Spool 3D Printer Parts and Accessories

Makerbot® MP06572 Large Spool PLA Filament Cartridge For Replicator Desktop 3D Printers.Filament is a bioplastic derived from corn, does not contain any heavy metals, phthalates or BPA.Dimensions: 9.84"(Dia.) spool, 1.57"(W) spool, 2"(hole) spool hub, 0.068"(Dia.) filament.Compatible with: MakerBot Replicator 2, Replicator 5th generation, Replicator Z18.Temperature: 60 - 65 deg C(glass transition), 150 - 160 deg C(melting), 230 deg C(nozzle).Print color: Cool gray, true black, true blue, true green, true orange, true purple, true red, true white, true yellow, warm gray.Printing technology: Fused deposition modeling.Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot Desktop software offers.Weight: 2 lbs..Makerbot® 1.75 mm PLA filament is used for replicator desktop 3D printers and includes one large 2 lb spool, sold as 10 per pack.

SR-30 is a proprietary soluble support material developed by Stratasys to work seamlessly with ABS and other higher temp materials. SR-30 requires a specialized Ecoworks solution along with heat and agitation for the best dissolution results..Compatible with METHOD X and METHOD X Carbon Fiber 3D printers, as well as support 2XA extruder.SR-30 is a proprietary soluble support material developed by Stratasys to work seamlessly with ABS and other higher-temperature materials.Comes in white color.Requires a specialized Ecoworks solution along with heat and agitation for best dissolution results

The Makerbot Sketch PLA mixed pack is the perfect filament for your Sketch Classroom set or Sketch 3D printer. Makerbot PLA is tuned to work seamlessly with it. This pack includes five spools of Makerbot PLA material (2.2 lbs. each), blue, yellow, red, green, and gray colors..Compatible with Makerbot Sketch 3D printer.Filament spools are great for early concept models.PLA is a corn-based plastic.Colors included: blue, yellow, red, green, and gray.Five spools per pack

UltiMaker Breakaway is a specially engineered support material designed for multi‑extrusion 3D printing and optimized for fast, clean removal. Unlike dissolvable supports, Breakaway requires no soaking, chemicals, or additional post‑processing—simply detach it by hand to reveal a smooth surface finish on your printed model. It provides strong adhesion to a wide range of build materials including ABS, PLA, Nylon, CPE, and CPE+, making it highly versatile for complex geometries and functional prototypes. Breakaway is less moisture‑sensitive and offers a longer shelf life compared to water‑soluble materials like PVA, ensuring reliable performance over time. This 2.85mm white filament also includes NFC recognition for UltiMaker printers, enabling automated settings and optimized print profiles for consistent, high‑quality results..Designed for 3D printers to ensure broad compatibility..Built as support filament on a spool for easy printing use..Measures 2.85mm for accurate multi‑extrusion performance..Made from Breakaway material for fast, clean support removal..White color for clear visibility during printing.

Makerbot produces high-quality, long-lasting, ABS-R filament material compatible with METHOD X and METHOD X Carbon Fiber 3D printers, as well as Models 1XA and experimental LABS GEN 2 extruders. ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts..Compatible with METHOD X and METHOD X Carbon Fiber 3D printers, as well as Models 1XA and experimental LABS GEN 2 extruders.ABS-R filament spool for fused deposition modeling.Filament diameter: 1.75mm.ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts.Comes in black color.Smart Spool provides valuable information including material type, color, and amount remaining via an RFID chip directly to Makerbot print.Store in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from air.Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.Compatible with RapidRinse fast-dissolving support material

UltiMaker PETG is an accessible, reliable, and cost‑effective material designed for a wide range of technical and general‑purpose 3D printing applications. This 2.85mm PETG filament offers an excellent balance of toughness, chemical resistance, and temperature durability, making it ideal for industrial parts, tools, jigs, and functional prototypes. With strong layer adhesion and dependable extrusion behavior, it delivers consistent printing results across various environments. UltiMaker’s NFC detection enables automatic material recognition and optimized profiles for UltiMaker printers, while support compatibility with PVA and Breakaway materials allows users to create intricate geometries with ease. The vibrant orange color enhances visual clarity for coding, safety marking, or aesthetic purposes. Supplied on a durable 750g spool, UltiMaker PETG provides print quality and performance suitable for professional teams and advanced makers alike..Designed for 3D printers to ensure broad compatibility..Built as filament on a spool for smooth and reliable printing use..Measures 2.85mm for consistent and accurate extrusion flow..Made from PETG for tough and chemical‑resistant parts..Bright orange color for high‑visibility prints.

The Makerbot smart extruder+ detects the absence of filament, automatically pauses your print and sends notifications to desktop or mobile. It is compatible with replicator mini compact 3D printer and replicator desktop 3D printers. This extruder delivers dependable, consistent performance with superior results using (No Suggestions) PLA filament. The improved components and an enhanced sensor system ensure simple, reliable 3D printing from start to finish. It features enhanced homing, better connectivity as well as drastically reduced clogging and jams. It is easy to replace or swap so you can minimize downtime and continue printing..Smart extruder+ sends notifications to desktop and mobile.Compatible with Replicator mini compact 3D printer (5th generation model) and replicator desktop 3D printer (5th generation model).Tested for 160,000+ hours to ensure reliability, superior results and greater print success for a longer period of time.Improved components and an enhanced sensor system ensure simple, reliable 3D printing from start to finish.Features enhanced homing, better connectivity as well as drastically reduced clogging and jams.Detects the absence of filament, automatically pauses your print and sends notifications to desktop/mobile.Comes with 6 months warranty.Filament: Small or large spools of PLA filament.Required downloads: Firmware 1.9 or higher and desktop 3.9 or higher.Print technology: Fused deposition modeling.Nozzle diameter: 0.015".Engineered with improved components for better print performance.

UltiMaker TPU 95A in a 2.85mm diameter is a semi‑flexible filament engineered for dependable industrial and functional prints. Combining rubber‑like flexibility with plastic‑like durability, it features a Shore‑A hardness of 95 and elongation at break up to 580%, making it ideal for wear‑resistant, impact‑tolerant parts. The material delivers strong layer bonding and chemical resistance to many common oils and chemicals, while printing more easily and quickly than many TPU alternatives. Its clean White finish ensures professional‑looking results for prototypes, jigs, seals, and protective housings. Optimized for consistent extrusion on compatible 3D printers, UltiMaker TPU 95A provides a fast, seamless 3D printing experience for demanding applications..Works with 3D printers for flexible, durable component production..TPU filament on a spool for semi‑flexible functional printing..2.85mm size supports smooth, consistent extrusion..TPU 95A combines flexibility with strong layer bonding..White finish gives clean, professional‑looking parts.

Print dimensionally accurate ABS parts with the ease of PLA. Print your parts with confidence in ABS-R and RapidRinse, drop your part into tap water, and watch the supports dissolve to nothing in just minutes. Only on METHOD X..Compatible with METHOD X and METHOD X Carbon Fiber 3D printers; supports 2XA extruder.METHOD X patented VECT 110 technology combined with proprietary RapidRinse support delivers outstanding ABS parts with unprecedented ease.Filament diameter: 1.75mm.Comes in white color.Dissolves in pure tap water so it's easy to use in just about any environment.Dissolves faster than PVA and competitive high temperature dissolvable support materials.Store in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from air.Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.Compatible with ABS-R support material

Print with confidence and ease. The MakerBot Sketch supplies you with what you need to integrate 3D printing into the new school year successfully – whether that's back in the classroom or teaching from home. The Extruder for MakerBot Sketch3D Printer is designed for the MakerBot Sketch3D printers as a replacement for damaged or overly clogged extruders..Extruders for the MakerBot Sketch 3D printers are designed as a replacement for damaged or overly clogged extruders.Comes in black color.Pack contains two Sketch extruders

UltiMaker PETG is a versatile and reliable 3D printing filament designed for technical applications, functional parts, and general‑purpose printing. This 2.85mm PETG material provides a strong balance of toughness, chemical resistance, temperature durability, and wear performance, making it suitable for demanding prototypes and end‑use components. The filament’s excellent printability ensures smooth extrusion with minimal warping, while NFC detection enables automatic material recognition and optimized printing profiles on UltiMaker printers. Fully compatible with PVA and Breakaway supports, it allows users to print complex geometries with clean detailing. With a vibrant red color and durable 750g spool, UltiMaker PETG offers a dependable, cost‑effective solution for professionals needing consistent print quality across a wide range of applications..Designed for 3D printers to support broad compatibility..Built as filament in a spool format for dependable printing use..Measures 2.85mm for smooth and accurate extrusion..Made from PETG for strong and chemical‑resistant parts..Bright red color for high‑visibility prints.

The best and most consistent PLA filament for your MakerBot 3D Printer.Guaranteed to have no heavy metals, phthalates, or BPA.Compatible with the MakerBot Replicator (Fifth Generation), MakerBot Replicator 2, and MakerBot Replicator Z46.MakeBot, MarketBot, MarkerBot, ink, roll, plastic, architecture, design, engineering, create, extrude, additive, 3-D.Compatible: MakerBot Replicator 5th Generation Z18 3D Printer.Packing: Spool.Material: Poly lactic acid (PLA).Spool diameter: 9.84".Spool width: 1.57".Spool hub hole: 2".Filament diameter: 1.75 mm.Size: Large.Printing technology: Fused deposition modeling.Temperature: Glass: 60 - 65 deg C, Melting: 150 - 160 deg C, Nozzle: 230 deg C.Prints with bottom layer may have a tendency to curl, to prevent curling, use rafts, easy to use and performs well.Store filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.Adheres well to acrylic and to build plate tape, ensure it is level, clean and oil-free.Verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of 3D model.Weight: 2 lbs..MakerBot Filament is the best, most consistent filament for MakerBot 3D Printers. Tight tolerances to ensure steady flow through the extruder nozzle and the highest print quality for Replicator, Replicator Mini, and Replicator Z18.

The best and most consistent PLA filament for your MakerBot 3D Printer.Guaranteed to have no heavy metals, phthalates, or BPA.Compatible with the MakerBot Replicator (Fifth Generation), MakerBot Replicator 2, and MakerBot Replicator Z46.MakeBot, MarketBot, MarkerBot, ink, roll, plastic, architecture, design, engineering, create, extrude, additive, 3-D.Compatible: MakerBot Replicator 5th Generation Z18 3D Printer.Packing: Spool.Material: Poly lactic acid (PLA).Spool diameter: 9.84".Spool width: 1.57".Spool hub hole: 2".Filament diameter: 1.75 mm.Size: Large.Printing technology: Fused deposition modeling.Temperature: Glass: 60 - 65 deg C, Melting: 150 - 160 deg C, Nozzle: 230 deg C.Prints with bottom layer may have a tendency to curl, to prevent curling, use rafts, easy to use and performs well.Store filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.Adheres well to acrylic and to build plate tape, ensure it is level, clean and oil-free.Verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of 3D model.Weight: 2 lbs..MakerBot Filament is the best, most consistent filament for MakerBot 3D Printers. Tight tolerances to ensure steady flow through the extruder nozzle and the highest print quality for Replicator, Replicator Mini, and Replicator Z18.

The best and most consistent PLA filament for your MakerBot 3D Printer.Guaranteed to have no heavy metals, phthalates, or BPA.Compatible with the MakerBot Replicator (Fifth Generation), MakerBot Replicator 2, and MakerBot Replicator Z39.MakeBot, MarketBot, MarkerBot, ink, roll, plastic, architecture, design, engineering, create, extrude, additive, 3-D.Compatible: MakerBot Replicator 5th Generation Z18 3D Printer.Packing: Spool.Material: Poly lactic acid (PLA).Spool diameter: 9.84".Spool width: 1.57".Spool hub hole: 2".Filament diameter: 1.75 mm.Size: Large.Printing technology: Fused deposition modeling.Temperature: Glass: 60 - 65 deg C, Melting: 150 - 160 deg C, Nozzle: 230 deg C.Prints with bottom layer may have a tendency to curl, to prevent curling, use rafts, easy to use and performs well.Store filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.Adheres well to acrylic and to build plate tape, ensure it is level, clean and oil-free.Verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of 3D model.Weight: 2 lbs..MakerBot Filament is the best, most consistent filament for MakerBot 3D Printers. Tight tolerances to ensure steady flow through the extruder nozzle and the highest print quality for Replicator, Replicator Mini, and Replicator Z18.

UltiMaker Tough PLA is a high‑performance 3D printing material engineered for applications requiring greater durability than standard PLA. With impact strength approaching ABS and excellent dimensional stability, this 2.85mm filament produces robust functional prototypes, tooling, and manufacturing aids without delamination or warping. The material maintains a precise diameter tolerance for consistent extrusion and delivers strong mechanical characteristics, including a tensile strength of 33.4 MPa and a flexural strength of 61.3 MPa. Its matte black finish provides a professional appearance ideal for engineering models and test assemblies. Designed for straightforward printing, Tough PLA is also compatible with PVA and Breakaway supports, enabling complex geometries with clean results. This filament offers a reliable, easy‑to‑use solution for high‑strength printable components across a wide range of 3D printers..Designed for 3D printers to ensure broad compatibility..Built as filament in spool format for dependable printing use..Measures 2.85mm in diameter for consistent material flow..Made from Tough PLA for durable and strong printed parts..Black color for clean professional‑looking models.

Carbon fiber reinforced nylon 12 provides the easiest carbon fiber composite 3D printing experience thanks to superior moisture resistance. Get the specs you require in any environment. Carbon fiber reinforced nylon is optimized for high strength, stiffness, and heat resistance making it perfect for structural applications and metal replacements..Compatible with Method and Method X 3D printers.Carbon fiber-reinforced nylon provides an easy carbon fiber composite 3D printing experience.Comes in black.Superior moisture resistance.66 MPa tensile strength.6000 MPa tensile modulus

UltiMaker Tough PLA is engineered for durable, functional 3D printed parts that require greater strength than standard PLA. With impact performance approaching ABS and excellent stiffness, this 2.85mm filament delivers reliable results for large prototypes, tooling, and manufacturing aids without the risk of delamination or warping. The material maintains a consistent diameter tolerance for smooth extrusion and offers strong mechanical properties, including a flexural strength of 61.3 MPa and a tensile strength of 33.4 MPa. Its gray color provides a clean, professional appearance suitable for production-quality models. Compatible with PVA and Breakaway supports, Tough PLA also allows full design freedom for complex geometries. This filament is ideal for users who need strength, dimensional accuracy, and dependable print performance across a wide range of 3D printer setups..Designed for 3D printers to ensure broad compatibility..Built as filament on a spool for stable and consistent printing use..Measures 2.85mm in diameter for accurate material flow..Made from Tough PLA for strong, functional printed parts..Gray color for professional‑quality model finishes.

Make detailed nontoxic objects with your 3-D printer using this large spool MakerBot cool gray PLA filament. It's a bioplastic for safe use in food service or children's toys. The resistance to curling and warping of this MakerBot cool gray PLA filament enables use in printers without a heated build plate..3D printer filament.Compatible with MakerBot Replicator Z18, MakerBot Replicator+, MakerBot Replicator (5th generation).Color: cool gray.Filament diameter: 1.75mm.Net weight: 2 lbs., material: PLA.Material: Poly lactic acid (PLA).Spool diameter: 9.84".Spool width: 1.57".Spool hub hole: 2".Filament diameter: 1.75 mm.Size: Large.Printing technology: Fused deposition modeling.Temperature: Glass: 60 - 65 deg C, Melting: 150 - 160 deg C, Nozzle: 230 deg C.Prints with bottom layer may have a tendency to curl, to prevent curling, use rafts, easy to use and performs well.Store filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.Adheres well to acrylic and to build plate tape, ensure it is level, clean and oil-free.Verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of 3D model.Weight: 2 lbs..Create colorful, glossy 3-D printing projects with this large spool MakerBot cool gray PLA filament.

UltiMaker Tough PLA in a 2.85mm diameter offers reliable, high‑performance 3D printing for functional prototypes and end‑use parts. Designed to deliver enhanced durability, this filament provides impact strength closer to ABS while maintaining the easy printability of standard PLA. Its heat resistance up to 60°C and excellent mechanical strength make it ideal for engineering models, tooling aids, and custom components. The material features a striking Luminous Green color for visually distinctive prints and ensures smooth extrusion on compatible 3D printers. With a filament length of 256 meters and consistent diameter tolerance, UltiMaker Tough PLA supports consistent layer adhesion and dimensional accuracy, making it a dependable choice for both professional and educational environments..Compatible with 3D printers for reliable everyday fabrication..Designed for functional prints; 3D filament on spool for general use..2.85mm diameter with 0.05mm tolerance supports consistent extrusion..Tough PLA provides ABS‑like impact strength with easy PLA printability..Luminous Green (RAL 6038) delivers vivid, high‑visibility parts.