Swivel Dual Monitor Stands

Dual Monitor Stand - Ergonomic Free Standing Dual Monitor Desktop Stand for two 24" VESA Mount Displays - Synchronized Height Adjustable - Double Monitor Pole Mount - Silver (ARMDUOSS).DUAL 24 INCH MONITOR MOUNT: VESA 75x75/100x100mm compatible heavy duty freestanding dual monitor desktop stand supports two displays up to 24" (18lb/8kg) per screen; Features a stylish silver finish.HEIGHT ADJUSTABLE CROSSBAR DESIGN: Secure 2 monitors along the 25.2" horizontal crossbar w/ swivel & height adjustment (by hand w/ the lever) along the 15.9" (404mm) pole.ORGANIZED WORKSPACE: Double monitor universal VESA mount for computer/PC with cable management clips along the silver arms & center pole to organize cables for a tidy setup.STABLE & NON-SLIP: Aluminum free standing monitor mount w/ low profile base (10.9" (278mm) x 17.7" (450mm)) for max stability & flexible placement; Anti-slip rubber pads prevent scratches on surfaces.WIDE RANGE OF MOTION: Ergonomic monitor positioning w/ ball joint design for ideal viewing angles | +/-15° tilt/swivel & 360° rotation (portrait/landscape); Align monitors w/ micro height adjustment.Comes in silver/black.5-year manufacturer limited warranty.Dual Monitor Mount | Low-Profile Base | Steel & Aluminum | For up to 24" Monitors

Arrange a keyboard, work surface, and two screens to create an ergonomic workstation with this dual-arm stand, which can easily lift monitors up to 20 inches off the desktop. The arms of this Ergotron WorkFit-A dual monitor stand can be used to swivel the whole workstation to either side and to keep screens out of the way when they are not in use..This dual monitor stand with tray and worksurface clamps to the rear or side of most surfaces and enables an effortless sit-and-stand work style.Supports up to 24" monitors for versatile use.Lift range: monitors and keyboard tray adjust 20" in tandem, monitor adjusts 5" independently.Durable, easy-to-clean exterior composed of aluminum, high-grade plastic, and powder-coated painted steel.180-degree pan, 360-degree rotation, and 30-degree tilt adjustment options enable for optimal viewing.Includes a worksurface for additional space and a keyboard tray with three tilt positions that sits below the desktop height for the best ergonomic positioning.Each arm securely holds up to 10 lbs. to fit most monitors (25 lbs. total load on height-adjustment assembly).Overall dimensions: 45.25"H x 28.8"W x 43.7"D (fully extended).Compatible with standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black/polished aluminum finish completes overall aesthetic appeal.Easily clamps to the front of any surface 0.78–2.6" thick.5-year manufacturer limited warranty.Customize screen viewing for sitting or standing work with this Ergotron WorkFit-A dual monitor stand.

Customize your workstation, and free up space, with this dual-monitor stand. Mount two monitors on the dual articulating monitor arms, and adjust your displays for optimum viewing with a wide range of motion. The free-standing base gives you flexibility in placing your setup within your workspace. Work more efficiently with a dual-monitor setup. The horizontal dual-monitor stand lets you mount two VESA mount (75x75, 100x100 mm) monitors, up to 32", with a maximum weight capacity of up to 17.6 lb./8 kg per display. Mounting your displays on a dual-monitor stand above the desk surface enables you to adjust your display height, position and viewing angles for an ergonomic workspace. The swiveling arms provide maximum viewing flexibility, letting you work in comfort. It's easy to customize your setup, placing your monitors at the ideal height. Simply adjust the display height along the 16.7" (42.4 cm) pole. You can align your monitors perfectly with the micro-adjustment feature. Extend the dual articulating arms up to 18.4" (46.8 cm) to position your monitors in the ideal position. Tilt your monitors +90/-40 degrees and swivel +90/-90 degrees for ideal viewing. Rotate your displays for portrait or landscape viewing. Neatly route your cables, keeping them organized and out of view, with the cable-management channels..Raise your monitor to a comfortable viewing height with this monitor stand.Supports up to 32" monitors for versatile use.Made of aluminum.-40 to 90-degree tilt, -40 to 90-degree pan, and -40 to 90-degree rotation adjustment options enable optimal viewing.Weighs 10.6 lbs..Dimensions: 21.65"H x 36.46"W x 4.57"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black/silver.5-year manufacturer limited warranty

Pair the 3M Dual Monitor Mount MM200B with 3M Precision Standing Desks for comfort and productivity!.The 3M Dual Monitor Mount frees up valuable desk space and bring your monitor to a comfortable viewing height and distance while sitting or standing.Sturdy steel construction holds two monitors up to 28.5” W and 20 lbs. each, Black.Dimensions: 24 in H x 33 in W x 5 in D.Fully adjustable: set height on 15" pole, rotation portrait to landscape) 360°, tilt (forward/back) +45° to -45°, pan (left/right): +90° to -90° and arm swivel (front to back): 90°..Easily clamp mounts to surfaces up to 3.25” thick, no tools needed (grommet mount also available).Weight 9.9 lbs..VESA Compatible: 75x75mm and 100x100mm.Pair with 3M Precision Standing Desks for Comfort and Productivity

Transform a working surface into an adjustable sit-and-stand workstation using this stand. The keyboard tray offers two tilt positions, so it's easy to find the ideal height for comfortable use behind a monitor. This Ergotron sit-and-stand ergonomic stand supports up to 25 pounds, making it an ideal choice for two 24-inch monitors, and it has 360-degree rotation for quick screen adjustments..This sit-and-stand easy-to-use dual monitor stand with a tray allows you to instantly raise or lower your keyboard and two displays in one simple motion, keeping your system stable as you work.Supports up to 24" monitors for versatile use.Lift range: monitors and keyboard tray adjust 18" in tandem, monitor adjusts 4.8" independently, 22.8'' maximum monitor height adjustment.Durable, easy-to-clean exterior composed of aluminum, high-grade plastic, and powder-coated painted steel.A 360 degree rotation allows monitors to be oriented vertically or horizontally.Includes a worksurface for additional space and a keyboard tray with two tilt positions that sits below the desktop height for the best ergonomic positioning.Each arm securely holds up to 12 lbs. to fit most monitors (25 lbs. total load on height-adjustment assembly).Overall dimensions: 43.5"H x 28"W x 30.2"D (fully extended).Compatible with standard VESA mounting patterns: 75 x 75, 100 x 100.Meets VESA FDMI MIS-D mounting standard.Black finish completes overall aesthetic appeal.Easily clamps to the front of any surface 0.47–2.4" thick.5-year manufacturer limited warranty.Complete Manufacturer Specifications.Perform computing tasks efficiently in comfort with this Ergotron WorkFit-S dual monitor stand.

The FlexiSpot D1D-E mount was designed specifically for use with all FlexiSpot sit-to-stand desk risers. Each riser has a small grommet hole on the top surface to attach the mount. The D1D-E includes a bolt and a low profile bracket for securing tightly through the grommet hole. The D1D-E also includes a heavy duty C-clamp for attaching to a standard desktop so you can standardize your office design with a single mount for either risers or desks..Dual monitor mount with low profile grommet attachment hardware and C-clamp attachment hardware.For monitors up to 30".Minimum height 7.9" to maximum height 15.7".Mount is black powder-coated steel.180 degree swivel, 15 degree tilt, 360 degree rotation.Dual monitor mount for FlexiSpot sit-to-stand risers

Experience the productivity benefits of using two displays: two LCD monitors or pair an LCD with laptop by purchasing the laptop tray attachment..Save valuable desk space and easily move your monitor to a comfortable height for viewing reducing eye, back and neck strain..Made from aluminum alloy and metal materials holds monitors up to 20 lbs. and ≤27"..Highly adjustable arm moves smoothly up and down through 10.6 in height adjustment range with just a touch..Experience the productivity benefits of using two displays: two LCD monitors or pair an LCD with laptop by purchasing the laptop tray attachment..Arm moves in and out and side to side with ease so you can move your monitor out of the way when not in use or share your screen with others..Easy to install comes with both clamp and grommet hardware included..Internal cable management route cables neatly under arm..VESA MIS-D 75x75/100x100mm compliant monitors Up to 20 lbs. and <= 27 in.5 Year Warranty.Free up space on your desk and easily move dual monitors into a comfortable height for viewing.

View data clearly and reclaim desk space with this stand, which supports two monitors up to 24 inches and 31 pounds. This Ergotron horizontal dual monitor desk stand can be used to rotate monitors between portrait and landscape views to better suit any task..Raise your monitor to a comfortable viewing height with this monitor stand.Supports up to 24" monitors for versatile use.Made of steel.360-degree rotation allows monitors to be oriented vertically or horizontally.Securely holds up to 62 lbs. to fit a wide range of monitors.Compatible with the standard VESA mounting patterns: 100 x 100, 75 x 75.Comes in black finish.5-year manufacturer limited warranty.Multitask in comfort by using this Ergotron horizontal dual monitor desk stand.

Ramp up ergonomic comfort for a great price. The Neo-Flex Dual Monitor Stand lets you instantly set the height of your screens for a more comfortable view. With a light touch, raise or lower screens through a 5" (13 cm) height range. Rollers in the base support easy screen sharing, while 360° rotation creates personalized viewing angles..Supports two screens up to 24" and up to 34 lbs (15.4 kg).Offers 5" (13 cm) of height adjustment.Positions monitor up and down for your ideal height.Pan, tilt or rotate your screen as you work.Frees up your desktop to increase workspace.Work on or reference multiple documents at once.Weight (lbs.): 15.8.Mount Bracket or VESA Pattern: MIS-D

Save space by wall-mounting your monitor, and maximize viewing with the swiveling extension arm. Wall-mount your computer monitor or flat-screen TV to free up space on your desk or table. This wall-mount monitor arm supports flat-panel displays up to 27" and provides a full 15" (382 mm) arm extension for optimum screen adjustment. The pivoting arm swivels +90° / - 90°, plus tilts and rotates to provide maximum viewing flexibility. Save space by wall-mounting your flat-panel display. This monitor arm helps you save space on your desk or table surface, by letting you securely wall-mount a computer monitor or LED / LCD TV from 13" to 27" (330 to 686 mm) in size and up to 33 lb. (15kg) in weight. It's ideal for many different applications, including business, healthcare or financial settings, where you may want to share your screen with patients, clients, or other visitors. The wall-mount monitor arm also works well in office settings or workspaces that back against a wall. Adjust your screen position with ease. The monitor arm extends a full 15" (381 mm) making it easy to change your screen position, so you can work more comfortably or share your screen with others. The dual-swivel arm offers a full +90° / - 90° swivel, to move your screen easily to the left or right and share your screen with maximum viewing flexibility. It tilts freely +70° / - 70°, allowing easy angle adjustment up or down to share your display, while collaborating with team members. Easy installation. The aluminum wall-mount monitor arm features slide-in wall plate construction for easy installation. To help keep your work area free of clutter, the monitor arm also features a cable clip that keep your cables neatly out of sight. The ARMWALLDS is backed by a StarTech.com 2-year warranty and free lifetime technical support..Mount your monitor or flat-screen TV on a wall to save space and easily share your screen.Supports a 13'' - 27'' monitor up to 33 lb. (15kg).Arm extends a full 15" (382 mm).Made of aluminum.Tilt, Swivel, and Pan functions enable adjustments for comfortable viewing.Dimensions: 4.7"H x 21.65"W x 4.9"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

Planar's dual monitor stand maximizes the benefits of two monitors by making it easier to toggle between applications with the seamless display setup. The stand helps to organize displays cables with a cable organizer, and can tilt, swivel, rotate, and height adjust..Up to 66 lb..Up to 24" LCD Monitor.Black.Desk-mountable

Silver Finish.Arms have 65° rotation at base with optional 130° and 360° rotations..Arms extend 22′′ and retract up to 3′′..Monitor can be rotated from landscape to portrait position

This vertical dual-monitor stand, with its sleek aluminum design, raises two displays off the surface of your desk or table, to save space while increasing your productivity. With its robust construction, the freestanding dual-monitor mount securely holds two VESA mount monitors, each up to 27", stacked vertically. Configure Your Displays to Enhance Productivity: The dual-monitor mount holds two displays, one above the other. You can adjust the height of the monitors along the 28" (710 mm) pole, to work in comfort with your two-monitor setup. Adjust Your Screens to the Ideal Position: The adjustable monitor stand for desks enables smooth, effortless +15/-15 degree tilt and swivel, making it easy to find the perfect viewing angle. It can also rotate a full 360 degrees, giving you the flexibility of portrait or landscape viewing. Durable Aluminum Design: The dual-monitor stand securely holds your monitors in place while complimenting your office decor with its black and silver aluminum design. The monitor stand supports two monitors, each up to 27" (686 mm) in size and 17.6 lb. (8 kg) in weight. Easy to Install: The VESA monitor stand is easy to install, featuring quick monitor attachment and removal. It also provides cable management to keep your cables neatly out of sight. ARMDUOVS is backed by a StarTech.com 5-year warranty and free lifetime technical support..Vertical dual-monitor stand supports two displays up to 27" each (max weight 17.6 lb. (8 kg) per monitor).The height of the monitors can be adjusted along the 28" (710 mm) pole.Adjust your screen angle easily with +15°/-15° tilt and +15°/-15° swivel.View your screen in portrait or landscape position with full 360° rotation.Cable management keeps cables neatly out of sight

SIIG's Articulated Freestanding Dual Monitor Desk Stand - 13"- 27" enables you to mount two flat panel monitors to instantly achieve an ergonomic working environment. It supports two flat panel monitors from 13" to 27" with weight up to 17lbs each. Durable steel articulating folding arms allow user to adjust the monitors to desirable positions for optimal viewing comfort. And it also comes with clip-on cable guides to keep cables organized and protected. This high quality freestanding monitor desk stand can be freely placed and relocated without being locked in a fixed area. It is an ergonomic and versatile monitor desk stand to free up desk space, improve viewing comfort and increase productivity..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Supports up to 27" monitors for versatile use.Made of steel.-45 to 45-degree tilt, -45 to 45-degree pan, and -45 to 45-degree rotation adjustment options enable optimal viewing.Weighs 10.8 lbs..Dimensions: 18.3"H x 28.46"W x 12.4"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.5-year manufacturer limited warranty

The VESA-compliant DDR1327SDD Dual Flat-Screen Monitor Desktop Mount Stand mounts two flat-screen monitors on a sturdy base, allowing you to free up valuable workspace on your desk, table or workstation. Recommended for home or office, the DDR1327SDD fits most flat-panel displays from 13 to 27 inches. Position your monitors with one-touch ease to optimize viewing angle and height to fit your environment and comfort level. A 180 swivel and -45 to +45 tilt capability minimizes glare and provides comfortable viewing from multiple angles. A 360 rotation lets you view your monitors in portrait or landscape orientation. Each VESA mount supports up to 26 pounds. The durable steel frame with scratch-resistant powder-coated finish tolerates frequent handling and blends with any decor. Mounting hardware is included. Conforms to VESA-compliant displays with either of the following mounting hole patterns: 75 x 75 mm and 100 x 100 mm. Features: Mounts 2 Flat-Screen Monitors on a Sturdy Base : Fits most flat-panel TVs, monitors and other displays from 13 to 27 in. Frees up valuable workspace on your desk, table or workstation. Mounting arms adjust independently for viewing angle. Ideal for home or office use. Convenient One-Touch Adjustment : 180 swivel and -45 to +45 tilt capability provide comfortable viewing. Full 360 rotation for viewing in portrait or landscape orientation. Durable Steel Construction : Each mount supports up to 26 lb. Scratch-resistant powder-coated finish blends with any decor. Mounting hardware included. VESA Compliance : Supports the following VESA mounting hole patterns: 75 x 75 mm and 100 x 100 mm. Package Includes: Pole. Base. (2) Mounting arms. Locking head assembly. Pole cable guide. Base collar. (2) VESA plate assemblies. (2) Arm cable guides. (2) End caps. (8) Washers. (18) Screws. Hex key, 3 mm. Hex key, 4 mm. Hex key, 6 mm. Owner's manual..Fits most flat-panel displays from 13 to 27 in..One-touch adjustment for comfortable viewing.Full 360° rotation for viewing in portrait or landscape orientation.180° swivel and -45° to +45° tilt capability provide comfortable viewing.Scratch-resistant powder-coated finish blends with any décor.Supports the following VESA mounting hole patterns: 75 x 75 mm, 75 x 100 mm, 100 x 75 mm and 100 x 100 mm.Each mount supports up to 26 lbs (11.8 kgs).Mounting hardware included.Dimensions (hwd / in.): 18.11" x 31.69" x 10".Dual-Monitor Desktop Mount Stand for 13" to 27" Flat-Screen Displays

This dual monitor arm desk mount enables you to mount two monitors up to 32". The arms are separately attached and stacked to the pole and are easily adjustable for horizontal or vertical monitor positioning. Its solid steel construction makes this monitor arm able to support 17.6lbs (8kg) each with two included mounting options (C-Clamp or Grommet mount) to securely attach your monitors to your desk..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use and has double arms.Comes in black and made of aluminum.-90 to 90 degree tilt and -90 to 90-degree rotation adjustment options enable optimal viewing.Two bays organize essentials such as pens, clips, etc..Weighs 13.45 lbs..Dimensions: 5.7"H x 33.86"W x 22.13"D.Compatible with: VESA 100 x 100mm mounting patterns.Rubber feet protect desk surface.5-year manufacturer limited warranty

This adjustable monitor arm allows for several height options for placing your monitor in the best ergonomic position, while offering more desk space. This highly adjustable monitor arm moves up, down, forward and back..Dual-swivel arm allows for easy adjustment of monitor tilt, rotation and viewing distance..Clamp and grommet mount hardware fits desks up to 2.36" thick..Provides 7 ½" of pole height adjustability, 18 ½" height adjustability from the surface and extends 19 ½" from the base..For monitors up to 30 lbs. and ≤27"..VESA MIS-D Compliant.3 year warranty.Monitor arms allow several height options for placing your monitor in the best ergonomic position

SIIG's Easy-Adjust Dual Monitor Desk Stand enables you to mount two monitors side-by-side to instantly create an ergonomic working environment. The premium quality aluminum mounting arms are built to last and easily support two monitors from 13" to 27" (measured diagonally) with weights up to 17.6 lbs. each. A unique mounting bracket with detachable VESA plate is smartly designed to simplify the installation procedure and makes mounting the monitors to your desired position quick and manageable. User-friendly adjustment knobs are integrated to allow horizontal and vertical adjustments for maximum viewing comfort. The heavy-duty counter-balanced base ensures stability and allows easy re-positioning around the desktop. Clip-on cable guides keep cables and wires neat and organized. This high-quality, easy-to-use dual monitor desk stand is a great workspace organizing tool to provide ergonomic comfort, free up desk space, and increase productivity..Fits 13" to 27" Monitors: Accommodates dual monitors ranging from 13 to 27 inches, supporting up to 17.6 lbs. each.Ergonomic Design: Enhances your workspace with side-by-side monitor setup for improved comfort and productivity..Flexible Adjustment: Allows +/- 15° tilt and 360° rotation for optimal viewing angles in portrait or landscape orientation..Premium Quality Aluminum: Durable mounting arms ensure long-lasting support and stability..Detachable VESA Plates: Simplifies installation with removable VESA plates compatible with 75x75mm and 100x100mm mounting patterns..Cable Management: Integrated clip-on cable guides keep your workspace tidy and organized..Heavy-Duty Base: Counter-balanced base provides stability and easy repositioning around the desktop..User-Friendly Adjustment Knobs: Quick and easy horizontal and vertical monitor positioning for maximum viewing comfort.

This sleek monitor desktop stand raises two displays off the desk surface, thus saving workspace and creating a productive display configuration to increase productivity. It is designed to mount two 13"-27" monitors in horizontal line and the weight capability for each one is 22 Ibs. It can rotate for 360°, which allows portrait and landscape viewing. It also allows smooth, effortless tilt motion for any direction, making it easy to reduce glare and find the perfect viewing angle. You can also adjust the monitor vertically to a desired position. It's quick and simple that allows the user to move the displays freely along the horizontal rail without using any tools..MI-1781 is compatible with most screens between 13" and 27".Height adjustable, articulating arms made of high strength steel.Load Capacity: 22 lbs. per monitor (44lbs total).Height adjustable through the sliding of the arms on the pole.Compatibility: 75mm x 75mm and 100mm x 100mm VESA patterns.Heavy duty weighted V-base for stable architecture.Tilt: Up or Down 15 degrees.Rotate: 360 degrees.Height adjustable up to 16 inches..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.The MI-1781 monitor arm mount helps you increase productivity and clear up extra space on your desk

Mount-It! Dual Monitor Stand (MI-2781B) allows you to adjust two monitors to the optimal viewing height, clearing desk space and enabling the most comfortable work place experience..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 17.6 lbs per arm for a total capacity of 35.2 lbs.FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 80 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 15.5" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 19" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Quick Installation and Superior Screen Positioning with MI-2781B Dual Mount for Enhanced Productivity and Comfort

This sleek, modern dual monitor desk stand is a great addition to any office environment. With a unique v-shaped base and heavy duty construction, MI-792 is stable and reliable. Each arm can support up to 22 pounds, and screen sizes up to 27" with 75mm x 75mm or 100mm x 100mm VESA patterns. Once mounted, displays can tilt 15° and rotate 360° for landscape or portrait monitor orientation. A cost-effective monitor stand that is easy to set up, saves space, and looks great..Fits two monitors from 13" to 27", with a maximum support weight of 22 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors..Two monitor mount arms can tilt up and down 15 degrees, swivel left-right 360 degrees, raise and lower 17" inches on the pole, and each screen can be rotated and placed in portrait or landscape orientation independent of one another..Double monitor mount has full motion, height adjustable articulating arms and are made of heavy duty steel, and have integrated cable management clips on each to keep your cables organized. Comes with both interchangeable free standing and grommet bases..2 monitor desk stand comes with all mounting hardware, tools, and instructions necessary for assembly..Black finish completes overall aesthetic appeal.V-shaped base is certain to keep your mount from shaking, wobbling, or toppling over, while it still can be bolted directly to the desk through a suitable grommet hole.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Mount two adjustable monitors at one desk with this Mount-It! dual-monitor desk stand.

This desk mount dual-monitor arm lets you mount two 13" to 27" VESA mount monitors, each weighing up to 17.6 lb. (8 kg), onto a single low-profile base. It gives you flexible desk-clamp or grommet-hole mounting, letting you save space while creating an ergonomic workspace in any office environment. Free Up Desk Space­: With a stable dual-arm design, the double-monitor mount lets you create more usable work space by mounting your monitors side by side on a single base. The screen mount features a flat low-profile back that lets you position your displays against a wall or cubicle wall. Optimal Viewing: The computer monitor desk mount features adjustable height along the pole. The smooth +/- 30° tilt motion and +/- 30° swivel make it easy to find the optimal viewing angle. You can also rotate your display 360° for portrait or landscape viewing, and make sure your displays are perfectly aligned using the micro-adjustment knob. Flexible Installation: The dual-monitor arm is easy to install, with the desk-clamp or grommet mount (hardware included). Integrated cable management keeps your workspace organized. It works well with most desks, including sit-stand workstations. Boost Productivity with Multiple Monitors: Adding two monitors gives you the extra screen space you need to simplify multitasking and maximize your productivity. ARMBARDUOG is backed by a 3-year StarTech warranty and free lifetime technical support..Save space by mounting two monitors up to 27" onto a single base (max. weight 17.6 lb. / 8 kg).Keep monitors aligned with micro-adjustment.Work comfortably with adjustable height, +/- 30°tilt, +/- 30°swivel and 360° rotation.Versatile use with desk-clamp or grommet-hole mounting.Place monitors close to a wall/cubicle wall, with a low-profile design

Mount two monitors side by side for easy viewing with this SIIG articulating dual-monitor desk mount, which provides 360-degree rotation and swivel for each display. Its full-motion desk-mounted design preserves valuable desktop space for external peripherals and files, and its +/- 45-degree tilt angles allow personalized positioning of your displays..Articulating/full-motion desktop mount for two monitors from 13 - 27".Compatible with VESA mounting 75 x 75 mm and 100 x 100 mm patterns.Weight capacity: 22 lbs..Supports tilt angles of +/-15 deg, 360 deg swivel, 360 deg rotation for easy adjustment of viewing angle.Dual section mounting arm that extends up to 16 1/2" & allows height adjustment up to 18" for proper monitor positioning.Supports portrait or landscape monitor orientations.Installs quickly and easily on to any desk or table.Heavy-duty "C"-clamp is compatible with all table and desk surfaces from 1/2 - 4" in thickness.Integrated cable management keeps cables neat, organized and out of the way.Gets monitors out of the way & frees up valuable desk workspace.Includes: Installation guide and mounting hardware kit.Weight: 10.6 lbs..5 years limited mfr. warranty.SIIG Articulating Dual-Monitor Desk Mount - Personalized Viewing Angles

Maximize the space available on desks by using this mounting arm for flat-screen monitors. This Ergotron mounting arm lifts screens off desk surfaces and frees up space for supplies or documents to be stored..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 27" monitors for versatile use.Lets you easily adjust height up to 13".Made of aluminum for durability.75-degree tilt, 360-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Securely holds up to 40 lbs. to fit most monitors.Compatible with the standard VESA mounting patterns: 100 x 100mm and 75 x 75mm.Comes in black finish.10-year manufacturer limited warranty.Work on more than one computer screen at a time with this Ergotron LX Dual Side-by-Side arm for flat screen monitors.

Maximize your screen space with the SIIG Freestanding Adjustable Vertical Dual Monitor Steel Stand, designed to support two monitors up to 32 inches. Featuring independent height adjustment, tilt, swivel, and 360° rotation, this stand provides customizable ergonomic positioning for improved comfort and efficiency. The durable steel construction ensures stability and long-term reliability, while the freestanding base offers a secure setup without drilling or clamps. With detachable VESA plates for easy installation and integrated cable management, this sleek black stand keeps your workspace organized and clutter-free..Raise your monitor to a comfortable viewing height with this monitor stand.Supports up to 32" monitors for versatile use.Comes in black and made of steel.-35 to 35 degree tilt and 360-degree rotation adjustment options enable optimal viewing.Two bays organize essentials such as pens, clips, etc..Weighs 11.9 lbs..Dimensions: 31.7"H x 19.25"W x 13.07"D.Compatible with: VESA 100 x 100mm mounting patterns.Rubber feet protect desk surface.2-year manufacturer limited warranty

SIIG's Easy-Adjust Dual Monitor Desk Stand enables you to mount two monitors side-by-side to instantly create an ergonomic working environment. The premium quality aluminum mounting arms are built to last and easily support two monitors from 13" to 27" (measured diagonally) with weights up to 17.6 lbs. each. A unique mounting bracket with detachable VESA plate is smartly designed to simplify the installation procedure and makes mounting the monitors to your desired position quick and manageable. User-friendly adjustment knobs are integrated to allow horizontal and vertical adjustments for maximum viewing comfort. The heavy-duty counter-balanced base ensures stability and allows easy re-positioning around the desktop. Clip-on cable guides keep cables and wires neat and organized. This high-quality, easy-to-use dual monitor desk stand is a great workspace organizing tool to provide ergonomic comfort, free up desk space, and increase productivity..Fits 13" to 27" Monitors: Accommodates dual monitors ranging from 13 to 27 inches, supporting up to 17.6 lbs. each.Ergonomic Design: Enhances your workspace with side-by-side monitor setup for improved comfort and productivity..Premium Quality Aluminum: Durable mounting arms ensure long-lasting support and stability..Flexible Adjustment: Allows +/- 15° tilt and 360° rotation for optimal viewing angles in portrait or landscape orientation..Detachable VESA Plates: Simplifies installation with removable VESA plates compatible with 75x75mm and 100x100mm mounting patterns..Cable Management: Integrated clip-on cable guides keep your workspace tidy and organized..Heavy-Duty Base: Counter-balanced base provides stability and easy repositioning around the desktop..User-Friendly Adjustment Knobs: Quick and easy horizontal and vertical monitor positioning for maximum viewing comfort..Premium side-by-side dual monitor desk stand conserves valuable desk space, Fits 13" to 27" monitor, Max Load 17.6 lbs., VESA 75x75mm or 100x100mm, Cable Management, Flexible Adjustment

MI-7904 is affordable solution for working while sitting or standing without having to buy an entirely new desk. Designed to simply clamp to your existing workstation, MI-7904 gives you various placement options for convenient use of two monitors and your laptop, notebook and keyboard. Gas spring-assisted lift mechanism that allows you to raise and lower it almost effortlessly in just seconds..This full motion, sit stand workstation allows to work standing up or sitting down with the height adjustable arm that can travel 19.5" up or down..The dual monitor bracket fits monitors from 20" up to 27" with standard VESA patterns 75x75 and 100x100, and each VESA head supports 13.2 lbs. per monitor..A versatile attachment base can be converted to a c-clamp or grommet base that attaches to any desk or table edge up to 3.1" thick in just a few minutes..The monitor bracket tilts +/- 15 degrees and rotates +/- 180 degrees, while the spring arm swivels +/-90 degrees and is height adjustable by 19.5"..Features a 26.2" L x 10.2" D keyboard that conveniently folds away, and the station also includes an organizer tray and built-in cable management ducts..Supports VESA Patterns: 75x75mm and 100x100mm.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Monitor and Desk Mount specialist Mount-It! will change the way you work! No need to buy a complete sit-stand desk. This height-adjustable desk mount clamps to the edge of your existing desk and allows you to work comfortably from either a sitting or standing position.

The VFS-DH freestanding desk mount is an ideal accessory for any dual or single monitor application. Both monitors can be independently adjusted up to 20 degrees in any direction and rotated between landscape and portrait orientations. The unique QuickShift lever provides independent horizontal adjustment without the need for a single tool. An elegant design with a footprint of 16.61”x12” leaves your desk clear of clutter. The freestanding base provides flexibility to be located anywhere on the desk. This mount can be converted into a single display configuration by attaching one of the VESA heads directly onto the vertical post..Dual or single monitor freestanding desk mount.Ideal for displays up to 26.5 lbs..Independent horizontal adjustment.Built from lightweight and durable anodized aluminum. Color: silver.Tilt adjustment of 20 degrees in any direction, pan adjustment of 20 degrees in any direction. Supports landscape to portrait screen rotation..12.8 lbs..Package dimensions: 20.30" x 13.40" x 4.30".VESA 75x75 to 100x100

Free up more work space by using this monitor arm with two USB ports to bring your flat screen monitor to eye level and off your desk. It displays and moves a screen with a single mount. Easily tilt each monitor up and down or swivel it to position them wherever you desire. Monitor tilt ranges from 15 degrees to negative 85 degrees. Two USB ports provide a convenient way to stay connected to your data. Enclosed cable management presents a clean appearance. Install with grommet or desktop mounting. Arm is made of high-quality aluminum alloy. Its maximum extension is 21-. VESA compatibility is 75mm and 100mm..Single mount with dual monitor arms.Can withstand 17.6 pounds per arm.Height adjust to 17 inches tall.Made of high quality aluminum alloy material.12.83"H x 5.75"W x 15.83"D.Two USB ports provide access to power and data.Holds two flat screen monitors with one arm.Model Option: HBDMAUSB

Save workspace and increase productivity by mounting two monitors, stacked, above your desk. This sturdy and sleek dual-monitor mount raises two displays off the surface of your desk or table, to save space while increasing your productivity. With its steel construction, the dual-monitor mount attaches easily to your desk or table to securely hold two monitors, each up to 27", stacked vertically. Configure your displays to enhance productivity. The dual-monitor mount holds two displays, one above the other, in a vertical configuration. The height of the monitors can be adjusted, as required, along the 27.5" (700 mm) pole. With the dual-monitor mount, you can work more comfortably, reducing neck and eye strain without having to look side to side when comparing files or reviewing reference material on your screens. It's ideal for numerous applications including web design, coding, creating and reviewing files, and many others. The monitor mount saves valuable desk space and lets you work clutter-free, which is a welcome addition in numerous office environments including business, healthcare, and financial settings. Adjust your screens to the ideal position. The monitor mount enables smooth, effortless +45°/-45° tilt and +45°/-45° swivel, making it easy to reduce glare and find the perfect viewing angle. It can also rotate a full 360° giving you flexible viewing options. Rugged steel design. The heavy-duty steel monitor mount holds your two monitors securely in place to protect your investment, and provide long-lasting performance. The dual-monitor mount supports two displays 13" to 27" (330 to 686 mm) in size and 22.1 lb. (10 kg) in weight per monitor. The surface finish features a powder coating to help resist scratches. Easy installation. The dual-monitor mount makes it easy to mount your VESA mount compatible displays above your desk, table or other surfaces, using the included C-clamp or grommet mount. For easier mounting, the VESA mount features notches that let you pre-set the mounting screw, then slide the monitor into place and tighten the screw. To help keep your work area free of clutter, the monitor mount also features cable clips that keep your cables neatly out of sight. The ARMDUALV is backed by a StarTech.com 2-year warranty and free lifetime technical support..Mount two monitors vertically to save space and increase your comfort.Desktop monitor mount supports two displays up to 27" (686 mm) in size and 22.1 lb. (10 kg) in weight per monitor.Heavy-duty steel construction.Made of steel.-45 to 45-degree tilt, -45 to 45-degree pan, and -45 to 45-degree rotation adjustment options enable optimal viewing.Dimensions: 35.43"H x 4.57"W x 4.7"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

Transform your workstation into a high-performance productivity hub with the WorkFit Support Bundle. This all-in-one ergonomic and connectivity solution includes top-tier components from trusted brands like Ergotron and StarTech. Whether you're upgrading a home office or outfitting a corporate desk, this kit delivers seamless monitor mounting, cable management, and sit-stand flexibility to support healthier work habits and efficient device integration..Ergotron WorkFit-TL Adjustable Standing Desk Converter (Model: 33-406-085) – 37.5" wide riser with 15" lift for sit-stand flexibility and ergonomic comfort..Ergotron LX Dual Side-by-Side Monitor Arm (Model: 45-245-026) – Supports two monitors up to 27" with full-motion articulation and VESA compatibility..StarTech 15 ft. USB 2.0 A to B Cable (Model: USB2HAB15) – High-speed cable for connecting printers, scanners, and other USB-B devices..StarTech 6.56 ft. Stereo Audio Cable (Model: MU2MMFS) – Male-to-male 3.5mm cable for clear stereo audio between devices..StarTech 6 ft. USB-A Male to Female Extension Cable (Model: USBEXTAA6BK) – Extends USB device reach with durable shielding and strain relief..Ergotron LX Adjustable Monitor Mount (Model: 98-017) – Single monitor mount with sleek zinc-plated finish and flexible positioning..StarTech 10 ft. DisplayPort Cable with Latches (Model: DISPLPORT10L) – Secure, high-resolution video and audio transmission for DisplayPort-enabled devices..StarTech 15 ft. NEMA5-15P to IEC-60320-C13 Power Cord (Model: PXT10115) – Heavy-duty power cord for reliable connection to monitors and desktop PCs..WorkFit Support Bundle – Optimize Your Workspace for Comfort, Connectivity & Productivity

The StarTech.com dual monitor mount in silver and black colors, features Interchangeable arms with quick connect for easy and flexible set-up. This mount offers to create dual monitor setup, side-by-side for up to 30" monitors or stacked for up to 24" monitors. Position your monitors at any desire angle using the full-motion arms with articulation and spring-assisted height adjustment. This stand features integrated cable management and rotates 360 deg for easy landscape-to-portrait screen rotation..Stackable dual monitor mount with full-motion arms.Steel, aluminum and plastic enclosure.Supports 30" display.Mounting surface thickness: desk clamp: 0.39 - 2.95", grommet clamp: 0.39 - 3.74".Number of displays supported: 2.One-touch height adjustment.Interchangeable arms with quick connect for easy and flexible set-up.Meets TAA standards.Includes 2-in-1 desk or grommet mount, M6 Allen key, M3 Allen key, base cushion, spring arm, thumb screws and instruction manual.Comes with 2 years warranty.Comes in black/silver.Rubber feet protect desk surface.2-year manufacturer limited warranty.Dual monitor mount with full-motion arms - stackable.

This crossbar monitor desk mount is designed to support up to two 27-inch displays, creating an ergonomic multi-monitor setup that provides an extensive viewing area for productivity. The built-in handle enables moving all monitors simultaneously, while the spring-assisted arm enables multiple adjustments to suit different ergonomic needs. Height Adjustment with One Smooth Motion The mechanical spring arm enables toolless height adjustment of up to 12.9in (32.7cm) with effortless one-touch motion. The maximum arm extension is 22.6in (57.4cm) and a total weigh capacity of 33lb (15kg). Visual Experience This monitor mount is ideal for bezel-less or slim bezel displays, creating a more extensive and seamless viewing experience that enhances multitasking and productivity. The VESA mounts can slide along the crossbar, allowing for further adjustments..The monitor arm is ideal for bezel-less or slim bezel displays, creating a more extensive and seamless viewing experience that enhances multitasking and productivity.Supports monitors up to 27 inches and features two arms for dual monitor setup..Has an adjustable height range from 7.9 inches to 20.8 inches..Black Aluminum.Offers a range of articulation options to ensure optimal positioning and viewing comfort: Pivot Angle: 180 degrees Tilt Angle: -90 to +85 degrees Rotation Angle: 360 degrees Swivel Angle: 180 degrees Viewing Angle: Adjustable to suit your needs.Weighs approximately 13.2 pounds..Dimensions: Height: 20.8 inches Width: 31.2 inches Length : 25.2.Compatible with the VESA mount pattern. It supports both 75x75mm and 100x100mm VESA configurations, allowing for versatile mounting options for your monitors..It is compliant with TAA (Trade Agreements Act) requirements.

Increase productivity and free up space by mounting two monitors, stacked, with this attractive desktop stand. This sturdy and sleek dual-monitor stand raises two displays off the surface of your desk or table, to save space while increasing your productivity. With its steel construction, the freestanding monitor stand securely holds two monitors, each up to 27", stacked vertically. Configure your displays to enhance productivity. The dual-monitor stand holds two displays, one above the other, in a vertical configuration. You can work more comfortably, reducing neck and eye strain without having to look side to side when comparing files or reviewing reference material on your screens. It's ideal for numerous applications including web design, coding, creating and reviewing files, and many others. The monitor mount saves valuable desk space and lets you work clutter-free, which is a welcome addition in numerous office environments including business, healthcare and financial settings. You can adjust the height of the monitors as needed, along the 32.2" (818 mm) pole. Adjust your screens to the ideal position. The monitor stand enables smooth, effortless +45°/-45° tilt and +45°/-45° swivel, making it easy to reduce glare and find the perfect viewing angle. It can also rotate a full 360° giving you the flexibility of portrait or landscape viewing. Rugged steel design. The heavy-duty steel monitor stand holds your monitors securely in place, to protect your investment and provide long-lasting stability. The dual-monitor stand supports two displays 13" to 27" (330 to 686 mm) in size and 22.1 lb. (10 kg) in weight per monitor. The surface finish features a powder coating to help resist scratches. For easier mounting, the VESA mount features notches that let you pre-set the mounting screw, then slide the monitor into place and tighten the screw. To help keep your work area free of clutter, the monitor stand also features cable clips that keep your cables neatly out of sight. The ARMBARDUOV is backed by a StarTech 2-year warranty and free lifetime technical support..Mount two monitors vertically to save space and increase your comfort.Freestanding monitor stand supports two displays up to 27" (686 mm) in size and 22.1 lb. (10 kg) in weight per monitor.Heavy-duty steel construction.The height of the monitors can be adjusted along the 32.2" (818 mm) pole.Adjust your screen angle easily with +45°/-45° tilt and +45°/-45° swivel.Full 360° rotation.Cable management

Elevate your workspace with the StarTech Dual Adjustable Monitor Mount, designed to support up to two vertically stacked 49" monitors. This heavy-duty mount is perfect for maximizing productivity and creating an organized, clutter-free environment. This dual adjustable monitor mount is designed for desk use, supporting up to two vertically stacked monitors to maximize workspace and enhance productivity. It supports up to 49" monitors with two arms, making it ideal for ultrawide and curved screens. The mount allows for height adjustments along a 27.4-inch pole, providing flexibility for various viewing preferences. The mount comes in a sleek black color and is constructed from durable steel and plastic materials, ensuring longevity and stability. It features a pivot angle of +/- 90°, tilt angle of +/- 90°, rotation angle of 360°, and swivel angle of +/- 90°, offering a wide range of viewing angles. This monitor mount does not include storage options such as bays, drawers, or shelves, focusing solely on monitor support and organization. Weighing 15.4 lbs., the mount provides a sturdy and stable base for heavy monitors. The overall dimensions are 36.3 inches in height, 36.3 inches in width, and 8.4 inches in depth, fitting well on most desks. Compatible with VESA mounting patterns of 75x75 mm and 100x100 mm, it ensures compatibility with a wide range of monitors. The mount is TAA-compliant, meeting the necessary standards for quality and performance. Upgrade your setup with the StarTech Dual Adjustable Monitor Mount and experience a new level of efficiency and comfort. Perfect for professionals who demand the best in their workspace. Ready to enhance your productivity? Get yours today!.This dual adjustable monitor mount is designed for desk use, supporting up to two vertically stacked monitors to maximize workspace and enhance productivity..Supports up to 49" monitors with two arms, making it ideal for ultrawide and curved screens..The mount allows for height adjustments along a 27.4-inch pole, providing flexibility for various viewing preferences..The mount comes in a sleek black color and is constructed from durable steel and plastic materials, ensuring longevity and stability..Features a pivot angle of +/- 90°, tilt angle of +/- 90°, rotation angle of 360°, and swivel angle of +/- 90°, offering a wide range of viewing angles..This monitor mount does not include storage options such as bays, drawers, or shelves, focusing solely on monitor support and organization..The mount weighs 15.4 lbs., providing a sturdy and stable base for heavy monitors..The overall dimensions are 36.3 inches in height, 36.3 inches in width, and 8.4 inches in depth, fitting well on most desks..Compatible with VESA mounting patterns of 75x75 mm and 100x100 mm, ensuring compatibility with a wide range of monitors..The mount is TAA-compliant, meeting the necessary standards for quality and performance.

Transform your workspace with the Ergotron LX Pro Dual Side-by-Side Monitor Arm. Designed for modern professionals, this sleek and durable aluminum arm supports two monitors up to 27", offering unmatched flexibility and ergonomic comfort. With Constant Force™ technology, you can effortlessly lift, tilt, pan, and rotate each screen for optimal viewing angles that reduce strain and boost focus. The side-by-side configuration maximizes desk space while the streamlined cable management keeps your setup clean and organized. Whether you're working, designing, or multitasking, the LX Pro delivers style, performance, and reliability—all backed by a 10-year warranty. Upgrade your desk and elevate your productivity..Built for dual monitors with side-by-side desk arm configuration.Supports screens up to 27" for efficient multitasking setups.Raises monitors with 13" lift for ergonomic viewing comfort.Crafted from durable aluminum with a sleek black finish.Allows 360° rotation, 85° tilt, and full swivel for flexible positioning.Clears desk space with compact base and clean cable routing.Weighs 13.7 lbs. for sturdy yet manageable installation.Fits VESA 100 x 100 mm and 75 x 75 mm mounting patterns.Measures approx. 17" H × 20" W × 5" D for space-saving design.Meets ANSI/BIFMA standards for quality and air safety.Ergotron 10-year limited warranty.

The Ergotron LX Dual Stacking Arm brings unmatched flexibility to dual-monitor setups. Whether you're stacking two displays vertically or placing a laptop beside a monitor, this polished aluminum arm adapts to your workflow with smooth lift, tilt, pan, and rotation. Save desk space by folding the arms away when not in use, and enjoy ergonomic comfort with 13" of height adjustment. Built to last through 10,000 movement cycles, it’s the perfect solution for professionals who demand performance, style, and versatility—all in one sleek package..Designed as a dual stacking arm for flexible monitor or laptop mounting on desks..Supports two screens up to 24" or one monitor and one laptop for versatile setups..Provides 13" of vertical lift for personalized viewing comfort..Polished aluminum build adds durability and a sleek, modern look..Allows 75° tilt, 360° pan, and full 360° rotation for dynamic screen positioning..Compact design with no drawers, bays, or shelves for clean workspace integration..Weighs 16.8 lbs., ensuring strong support without excess bulk..Supports VESA MIS-D 100 x 100 mm & 75 x 75 mm mounting patterns..Measures 12.7" x 6.9" x 14.8" for a space-efficient footprint..Certified to Clean Air GOLD and ANSI/BIFMA standards for safe indoor use..Ergotron 10-year limited warranty.

Desk Mount Dual Monitor Arm - Desk Clamp VESA Compatible Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL3).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) to easily mount and tighten by hand to a desktop (40-85 mm thickness) & cable management clips to hold incl. tools for quick height & angle adjustment.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SLEEK DESIGN: Streamlined look w/ small footprint enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +30/-30° tilt, +90/-90° swivel, 360° rotating display, and height adjustment along the 15.7" (39.8 cm) pole.Dimensions: 19.6"H x 34.1"W x 4.9"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk C-Clamp | Dual Swivel Arms | Adjustable | For up to 32” Monitors

Heavy duty multi-adjustable articulating arm dual monitor desk mount supports up to two 14-inch to 30-inch monitors weighing up to 17.6lbs each..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Supports up to 30" monitors for versatile use.Made of aluminum.-45 to 90 degree tilt and -90 to 90-degree rotation adjustment options enable optimal viewing.-90 to 90-degree rotation allows monitors to be oriented vertically or horizontally.Weighs 7.5 lbs..Dimensions: 17.7"H x 35.04"W x 4.53"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.2-year manufacturer limited warranty

The StarTech.com® ARMSLIMDUO dual monitor mount supports two 12" - 30" monitors, side-by-side. It features two independent arms with full-motion articulation to adjust your dual-monitor setup easily. This monitor mount provides two USB pass-through ports and two 3.5 mm audio ports for added connectivity. It supports up to 8 kg weight per mounting arm. This monitor mount has aluminum construction for enhanced durability. It offers 360 deg rotation around the support post and at the elbow. This monitor mount comes with integrated 4' 6" cables for USB and audio pass-through ports..Dual monitor mount for clutter-free workspace.Maximum size: 12" to 30", Load capacity: 17.7 lbs..Material: Durable aluminum construction.Pan angle: 180 deg, Tilt angle: 90 deg/ -65 deg down, Rotation angle: 360 deg, Swivel /pivot: 135 deg around the support post 360 deg at the elbow.Color: Black.VESA mount standard: 100 x 100, 75 x 75, Certifications and standards: RoHS.Maximum arm extension: 22.3", Maximum arm span: 44.7".Two independent arms with full-motion articulation and spring-assisted height adjustment.Two USB pass-through ports and two 3.5 mm audio ports.Landscape to portrait screen rotation.Hidden cable management hide cables for a clean installation.Integrated 4' 6" cables for USB and audio pass-through ports to hide cables for a clean installation.Mount on a desk or table using a C-clamp.Includes: One mounting arm, two desk clamps, two desk clamps, two VESA monitor mounts, eight M4 x 12 mm screws, eight M4x30 mm screws, eight spacers.Comes with 2 years warranty

Desk Mount Dual Monitor Arm - Desk Clamp / Grommet VESA Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL2).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) or grommet to easily mount and tighten by hand. Adjust the height and angle quickly with the included tools attached to the cable management clips.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SMALL FOOTPRINT: Space-saving design enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +45/-45° tilt, +90/-90° swivel, 360° rotating display, and adjustable height along the 15.7" (39.8 cm) pole.Dimensions: 21.57"H x 35.94"W x 5.83"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk/Grommet | Double Joint | Adjustable | For up to 32" Monitors

Finding the correct ergonomic height for your monitors and adjusting their distance is easy, thanks to the sturdy and stable Kensington SmartFit Ergo dual extended monitor arm. Clear valuable desk space while improving ergonomics. Wide adjustment range delivers 180-degree swivel, 360-degree rotation (for landscape or portrait orientation), 90-degree monitor tilt adjustment, and arm extension up to 15.7". Sturdy metal C-clamp and grommet fastener are easy to install and won't damage or mark the desk or table. Each arm is compatible with displays up to 32" and 17.6 lbs..Raise your monitors to a comfortable viewing height with this dual monitor arm.Supports most flat panel monitors up to 32" for versatile use.Made of steel and comes in black.-45 to 45-degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.Weight capacity: 17.6 lbs. per arm.Dimensions: 21.57"H x 35.94"W x 5.83"D.Compatible with VESA 75 x 75mm, 100 x 100mm mounting patterns.SmartFit system makes finding the right height for maximum comfort easy: simply match your hand size to the color on the provided chart, set the height to your color, and you're done.Extendable arms let you easily adjust the distance of your monitors (up to 15.7").Included C-clamp and grommet fastener are made of durable steel and aluminum, require less desk space to attach, are easy to install, and won't damage or mark your desk or table.Cable management system eliminates cable clutter for a cleaner desktop.Meets or exceeds RoHS standard.2-year manufacturer limited warranty

This is a dual 18” arm combination attached to a 15.7” post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminum, the mount can be easily recycled at the end of its life. Ideal for displays up to 32” in a landscape or portrait orientation. Perfect for screen real estate-demanding applications and multi-user environments in applications where display height does not require frequent adjustment..Dual arm monitor mount that can be installed in a dual row side-by-side or back-to-back.Ideal for displays up to 32".The AWMS-2-4640 is a dual 18" arm combination attached to a 15.7" post.Built from lightweight and yet durable aluminum. Color: Silver.No spring assisted height adjustability. Tilt +45/-25 degrees, 360 degree rotation around poll. Pan adjustment, portrait to landscape screen rotation, and height adjustable..14.92 lbs..Package dimensions: 16.00" x 12.50" x 8.50".VESA 75x75 to 100x100

Upgrade your workspace with the Ergotron HX Wall Dual Monitor Arm, designed for dynamic professionals who demand flexibility and style. Supporting two monitors up to 32", this polished aluminum arm delivers smooth, effortless adjustments with Constant Force™ Technology. Enjoy personalized viewing with independent pivots that tilt, pan, and rotate each screen, while the hinged bow makes screen sharing seamless. Built to last and tested for over 10,000 cycles, it’s a durable solution that saves space and enhances productivity. With sleek cable management and BIFMA level® 2 certification, it’s the smart, sustainable choice for modern work environments..Built for wall mounting, ideal for dual monitor setups in compact workspaces.Supports two monitors up to 32" each for enhanced productivity and viewing comfort.Adjusts vertically from 0" to 11.5" to suit sitting or standing positions.Finished in polished aluminum for a sleek, professional look and lasting durability.Allows 360° rotation, 180° pan, 75° tilt, and 90° pivot for personalized screen angles.Designed without drawers or bays to maintain a clean and minimal profile.Weighs 19.2 lbs., ensuring stability without compromising flexibility.Mounts using VESA MIS-D 75 x 75 mm and 100 x 100 mm patterns.Measures 11.5" H x ~32" W x 24.5" D when fully extended from the wall.Certified to BIFMA level® 2 for low environmental and social impact.Ergotron 10-year limited warranty.

Upgrade your workspace with this freestanding dual monitor mount, designed to support two screens from 13" to 32" without the need for desk clamps or drilling. Its weighted base sits securely on your desktop, providing full motion functionality including 180° rotation, ±90° swivel, and ±45° tilt for perfect viewing angles. Compatible with VESA 75x75 and 100x100 patterns, this mount supports up to 17.6 lbs. per screen. Integrated cable management keeps cords tidy and out of the way. Enjoy quick installation, easy screen adjustments, and a cleaner, more flexible setup—ideal for home offices, gaming, or shared workspaces..Freestanding Design: Sits securely on your desk without clamps or grommets.Full Motion Range: 180° rotation, ±90° swivel, and ±45° tilt for optimal viewing.VESA Compatible: Supports 75x75 and 100x100 mounting patterns.Dual Monitor Support: Holds two monitors from 13""–32"" up to 17.6 lbs. each.Integrated Cable Management: Keeps wires neat and workspace tidy.Freestanding Dual Monitor Mount for Ergonomic Viewing and Desk Flexibility

"M/Flex’s modular design makes it simple to reconfigure and allows for independent adjustment of monitors when they are used separately — encouraging flexibility and collaboration at the workstation. By easily setting monitors at an optimal distance and height, M/Flex increases usable desk space and allows the user to work in a healthy posture throughout the day.".The M/Flex multi-monitor arm system allows the user to simply swap attachments to suit their changing technology needs while retaining a sleek, minimal aesthetic. Manufactured primarily from recycled aluminum, M/Flex is as recyclable as it is beautiful..M/Flex offers the most versatile, modular multi-monitor system available. By lifting up to six monitors—up to 20 lbs. each—off the work surface, M/Flex frees up valuable desk space, helping to preserve the existing office aesthetics. M/Flex’s removable 180-degree stop also protects walls and panels..M/Flex offers effortless adjustment and enables easy, spontaneous configurations. With its plug-and-play customization, M/Flex allows users to add monitor arms, attachments and accessories as needed. M/Flex is the perfect addition to the modern and constantly evolving workspace and, when paired with the M/Connect™ monitor arm base, users can completely eliminate cable clutter and gain easy access to USB ports and high-speed charging.

Enhance your WorkFit Dual workstation with the Ergotron Tall-User Kit, designed to meet ergonomic height requirements for taller users. This upgrade adds 30° of up/down tilt adjustment, improving display positioning for greater comfort during prolonged sitting or standing. Compatible with WorkFit-S, WorkFit-A, WorkFit-C, and select WorkFit-T/TL models, the kit includes two monitor pivots, riser brackets, and mounting hardware for easy installation. Supporting monitors up to 24" and a combined weight of 12–28 lbs., it ensures stable, flexible performance. With full 360° rotation and VESA MIS-D compatibility, this black kit delivers a tailored ergonomic experience backed by a five-year warranty..Converts dual-monitor setups for ergonomic use in sit-stand workstations..Supports two monitors up to 24" each for balanced dual-screen productivity..Raises display height to meet ergonomic needs of taller users..Finished in sleek black with durable metal construction for long-term use..Compact kit design with no drawers or shelves for streamlined installation..Weighs just 2.9 lbs., making it lightweight yet sturdy for daily use..Measures 22" x 6.5" x 5.1" to fit easily into workstation setups..5-year limited warranty..Compatible with VESA MIS-D 100/75 mm mounting standards.

Save space by mounting two monitors on your wall - Wall Mount Dual Monitor Arm - Articulating - Works on VESA Mount monitors incl Acer & HP & Samsung - Steel - Supports two 15“ to 24” Monitors - Both monitors are mounted on a single arm so they move together in perfect unison to stay aligned - Mounting arm extends out from the wall up to 23" (585 mm) or tucks back to 6.5” (165 mm) from wall for a low-profile look - Dual monitor wall mount / Dual Monitor Arm / Computer monitor wall mount.Wall mount two 15“ to 24” monitors to save space.Adjust your monitors in unison, to keep your screens aligned.Mounting arm extends out from the wall up to 23" (585 mm), or tucks back to 6.5” (165 mm) from wall for a low-profile look.Heavy-duty steel construction.Swivels up to 180 degrees for optimal viewing.Rotate your monitors up to 360 degrees for landscape or portrait viewing.Supports weight capacity of 11 lb. (5 kg) per monitor.Dimensions: 7.2"H x 2.76"W x 25.2"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Save space by mounting two monitors on your wall