at second end.Copper offers good conductivity.Converts older serial devices to USB connection.Power consumption is about 90 mA and supports the RS-232 serial interface.Offers transfer rate Up to 230 Kbps with USB 1.1, 2.0 compatibility.Operates temperature range of 41 - 104 deg F.Meets RoHS, WEEE certification and standards.Weighs 0.10 lbs.Comes with 3 years limited warranty.Iogear® USB adapter enhances productivity by instantly connecting your PC or Mac with serial devices. Transfers the data at the rate up to 230 Kbps.

The Opengear 6" crossover serial adapter features one RJ-45 female connection on first end and one 9-pin DB-9 female connection on second end. This serial adapter has copper conductors for high conductivity and plastic housing for durability. It supports network device and modem..Crossover serial adapter allows for a variety of connection.Cable length: 6".Connections: One RJ-45 female on first end and one 9-pin DB-9 female on second end.Connectivity: Wired.Material: Copper conductor, plastic housing.Device supported: Network device, modem

Includes one USB to RS-232 serial adapter, one DIN rail kit, one 6 ft USB A to B cable, one driver CD, and one instruction manual..USB.Data transfer rate: 921.60 Kbps serial port.Ports: 1 x 4-pin type-B female USB 2.0 USB external, 4 x 9-pin DB-9 male RS-232 serial external.Dimensions: 1"(H) x 2.6"(W) x 5.9(L).Form factor: Wall mountable.Serial protocol: RS-232, FIFO: 256 bytes.Chipset ID: FTDI FT2232H.Max baud rate: 921.6 Kbps, Parity: odd, even, mark, space, none, Stop bits: 1, 2, Data bits: 7, 8.Bus type: USB 2.0, Port style: External hub.Environmental condition: Operating temperature: 0 to 60 deg C, Humidity: 5 - 95% RH.Platform supported: PC, Mac.Operating system: Windows 8/7/Vista/XP/2000/CE/Server 2008 R2/2003/2000, Mac OS 10.x, Linux 2.4.x/2.6.x.Certifications and standards: RoHS, Green Compliant.Weight: 15.9 oz..Warranty: 2 years limited.Warranty: 2 years limited.Startech.com® Serial adapter hub has a data transfer rate of 921.60 Kbps and is PC and Mac platform supported.

Digi® USB-to-Serial adapter has 1 x 4-pin type B female USB 2.0 connector on first end and 1 x 9-pin DB-9 male RS-232 serial connector on second end. Adapter is compatible with PDA, printer, scanner or other peripheral devices..USB/serial interface.Data transfer rate: Up to 230 Kbps.Ports: 1 x RS-232 9-pin D-sub (DB-9).Dimensions: 0.8"(H) x 1.8"(W) x 3.2"(D).Connectivity technology: Wired.Connector: 1 x 4-pin type B female USB 2.0 USB first end, 1 x 9-pin DB-9 male RS-232 serial second end.Plug and play, hot swappable.USB 1.0, 1.1 and 2.0 compliant, no external power supply needed, UART: 128 byte buffer per direction.Compatibility: PDA, printer, barcode, scanner and other serial peripheral device.Plug the Edgeport/1 into the USB-port of a desktop PC, laptop, or thin client and gain one high speed RS-232 DB-9 serial-port.Operating temperature: 32 - 149 deg F, Operating humidity: 0 - 95%.Includes Edgeport/1, 1 meter USB cable.Compliant and standards: CE, UL 1950, CSA No. 950, FCC Part 15 Class B, EN55022 Class B, 55024, 60950.Weight: 1.6 oz..Warranty: 5 years limited.Digi® USB-to-Serial adapter is perfect for mission-critical applications like mobile computing and supports high-speed RS-232 DB-9 serial port.

The Ethernet to Serial Adapter supports data transfer rates of up to 10/100 Mbps..Interface Ethernet.Ports 1 x RJ-45 network port, 2 x serial port.Number of ports 2.Operating systems Windows® 7 (32- 64-bit), Vista (32- 64-bit), XP (32- 64-bit), Server 2003 & 2008 (32- 64-bit), Server 2008.Ethernet technology Fast Ethernet.Network standard 10 100Base-TX.Connector type 9 pin male (DB-9).Operating Temperature 0 to 55 deg C.Dimensions 1.10"(H) x 49"(W) x 42"(L).4 PCB layers.Power consumption 0.92W typical.Flow control RTS CTS, DSR DTR, Xon Xoff.Data bits 5,6,7 or 8, Stop bits 1, 2.Package contents ES-257 ethernet to serial device server, installation CD including manual, microsoft signed drivers & utilities, power supply.Weight 0.515 kg.Certification and standards Green compliant, FCC, WEEE, RoHs.Warranty Lifetime limited.Warranty Lifetime limited.Brainboxes ES-257 2 Port Ethernet to Serial Adapter card provides a simple, instant cable replacement providing network integration.

This adapter lets you connect up to four RS 232 serial devices to your Mac or PC laptop or desktop computer through a single USB port, as though the computer offered built-on DB9M serial connectors..Photo printer offers fast, reliable printing.Print technology: 4-color (CMYBK) drop-on demand MicroPiezo ®, Print resolution: 5760 x 1440 dpi.Connectivity: Hi-speed USB 20/Wireless 80211 b/g/n5, Wi-Fi direct.Dimensions: 33"H x 9"W x 69"D (storage), 79"H x 98"W x 151"D (printing).Paper type: Plain paper, photo paper glossy, premium photo paper glossy, ultra premium photo paper glossy, Paper sizes: 35" x 5", 4" x 6", 5" x 7".Meets UL60950, CSA 222 No 00950 EMI FCC part 15 subpart B class B, CSA C1088 class B certifications and standards.Display: 27" Color LCD display.Supported memory cards: SD/SDHC/SDXC, miniSD, miniSDHC, microSD, microSDHC, microSDXC.Mobile device compatibility: Epson Connect ™, Epson email print, Epson iPrint ™ mobile app, AirPrint ™, Google Cloud Print ™ android printing.Replacement ink: 320 standard-capacity (CMYBK), Printer designed for use with Epson cartridges only, Ink yield information: CMYBK - 100 4" x 6" photos.Ink type: 4-color dye, Ink palette: Dye black, cyan, magenta and yellow, Fade resistance/print longevity: Up to 200 year album storage.Rated voltage: 100 - 240 VAC, Rated frequency: 50/60 Hz, Rated current: 04 A (max 05 A).Operating temperature: 50 - 95 deg F.Contains setup and instruction manual, power cord, AC power adapter, one ink cartridge (CMYBK) and five photo paper glossy sheets.Comes with 1 year limited warranty.Safety Data Sheet.Certification and standards: Green compliant, CE, ROHS, FCC, USB 1.1 specifications.Warranty: Lifetime limited.Startech.Com® ICUSB2324 DB9 4 Port Serial Adapter Hub is compactly designed to preserve valuable workspace, and is bus-powered to eliminate the need for an external power adapter.

Startech.com® 8 Port adapter features metal construction that adds durability in harsh environments. Adapter has sturdy wall-mounting brackets and top-hat DIN rail clips..Connect up to 8 USB devices.Windows 8 (32/63bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, CE, Windows server 2008 R2, 2003(32/64), 2000, Mac OS 10.x, Linux 2.4.x/ 2.6.x.Integrated wallmount brackets and included DIN Rail clips for versatile mounting options.Black.Form factor: Wall mountable.Interfaces: 1 x 4-pin female USB 2.0 (external), 8 x 9-pin DB-9 male RS-232 serial (external).Dimensions: 1.7inch(H) x 3.9inch(D) x 7.1inch(L).Includes 1 x USB to RS-232 serial adapter, 1 x DIN rail kit, 1 x 6 ft USB A to B cable, 1 x driver CD, 1 x instruction manual.Rugged all-metal enclosure for added durability in harsh environments.Easy plug and play installation, with our USB Powered adapter - no power outlet required.Max baud rate: 921.6 Kbps, serial protocol - RS-232, data bits - 7, 8, FIFO - 4096 byte transmit and receive.LED indicators: 8 each, Tx/Rx activity indicators, enclosure type - steel.Parity odd, even, mark, space, none and stop bits - 1, 2.Applications: Perfect for IT Administrators looking to add legacy functionality to newer notebooks, PCs and servers that lack an integrated RS232 port, connect, monitor and control industrial/automotive sensors and equipment.Connect bar code scanners, receipt printers and other point of sale devices, Connect a satellite receiver, serial modem, or PDA with serial sync, connect and program LED and Digital signage boards.Operating temperature: 32 - 131 deg F, storage temperature: 0 - 85.Certifications and standards: RoHS, green compliant, CE, FCC.Weight: 19.2 oz..Warranty: 2 years limited.Startech.com® 8 Port adapter converts a single USB port into eight RS232 serial ports and also enables in connecting to monitor and control serial devices.

The U209-18N-NULL USB to Null Modem Serial FTDI Adapter Cable (M/F) allows you to connect a DTE serial device to a computer, laptop or tablet with a USB-A port. It supports data transfer speeds up to 256 Kbps-twice as fast as a built-in serial port. It solves DCE/DTE conflicts without additional cross-wired serial cables or adapters. No external power source is required. The compact 18-inch cable tucks away in your backpack or laptop bag for use anywhere. The hot-swappable U209-18N-NULL with built-in FTDI chipset offers COM retention. It automatically reassigns the same COM port values to each port in case the cable is disconnected or the system is rebooted.Premium foil and braid shielding delivers reliable, error-free signal quality and protection from EMI/RFI line noise. Molded nickel-plated connectors with gold-plated contacts ensure excellent conductivity. Integral strain relief ensures the cable and connectors last a long time. Works with Windows, Mac and Linux computers. Features Converts USB Port into RS-232 Null Modem Serial Port Solves DCE/DTE conflicts without additional cross-wired serial cables or adapters Supports data transfer speeds up to 256 Kbps-twice as fast as a built-in serial port No external power source required Portable 18 in. design fits perfectly into laptop bag COM retention for automatic reassigning of COM values to ports in case of disconnection or reboot Integrated FTDI FT232RL chipset First-Rate Construction for Superior Signal Transfer Premium foil and braid shielding for EMI/RFI noise protection Molded nickel-plated connectors with gold-plated contacts for optimal signal quality Integral strain relief for long life Flexible PVC jacket easy to install in tight spaces Broad Compatibility Compatible with Windows, Mac and Linux operating systems.Supports data transfer speeds up to 256 Kbps.Premium foil and braid shielding reduces EMI/RFI line noise.Compatible with Windows, Mac and Linux.No external power source required.Integrated FTDI FT232RL chipset

The Brainboxes US-101 Serial Adapter is perfect for everyday use..Device Type: Serial adapter.Packaged Quantity: 50 (specifications are for single item).Form Factor: External.Interface (Bus) Type: USB 2.0.Ports: RS-232.Dimensions (WxDxH): 1.4 in x 3.5 in x 0.8 in.Weight: 0.88 oz.Data Link Protocol: RS-232.Data Transfer Rate: 921.6 Kbps.Compliant Standards: USB 2.0.System Requirements: Microsoft Windows Server 2003, Microsoft Windows Server 2008, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits).Microsoft Certification: Compatible with Windows 7.Manufacturer Warranty: Limited lifetime warranty

This PCI Express RS232 serial adapter card lets you add four RS232 (DB9) serial ports to your computer through a PCI Express (PCIe) slot, as if they were native serial ports. The 4 port PCIe serial card enables you to interact with serial devices, such as card readers, printers, PIN pads, and modems, at speeds of up to 921.6Kbps..4 PORT SERIAL CARD: Serial controller card w/ 16950 UART based on ASIX AX99100, allows 4x DB9 ports w/bi-directional RS232 speeds up to 921.6Kbps per port, available 256 byte FIFO buffer; Upgraded version of our popular Serial card PEX4S952.OPTIONAL CONFIGURABLE POWER: PCIe multiport serial card provides 12v, 5v, or none through pin 9 w/up to 2A total; Each of the 4 ports are individually configurable; DB44 to 4x DB9 breakout cable incl.STANDARD PROFILE & LOW PROFILE BRACKET: PCI Express RS232 serial adapter card has standard bracket pre-installed & 1x low profile bracket incl for versatile install; Supports Windows XP and up & Linux.VERSATILE APPLICATIONS: For standard profile desktop/servers with uses in point of sale terminals, PLCs, control/automation in factories, scientific sensors, medical equipment, scanners, oscilloscope.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; PCI-e RS232 Serial expansion card is backed for life by StarTech.com, incl. free 24/5 North America based multi-lingual tech support

Device Type: Serial adapter.Form Factor: Plug-in card - low profile.Interface (Bus) Type: PCI Express x1.PCI Specification Revision: PCIe 1.0a.Ports: RS-232 x 2.Dimensions (WxDxH): 4.7 in x 4.1 in x 0.8 in.Weight: 2.15 oz.Data Link Protoco

Add RS-232 DCE serial communication support to your desktop or laptop with this 3.3ft (1m) USB to RS-232 Null Modem Serial Adapter, featuring a DB9 female connector and FTDI chipset for reliable performance. Designed to resolve DCE/DTE conflicts without extra cross-wired cables or adapters, this rugged adapter offers real-time LED indicators for transmit, receive, and USB status, ensuring easy diagnostics. Compatible with Windows (7+), macOS (10.15+), ChromeOS, and Linux, it supports automatic driver installation and COM port retention for seamless reconnection. Built for durability with molded TPE housing, Level-4 ESD protection (15kV air / 8kV contact), copper shielding to minimize EMI/RFI interference, and gold-plated connectors for superior signal integrity, this adapter is ideal for connecting industrial sensors, POS devices, barcode scanners, and digital signage boards. With a max baud rate of 921.6Kbps, extended operating temperature range (-40°C to 80°C), and interchangeable DB9 screws/nuts for secure mounting, this USB to serial adapter delivers reliable, high-speed connectivity for all your RS-232 applications..Add RS-232 Serial Support: Easily connect legacy serial devices to your laptop or desktop via USB-A; resolves DCE/DTE conflicts without extra cross-wired cables or adapters..Null Modem Design: Includes a DB9 female connector with interchangeable screws and nuts for secure attachment to industrial equipment, POS devices, and signage boards..Real-Time LED Indicators: Monitor Transmit (TX), Receive (RX), and USB status for quick diagnostics and troubleshooting..Universal Compatibility: Works with Windows (7+), macOS (10.15+), ChromeOS, and Linux; features auto-driver installation and COM port retention for seamless reconnection..Rugged & Reliable Build: Molded TPE housing, Level-4 ESD protection (15kV air / 8kV contact), copper shielding to reduce EMI/RFI interference, and gold-plated connectors for superior signal integrity..High-Performance Specs: 3.3ft (1m) cable, FTDI FT232R chipset, max baud rate 921.6Kbps, extended operating temperature (-40°C to 80°C), and support for multiple parity/data bit configurations..Box contains: USB to serial adapter, two DB9 nuts, quick-start guide.2-year manufacturer limited warranty

Add serial communication support to a Small Form Factor (SFF) or full-size system, using this two-port serial card. RS-232 (DB9) support enables control and communication with serial peripheral devices..Dual port PCIe to RS232 (DB9) Serial card with 16C1050 UART.Supports small form factor (SFF) or full-size systems; contains two DB9 (nine-pin, D-sub) male ports.Perfect for legacy system upgrades in a wide range of applications for logistics, manufacturing, and freight sectors, and the IT industry, such as POS equipment, security systems, A/V installations, and more.Features support for high-performance 16C1050 UART on both DB9 male ports.Monitor activity with the built-in LED status lights on the PCI express DB9 card.2-year manufacturer limited warranty

8-Port PCI Express RS232 Serial Adapter Card - PCIe RS232 Serial Card - 16C1050 UART - Low Profile Serial DB9 Controller/Expansion Card - 15kV ESD Protection - Windows/Linux (PEX8S1050LP).8 PORT SERIAL CARD: Serial controller card w/ 16C1050 UART based on the Systembase SB16C1058PCI, w/15kV ESD, 8x DB9 ports, bi-directional RS232 speeds up to 921.6Kbps per port & 256 byte FIFO buffer | An upgrade to our popular card PEX8S950LP.COMPATIBILITY: 2 low profile brackets for PCI-e 1x card; Fully compliant w/ PCI Express Base Spec, Revision 1.0a/1.1; Supports Windows (incl. XP and up) and Linux; For low profile desktop/servers.OPTIONAL CONFIGURABLE POWER: Multiport serial card provides 12v/5v, or none on pin 9 w/up to 3A total shared; 2 (1xDB44 to 4xDB9) breakout cables incl; Hex nuts incl for opt screw or nut DB9 interface.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; PCIe RS232 Serial expansion card is backed for life by StarTech.com, incl. free 24/5 North America based multi-lingual tech support.VERSATILE APPLICATIONS: PCI Express RS232 serial adapter card for within point of sale terminals, PLCs, control/automation in factories, scientific sensors, medical equipment, scanners, oscilloscope.Low Profile Serial Card | Full Profile Brackets Incl | 921.4Kbps | Windows® and Linux®

Convert a single USB port into eight serial ports, and connect multiple hubs together for a scalable solution. This 8-port USB-to-serial adapter hub provides an easy and cost-efficient way to add RS232 serial capability to your industrial setting. It features a sturdy, rack-mountable chassis, and supports daisy chaining, so you can connect multiple hubs together to increase your serial device port count.A scalable solution for changing needsThis rack-mountable USB serial hub (FTDI) lets you add eight serial ports (RS232), with full control from your desktop or laptop computer system using a single USB port..Gain eight RS232 serial port interfaces through a single USB port.Connect multiple hubs together through daisy chain functionality.921.6Kbps baud rate per port

StarTech Slimline Serial DB9 gender changer.Gender changer transforms a nine-pin female port to a nine-pin male port.DB-9 nine-pin and D-sub male connector on both ends.Simple to use and install.Meets RoHS, FCC and CE Compliance.Lifetime warranty.The StarTech Slimline Serial DB9 gender changer is a reliable way to convert a nine-pin female port to a nine-pin male port.

The Brainboxes ES-413 Ethernet to serial device server provides local control for remote serial device. This device server is user friendly interface, simple to use and powerful in operation..Device server.Dimensions: 1.1"H x 3.9"W x 4"D.Comes in black color.Baud rate: From 110 - 1000000 baud, Data bits: 5, 6, 7 or 8.Data rate: 10/100 mega bits/second.Form factor: Rail-mountable.Interfaces/ports: 2 x serial port, DB9 connector - 9 pin male.Power supply: Power over Ethernet, 5 - 30 VDC input, reverse polarity protected.Ethernet technology: 100Base-TX fast Ethernet.Network protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, HTTP, RFC2217.OS compatibility: Communicate with Device over TCP from any OS / Microsoft Windows 8 32 bit 64 bit Editions / Windows Server 2012.User friendly interface, simple to use, powerful in operation.Serial port tunnelling allows serial cable replacement over any distance, no software required.Optional DIN rail mounting kit and stand alone power supply.Certifications and standards: AEO C-TPAT Microsoft Certified Gold Partner WEEE RoHS EMC: CE TAA.Weight: 4.62 oz..Comes with lifetime warranty.Ethernet to serial device server features user friendly interface, simple to use, powerful in operation and data rate from 110 - 1000000 baud.

This card lets you to add two RS 232 and two RS422/485 serial ports to your PC through a PCI-Express expansion slot..Interface: RS-232, 422, 485 serial.Data transfer rate: Up to 460 Kbps.Ports: 4 x 9-pin DB-9 male RS-232/422/485 serial.Form factor: Plug-in card.Platform supported: PC.Number of ports: 4.Compatibility: Windows 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows Server 2008 R2, 2003(32/64), Linux Kernel 2.6.x.Card type: Standard profile.Chipset ID: SystemBase - SB16C1052PCI.Connector type: 1 x PCIe male.Operating Temperature: 0 to 100 deg C.Dimensions: 2.7"(H) x 0.6"(W) x 5.3"(L).Standard and low-profile bracket included, supports 2-wire/4-wire RS485 modes, 256-byte deep FIFO per transmitter and receiver.Applications: Monitor and control industrial machines on an assembly line or in a production environment, Bank teller workstations in either full profile or low profile, self-service automated machines and kiosks to control serial devices.Package contents: 1 x PCIe serial combo card, 1 x breakout cable, 1 x low profile bracket, 1 x driver CD, 1 instruction manual.Weight: 2.4 oz..Certification and standards: Green compliant, CE, ROHS, FCC, PCI power management 1.1, PCI-express specification 1.0a.Warranty: Lifetime limited.Startech.Com® PEX4S232485 PCI Standard Profile Serial Combo Card is a single card solution that is compatible with nearly any serial communication protocol, supporting RS-232, RS-422, RS-485 2-wire or RS-485 4-wire operating modes.

The IC485SN is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. The IC485SN is a bi-directional interface converters for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations..Supports baud rates up to 115.2kbps..Cable distance of up to 1200m (4000 ft.)..Non powered operation..Compact size.

Startech® Slimline GC9SF DB9 Serial Gender Changer.Adapter type: Serial.Warranty: Lifetime limited.Gold-plated contacts for lag-free and efficient data transmission.Supports a display resolution of 1080p for outstanding video clarity.Compact and lightweight design for hassle-free portability.RoHS compliant.StarTech .com® Slimline serial gender changer is a reliable way to convert a 9 pin male port to a 9 pin female port and is easy to use or install.

Enhance network connectivity with the Digi TS DB-9M to RJ-45 Modem Adapter. Designed for efficiency and usability, this adapter offers fast, reliable performance and easy replacement for added convenience..RJ-45/Serial adapter is easy to be replaced.Ensures superior functionality: Enhance network connectivity with the Digi TS DB-9M to RJ-45 Modem Adapter. Designed for efficiency ....Plug-and-play setup eliminates the need for additional drivers or software..Compatible with a wide range of devices for versatile applications.

StarTech DB9 RS232 Serial Null Modem Adapter, F/F (NM9FF).Easy to use and install.Backed by StarTech .com lifetime warranty.DB-9 Female to DB-9 Female

StarTech DB9 RS232 Serial Null Modem Adapter, F/F (NM9FF).Easy to use and install.Backed by StarTech .com lifetime warranty.DB-9 Female to DB-9 Female

The StarTech.com ® PLATE9M16LP 1-port 16" DB9 serial port bracket to 10-pin header data transfer cable allows DB9 serial connectivity on a compact POS computer. It adds a DB9 serial port to the rear panel of a small form factor/low profile computer, connecting to an IDC10 header connector on the motherboard. This cable features high-quality components for longer life. It has one 10-pin IDC female connector on one end and 9-pin DB-9 male connector on other end to ensure reliable connection..Connectors: one IDC (10-pin, motherboard header) female on first end and one DB-9 (9 pin, D-Sub) male on second end.RoHS Compliant.Weight: 0.8 oz..Comes with lifetime warranty.Certifications and standards: RoHS, green compliant.Length: 1.33'.Dimensions: 3.1"(H) x 0.7"(W) x 6.2"(L).Applications: Enabling DB9 serial connectivity on a compact POS computer.low profile serial plate adds a DB9 serial port to the rear panel of a small form factor/low profile computer.Constructed of high quality components.28 AWG wire gauge, 16" cable length, copper conductor.Includes: 1 x 16" / 0.4 m low profile port serial plate.StarTech.com DB9 Serial Port Bracket - Low-Profile Serial Port

Engineered for reliability and performance, the ASCSDB9F adapter bridges legacy serial devices with modern console servers using a compact, rugged design. Whether you're managing data centers, networking gear, or industrial systems, this adapter ensures seamless communication between RJ-45 Female and DB9 Female interfaces..Engineered for serial data communication and widely deployed across IT infrastructure, data centers, and industrial environments..Features an RJ-45 female connector and is compatible with the Raritan ConsoleSwitch SCS232 for reliable serial communication..Includes a DB9 female connector that delivers RS-232 serial output to compatible legacy devices..Equipped with female connectors on both the RJ-45 and DB9 ends, allowing seamless connectivity..Designed exclusively for data transmission.

Connect devices with a 9-pin RS-232 serial port, such as PDUs, network switches and console servers, to the USB-A port on your computer or laptop. This USB-to-Serial cable (M/M) connects a 9-pin RS-232 (DB9) serial device to a USB-A port on your desktop computer or laptop. It connects modems, PDUs, network switches, console servers and other serial devices at data transfer speeds up to 230 Kbps, which is twice as fast as a built-in serial port. The compact five-foot (1.5-meter) cable fits easily inside a backpack or laptop bag for use almost anywhere. The U209-000-R blocks disruptive EMI (electromagnetic interference) and RFI (radio frequency interference) line noise that can disturb your network equipment and inflict hardware damage or data loss. Premium double-shielding eliminates crosstalk and helps your connected components perform better and last longer. This RS-232 cable requires no external power source and supports remote wake-up and power management. It works with most major operating systems, including Windows 2000 through 11, macOS 10.6 through 12.4 and Linux Redhat 7.3, 8.0 and 9.0.Supports data transfer rates up to 250 Kbps—2x the speed of a built-in serial port.Premium double-shielded cable eliminates crosstalk and reduces EMI/RFI line noise.Portable design fits comfortably inside a backpack or laptop bag.Compatible with Windows, macOS and Linux operating systems.Plug-and-play with no external power required for easy, immediate installation.3-year limited warranty.TripLIte 5 ft. (1.5 m) USB-A to RS-232 (DB9) Serial Adapter Cable (M/M)

StarTech® Motherboard Header Slot plate in gray color features one DB9 male connector and one IDC10 connector. Plate can be connected to preferred slot on back of PC and plug the adapter into the motherboard for easy installation..1.33 ft.1 x DB-9 Male Serial.1 x IDC.Gray.1 x DB9 serial expansion port and bracket.Lifetime limited warranty.StarTech® 15.98" Motherboard Header Slot plate in gray color is made up of high-quality copper to ensure durability and reliability.

Brainboxes ES-246 Ethernet to serial adapter has high efficiency data transfer rate of 1000000 baud that is apt to couple with 1 Mbps line drivers for significant operation. The adapter with COM ports is perfect for accessing through TCP and IP sockets from any networked device such as an Android tablet, PC or phone. Requires input power of 5 - 30 VDC. Provides simple and instant-networked serial ports for aiding in effortless usage. Compatible with Microsoft Windows 7 32 bit & 64 bit, Windows Server 2008, Windows Vista, Windows XP and Microsoft Windows 2000 operating systems..Ethernet to serial device server for use in multiple software purposes.Measures 1.1" H x 4" W x 3.9" D.RS232 port for external interface.DB9 9-pin male connector for better connectivity.Offers a 256 FIFO size for transmitting and 32 FIFO size for receiving.EIA - RS232 standard transmits data over a long distance.Fast Ethernet technology for LAN or MAN connection.Transfers 1000000 bits for increased serial data speed.Odd or even parity detects whether the value of any bits has been altered.Tx/Rx modes for point-point communication.4 PCB layers eliminates operator wiring errors.Serial port tunneling allows serial cable replacement over any distance.Requires 5 - 30 VDC power input to operate.Works with Microsoft Windows 8 32, 64 bit Editions/7 32, 64 bit Editions/2000, Windows Server 2008 32 operating systems.Operates at a temperature of 0 to 55 deg C.Certifies to WEEE, RoHS standards.Weighs 0.114 kg.Comes with lifetime warranty enhances performance of your system.Brainboxes Ethernet to serial device server provides access to RS232 serial port and offers user-friendly performance. Perfect for use in multiple software applications.

Transform your connectivity experience with the Rocstor Premium DB9 to RJ45 Modular Adapter. Designed to convert your DB9 male connector into an RJ45 female connector, this versatile adapter supports modular RS232, RS422, and RS485 connections, making it an essential tool for various applications. Key Features: Effortless Conversion: Easily convert DB9 male connections to RJ45 female connections. Versatile Compatibility: Supports RS232, RS422, and RS485 connections for a wide range of devices. Custom Pin-Out Configurations: Tailor your serial pin-out setups to meet specific needs. Durable Design: Equipped with gold-plated connectors for reliable performance and longevity. Lifetime Warranty: Backed by Rocstor's limited lifetime warranty for peace of mind. Whether you're setting up a new network or upgrading your existing connections, the Rocstor Premium DB9 to RJ45 Modular Adapter ensures a smooth and efficient transition. Its robust construction and flexible configuration options make it the perfect choice for professionals and enthusiasts alike..Designed for data transfer, making it ideal for modular RS232, RS422, and RS485 connections..Functions as an adapter, converting DB9 male connections to RJ45 female connections for versatile use in various applications..Features a DB9 female connector, allowing for easy connection to DB9 male ports..Equipped with an RJ45 female connector, it facilitates seamless integration with RJ45 male connectors..Compact design and does not include a cable, ensuring a clutter-free setup..Female connectors on both ends, providing flexibility in connecting male connectors..Specifically designed for data transfer, it supports custom serial pin-out configurations for tailored setups..Unlock Seamless Connectivity with the Rocstor Premium DB9 to RJ45 Modular Adapter

Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server is compatible with Windows 2000/XP/Vista/7/8 OS. Server allows accessing the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone..Media type supported: Twisted-pair.Max baud rate: 1,000,000 (1 MegaBaud), data bits: 5,6,7 or 8, parity: Odd, even, none, mark or space, stop bits: 1 or 2, flow control: RTS/CTS, XON/XOFF, Tx/Rx modes: Point to point, data transfer rate: 230.4 Kbps.OS required: Microsoft Windows 7 32 bit & 64 bit editions, Windows Server 2008 32 bit & 64 bit editions, Windows Vista 32 bit & 64 bit editions, Windows Server 2003 32 bit & 64 bit editions, Windows XP 32 bit & 64 bit Editions, Microsoft Windows 2000.Protocol: RS422/485, connector: DB9 connector - 9 pin male, Tx FIFO size: 4096, Rx FIFO size: 2048, operating distance: RS422/485 standard (4000 ft : 1200 meters).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX.Network/Transport protocol: TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP, remote management protocol: Telnet, HTTP, status indicators: Port status, link activity, link OK.Interfaces: 1 x 100Base-TX - RJ-45.Form factor: Rail-mountable.Storage temperature: 0 to +55 deg C / +32 to +158 deg F.Power input: 5 - 30 VDC input, reverse polarity protected, power supply: 1 description Global power supply - PW-800, power consumption: 0.77W (Typical).Web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser.Includes: 1 port RS422/485 Ethernet to serial adapter ES-320, installation CD including manual, Microsoft signed drivers & utilities, global power supply.Half-duplex configuration with autogating provides trouble-free data transmission due to automatic control of data direction.Certifications and standards: EMC: CE TAA, AEO C-TPAT, IEEE standards: 802.3, 802.3u, green compliance certificate/authority: RoHS, WEEE.Dimensions: 1.1"(H) x 4"(W) x 3.9"(D).Warranty: Lifetime limited.Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server offers data transfer rates up to 1000000 baud and has simple instant-networked serial ports.

StarTech PLATE9MLP 9-Pin Serial Male to 10-Pin Motherboard Header LP Slot Plate.Easy to use and install.Conveniently add an external DB9 serial port.9pin Serial Male to 10pin IDC Female.Conveniently add an external DB9 serial port.9pin Serial Male to 10pin IDC Female

Replace or add a serial port to your compatible HP computer. Compatible with the following: HP EliteDesk 800 G6 TWR, HP EliteDesk 800 G6 SFF, HP EliteDesk 800 G6 DM, HP EliteDesk 805 G6 SFF, HP EliteDesk 805 G6 DM , HP ProDesk 600 G6 MT, HP ProDesk 600 G6 SFF, HP ProDesk 600 G6 DM, HP ProDesk 400/480 G7 MT, HP ProDesk 400 G6 DM, HP ProDesk 400 G7 SFF, HP ProDesk 405 G6 MT, HP ProDesk 405 G6 SFF, HP ProDesk 405 G6 DM..9-Pin Serial Male Connector.Compatible with a variety of HP PCs.Weight: 0.46 oz.Dimensions: 4.18 W x 3.9 D x 1.65 H (cm)

Zebra ZD400 Series field upgradeable serial module. The serial module option does not come preinstalled with any printer. Compatible with the following Zebra Printers: ZD421D, ZD421T, ZD421C, ZD611D, ZD611D-HC, ZD411T, ZD411D, ZD411D-HC..Serial module kit enabling RS-232 connectivity for desktop printers, ensuring efficient data transmission in business settings..Compatible with Zebra ZD421 and ZD411 desktop printers..This unit simply slots into the back of your printer and is easily installed in around 30 seconds.

Use our Modem Splitter to connect three terminals to one modem and save money - you won't need extra modems and extra lines! No special cables are needed. It uses ordinary straight-pinned cables for a hookup, and includes a 6-ft. DB25 male/DB25 female extension cable and a serial DB9 female/DB25 male AT adapter. The Modem Splitter is transparent to speed and protocol and works equally well in sync and async environments. The TL073A-R4 includes (1) modem splitter, (1) 6-ft. DB25 male/DB25 female extension cable, and (1) serial DB9 female/DB25 male AT adapter. A 6-Port Modem Splitter is also available. See "Similar Products.".Data coming into the MASTER port on pin 3 of the RS232 DB25 Passive Splitter goes to all three Slave ports since they are all tied common..The total combined length of all cables connected to the unit should be less than 50 feet (15.2 m)..Signals present on the PORT connectors at pins 2, 4, and 20 are passively stored and sent to the corresponding pins on the MASTER connector..Signals present on the MASTER connector at pins 1, 3, 5, 6, 7, 8, 15, and 17 are sent to the corresponding pins on each of the PORT connectors.

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

This genuine Zebra accessory adds both Ethernet (10/100Base-TX) and RS-232 Serial ports, enabling reliable wired networking and serial communication for high-performance label printing. Whether you need to integrate your printer into a secure wired network or connect to legacy systems, this module ensures seamless and stable data transfer. The compact, lightweight design fits perfectly into the printer without adding bulk, maintaining a clean and professional setup. Installation is quick and hassle-free, allowing you to upgrade your printer without technical complexity or downtime. Specifically engineered for Zebra ZD620T printers, this module works across all major operating systems supported by Zebra printers, including Windows, Linux, and Mac OS. Built to Zebra’s high standards for durability and performance, this upgrade module is a cost-effective way to extend the functionality of your existing printer rather than investing in a new device. Backed by Zebra’s warranty and support, it offers peace of mind and long-term reliability. Enhance your printer’s connectivity today and keep your operations running smoothly with the Zebra Ethernet/Serial Upgrade Module..This is a genuine Zebra upgrade module designed to add Ethernet and Serial connectivity to Zebra ZD620T thermal transfer printers.Lightweight and compact design that integrates seamlessly into the printer.Specifically designed for Zebra ZD620T performance desktop printers.Compatible with all major operating systems supported by Zebra printers, including Windows, Linux, and Mac OS environments.Adds both Ethernet (10/100Base-TX) and RS-232 Serial ports for versatile wired networking options.Upgrade your Zebra ZD620T thermal transfer printer with the Zebra Ethernet/Serial Module, designed to provide enhanced connectivity and flexibility for your business operations.

The Brainboxes ES-420 1-port RS422/485 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 - 1000000 baud. It features full duplex, half-duplex autogating Tx/Rx modes and has DB9 9 pin male connector. This device server offers maximum operating distance of 4000' and is compatible with Communicate with Microsoft Windows 10/8/7/Vista/XP 2000 operating systems..Drive server provides access to one RS422/485 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.74 W, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE TAA, IP-30, Green, RoHS and WEEE certifications & standards.Interface: One RS422/485, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: 4000', Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty

Lantronix® Xdirect SGL port device comes with an c Ethernet port and serial cable, multiple power options. Port device provides a portable, extremely flexible and highly affordable network connectivity solution..Interfaces/ports: 10Base-T /100Base-T (auto-sensing), DB9F (DCE pinned).Dimensions: 9 1/2"(H) x 1.3"(W) x 1.1"(D).Modes: RS232, RS422* or RS485* (2 and 4 wire support).Baud rate: 300bps to 921.6 Kbps.Characters: 7 or 8 data bits, stop bits: 1 or 2.Parity: Odd, even, more.Control signals: CTS/RTS (hardware).Flow control: CTS/RTS, XON/XOFF.Connector: RJ45.Protocols: UDP, TCP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, HTTP, Telnet com port control.Power/status, link, activity, serial RX activity and TX activity.CPU: Based on DSTni-EX enhanced 16-bit x86 architecture.Memory: 256 KB SRAM, 1 MB flash.Input voltage: 5 V at mini-USB-B jack, input voltage: 5 - 15 VDC at DB9F pin 9.128/192/256-bit AES encryption.Environmental conditions: -40 - 85 deg C non-PoE models, -40 - 70 deg PoE model, humidity: 0% - 90% non-condensing.Weight: 0.15 lbs..Warranty: 5 years limited.Lantronix® Xdirect SGL port device is a compact serial-to- Ethernet device server and offers quick as well as easy Ethernet connectivity to virtually any device or machine with a serial interface.

Enable legacy device connectivity from your HP business desktop with the HP internal serial port. Compatible with HP EliteDesk 800 G4 TWR, EliteDesk 800 G4 SFF, EliteDesk 705 G4 MT, EliteDesk 705 G4 SFF, ProDesk 600 G4 MT, ProDesk 600 G4 SFF..Internal serial port will enable legacy I/O support.Dimensions: 3.38"H x 4.68"W x 0.91"D.Comes in black.Add an extra internal serial port to your tower.Compatible with HP EliteDesk 800 G4 TWR, EliteDesk 800 G4 SFF, EliteDesk 705 G4 MT, EliteDesk 705 G4 SFF, ProDesk 600 G4 MT, ProDesk 600 G4 SFF.1-year manufacturer limited warranty

Quickly and easily add a serial port to your desktop to connect to your serial and parallel peripherals with the HP USB Serial Port Adapter, which plugs into any USB port on your PC..Transfer data in a snap.Serial and USB ports for instant connectivity.1 x 9-pin DB-9 Female RS-232 Serial establishes rapid connection with a PC