3D Printer Cartridges

Polylactic acid (PLA) is a thermoplastic derived from renewable resources. Safe for the office, this material is non-toxic and easy-to-print with high reliability and dimensional accuracy. MakerBot precision PLA Material is optimized with the slicing algorithm in software to give you the best results and highest quality. Ideal for the early stages of concept modelling and form studies, PLA printed objects will generally have a glossier look and feel..Environmental-friendly with smooth and shiny appearance.Print professional quality objects with precision and color consistency, just as you imagined.Natural

MakerBot's Precision Dissolving PVA ensures fast and effortless support removal for your most complex prints..3D Printer PVA Filament.3D Printer Accessory.Part Number: 375-0002A

Tough Precision Model Material is a thermoplastic engineered for durable, strong, and dimensionally accurate 3D printed prototypes and fixtures. With up to 2X the impact-strength of ABS and similar tensile and flexural strength properties, MakerBot Tough Material gives you high durability and toughness..Print fascinating 3D objects.Allows you to create objects with minute details.White

The Makerbot Sketch PLA mixed pack is the perfect filament for your Sketch Classroom set or Sketch 3D printer. Makerbot PLA is tuned to work seamlessly with it. This pack includes five spools of Makerbot PLA material (2.2 lbs. each), blue, yellow, red, green, and gray colors..Compatible with Makerbot Sketch 3D printer.Filament spools are great for early concept models.PLA is a corn-based plastic.Colors included: blue, yellow, red, green, and gray.Five spools per pack

Makerbot produces high-quality, long-lasting, ABS-R filament material compatible with METHOD X and METHOD X Carbon Fiber 3D printers, as well as Models 1XA and experimental LABS GEN 2 extruders. ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts..Compatible with METHOD X and METHOD X Carbon Fiber 3D printers, as well as Models 1XA and experimental LABS GEN 2 extruders.ABS-R filament spool for fused deposition modeling.Filament diameter: 1.75mm.ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts.Comes in black color.Smart Spool provides valuable information including material type, color, and amount remaining via an RFID chip directly to Makerbot print.Store in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from air.Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.Compatible with RapidRinse fast-dissolving support material

SR-30 is a proprietary soluble support material developed by Stratasys to work seamlessly with ABS and other higher temp materials. SR-30 requires a specialized Ecoworks solution along with heat and agitation for the best dissolution results..Compatible with METHOD X and METHOD X Carbon Fiber 3D printers, as well as support 2XA extruder.SR-30 is a proprietary soluble support material developed by Stratasys to work seamlessly with ABS and other higher-temperature materials.Comes in white color.Requires a specialized Ecoworks solution along with heat and agitation for best dissolution results

Print dimensionally accurate ABS parts with the ease of PLA. Print your parts with confidence in ABS-R and RapidRinse, drop your part into tap water, and watch the supports dissolve to nothing in just minutes. Only on METHOD X..Compatible with METHOD X and METHOD X Carbon Fiber 3D printers; supports 2XA extruder.METHOD X patented VECT 110 technology combined with proprietary RapidRinse support delivers outstanding ABS parts with unprecedented ease.Filament diameter: 1.75mm.Comes in white color.Dissolves in pure tap water so it's easy to use in just about any environment.Dissolves faster than PVA and competitive high temperature dissolvable support materials.Store in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from air.Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.Compatible with ABS-R support material

The Makerbot smart extruder+ detects the absence of filament, automatically pauses your print and sends notifications to desktop or mobile. It is compatible with replicator mini compact 3D printer and replicator desktop 3D printers. This extruder delivers dependable, consistent performance with superior results using (No Suggestions) PLA filament. The improved components and an enhanced sensor system ensure simple, reliable 3D printing from start to finish. It features enhanced homing, better connectivity as well as drastically reduced clogging and jams. It is easy to replace or swap so you can minimize downtime and continue printing..Smart extruder+ sends notifications to desktop and mobile.Compatible with Replicator mini compact 3D printer (5th generation model) and replicator desktop 3D printer (5th generation model).Tested for 160,000+ hours to ensure reliability, superior results and greater print success for a longer period of time.Improved components and an enhanced sensor system ensure simple, reliable 3D printing from start to finish.Features enhanced homing, better connectivity as well as drastically reduced clogging and jams.Detects the absence of filament, automatically pauses your print and sends notifications to desktop/mobile.Comes with 6 months warranty.Filament: Small or large spools of PLA filament.Required downloads: Firmware 1.9 or higher and desktop 3.9 or higher.Print technology: Fused deposition modeling.Nozzle diameter: 0.015".Engineered with improved components for better print performance.

Print with confidence and ease. The MakerBot Tough Smart extruder for the MakerBot Replicator+, and MakerBot Replicator (5th Generation) is a culmination of product design and 160,000 hours of rigorous testing that delivers dependable, consistent performance with superior results using MakerBot Tough filament..Extruder for the MakerBot Replicator+, MakerBot Replicator (5th Generation).Extruder is a culmination of product design and 160,000 hours of rigorous testing that delivers dependable, consistent performance.Nozzle diameter: 0.015".Comes in black.Required downloads: Firmware 2.2 or higher and MakerBot Print.Dimensions: 7"H x 5"W x 2.5"D.Magnetically swappable for easy maintenance and material switching.Active jam prevention protects your extruder and your prints.Filament detection pauses print and notifies user if a spool runs out.Specifically optimized to print durable, usable parts with MakerBot Tough filament.6-month manufacturer limited warranty

Carbon fiber reinforced nylon 12 provides the easiest carbon fiber composite 3D printing experience thanks to superior moisture resistance. Get the specs you require in any environment. Carbon fiber reinforced nylon is optimized for high strength, stiffness, and heat resistance making it perfect for structural applications and metal replacements..Compatible with Method and Method X 3D printers.Carbon fiber-reinforced nylon provides an easy carbon fiber composite 3D printing experience.Comes in black.Superior moisture resistance.66 MPa tensile strength.6000 MPa tensile modulus

The MakerBot METHOD is a professional-grade, tinker-free 3D printer that allows you to print ultra-precision parts with a 60°C heated chamber. Delivering uncompromised performance right out of the box, METHOD is the only platform in its category to provide guaranteed dimensional accuracy on printed parts. Developed from the ground up leveraging industry-leading Stratasys® technology, METHOD features high quality components like a heated build chamber, precision dissolvable supports, and dry-sealed material bays. Perfect for quick prototypes, fit tests and concept iterations. METHOD delivers maximum innovation with minimal investment..60°C circulated heated chamber.Dual Performance Extruders.Dry-sealed material bays.Wifi Connectivity and 21 on-board sensors.Remote monitoring and printing.25 compatible CAD file types.5" full color capacitive touch-screen.WHAT'S IN THE BOX: 1 MakerBot METHOD 3D Printer, 1 Spring Steel Build Plate, 1 Performance Extruder 1 Model, 1 Performance Extruder 2 Support , 1 Nozzle Brush, 1 Hex Key, 1 USB A-to-B Cable, 1 US Power Cord, and 1 EU Power Cord

Print with confidence and ease. The MakerBot Sketch supplies you with what you need to integrate 3D printing into the new school year successfully – whether that's back in the classroom or teaching from home. The Extruder for MakerBot Sketch3D Printer is designed for the MakerBot Sketch3D printers as a replacement for damaged or overly clogged extruders..Extruders for the MakerBot Sketch 3D printers are designed as a replacement for damaged or overly clogged extruders.Comes in black color.Pack contains two Sketch extruders

Explore the 3D Printing Frontier. Add a burst of color to three-dimensional objects with official AnkerMake filaments. Impress others with impeccable final designs. Each filament is derived from natural elements that make it 1.5X more durable than current PLA material, providing a more efficient and precise printing experience. More prints, less environmental impact. Each filament is made from non-toxic, ecologically friendly resources that provide enough material to fulfill a multitude of creative projects..Compatible with the Ankermake M5, Makerbot, and XYZ Printing.PLA+ Filament for high-quality prints.1.75 mm diameter.2 pack of White PLA.AnkerMake Filament is made out of non-toxic bio-materials extracted from corn..Quality guaranteed with more than 22 tons of material printed..AnkerMake Speed Lab certification ensures this filament meets high-demand printing tests conducted inside the AnkerMake Lab..Your printed model is 1.5× tougher than normal PLA—even when cruising at 5X speed.

The tools you need for 3D print preparation and post processing - includes spring-loaded wire-snips and a sturdy metal spatula both conveniently packaged in a branded carrying case..3d printer accessory tool kit for your printer.Compatible with: MakerBot Method

Explore the 3D Printing Frontier. Add a burst of color to three-dimensional objects with official AnkerMake filaments. Impress others with impeccable final designs. Each filament is derived from natural elements that make it 1.5X more durable than current PLA material, providing a more efficient and precise printing experience. More prints, less environmental impact. Each filament is made from non-toxic, ecologically friendly resources that provide enough material to fulfill a multitude of creative projects..Compatible with the Ankermake M5, Makerbot, and XYZ Printing.PLA+ Filament for high-quality prints.1.75 mm diameter.2 pack of Red PLA.AnkerMake Filament is made out of non-toxic bio-materials extracted from corn..Quality guaranteed with more than 22 tons of material printed..AnkerMake Speed Lab certification ensures this filament meets high-demand printing tests conducted inside the AnkerMake Lab..Your printed model is 1.5× tougher than normal PLA—even when cruising at 5X speed.

Meet the all-new Makerbot Sketch Classroom, the comprehensive 3D printer solution designed to accelerate learning and design-thinking. Featuring a dual-printer set up, educators can offer the ideal student-to-printer ratio to drive 3D printing classroom success right from the start. With teacher and student certifications and more than 600+ lesson plans included, educators can integrate more interactive design projects and increase student engagement. Classroom 3D printer management is easier than ever with one queue management dashboard via MakerBot Cloud. Students can share design projects wirelessly and teachers can manage queues easily between printers..Dimensions: 16.6" x 17".Features easy-to-use dual-printer setup with reliable, tinker-free performance.Includes ISTE certified self-paced 3D printer training for both teachers and students.Includes cloud-based 3D printing file management with MakerBot Cloud printing file management software integrated with TinkerCad and Fusion 360.Includes more than 600 certified lesson plans from educators all across the country.Package includes: 1 x sketch printers, 3 x spools of PLA, 2 x build plates, 1 x spatulas, 1 x snips, 1 x seats in teacher certifications, 10 x seats in student certifications, MakerBot Cloud with print queuing.2-year manufacturer limited warranty