Standard Ethernet Cables

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

StarTech RJ45PATCH10 Cat5e Patch Cable with Snagless RJ45 Connectors, 10ft, Blue.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat5e cable runs.Backed by StarTech lifetime warranty.StarTech.com® HDMIDVIMF 2" HDMI to DVI-D Video cable adapter effectively routes video signal between HDMI and DVI-D device. Supports 1920 x 1200 resolution video signal.

With a polyvinyl chloride jacket, the StarTech N6PATCH75BL 75' blue snagless Cat 6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity. It patches from hub to distribution panel and is great for use with Gigabit networks. This 4-pair UTP cable connects workstation to wall outlet..Cable length: 75'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, ETL verified, TIA/EIA-568-B.1-2001 T568B certifications and standards.Color: Blue, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

With a polyvinyl chloride jacket, the StarTech N6PATCH15WH 3' white snagless Cat 6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity. It patches from hub to distribution panel and is great for use with Gigabit networks. This 4-pair UTP cable connects workstation to wall outlet..Category 6 patch cable connects workstation to wall outlet.Convenient length of 3' extend the reach of network devices.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.EIA/TIA-568A, TIA/EIA-568-B.1-2001 T568B, CMG rated, UL listed, ETL verified and RoHS Green compliant.Comes in white color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to support a broad range of Ethernet applications such as Power over Ethernet.Molded strain relief prevents the bending of the cable at sharp angles at the RJ-45 connector to minimize the stress at the plug termination point.Carefully constructed and tested, to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this two-foot black cable ensures peak performance throughout your local area network (LAN)..2 foot Cat6 Cable.Cat6 UTP patch cord rated for high-speed 1 Gbps communications.Over 38% slimmer than standard Cat6 cables to increase airflow in full racks.Easy to route around corners and through crowded cable management panels.Snagless RJ45 connectors prevent tabs from being damaged during installation.This product is covered by a Lifetime Limited Warranty

The Comprehensive® 25' gray Cat6 snagless patch cable is perfect for network devices. It has one RJ-45 male connector on both ends for reliable connectivity. This cable features 4-pair 24 AWG stranded copper conductors and 50 u gold-plated copper alloy contact for excellent conductivity. It supports voice/data/video distribution applications up to 550 MHz. The snagless boot offers easy installation. The X-traflex PVC jacket of this patch cable withstands rigorous usage..Patch cable is great for voice, data and video distribution applications.Cable length: 25'.Connections: One RJ-45 male connector on both ends.X-traflex PVC jacket for added durability and 4-pair 24 AWG stranded bare copper conductor for excellent signal transmission.Meets RoHS, UL and EIA/TIA 568B.2 certification or standards.50 u gold contacts with copper alloy plating offers maximum conductivity.Comes in gray color.Diameter: 6.2 mm outer jacket.DC resistance: 9.8 ohm at 100 m (maximum) conductor.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Snagless boot offers easy and simple installation.Perfect for Gigabit 1000/100/10 BASE-T, 4/16 Mbps token ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps A, 622A and T1 voice applications.Weight: 0.4 lbs..Comes with lifetime warranty

Belkin CAT5e RJ45 Patch cable in blue color is 3' long and has snagless-type moldings to ensure protection for connection. Cable offer reliable connection from IT hardware to network and ideal for use with 10 or 100 base-T networks..3' long.Blue.1 each.Cat5e, 10/100 base-T patch computer cables.Snagless.The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

The Comprehensive Cat6 snagless patch cable of 100' long, is suitable for distributing voice, video and data on high speed Ethernet and Gigabit networks at 350 MHz bandwidth. This RJ-45 male to RJ-45 male cable in white, has molded snagless boots that offer quick and easy installation while assuring superior strain relief. The 4 twisted pair cable has 24 AWG bare copper stranded wire for good conductivity. It has a PVC jacket that offers protection against severe damage. The cable has gold-plated contacts for good transmission ability..Cable length: 100'.Connections: RJ45 male on first end to RJ45 male on second end.Durable polycarbonate connector, copper alloy plated with 50u gold contact for good connectivity and polyvinyl chloride jacket for protection.Meets all Cat5E TIA/EIA, EIA/TIA 568B.2 and RoHS standards.Good performance.Comes in white color.Supports voice/data/video distribution applications up to 350 MHz.Network device supportable.Conductors: 4 Twisted pairs 24 AWG bare copper stranded cable.Has 89 Ohm/km maximum conductor DC resistance and 100 Ohm/km minimum insulation resistance.Weight: 1.5 lbs..Comes with lifetime limited warranty.Network Patch cable with molded low profile snagless boot makes installing quick and easy.

Protect a high speed network from noise and electromagnetic interference when connecting with our Snagless Shielded Cat6 patch cable. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use..Features Category 6 cable type.Features Stranded.1 x RJ-45 Male Network offers a secure and reliable connection with a compatible network device.Certifications & Standards: UL94V-0

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The C2G 22014 15' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15ft.Blue.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty

This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this three-foot black cable ensures peak performance throughout your local area network (LAN)..6 inch Cat6 Cable.Cat6 UTP patch cord rated for high-speed 1 Gbps communications.Over 38% slimmer than standard Cat6 cables to increase airflow in full racks.Easy to route around corners and through crowded cable management panels.Snagless RJ45 connectors prevent tabs from being damaged during installation.This product is covered by a Lifetime Limited Warranty

Make Power-over-Ethernet-capable Gigabit network connections - 10ft Cat6 Cable / 10' Ethernet Patch Cable / 10 ft Gigabit Cat6 Cable - Green Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 10 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

The C2G 22011 15' Cat5e 350MHz snagless unshielded blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.34 lbs..Comes with lifetime warranty.Category 5e for Network Device.6" LP4 to LP4 SATA power Y cable adapter features powers an IDE (LP4 connected) drive using a SATA power connector from the computer power supply.

Tripp Lite N201-007 RJ-45 CAT-6 Patch Cable.CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.7' CAT-6 for easy tethering.Comes with a lifetime limited warranty

The C2G 22011 15' Cat5e 350MHz snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.35 lbs..Comes with lifetime warranty.Category 5e for Network Device.C2G® 29932 8' Black power extension cord with NEMA connectivity on both ends allow you to extend power cord for flexibility. The 16 AWG cord provides reliable connection.

Make Fast Ethernet network connections using this high quality Cat5e Cable, with Power-over-Ethernet capability - 6ft Cat5e Patch Cable - 6 ft Cat 5e patch cable - 6' Cat5e Patch Cord - 6ft RJ45 Patch Cable - 6' Cat 5 Snagless Patch Cable - Blue.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat5e cable runs.Backed by StarTech lifetime warranty.StarTech.com® SCNM9FF25 25' Gray data transfer cable with DB-9 female connectivity designed to provide long lasting connection. Enables quick and optimum transmission of data.

Connect your computer system to a router, switch or hub with the Monoprice CAT-6 Cable that offers reliable Ethernet connectivity. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-6 for seamless connection over a network.Designed to transmit data at 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.The Monoprice 2' CAT-6 Ethernet Network Cable, Gray, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

This Cat6 (molded) patch cable is ETL verified to meet/exceed all Category 6 performance standards. Features molded strain relief to help prevent connector damage, 23 Gauge wire construction and 50 micron gold connectors. Backed by Lifetime Warranty..Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

The C2G ® 4' RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.4ft.Blue.Tripp Lite 6' Null modem gold cable uses copper conducting material to resist corrosion and allows you to connect 2 serial devices that require cross-wired configuration.

Comprehensive® Snagless patch cable has molded low profile snagless boot for easy installation. The 24 AWG bare copper stranded cable comes with gold-plated RJ-45 male connector on first and second end for providing uninterrupting connection. The flexible X-traflex PVC jacket of this patch cable facilitates easy installation and is highly durable. Comes in black color for attractive look. Suitable for 1000 BASE-T gigabit Ethernet network applications..Network cable supports voice/data/video distribution applications up to 550 MHz.Easy-to-install 50' long cord.RJ-45 male to male connectors for reliable connections.X-traflex jacket provides double shielding and bare copper strand increases coverage area.Comes in black color for a new look.4 twisted pairs conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Copper conductor for good conductivity.Offers guaranteed performance with 1000 BASE-T; 100 BASE-T; 10 BASE-T and 4/16 Mbps token ring.Meets all Cat6 TIA/EIA standards, Verified to EIA/TIA 568B.2.Features copper alloy plating with 50u gold contact for durability and has a 6.2mm outer diameter.Supports voice/data/video distribution applications up to 550 MHz, snagless boot for easy installation.Weighs 0.8 lb.Comes with lifetime warranty.Comprehensive® 550MHz Snagless patch cable in black color has RJ45 connector on both ends for easy connectivity. Supports voice/data/video distribution applications up to 550 MHz.

The C2G 3975 6' black Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Category 6 for Network Device.RJ-45 Male.6ft.Black.Certifications & Standards: TIA/EIA.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

Connect your computer system to a router, switch or hub with the StarTech C6PATCH50OR CAT-6 Cable that offers reliable Ethernet connectivity. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor..CAT-6 for efficient data transfer across a network.Dual gold-plated RJ-45 male connectors for a flawless connection.50' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.The StarTech C6PATCH50OR 50' CAT-6 Patch Cable, Orange, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

CAT-5e for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty

Startech® 3' Cat 6a Shielded Snagless RJ-45 Male/Male Patch Cables9.High quality cat6a cable (stp) for dependable ethernet connectivity.Easy-to-install 3' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.High quality construction protect against electro-magnetic or radio frequency interference from nearby equipment with cables.Comes in blue color for a new look.StarTech.com® C6ASPAT3BL 3' Blue Cat 6a patch cable is useful for 10 gigabit Ethernet network connections. Snagless RJ45 connectors offers reliable connection.

The C2G® 7' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.7ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.178 lbs..Comes with lifetime warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 100 Mbps.Gold-plated RJ-45 male network connectors on both sides for dependable network connectivity.7' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Experience a simpler way to connect devices with the entire business network.Features Category 6 cable type.Features Snagless.Features 1 x RJ-45 Male Network connector, permitting you to establish a connection with a network device

The C2G® 7' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.21 lbs..Comes with lifetime warranty

StarTech N6PATCH5GN Cat6 Patch Cable with Snagless RJ45 Connectors, 5ft, Green.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Backed by Startech lifetime warranty.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Offers a reliable network connectivity.Features Category 6 cable type.Protects the plug and socket from dust when plugged in

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

The C2G 3' green Cat6 snagless patch cable is suitable for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. It has one RJ-45 - male connector on both the ends for reliable connectivity. The 24-AWG stranded copper conductors ensure optimal signal conductivity. It has HDPE insulation and PVC jacket for long lasting durability. The unshielded twisted pairs reduce interference and structural return loss. This cable with snagless design protects the connectors from damaged to offer long period optimal performance..Cat6 UTP patch cable with snagless design protect clips while plugging and unplugging.Cable length: 3'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG (7/0.20) copper conductors for better conductivity.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in green color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.12 lbs..Comes with lifetime warranty

The Belkin 6' yellow Cat6 snagless patch cable features RJ-45 50-micron gold-plated male connectors on both ends for clear signal transmission. This male/male cable is great for VoIP, video and file transfers. It helps to maximize your network speed with higher bandwidth. This patch cable features a staggered pin configuration, has bare stranded copper conductors for high conductivity and a PVC jacket for added durability. It is compatible with Belkin Omniview SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switch..Cat6 UTP snagless patch cable is suitable for VoIP, video and file transfers.Cable length: 6'.Connections: one RJ-45 male connector on both ends.PVC Jacket for added durability and 4-pair 24 AWG bare stranded copper conductors for excellent signal transmission.Meets ISO/IEC 11801, TIA/EIA-568-B.2-1 standards and certifications.Contact material: 50 micron gold-plated.Compatible with Belkin Omniview SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switchComes in yellow color.Diameter: 5.9 mm + 0.15 mm jacket.Dielectric strength: 1.5 kV (AC).Dielectric strength: 1.5 kV (AC).Resistance: 93.8 Ohm/km/20 deg C max, Impedance: 100 Ohm + 15 Ohm at 1 - 550 MHz.Mutual capacitance: 56 pF/m max.Propagation delay: 536 ns/100 m max. at 550 MHz, Structural return loss: 8.6 dB min at 550 MHz.Staggered pin configuration ensures optimal data transmission.CM flame retardant tested.Comes with lifetime limited warranty

The Comprehensive® 25' white category 5e snagless patch cable features RJ45 male connectors on both ends for enhanced connectivity. This cable with 155 Mbps data rate features polycarbonate connector, X-traflex PVC jacket and copper alloy plating with 50u gold contact for better conductivity. This 4-twisted pair 24 AWG bare copper stranded cable with 350 MHz bandwidth has snagless boot for easy installation..Category 5e snagless patch cable resists breakage.Cable length: 25'.Connections: RJ45 male on both ends.Connectivity: Wired.Material: Polycarbonate connector, X-traflex PVC jacket, copper alloy plated with 50u gold contact, 4 twisted pairs 24 AWG bare copper stranded cable.Meets RoHS, UL rated, 568A, 568B TIA/EIA certifications and standards.Bandwidth: 350 MHz.Data transfer rate: 155 Mbps.Color: White.Jacket OD: 5.3 mm.Conductor DC resistance: 89 ohms/km, Insulation resistance: 100 ohms/km (minimum).Snagless boot for easy installation.Weight: 0.4 lbs..Comes with lifetime warranty

10ft Cat6 Snagless Unshielded (UTP) Network Patch Cable - Red.Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Red

C2G® CAT5E UTP Patch cable in blue color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 25' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. H-D PE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet network..Enhanced Category 5 high-speed cabling to distribute data, voice and video.These cables will handle bandwidth intensive applications up to 350 MHz and beyond.Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 MHz wire.1 x RJ-45 Male Network to 1 x RJ-45 Male Network

The 4XEM™ 25' gray RJ-45 male/male cat6 patch cable features molded connectors with PVC integral strain relief for enhanced performance. The snagless design in this cable, protects the locking tabs on the RJ-45 connectors from damage during installation. This 24 AWG patch cable with 4-pair UTP, is great for 500 MHz/1 Gbps communication. It is perfect for category 6 applications..Cat 6 patch cable for network devices.Cable length: 25'.Connections: RJ-45 male on both ends.Connectivity: Wired.Copper conductors for better conductivity and a PVC jacket for added safety.Meets ETL, ANSI/TIA/EIA-568-B.1-2001 and T568B certifications and standards.Comes in gray color.Wire gauge: 24 AWG.Wireless standards: IEEE 802.3ab, IEEE 802.5, Jacket type: CMG.Supports network device and notebook.4-Pair UTP cabling to reduce crosstalk.Features: Snagless, stranded, molded.Weight: 0.41 lbs..Comes with lifetime limited warranty

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.20' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The Comprehensive® 7' snagless Cat6 patch cable in blue color, has one RJ-45 male connector on both the ends. The 24 AWG bare copper conductor and 50-micron gold plated connector ensure optimal signal conductivity. With its polyvinyl chloride jacket, this patch cable ensures long lasting durability. It features snagless boot to offer easy installation..Snagless patch cable for distributing data, voice and video on today's high speed Ethernet and gigabit networks.Cable length: 7'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Bare copper, Jacket: Polyvinyl chloride (PVC), Connector: Polycarbonate.Meets RoHS, UL, Cat6 TIA/EIA, EIA/TIA 568B.2 certifications and standards.Color: Blue, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 550 MHz, Number of conductors: 4 twisted pairs.Conductor DC resistance: 9.8 ohm at 100 m max.Snagless boot for easy installation.Weight: 5 lbs..Comes with lifetime warranty