Tilt And Swivel Monitor Arm

Tripp Lite Dwm3770x 37"-70" Articulating Mount.165 lb Load Capacity.Metal.Black.Fits 37"-70" Tvs & Monitors.Articulated Arm With 6 Pivots Offers A Full Range Of Motion.Convenient 1-touch Display Adjustment.Built-in Level.Tilts +/-15deg.Swivels 120deg.Vesa(r) 200 X 200, 300 X 300, 400 X 200, 400 X 400 & 600 X 400.5-year Warranty.Provides full-motion articulation and display reposition frees up valuable space in your workstation, even after installation.Its sleek design features easy one-touch display adjustment with tilt and swivel capabilities.Its durable, all-metal frame with scratch-resistant, powder-coat finish combats the stress of repeated use and blends easily into any decor.RoHS Compliant.Contains DWM3770X full-motion flat-screen wall mount, mounting hardware, cardboard installation template and owner's manual.Comes with 5 years warranty

Mount-It! Dual monitor desk mount raises two displays off the desk surface, thus saving workspace and creating a productive display configuration to increase productivity. Allows you to use two monitors side by side to increase your productivity. Raising the monitors to an ergonomic height improves posture to help prevent eye, back and next strain caused by incorrect postures. Several height levels of this monitor mount will allow you to choose the right height for the optimal posture. The curved bar allows the monitors to slightly face each other to create a more immersive viewing experience - ideal for work or gaming. The horizontal bar is 31" inches wide and allows you to easily connect two 27" monitors side by side. The monitor mount is compatible with all monitor brands with standard bolt holes in the back. It can support VESA 75x75 (3"x3" square hole pattern) and 100x100 (4"x4" square hole pattern) configurations..Screen sizes 13 to 27 inches.Install monitors in portrait or landscape orientation.Load Capacity: 22 lbs. (per monitor).Height Adjustable (along notches on the pole).Tilt: 45 degrees up and down.Swivel: 15 degrees left and right.C-clamp and Grommet installation options.Comes with cable management to neatly organize monitor cables.Desk thickness: 0.39" min to 3.5" max.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

Triple Aluminum Gas Spring C-Clamp Desk Mount - 32"..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.Rotation, swivel, and tilt functions enable adjustments for comfortable viewing.Weighs 21.6 lbs..Dimensions: 60.24"H x 27.56"W x 7.5"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

Raise your monitors to an ergonomic position and work more efficiently with this dual monitor stand. Designed for performance, this monitor stand is made from high-strength steel for durability. Freestanding base sits on top of any desktop for quick installation. The arms can be raised or lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. Universal VESA plate is compatible with most monitors. Fits VESA sizes 75x75mm and 100x100mm or most screen sizes 19-32 inches..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 17.6 lbs per arm for a total capacity of 35.2 lbs..FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 80 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 15.5" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 17" to 27" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Mount-It! Dual Monitor Stand (MI-2781B) allows you to adjust two monitors to the optimal viewing height, clearing desk space and enabling the most comfortable work place experience.

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS2000 is designed to do exactly that. Combining industrial influences with a minimalist design, this dual gas shock monitor mount allows for finger-tip adjustments to be made to the height and orientation of your screens. Raise, tilt, swivel and rotate your monitors on the fly to ensure they’re always in an ideal position. The detachable base provides a seamless connection to your desk, while its easy-to-use clamping mechanism can be secured to any ledge or grommet hole up to 2 inches thick. To ensure a clutter-free setup, the DMS2000 also includes cable management clips to conveniently route your cables..Fits most flat panel computer monitors from 17” to 32”.Supports two monitors weighing 3.3 lb (1.5 kg) to 16.5 lb (7.5 kg) each.Accommodates VESA sizes of 75x75 and 100x100.Ball joint provides a 25° viewing angle in any direction.360° of swivel and monitor rotation for vertical and horizontal screen orientation.Dual arms provide up to 23.3” (59.3 cm) of reach per arm, depending on screen size and orientation.Adjustable tension gas shock system provides 9.5” (24 cm) of fingertip height adjustment.Integrated cable management.Aluminum construction with a painted finish.Installation manual and all monitor mounting hardware for either desk edge or grommet hole installation is included.Two year manufacturer's warranty.Not your average monitor mount.

Create an efficient workspace with triple the screens, and say goodbye to neck, back, and shoulder pain with this monitor mount. Heavy duty steel and aluminum construction can hold three 32" monitors. Height adjustable, full motion design lets you work in a more comfortable ergonomic position. Quickly tilt, swivel, and rotate your screens as needed while you work. Base includes built-in USB, audio, and microphone ports that can be connected to your CPU. Integrated cable management system keeps cords organized..Triple Monitor Desk Mount fits most of 13"-32" Screens.Tilt, Swivel, and Full Motion Features.Integrated USB 3.0 and audio ports built into the base.Monitor can be installed either in portrait or landscape shape.Load capacity 154 lbs. per monitor, 46 lbs. total.Material: Aluminum, Steel, Plastic.Swivel: +180°,-180°.VESA Compatible: 75x75mm, 100x100mm.10-year manufacturer limited warranty

The enhanced Kontour K2C manual height-adjustable column mount articulating arms are a great solutions for the office, healthcare facilities or home. K2C mounts provide manual height adjustment on the column for optimal ergonomic positioning. Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment. Easily clamps to edge of desk, through standard grommet hole, or through bolt hole and the tool-free cable management clips provide a clean, professional look..The Chief K2C120B is a monitor mount specifically designed as an articulating column single-monitor desk mount. Its primary use is to provide ergonomic positioning for a single monitor, allowing for adjustments in height, tilt, swivel, and rotation..It supports with a screen size ranging from 10 to 30 inches..The Chief Kontour K2C120B offers 7 inches of manual height adjustment..The Chief Kontour K2C120B is typically finished in black. As for the material, it is constructed from high-quality aluminum, which provides durability and a sleek, professional look..It offers the following range of motion and adjustments Tilt Angle: ±15°, Rotation Angle: 90°, Swivel Angle 180°, Pivot Angle 90°.The Chief Kontour K2C120B monitor mount has a weight capacity of 40 lbs..This monitor mount has the following dimensions Height 19.51 inches (maximum extension),Depth 6.01 inches (minimum depth).The Chief Kontour K2C120B monitor mount is compatible with VESA 75 x 75 mm and 100 x 100 mm mounting patterns.RoHS Compliance Ensures the product is free from hazardous substances.

Easily raise your monitor to an optimal viewing height, reducing the strain on your neck and shoulder while working with Mount-It! MI-1766B dual-monitor wall mount. Each arm comes with a gas-spring mechanism for easy height adjustment without the need for tools. Full-motion articulating arms are fully adjustable for placing the monitor to almost any viewing angle. Comes with necessary hardware for an easy mounting process including mounting screws, anchors, washers, and VESA screws. Integrated cable management channels in each arm keep AV and power cords organized. Both monitors can be placed in landscape or portrait position. The articulating arms reach a max extension of 16.6" from the wall..Easily raise your monitor to an optimal viewing height, reducing the strain on your neck and shoulder while working with dual-monitor wall mount.Dual mount supports 17" to 32" screens.Each arm has counterbalanced gas-spring arms for effortless height adjustment.Comes in black.Tilt range: +/-35 degrees; screen rotation: 180 degrees (landscape and portrait modes), swivel range: 180 degrees left and right.Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Tilt, swivel, and rotation features: easily transition from portrait to landscape view.Perfect for small offices, game rooms, and anywhere space is at a premium.Comes with integrated cable management channels.Maximum wall extension: 16.6".Supported by manufacturer's limited lifetime warranty

MI-31114 low-profile single monitor wall mount features tilt, swivel and rotation to achieve the perfect monitor placement throughout the day. Mounting your monitor on the wall frees up desk and office space and raises your monitor to eye level, for a healthier way to work by helping you to maintain a better posture. This premium single monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. Heavy load capacity carries up to 44lbs and only requires one wall stud for easier installation. Fits monitors up to 32”..Single Monitor Wall Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can swivel 180 degrees and rotates 360 degrees.Load capacity 33 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

This single monitor wall mount features a full motion arm for smooth and versatile monitor adjustments. Adjust the height, tilt, swivel and rotation of the monitor to find the perfect placement. Mounting to the wall not only raises your monitor to eye level for a healthier way to work, but it maximizes office and desk space. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 44 lbs..Compatible with the Mount-It! Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Raise your monitors at an ergonomic position and free up valuable desk space with this stacked dual monitor mount. This mount is made from high grade steel built to resist scratches and supports screens up to 17.6 lbs each arm and screen size up to 32". This includes clamp and grommet to fit a variety of desktops. Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Raise your monitor to a comfortable viewing height with this monitor mount.Supports two up to 32" monitors for versatile use.Adjustable height: 16.5"H for each monitor.Made of heavy-duty, cold-rolled steel.-45-45-degree tilt and -180-180-degree rotation adjustment options enable optimal viewing.-180-180-degree rotation allows monitors to be oriented vertically or horizontally.Support up to 17.6 lbs. on each arm: 35.2 lbs. total.Compatible with: VESA 75mm x 75mm and 100mm x 100mm mounting patterns.Clamp or grommet fixation.Cable management.Detachable monitor mounting plate.Comes in black.Supported by manufacturer's limited lifetime warranty

Premium quality durable gas spring assisted full-motion articulating monitor wall mount provides smooth, precise and effortless viewing height adjustment up to 11.02 inches. Rotating VESA plate supports portrait or landscape monitor orientation. Detachable VESA plate provides for easy monitor installation and adjustment. Compliant with VESA standard mounting hole pattern 75x75mm and 100x100mm to fit most 17" to 32" flat and curved monitors. Ergonomic enhanced features, include height adjustment, 180° arm swivel, monitor tilt angles of +/- 35° (upward/downward), and 180° (left/right) pan angle, provide unlimited viewing angle positions for optimal viewing comfort. Adjustable tension gas spring movement accommodates different weight loads to ensure smooth height adjustment, holds monitor weighing up to 17.6 lbs (8kg). The monitor arm can extend up to 16.61 inches from the wall, great for areas with severe space constraints. Integrated cable management system keeps cables neat, organized, and out of the way for a clean clutter-free desktop. Designed for single wood stud mounting fits perfectly into limited wall spaces for convenient and easy installation..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.-35 to 35-degree tilt, -35 to 35-degree pan, and -35 to 35-degree rotation adjustment options enable optimal viewing.Weighs 3.86 lbs..Dimensions: 14.57"H x 4.5"W x 20.6"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.3-year manufacturer limited warranty

Mount your screen up to 32" in size in either portrait or landscape orientation. The intuitive 25.7" x 9.5" keyboard tray underneath comes with a padded wrist rest to relieve additional stress on your wrists. Cable management system hides unwanted cables and wires from sight. The pneumatic counterbalance gas springs allow your monitor to tilt 35 degrees, swivel 180 degrees, and rotate 360 degrees so you can find the optimum viewing angles. Clamp or grommet onto your work desk..Raise your monitor to a comfortable viewing height with this monitor mount.Compatible with screens up to 32".Height adjustability allows you to sit or stand while working.Made of steel.35-degree tilt and 360-degree rotation adjustment options enable optimal viewing.25.7" wide tray is large enough for a keyboard and mouse side by side.17.6 lb. weight capacity.Dimensions: 31.8"H x 25.7"W.Clamp or grommet mounts.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Articulating arm allows you to rotate the screen to your perfect viewing location.Great for use in any home or office environment.Supported by manufacturer's limited lifetime warranty

This single monitor desk mount features a full motion arm for smooth monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor mount is designed to position your monitor perfectly for a healthier, more comfortable way to work. Save desk space while improving posture by elevating your monitor off of the desk to eye level. The arm can extend out up to 22.5” for a long reach, great for larger desks or team collaboration. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base fits desks up to 3” thick, making it an easy addition to any workspace. Fits monitor’s up to 32” and can carry up to 19.8lbs..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 28 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

Improve the ergonomics of your dual monitor setup with DML2000. Supporting monitors up to 27", this fully adjustable desktop stand enables positioning of your monitors for improved posture and productivity. Monitor height is achieved with a toolless lever that allows for on-the-fly height adjustments while a micro height adjust feature allows your monitors to be perfectly aligned. To make deployment a snap, the detachable VESA monitor plate gives you the freedom to attach and remove your monitor quickly and easily. This stand can be attached to any desk with its included desk clamp or grommet mount and cable management pathways are provided to keep your workspace distraction free..IMPROVED ERGONOMICS – Featuring tilt, swivel, and 360° monitor rotation to support portrait or landscape orientations, DML2000 allows you to position your dual monitors to improve workplace ergonomics and line-of-sight..ON-THE-FLY ADJUSTMENTS – A toolless lever allow easy on-the-fly height adjustments – useful for shared workspaces that accommodate various users. A micro height adjust feature is included to ensure monitor alignment..EASY DEPLOYMENT – The detachable VESA monitor plate lets you to work on a flat surface instead of supporting your monitor during installation. The plate easily slides onto the stand and can be removed quickly for servicing..CLEAN AESTHETICS – Included cable management hooks keep wires tidy for a professional look and reduces distractions in the workspace..UNIVERSALLY COMPATIBLE – The DML2000 supports dual 27" monitors weighing up to 22.1 lbs. each. The stand can be clamped to nearly all desks from 0.4" to 2.8" thick and includes hardware for desk grommet installation.

This dual monitor wall mount features two swivel arms for smooth full motion monitor adjustments. From monitor tilt to swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual Monitor Wall Mount fits most of 13" -27" Screens.Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 360 degrees.Load capacity 44 lbs..Compatible with the Mount-It! Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

Premium quality durable gas spring assisted full-motion articulating dual monitor wall mount provides smooth, precise and effortless viewing height adjustment up to 11.02 inches. Rotating VESA plate supports portrait or landscape monitor orientation. Detachable VESA plate provides for easy monitor installation and adjustment. Compliant with VESA standard mounting hole pattern 75x75mm and 100x100mm to fit most 17" to 32" flat and curved monitors. Ergonomic enhanced features, include height adjustment, 180° arm swivel, monitor tilt angles of +/- 35° (up/down), and 180° (left/right) pan angle, provide unlimited viewing angle positions for optimal viewing comfort. Adjustable tension gas spring movement accommodates different weight loads to ensure smooth height adjustment, holds monitor weighing up to 17.6 lbs. (8kg). Each monitor arm can extend up to 16.61 inches from the wall, great for areas with severe space constraints. Integrated cable management system keeps cables neat, organized, and out of the way for a clean clutter-free desktop. Designed for single wood stud mounting fits perfectly into limited wall spaces for convenient and easy installation..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.-35 to 35-degree tilt, -35 to 35-degree pan, and -35 to 35-degree rotation adjustment options enable optimal viewing.Weighs 6.94 lbs..Dimensions: 14.57"H x 3.94"W x 40.7"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.3-year manufacturer limited warranty

Full motion range allows you to get your screens to the right height, reducing strain on your eyes and back. This mount works well with a variety of brands, and can handle up to 35 pounds with ease. Just be sure that your monitor is VESA 75x75 and 100x100 compatible, and you will be golden! Keep your desk looking extra tidy thanks to the cable management clips located underneath each arm. Installation is a breeze, and we provide the manual as well as the necessary hardware..Single Monitor Desk Stand fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can swivel 90 degrees and rotates 360 degrees.Cable clip on the pole organizes your cables.Load capacity 17.6 lbs..Supported by manufacturer's limited lifetime warranty

This single monitor desk mount features a full motion arm with smooth, full motion adjustments including height, tilt, swivel and rotation. This desk mount is designed to position your monitor perfectly for a healthier, more comfortable way to work throughout the day. Save desk space while improving posture by elevating your monitor off of the desk to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The grommet base easily attaches to any desk from 1” to 2” thick, making it an easy addition to any workspace. Heavy-duty aluminum construction gives this mounting arm a 30lb load capacity, plenty for most monitors on the market and fits monitors up to 32”..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up or down 15 degrees and rotates 360 degrees.Load capacity 30 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

Free up space by mounting your flat-panel TV on a wall, with full-motion adjustment capability. Maximize space while creating an impressive display. This heavy-duty steel TV wall mount securely supports flat-screen TVs from 22" to 55". The arm extends easily to provide smooth, full-motion positioning for ideal viewing. Mount your monitor to save valuable space. Mount your flat-screen TV in a location that's convenient for visitors, clients and employees. This TV wall mount is ideal for the lobby, boardroom or other venues, providing an impressive and secure way to display a flat-panel TV or mount digital signage. It also frees up valuable space. The TV wall mount supports most 22" to 55" (558.8 to 1397 mm) LED or LCD flat panel TVs weighing up to 77 lb. (35 kg).Full-motion adjustment. The TV wall mount provides full-motion adjustment capability. The arm extends up to 19.8" (503 mm) from the wall to provide a wide range of movement and accommodate different screen positions and angles. The arm can also fold to tuck-in closely to the wall, providing a minimized profile, which enables you to position your display just 1.9" (49 mm) from the wall. The TV wall mount swivels +90° / -90° to provide maximum viewing flexibility. The mount also tilts +2° / -12°, letting you angle your TV display toward your audience. With the tilt feature, you can mount your TV lower or higher than eye level and still view it comfortably. Heavy-duty construction. The robust steel design safely and securely supports your flat-screen TV, to protect your investment. The TV wall mount also includes plastic brackets for cable management to keep cables neatly out of sight. The FPWARTB1M is backed by a StarTech.com 2-year warranty and free lifetime technical support..Heavy-duty steel TV wall mount with articulating arm.Supports most 22"-55" LED, LCD flat panel TVs up to 77 lb. (35kg).Full-motion adjustment with arm extension up to 19.8" (503 mm)

This sit/stand desk mounted workstation turns an existing desk into a more active workspace quickly, with easy installation using a C-clamp or grommet base. Experience a more comfortable way to work throughout the day by adjusting the full-motion fluid gas spring arm and the full-motion monitor mounts. This workstation features two USB 3.0 ports, for charging or data transfer, in the front of the mount, keeping CPU connection within reach and easy to access..Raise your monitor to a comfortable viewing height with this dual-monitor sit/stand desk mount.Supports most flat-panel monitors up to 27" for versatile use.Height adjusts from 23.1" to 42.9" for comfortable viewing.Made of steel and comes in black.10-degree tilt and 180-degree rotation adjustment options enable optimal viewing.Features an attached ergonomic keyboard tray, phone slot, and storage space for office supplies.Weight capacity: 13.2 lbs. per monitor.Dimensions: 23.1"-42.9"H x 26"W x 36.5"-40.7"D.Compatible with VESA 75 x 75mm, 100 x 100mm mounting patterns.Two integrated USB 3.0 ports on the front of the mount, keeping the connection within reach.Attaches to an existing desk using either the C-clamp or grommet base.180-degree rotation allows the monitors to be oriented vertically or horizontally.Supported by manufacturer's limited lifetime warranty

MI-321116 single monitor desk mount features an articulating arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor mount is designed to position your monitor perfectly for a healthier, more comfortable way to work. Save desk space while improving posture by elevating your monitor off of the desk to eye level. The arm can extend out up to 22.5” for a long reach, great for larger desks or team collaboration. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. Features both a c-clamp and grommet base to adapt to multiple desktop surfaces. Heavy-duty aluminum construction fits monitors up to 32” and can hold up to 19.8lbs..Single Monitor Desk Mount fits most of 13" -27" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 30 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

This VESA-compliant TV wall mount lets you place your digital signage, monitor or television where everyone can see it best. It's ideal for office, hybrid and work-from-home environments, including office cubicles, art tables and lab workbenches. The stylish aluminum mount fits most flat-panel displays from 13" to 32" and supports up to 22 lbs. The articulating arm adjusts independently to optimize viewing angles, minimize glare and improve ergonomics. To minimize screen glare, reduce eye fatigue and increase viewing comfort, the mount features -15° to +15° tilt, -90° to +90° swivel and full 360° rotation for positioning your screen just right. For hassle-free display compatibility, this slat wall mount supports the following VESA mounting hole patterns: 75 x 75 and 100 x 100. Requires slat wall system for installation; and easily attaches to the Slat Rail with Posts (DMSWKITTAA) or the Slat Rail (DMSWSLATTAA), both sold separately. Your monitor is elevated above the desktop, which frees up precious workspace. You can also slide the monitor along grooves and then adjust the viewing angle for optimal ergonomics. Grooves on both sides of the slat rail accommodate independently adjustable monitor setups when desks are pushed together back-to-back. The unit is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts..Mounts your 13 to 32 in television or monitor on a slat wall surface to provide optimal viewing angles..TV mount for slat walls adjusts viewing angle easily with just a single touch..-15° to +15° tilt, -90° to +90° swivel and 360° rotation help you find the perfect angle..Stylish aluminum construction blends into any decor and supports up to 22 lb..Requires installation of Slat Rail with Posts (DMSWKITTAA,) sold separately.

Tilt Monitor Arm AMRW1 is designed with spec of 100 x 100 / 75 x75 mm. The AMRW1 is one of our LCD Monitor arm which includes universal modules with swivel, tilt, & rotation functions..Tilt Monitor Arm.Patented Torque Adjust.Spring structure for tilt.Stylish design.Easy installation

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS1000 is designed to do exactly that. Combining industrial influences with a minimalist design, this gas shock monitor mount allows for finger-tip adjustments to be made to the height and orientation of your screen. Raise, tilt, swivel and rotate your monitor on the fly to ensure it’s always in an ideal position. The detachable base provides a seamless connection to your desk, while its easy-to-use clamping mechanism can be secured to any ledge or grommet hole up to 2 inches thick. To ensure a clutter-free setup, the DMS1000 also includes cable management clips to conveniently route your cables..Fits most flat panel computer monitors from 17” to 32”.Supports monitors weighing 3.3 lb (1.5 kg) to 16.5 lb (7.5 kg).Accommodates VESA sizes of 75x75 and 100x100.Ball joint provides a 25° viewing angle in any direction.360° of swivel and monitor rotation for vertical and horizontal screen orientation.Single arm provides up to 23.3” (59.3 cm) of reach.Adjustable tension gas shock system provides 9.5” (24 cm) of fingertip height adjustment.Integrated cable management.Aluminum construction with a painted finish.Installation manual and all monitor mounting hardware for either desk edge or grommet hole installation is included.Two year manufacturer's warranty.Not your average monitor mount.

This VESA-compliant TV wall mount lets you place your digital signage, monitor or television where everyone can see it best. It's ideal for office, hybrid and work-from-home environments, including office cubicles, art tables and lab workbenches. The stylish aluminum mount fits most flat-panel displays from 13" to 32" and supports up to 22 lbs. The articulating arm adjusts independently to optimize viewing angles, minimize glare and improve ergonomics. To minimize screen glare, reduce eye fatigue and increase viewing comfort, the mount features -15° to +15° tilt, -90° to +90° swivel and full 360° rotation for positioning your screen just right. The arm extends up to 16 " from the slat. For hassle-free display compatibility, this slat wall mount supports the following VESA mounting hole patterns: 75 x 75 and 100 x 100. Requires slat wall system for installation and easily attaches to the Slat Rail with Posts (DMSWKITTAA) or the Slat Rail (DMSWSLATTAA), both sold separately. Your monitor is elevated above the desktop, which frees up precious workspace. You can also slide the monitor along grooves and then adjust the viewing angle for optimal ergonomics. Grooves on both sides of the slat rail accommodate independently adjustable monitor setups when desks are pushed together back-to-back are also available. Compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts..TV mount for slat walls adjusts viewing angle easily with just a single touch..-15° to +15° tilt, -90° to +90° swivel and 360° rotation help you find the perfect angle..Stylish aluminum construction blends into any decor and supports up to 22 lb..Requires installation of Slat Rail with Posts (DMSWKITTAA) sold separately.

Looking for a heavy duty, height adjustable, VESA compatible monitor stand? Then the MI-792 is your answer. This VESA compatible desk mount tilts 15 degrees up and down in either direction, and screens can rotate a full 360 degrees. You can adjust the height of the pole a total of 17" inches. Monitor can be rotated into portrait or landscape orientation and will hold in place..FREE STANDING DUAL MONITOR STAND: Fits two monitors up to 27", with a maximum support weight of 22 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors..FULLY ADJUSTABLE: Two monitor mount arms can tilt up and down 15 degrees, swivel left-right 360 degrees, raise and lower 17" inches on the pole, and each screen can be rotated and placed in portrait or landscape orientation independent of one another..WELL-DESIGNED: Double monitor mount has full motion, height adjustable articulating arms and are made of heavy duty steel, and have integrated cable management clips on each to keep your cables organized. Comes with both interchangeable free standing and grommet bases..EASY INSTALLATION: 2 monitor desk stand comes with all mounting hardware, tools, and instructions necessary for assembly..Black finish completes overall aesthetic appeal.V-shaped base is certain to keep your mount from shaking, wobbling, or toppling over, while it still can be bolted directly to the desk through a suitable grommet hole.Supported by manufacturer's limited lifetime warranty.Mount two adjustable monitors at one desk with this Mount-It! dual-monitor desk stand.

Versatility meets affordability with the 2EZCLAMP. The solid articulating monitor arm featuring 90 tilt, 180 swivel, 360 rotation helps create unrivaled ergonomic experience and productivity. The individual VESA Plate height adjustment is designed to enable dual monitors to be perfectly aligned. When updating the monitors, the detachable VESA plate enables a quick and easy attachment. The 2EZCLAMP clears up valuable desk space removing unwanted clutter..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Supports up to 32" monitors for versatile use.Comes in black and made of steel.-45 to 45 degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.Two bays organize essentials such as pens, clips, etc..Weighs 17.64 lbs..Dimensions: 35.16"H x 19.6"W x 5"D.Compatible with: VESA 100 x 100mm mounting patterns.3-year manufacturer limited warranty

This LCD Monitor Pole with Double-Link Swing Arm provides a secure and elevated position for two flat-screen monitors to help free up valuable desk and work space. It's fully adjustable tilt, rotate, side-to-side, height, and tension settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. LCD monitors can be easily rotated around the pole to allow others to view presentations and other multimedia from almost any direction. Durable metal construction and a sturdy clamp provide a quick, easy, and secure mount to a desktop or other horizontal surface. Ready to install with included hardware, there's no need to drill holes into desks or countertops. Thus mount is made of high grade steel and aluminum. Fits most LCD monitors 13" to 27". Supports up to 22 lbs. per monitor. Every joint is able to be tightened, so you can adjust exactly how fluid/stationary you want everything, simply remove the cap on the joint and tighten the bolt underneath..Raise your monitor to a comfortable viewing height with this dual monitor desk mount.Supports up to 27" monitors for versatile use.Height-adjustable with two screws holding arms securely on pole.Sturdy aluminum construction features integrated clips and port for cable management.A +80/-80 degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable for optimal viewing.Each arm securely holds up to 22 lbs. to fit most monitors (44 lbs. total load on height-adjustment assembly).Compatible with the standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black finish completes overall aesthetic appeal.The C-clamp base has an integrated double lock to ensure stable mounting onto any surface up to 4" thick.Supported by manufacturer's limited lifetime warranty

This VESA-compliant TV wall mount lets you place your digital signage, monitor or television where everyone can see it best. It's ideal for office, hybrid and work-from-home environments, including office cubicles, art tables and lab workbenches. The stylish aluminum mount fits most flat-panel displays from 13" to 32" and supports up to 22 lbs. The articulating arm adjusts independently to optimize viewing angles, minimize glare and improve ergonomics. To minimize screen glare, reduce eye fatigue and increase viewing comfort, the mount features -15° to +15° tilt, -90° to +90° swivel and full 360° rotation for positioning your screen just right. The arm extends up to 10" from the slat rail. For hassle-free display compatibility, this slat wall mount supports the following VESA mounting hole patterns: 75 x 75 and 100 x 100. Requires slat wall system for installation and easily attaches to the Slat Rail with Posts (DMSWKITTAA) or the Slat Rail (DMSWSLATTAA), both sold separately. Your monitor is elevated above the desktop, which frees up precious workspace. You can also slide the monitor along grooves and then adjust the viewing angle for optimal ergonomics. Grooves on both sides of the slat rail accommodate independently adjustable monitor setups when desks are pushed together back-to-back. Compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts..Mounts your 13" to 32" television or monitor on a slat wall surface to provide optimal viewing angles...TV mount for slat walls adjusts viewing angle easily with just a single touch..-15° to +15° tilt, -90° to +90° swivel and 360° rotation help you find the perfect angle..Stylish aluminum construction blends into any decor and supports up to 22 lb..Requires installation of Slat Rail with Posts (DMSWKITTAA, sold separately).

Adjusting the height of desktop flat-panel displays at home or the office often requires a lot of effort - loosening fasteners, moving the monitor up and down, tightening knobs to secure the monitor in place. With the Tripp Lite DDV1727S, just pull your display all the way to the top, then lower it to one of 10 preset height positions from 12.6 to 19.7 inches. The monitor arm is compatible with flat-panel screens ranging from 17 to 27 inches. Maximum weight capacity is 13.2 pounds. Cables are efficiently wrangled through the rear of the monitor stand to keep them organized. This desk mount for your computer monitor adjusts independently to optimize viewing angles and improve ergonomics. To minimize screen glare, reduce eye fatigue and increase viewing comfort, the mount features -20° to +60° tilt, 60° swivel and 180° rotation for position your screen in portrait or landscape orientation. Easy screen adjustment lets you quickly find just the right angle without interrupting your workday. A heavy-duty base keeps the freestanding mount stable on a desk or table during adjustment. VESA (Video Electronics Standards Association) promotes uniformity in the video electronics industry by developing standards for TVs and monitors. For hassle-free display compatibility, this monitor stand supports the following VESA mounting hole patterns: 75 x 75 and 100 x 100. Mounting hardware is included. The durable steel frame withstands the stress of repeated adjustments. Its scratch-resistant powder-coated finish tolerates frequent handling and blends easily into any home or office décor..Raise your monitor to a comfortable viewing height with this monitor mount.Supports up to 27" monitors for versatile use.Made of steel.-20 to 60 degree tilt and 180-degree rotation adjustment options enable optimal viewing.180-degree rotation allows monitors to be oriented vertically or horizontally.Weighs 5.5 lbs..Dimensions: 21.26"H x 12.6"W x 7.87"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty

The SIIG CE-MT3H11-S1 is a robust and versatile single monitor desk mount designed to enhance your workspace ergonomics and organization. Supporting monitors from 17" to 49" and up to 50.7 lbs, this mount features a gas spring-assisted arm that allows smooth and effortless height adjustments up to 23". Its full-motion articulation enables 45° upward tilt, 30° downward tilt, 180° rotation, 180° swivel, and 90° pan swivel, providing optimal viewing angles and the flexibility to switch between portrait and landscape orientations. Constructed with durable aluminum alloy material in a sleek white finish, it complements modern office aesthetics. The mount includes integrated cable management to keep your workspace tidy. Compatible with VESA patterns of 75x75mm, 100x100mm, 200x100mm, and 200x200mm, it offers both C-clamp and grommet mounting options for easy installation on most desks or tables. Compliant with RoHS standards, the SIIG CE-MT3H11-S1 is an excellent choice for those seeking a reliable and adjustable single monitor mounting solution..This is a heavy-duty gas spring single monitor desk mount designed for ergonomic positioning and enhanced workspace efficiency..Supports monitors ranging from 17" to 49" with a single-arm configuration, accommodating weights up to 50.7 lbs..Offers height adjustment up to 23" for optimal viewing angles..Features a white finish and is constructed from durable aluminum alloy material..Provides full-motion articulation with 45° upward tilt, 30° downward tilt, 180° rotation, 180° swivel, and 90° pan swivel, allowing for flexible monitor positioning..Includes integrated cable management; no additional bays, drawers, or shelves..Weighs approximately 12.72 lbs.Measures 30.9" in height, 25.8" in width, and 5" in depth.Compatible with VESA mounting patterns of 75x75mm, 100x100mm, 200x100mm, and 200x200mm..Complies with RoHS environmental standards.

Lights, camera, action. No need for the DIY setups you've used in the past. The Mount-It! All-in-One studio dual mount is a fully-loaded streaming set that can hold two monitors, video camera, ring light and has an extendable mic arm, making you look and sound like the professional you are. Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position. The stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times..Studio dual mount is a fully loaded streaming set that can hold two monitors, one video camera, one ring light and has an extendable mic arm.Offers a dual-monitor mount, fits 17"-32" monitors.Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position.Made of sturdy, durable steel in black.Monitor tilt angle: +/-70 degrees; camera tilt angle: +/-90 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Each connecting bracket has an ergonomic handle, so you can easily position your devices how you like, even while you're streaming.Supported weight: two monitors up to 19.8 lbs. each; camera up to 15.4 lbs.; microphone up to 2.2 lbs.; light up to 15.4 lbs..Full arm extension: 15.7".Stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times.Supported by manufacturer's limited lifetime warranty

Lights, camera, action. No need for the DIY setups you've used in the past. The Mount-It! All-in-One studio single mount is a fully-loaded streaming set that can hold one monitor, video camera, ring light and has an extendable mic arm, making you look and sound like the professional you are. Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position. The stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times..Studio single mount is a fully loaded streaming set that can hold one monitor, video camera, ring light and has an extendable mic arm.Offers a single-monitor mount, fits 17"-32" monitors.Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position.Made of sturdy, durable steel in black.Monitor tilt angle: +/-70 degrees; camera tilt angle: +/-90 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Each connecting bracket has an ergonomic handle, so you can easily position your devices how you like, even while you're streaming.Supported weight: monitor up to 19.8 lbs.; camera up to 15.4 lbs.; microphone up to 2.2 lbs.; light up to 15.4 lbs..Full arm extension: 15.7".Stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times.Supported by manufacturer's limited lifetime warranty

Mount-It! MI-2789 triple arm (horizontal) monitor mount and stand allows you to clear out your desk space, while providing ergonomic monitor installation height. Say good bye to neck and should pain and increase your productivity with three screens. Heavy duty stand and pole design makes this three monitor mount sturdy. Economical and dependable, mechanical monitor arms allow several height options for placing your monitor in the best ergonomic position, while offering more desktop space. The double link swing arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. The arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. Articulating arms on the sides allow swivel function up to 360 degrees with 45 down and 80 up degrees of tilt at the mounting panel..TRIPLE MONITOR STAND: Fits 3 monitors 19-24 inches in size, with a maximum support weight of 15.4 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Measure, in millimeters, the distance between the bolt holes in the pattern on the back of your monitor if unsure of size..WELL-DESIGNED FEATURES: Free standing monitor desk stand has full motion, height adjustable arms and is made of heavy duty steel and have integrated cable management on each to keep your cables out of sight. VESA plates are removable, which makes for easier mounting. Comes with stable free standing base for desktops..FULLY ADJUSTABLE: 2 of 3 monitor stand outer arms can tilt 45 degrees up and down from center, swivel 360 degrees, and raise and lower on the middle pole. Middle screen can be height adjusted, tiled, and swiveled as well. All 3 screens can be placed and held in portrait or landscape orientation independent of one another. To align the height of the monitors, rotate the height adjustment screw behind each monitor VESA head to raise and lower each monitor up to 1 inch.EASY INSTALLATION: Triple monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Detachable VESA plates are mounted to the back of the monitors, and re-attached with a single bolt. Non-skid free stand sits atop any desktop. See instructional video for additional tips on functionality and assembly..Made from high grade steel and aluminum.Supported by manufacturer's limited lifetime warranty

MI-2789XL triple arm monitor mount and stand allows you to clear out your desk space, while providing ergonomic monitor installation height. Individual height adjustments for each arm perfectly align the position of your monitors. The heavy duty stand and pole design makes this three monitor mount extremely stable. The double link swing outer arms that support the monitors can be adjusted on the vertical tube for ideal height. Articulating arms on the sides allow swivel up to 360° with 45° down and 80° up the panels..Raise your monitor to a comfortable viewing height with this triple monitor stand.Each arm holds a flat-panel monitor up to 27" for versatile use.Maximum height adjustment: up to 17".Made of high-grade steel and aluminum.Outer arms can move up and down, tilt 45 degrees down and 90 degrees up from the center, swivel 360 degrees, and the middle mount moves up and down, tilts, and swivels as well.Holds three monitors weighing up to 22 lbs. each.Dimensions: 17"H x 58.5"W.VESA 100 x 100 and 75 x 75 compliant.Comes in black.Simple design with built-in cable management on each arm to keep your cables out of sight.Solid yet compact base provides stability and saves space.Base dimensions: 12.5"W x 13.4"D.Supported by manufacturer's limited lifetime warranty.Ergonomic and Space-Saving Triple Monitor Stand for Ultimate Efficiency!

The Kanto DTS1000 universal height adjustable desktop monitor stand is a companion to your monitor that improves ergonomics for increased productivity. This monitor stand is easy to deploy with its detachable monitor plate and offers easy height adjustment, swivel, tilt, and monitor rotation. Switch between portrait and landscape orientation with ease thanks to the 360° rotation. The monitor clicks into place as it's raised making it easy to position on-the-fly allowing you to place any monitor up to 32" at eye level. There is no mechanical or gas spring that can wear out, and the heavy-duty base holds the monitor steady all day. It's easy to set up with a cable guide to route cables for a tidier workspace. There's also a tool holder which makes adjusting the tilt and swivel tension a breeze..HEIGHT ADJUSTABLE – The height adjustable column clicks into place while raising your monitor to eye level for easy on-the-fly adjustments to improve ergonomics..MANEUVERABILITY – DTS1000 features tilt and swiveling to place your monitor in the most comfortable position and reduce glare. 360° monitor rotation allows you to rotate your monitor from landscape to portrait easily..HEAVY DUTY – A thick steel base holds your monitor securely in place even while adjusting your monitors height, protecting your investment and giving you peace of mind..EASY DEPLOYMENT - A detachable monitor plate allows for easy setup and takedown, saving you time and frustration..CABLE MANAGEMENT – Easily route cables and achieve a clean setup with the included cable guide that attaches to the column.

This sleek monitor desktop stand raises two displays off the desk surface, thus saving workspace and creating a productive display configuration to increase productivity. It is designed to mount two 13"-27" monitors in horizontal line and the weight capability for each one is 22 Ibs. It can rotate for 360°, which allows portrait and landscape viewing. It also allows smooth, effortless tilt motion for any direction, making it easy to reduce glare and find the perfect viewing angle. You can also adjust the monitor vertically to a desired position. It's quick and simple that allows the user to move the displays freely along the horizontal rail without using any tools..MI-1781 is compatible with most screens between 13" and 27".Height adjustable, articulating arms made of high strength steel.Load Capacity: 22 lbs. per monitor (44lbs total).Height adjustable through the sliding of the arms on the pole.Compatibility: 75mm x 75mm and 100mm x 100mm VESA patterns.Heavy duty weighted V-base for stable architecture.Tilt: Up or Down 15 degrees.Rotate: 360 degrees.Supported by manufacturer's limited lifetime warranty.The MI-1781 monitor arm mount helps you increase productivity and clear up extra space on your desk

The MI-4110 is a versatile TV or monitor wall mount that offers full motion capability to adjust your TV with ease. Tilt or swivel to reduce glare and find the perfect angle. Extend the mount up to 15" from the wall to enjoy a comfortable view from any seat, or retract to keep your TV close to the wall. The single stud installation makes installation a breeze. This sturdy mount holds screens up to 66 lbs..FULL MOTION TV WALL MOUNT: Articulating arms with adjustable 20 degrees tilt up and down; 180 degrees swivel left or right. Retracts to 3.5"; Extends up to 15.7" from the wall.HEAVY DUTY FLAT SCREEN BRACKET: High strength steel material offers loading capacity to 66 lbs (tested to 132 lbs)..UNIVERSAL VESA WALL MOUNT: Compatible with VESA 75x75mm (3"x3"), 100x100mm (4"x4"), 200x100 mm (8"x4"), 200x200mm (8"x8") without adapters, fits VESA 300x300 (12"x12"), 400x300mm (16"x12"), 400x400mm (16"x16") with 4 extra plate adapters.COMPATIBILITY: Fits SAMSUNG, SONY, LG, VIZIO, TCL, ELEMENT, SCEPTRE, HISENSE and other TV brands between 23 and 55 Inch Screen Sizes.LARGE MONITOR WALL MOUNT: Works with larger 32, 34, 35 inch ultrawide monitors. Use it as a full motion monitor wall mount to save desktop space and for ergonomic computer screen installation. PLEASE ENSURE THE BACK OF YOUR MONITOR CAN FIT 8X8 INCH MOUNTING PLATE. SOME MONITORS MIGHT ONLY HAVE A 4X4 OPENING.Supported by manufacturer's limited lifetime warranty

Create a more ergonomic environment by adding this monitor and laptop mount into your office space. The Mount-It! full-motion swiveling arm mount significantly increases the functionality of your devices and displays. Having two screens available will help increase productivity since you won't need to switch back and forth between applications. The laptop mount features a cooling fan that will prevent the laptop from overheating. The laptop mount supports screens up to 15", and the monitor mount fits screens from 13" to 27". Cluttered desks, eye straining, back and neck pain, sun glare, and overheating will be a distant memory thanks to this mounting stand..Full-motion swiveling arm mount for laptops and monitors helps you create an ergonomic office environment.Comes in gray with black accents.Built-in cooling fan keeps your laptop cool and prevents overheating.Fits screens up to 15" and monitors from 13" to 27".Quick-release function allows you to easily attach and remove your monitor.In-arm cable routing and pole clip allow for a neat workplace.Each arm features a 19.8 lb. capacity.VESA compatibility: 75 x 75mm, 100 x 100mm.Can be mounted on 0.8"-2.3" thick desktops.Supported by manufacturer's limited lifetime warranty

The Mount-It! triple monitor stand is used by professional-level gamers, industry-known videographers and filmmakers, digital entrepreneurs, and top employees at home or in the office. This mount features 360-degree rotary VESA plates with a built-in free tilt design. This means you can position your one, two, or three monitors flush together or spaced out and tilt them upward or downward to reduce strain on your neck. The mount includes integrated cable management channels in each arm and keeps AV and power cords organized..This triple monitor stand is used by professional-level gamers, industry-known videographers and filmmakers, and top employees at home or in the office.Fits 17" to 27" monitors.Comes in black.Tilt angle: +/-45 degrees; swivel: +/-180 degrees.Dimensions: 18"H x 54.5"W.Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Holds three display screens with maximum weight of 15.4 lb. per arm.Cable management included to hide unwanted cables.Supported by manufacturer's limited lifetime warranty