Stranded Copper Patch Cables

The StarTech WIRC6PATBLRL stranded Cat 6 patch cable in blue, is 1000' long and has PVC jacket for insulation. The cable provides optimal network performance and is perfect solution for emerging gigabit network. This cable is perfect to use in any 10Base-T, 100Base-TX or 1000Base-TX network and in home or office environments..Patch cable is perfect for use in any 10Base-T, 100Base-TX or 1000Base-TX (Gigabit Ethernet) network and in home, office and other environments.Dimensions: 1000'L.Comes in blue color and features polyvinyl chloride jacket with 24 AWG copper conductor for optimum insulation.Bare wire connectors at both the ends for efficient connectivity.Cable rating: Cat 6 - 500 MHz.Stranded cable provides excellent protection.Number of conductors: 4 pair UTP.Fire rating: CMG rated (general purpose).Cat 6 cable is the great way to connect emerging gigabit network.Expertly constructed to offer durability.Cat 6 wire provides the ultimate in network performance.Cat 6 cable improves upon the Cat 5e specification by providing twice the available bandwidth (up to 500 MHz).Contains patch cable.Meets RoHS, EIA/TIA-568 Cat 6 - up to 500 MHz certifications and standards.Comes with lifetime limited warranty

Make Fast Ethernet network connections using this high quality Cat5e Cable with Power-over-Ethernet capability / 1000ft Cat5e Ethernet Bulk Cable / 1000 ft Roll Blue Cat5e Stranded UTP Patch Cable / 1000' Blue Cat5e Wiring - Blue Cat 5e Cable - High quality 24 AWG copper wire - Convenient measurement of network runs with our foot-marked cable - Packaged in a Reelex box for easy pulling and fewer kinks - Designed for use with Fast Ethernet networks - Lifetime Warranty.Colored cables allow for easy identification and troubleshooting.Easy to use and install.Backed by StarTech.com's lifetime warranty

The Belkin 1' green CAT6 snagless patch cable improves the network speed with higher bandwidth. It has RJ45M male connectors on the both the ends for reliable connectivity. This cable is ideal for transferring VoIP, video and file. It has four pair of 24 AWG bare stranded copper conductor construction for optimal signal conductivity. The 50-micron, gold-plated connectors ensure clear transmission. It has PVC jacket for durability and the HDPE insulation for secured optimal performance. The snagless molds safeguard the cable connectors while installation..RJ-45 Male.1ft.Green.Connectivity: Wired.Bare stranded copper conductor for better conductivity and PVC jacket for added durability.Meets ISO/IEC 11801 and TIA/EIA-568-B.2-1 certifications or standards.Cable type: Cat6.Connector plating: 50 micron gold-plated Connector plating.Comes in green color.Impedance: 100 +/- 15 ohm at 1 - 550 MHz, Resistance: 93.8 ohm/km at 20 deg C max, Capacitance: 56 pF/m max.Dielectric strength: AC 1.5 kV, Spark test: 2.5 kV, Structural return loss: 8.6 dB min at 550 MHz, Propagation delay: 536 nS/100 m max at 550 MHz.Data transfer rate: 100 Mbps.Increases your network speed with higher bandwidth.Protects your network for future expansion.2-row staggered pin configuration controls cross-talk at hyper-frequency.Comes with lifetime warranty

CAT6 PATCH CABLE 3FT YELLOW.Snagless patch cable is perfect for VoIP, video and file transfers.Cable length: 3'.Connections: One RJ-45 male connector on both the ends.Connectivity: Wired.Bare stranded copper conductor for better conductivity and PVC jacket for added durability.Meets ISO/IEC 11801 and TIA/EIA-568-B.2-1 certifications or standards.Cable type: Cat6.Connector plating: 50 micron gold-plated Connector plating.Comes in yellow color.Impedance: 100 +/- 15 ohm at 1 - 550 MHz, Resistance: 93.8 ohm/km at 20 deg C max, Capacitance: 56 pF/m max.Dielectric strength: AC 1.5 kV, Spark test: 2.5 kV, Structural return loss: 8.6 dB min at 550 MHz, Propagation delay: 536 nS/100 m max at 550 MHz.Data transfer rate: 100 Mbps.Increases your network speed with higher bandwidth.Protects your network for future expansion.2-row staggered pin configuration controls cross-talk at hyper-frequency.Comes with lifetime warranty

The StarTech.com® C6PATCH2RD 2' UTP molded patch cable in red, has one RJ-45 male connector on both the ends for reliable connectivity. The 4-pair 24 AWG stranded copper conductors ensure optimal signal conductivity. It features PVC jacket to withstand harsh environmental conditions. This cable has colored hoods for departmental color-coding..UTP molded patch cable for Fast Ethernet network connections.Cable length: 2'.Color: Red, Material: PVC jacket.Connectors: One RJ-45 male on both the ends.Conductor: 4 pair 24 AWG stranded copper.Rated: 500 MHz.Connector: Molded RJ45.Colored hoods for departmental color-coding.CMG rated (general purpose).Meets RoHS, ETL certifications and standards.Comes with lifetime warranty

StarTech.com's 100ft gray Cat5e UTP Patch Cable is constructed of only top quality materials (100% copper conductors, 24 Gauge Wire, 50 micron Gold Connectors) to ensure optimum durability and performance, and is backed by our Lifetime Warranty..50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Backed by StarTech lifetime warranty.High quality 24 AWG copper wire

StarTech C6PATCH2BL 2ft Cat-6 Blue Molded RJ45 UTP Gigabit Cat-6 Patch Cable.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Backed by Startech lifetime warranty

Make Power-over-Ethernet-capable Gigabit network connections - 10ft Cat6 Cable / 10' Ethernet Patch Cable / 10 ft Gigabit Cat6 Cable - Green Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 10 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

StarTech C6PATCH25GR 25ft Cat-6 Gray Molded RJ45 UTP Gigabit Patch Cable.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Backed by StarTech lifetime warranty

With a polyvinyl chloride jacket, the StarTech C6PATCH100WH 100' white molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Cable length: 100'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, ETL, TIA/EIA-568-B.1-2001 T568B certifications and standards.Color: White, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.Has colored hoods for departmental color coding

This patch cable is ETL verified to meet or exceed all Category 6 performance standards and features a durable white jacket that simplifies departmental color coding while providing rugged flexibility for network connections..Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.Meets RoHS, ETL, TIA/EIA-568-B.1-2001 T568B certifications and standards

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G ® 3' blue Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

Make Power-over-Ethernet-capable Gigabit network connections - 3ft Cat6 Cable / 3' Ethernet Patch Cable / 3 ft Gigabit Cat6 Cable - Black Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 3 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by StarTech lifetime warranty.Constructed with top quality components

The Belkin™ A7J304-1000-RED Cat5e stranded bulk patch cable in red, helps in connecting your network outlet with a patch panel or to terminate your own patch cords. This cable consists of 8 stranded 24 AWG wires, that are suitable for 10/100Base-T networks, connecting up to 1000'..Cat5e PVC stranded UTP bulk cable is used to connect a network outlet with a patch panel or to terminate patch cables.Dimensions: 1000'L (cable).Red HDPE (insulation).Bare stranded copper conductor.PVC jacket.Conductor size: 24 AWG x 4 pairs.Jacket diameter: 5.5 +/- 0.15 mm.Impedance: 100 ohms.Rating: 75 deg C, 300 V, conductor resistance: 89.2 ohms/km/20 deg C max.Mutual capacitance: 56 pF/m max, dielectric strength: AC 1.75 kV/0.15 sec.Spark test: AC 1.75 kV/0.15 sec, flame retardant test: CM.Characteristic impedence: 100 +/- 15 ohms at 1 - 100 MHz, structural return loss: 19 dB min at 100 MHz, propagation delay: 538 nS/100 m max at 100 MHz.Category 5e performance rated for any 10Base-T and 100Base-T networks.Meets ISO/IEC 11801, TIA/EIA-568-B.2 standards.Comes with limited lifetime warranty

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

The C2G 3' green Cat6 snagless patch cable is suitable for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. It has one RJ-45 - male connector on both the ends for reliable connectivity. The 24-AWG stranded copper conductors ensure optimal signal conductivity. It has HDPE insulation and PVC jacket for long lasting durability. The unshielded twisted pairs reduce interference and structural return loss. This cable with snagless design protects the connectors from damaged to offer long period optimal performance..Cat6 UTP patch cable with snagless design protect clips while plugging and unplugging.Cable length: 3'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG (7/0.20) copper conductors for better conductivity.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in green color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.12 lbs..Comes with lifetime warranty

StarTech.com's 50ft Blue Cat6 UTP Snagless Patch Cable is constructed of top quality materials (100% Copper conductors, 23 Gauge Wire, 50 micron Gold Connectors) to ensure optimum performance and durability and is backed by our Lifetime Warranty..RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty.Constructed with top quality components

The C2G 2' blue Cat6 snagless patch cable has a RJ-45 male connector on each end for reliable connectivity. This cable features a snagless design that protects the connectors from damage and offers long-lasting optimal performance. It also features HDPE insulation and a PVC jacket for durability. The 24-AWG bare stranded copper conductors and 50-micron gold plated copper alloy connectors ensure optimal signal conductivity. This cable is suitable for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, and 4/16 Mbps token ring applications..Category 6 for Network Device.RJ-45 Male.2ft.Blue.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in blue color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.069 lbs..Comes with lifetime warranty.StarTech.com® PXT101NB10 10' Black power cord with NEMA 1-15P and IEC 60320 C7 connectivity helps to extend your laptop power cord length. 18 AWG cord provides reliable connection.

10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty

The 4XEM™ 25' gray RJ-45 male/male cat6 patch cable features molded connectors with PVC integral strain relief for enhanced performance. The snagless design in this cable, protects the locking tabs on the RJ-45 connectors from damage during installation. This 24 AWG patch cable with 4-pair UTP, is great for 500 MHz/1 Gbps communication. It is perfect for category 6 applications..Cat 6 patch cable for network devices.Cable length: 25'.Connections: RJ-45 male on both ends.Connectivity: Wired.Copper conductors for better conductivity and a PVC jacket for added safety.Meets ETL, ANSI/TIA/EIA-568-B.1-2001 and T568B certifications and standards.Comes in gray color.Wire gauge: 24 AWG.Wireless standards: IEEE 802.3ab, IEEE 802.5, Jacket type: CMG.Supports network device and notebook.4-Pair UTP cabling to reduce crosstalk.Features: Snagless, stranded, molded.Weight: 0.41 lbs..Comes with lifetime limited warranty

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G ® 4' RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.4ft.Blue.Tripp Lite 6' Null modem gold cable uses copper conducting material to resist corrosion and allows you to connect 2 serial devices that require cross-wired configuration.

Make Power-over-Ethernet-capable Gigabit network connections - 50ft Cat6 Cable / 50' Ethernet Patch Cable / 50 ft Gigabit Cat6 Cable - Yellow Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 50 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

The C2G ® 3' red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..It is used for networking purposes. It provides high-speed data transfer and reliable connectivity for network infrastructure..The cable length is 6 feet..Features the following connections: Connector Type: RJ45 Pin Count: 8 pins (standard for RJ45 connectors).cable is made with a 27 AWG gauge, a Low Smoke Zero Halogen (LSZH) jacket, bare copper conductors, and an Red exterior color.High-Speed Data Transfer: Supports data transfer rates up to 10 Gbps (10,000 Mbps)..Compatible with a wide range of devices that have RJ45 Ethernet ports. Here are a few examples: Computers (Desktops and Laptops), Routers, Switches..Comes with a Life time warranty.

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

The Comprehensive® 25' white category 5e snagless patch cable features RJ45 male connectors on both ends for enhanced connectivity. This cable with 155 Mbps data rate features polycarbonate connector, X-traflex PVC jacket and copper alloy plating with 50u gold contact for better conductivity. This 4-twisted pair 24 AWG bare copper stranded cable with 350 MHz bandwidth has snagless boot for easy installation..Category 5e snagless patch cable resists breakage.Cable length: 25'.Connections: RJ45 male on both ends.Connectivity: Wired.Material: Polycarbonate connector, X-traflex PVC jacket, copper alloy plated with 50u gold contact, 4 twisted pairs 24 AWG bare copper stranded cable.Meets RoHS, UL rated, 568A, 568B TIA/EIA certifications and standards.Bandwidth: 350 MHz.Data transfer rate: 155 Mbps.Color: White.Jacket OD: 5.3 mm.Conductor DC resistance: 89 ohms/km, Insulation resistance: 100 ohms/km (minimum).Snagless boot for easy installation.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G 22014 15' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15ft.Blue.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty

StarTech® 5 ft Cat5e Gray Molded RJ45 UTP Cat 5e Patch Cable - 5ft Patch Cord.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Category 5e.5 ft.1 x RJ-45 Male

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

The C2G ® 3' red Cat6 snagless shielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 26 AWG bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 3'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in red color.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.High quality cable and plug construction effectively minimizes near-end crosstalk levels.Protects from EMI/RFI interference.Weight: 0.05 lbs..Comes with lifetime warranty.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments

StarTech shielded Cat6a cables ensure fast and dependable 10 Gigabit network connections by protecting against electromagnetic interference (EMI/RFI) and noise. The result is a fast and safe network. Each cable is tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Plus, the RJ45 connectors are both snagless and molded to prevent damage to the connector clips and the cable. This helps to avoid accidental disconnections and decreases in network performance..CAT-6a snagless shielded (STP) Ethernet network patch cable designed for error-free 10Gbps multi-gigabit connections.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality 100% stranded copper and features a Low Smoke Zero Halogen (LSZH) jacket; comes in white.Snagless molded boots protect the tab/latch on each RJ45 connector.Tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks.Meets the ANSI/TIA-568.2-D standards for patch cord performance.The 27 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.Braided construction resists damage from bending.Supports PoE devices up to 100W PoE++.Lifetime limited manufacturer warranty

The 4XEM™ 15' blue RJ-45 male/male cat6 patch cable features molded connectors with PVC integral strain relief for enhanced performance. The snagless design in this cable, protects the locking tabs on the RJ-45 connectors from damage during installation. This 24 AWG patch cable with 4-pair UTP, is great for 500 MHz/1 Gbps communication. It is perfect for category 6 applications..Cat 6 patch cable for network devices.Cable length: 15'.Connections: RJ-45 male on both ends.Connectivity: Wired.Copper conductors for better conductivity and a PVC jacket for added safety.Meets ETL, ANSI/TIA/EIA-568-B.1-2001 and T568B certifications and standards.Comes in blue color.Wire gauge: 24 AWG.Wireless standards: IEEE 802.3ab, IEEE 802.5, Jacket type: CMG.Supports network device and notebook.4-Pair UTP cabling to reduce crosstalk.Features: Snagless, stranded, molded.Weight: 0.27 lbs..Comes with lifetime limited warranty

The C2G ® 6" RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. It features RJ-45 male connectors on both ends for enhanced connectivity. The 24 AWG stranded bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. This bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modems, DSL/cable modems, patch panels and other high performance networking applications..Type: Network Cable.Cable Type: Category 6.Cable Length: 0.5'.Size: 6".Color: Blue.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Diameter: 6.2 mm + 0.03 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.03 lbs..Comes with lifetime warranty.952 C2G - KVM & Networking 6" Cat6 Snagless Unshielded Network Patch Cable - Exponentially reduces impedence and structural return losses

The Comprehensive® CAT6-3GRY-25VP 3' Cat6e snagless patch cable in grey, comes with male RJ45 network connector that provides up to 500 MHz bandwidth for high-speed signal transmission. It has a molded low profile, snagless boot that offers you for quick and easy installation every time by providing superior strain relief. Each individual pair is attached together to ensure proper spacing between the twists of the wire which greatly reduces loss compared to standard 100 MHz cable. It comes in a pack of 25..Cat6 snagless patch cable provides up to 550 MHz bandwidth for high-speed signal transmission.Dimensions: 3'L (cable).Compatible with network device.Comes in gray color.25/pack.Connector on first end: 1 x RJ-45 male network, connector on second end: 1 x RJ-45 male network.Bare stranded copper conductor.PVC jacket.Conductors: 4 twisted pairs 24 AWG bare copper stranded cable.Polycarbonate connector.Contact material: Copper alloy plated with 50u gold.Conductor DC resistance: 9.8 ohm at 100 m maximum.Cable style: Molded snagless boot.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Offers great performance.Meets all Cat6 TIA/EIA, verified to EIA/TIA 568B.2, RoHS, Green, UL standards.Weight: 2.5 lbs..Comes with lifetime warranty

The C2G 22011 15' Cat5e 350MHz snagless unshielded blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.34 lbs..Comes with lifetime warranty.Category 5e for Network Device.6" LP4 to LP4 SATA power Y cable adapter features powers an IDE (LP4 connected) drive using a SATA power connector from the computer power supply.

The C2G ® 50' male to male category 6 snagless blue patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 50'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Features durable polycarbonate connector and four twisted pair 24 AWG stranded bare copper for good conductivity.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Unshielded twisted pair technology for less signal loss.Comes in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 1.35 lbs..Comes with lifetime warranty

StarTech.com® UTP Cat 6 Patch cable in blue color offers reliable signal routing in IT hardware of 500 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 35' cable has eight 24 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Snagless design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Cat6 utp patch cable offers reliable signal routing.Easy-to-install 35' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in blue color for a new look.StarTech.com® N6PATCH35BK 35' Blue UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.

The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty

The Comprehensive® 25' gray Cat6 snagless patch cable is perfect for network devices. It has one RJ-45 male connector on both ends for reliable connectivity. This cable features 4-pair 24 AWG stranded copper conductors and 50 u gold-plated copper alloy contact for excellent conductivity. It supports voice/data/video distribution applications up to 550 MHz. The snagless boot offers easy installation. The X-traflex PVC jacket of this patch cable withstands rigorous usage..Patch cable is great for voice, data and video distribution applications.Cable length: 25'.Connections: One RJ-45 male connector on both ends.X-traflex PVC jacket for added durability and 4-pair 24 AWG stranded bare copper conductor for excellent signal transmission.Meets RoHS, UL and EIA/TIA 568B.2 certification or standards.50 u gold contacts with copper alloy plating offers maximum conductivity.Comes in gray color.Diameter: 6.2 mm outer jacket.DC resistance: 9.8 ohm at 100 m (maximum) conductor.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Snagless boot offers easy and simple installation.Perfect for Gigabit 1000/100/10 BASE-T, 4/16 Mbps token ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps A, 622A and T1 voice applications.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G 3975 6' black Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Category 6 for Network Device.RJ-45 Male.6ft.Black.Certifications & Standards: TIA/EIA.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Comes with lifetime warranty

The 4XEM™ 75' gray RJ-45 Cat5e molded UTP patch cable is perfect for high performance networking applications. It has one RJ-45 male connector on both ends for connectivity. The snagless design safeguards the locking tabs on the RJ45 connectors from damage during installation. It has molded-strain relief construction for longer life and features copper conductor for high electrical conductivity. This molded PVC cable supports 350 MHz/1 Gbps data communication..Cat5e molded UTP patch cable for network device and notebook.Cable length: 75'.Connections: One RJ-45 male connector on both ends.CMG rated PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.Meets IEEE 802.3ab, IEEE 802.5 and TIA/EIA-568-B.1-2001 T568B certification or standards.Comes in gray color.Features molded connectors with integral strain relief for added durability.Bandwidth: Rated for 350 MHz/1 Gbps communication.Snagless design aids to protect the locking tabs on the RJ45 connectors from damage or snap-off while installing.Comes with limited lifetime warranty

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

The Comprehensive® CAT6-7GRY-25VP 7' Cat6 snagless patch cable in gray, saves your time and money while adding convenience. This cable provides up to 550 MHz bandwidth for a high-speed signal transmission. The snagless cable has a molded low profile, snagless boot that makes installing the cable quick and easy every time while providing superior strain relief. This cable is perfect for distributing data, voice and video on today's high-speed Ethernet and Gigabit networks..Snagless patch cable is ideal for 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps token ring (IEEE 802.5), 100 VG-AnyLAN applications.Dimensions: 7' cable length.Gray PVC jacket.Packaging: 25/pack.Conductor: 24 AWG 4 twisted pairs stranded bare copper.Connections: 1 x RJ-45 male on both ends.Contact material: Copper alloy plated with 50u gold.DC resistance: 9.8 Ohm/100 m.Snagless boot for easy installation.Bandwidth: 550 MHz.Meets RoHS, UL standards.Weight: 5 lbs..Comes with lifetime warranty