Ubiquiti PoE Access Points

The Ubiquiti® airCube-AC Series ACB-AC-US wireless access point in black, has a sleek design with durable plastic construction. It features 4 Gigabit Ethernet ports with data transfer rate of up to 1.14 Gbps. The dual band access point utilizes 802.11ac and 2x2 MIMO technologies for reliable performance. It has throughput of up to 300 Mbps in 2.4 GHz radio band and up to 866.7 Mbps in 5 GHz radio band. This access point with super antenna, ensures UNMS and U mobile support. It is suitable for use in your customer deployments..Wi-Fi access point is perfect for use in customer deployments.Dimensions: 3.52"H x 3.51"W x 3.46"D.Comes in black color with plastic construction.Interfaces/ports: 4 x Gigabit Ethernet port.Wireless LAN: 802.11ac 2x2.Gain: 4 dBi at 2.4 GHz, 5 dBi at 5 GHz.Frequency: Dual band 2.4 GHz, 5 GHz simultaneously.Power supply: 24 Volt PoE or 24 Volt PSU in on LAN port 1.Wireless transmission speed: 1.14 Gbps.Maximum power consumption: 8.5 W, temperature: -10 to 50 deg C (operating), humidity: 5 to 95 percent noncondensing (operating).Throughput: Up to 300 Mbps in the 2.4 GHz radio band, Up to 866.7 Mbps in the 5 GHz radio band.Features UNMS support, super antenna, U mobile support and sleek design.Features 22 dBm maximum TX power, status LED and UNMS app for fast setup from a mobile device.Features PoE pass-through, Powers airMAX device, with PoE in/out, controllable 24 V PoE out on WAN port technology.Meets CE, FCC, IC standards.Weight: 9.88 oz.

The UniFi nanoHD AP has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi Network mobile app (iOS or Android), the UniFi Network Application is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance..Dual-band access point for over 200 clients.Supports ac wireless standard with 6.5Mbps to 1.7Gbps and 58Mbps to 1.7Gbps data transfer rates.Powered using PoE+ and supports Wi-Fi 6E standard.Contains 1 x 1GbE RJ45 port.Includes: mounting plate, ceiling backing plate, and hardware kit.Works on 2.4/5GHz frequencies.Meets or exceeds the CE, FCC, IC, and cULus standards.Covers up to 1500 sq. ft..Supported voltage range: 44-57VDC.Maximum power consumption: 10.5W.Can be wall- or ceiling-mounted.PoE power adapter included.1 Year Warranty.Omni-directional 802.11ac Wave 2 Wi-Fi Access Point with 4x4 MU-MIMO technology. The price / performance leader in enterprise Wi-Fi.

High-Density Applications Powered by MU-MIMO Technology 802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience. Radio Hardware Acceleration Independent 2.4 GHz and 5 GHz dedicated hardware offload for maximized multi-user throughput and reduced latency CPU Hardware Acceleration Dedicated hardware offload for QoS, Guest Control, and Client Management Optimized for MU-MIMO Antenna System Optimized for 802.11ac Wave 2 MU-MIMO Beamforming Beamforming Data is sent and received using multiple antennas to increase throughput and range. Advanced Features in UniFi Controller UniFi is quickly expanding to a full Software Defined Networking (SDN) solution with seamless integration of high-performance switching, gateways, and more...Type of Product: Wireless Access Point.Adapter Speed: 1733Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 8.7 x 8.7 x 1.9.Power Rating/Voltage: DC Input Power, Consumption 17 W.Powerful Hardware The UniFi AC HD AP features the latest in Wi-Fi 802.11ac Wave 2 MU-MIMO technology..Expandable Unlimited scalability: build wireless networks as big or small as needed. Start with one (or upgrade to a five-pack) and expand to thousands while maintaining a single unified management system..Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.UniFi is quickly expanding to a full Software Defined Networking (SDN) solution with seamless integration of high‑performance switching, gateways, and more

High-Performance airMAX ac Bridge Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is ideal for CPE deployments requiring maximum performance. Management Wi-Fi Radio The PowerBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam AC offers a more robust mount with a convenient lifting loop or handle. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses. Plug and Play Installation The PowerBeam AC requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the PowerBeam AC features the highest gain for its size. The PowerBeam AC's excellent beam directivity provides the best performance in high-noise environments. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management dadio: 2412-2462MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.Mounting bracket conveniently offers elevation adjustments (20-degree tilt).1 Year Warranty

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

Ubiquiti wall-mounted WiFi 6 AP with 6 spatial streams and a built-in 4-port switch ideal for single-room coverage in hospitality environments..Wireless dual band (2.4GHz, 5GHz) access point perfect for single-room coverage in hospitality environments.Throughput rate: 573.5Mbps (2.4GHz), 4.8Gbps (5GHz).One out port with PoE support and one GbE PoE/PoE+ in port.Wi-Fi 6 certification supports all mandatory 802.11a/b/g/n/ac/ax features that include MU-MIMO 2 x 2 UL (2.4GHz), 4 x 4 DL/UL (5GHz).Contains 1 x data-in: GbE RJ45 port, and 4 x data-out: GbE RJ45 ports.Power over Ethernet (PoE): 48V.Meets or exceeds the CE, FCC, IC standards.Power consumption: 13.5W (excluding PoE output) maximum.Provides support for WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) wireless security.Supported guest traffic isolation and more than 300 devices.Dimensions: 5.5"H x 3.8"W x 1.3"D

Ceiling-mounted WiFi 7 AP with six spatial streams and 6 GHz support for interference-free Wi-Fi in demanding, large-scale environments..Ceiling-mounted tri band access point or interference-free Wi-Fi in demanding, large-scale environments.802.11a/b/g/n/ac/ax/be with six spatial streams and 6 GHz support with up to 5.7 Gbps throughput rate.Offers Wi-Fi AX and BE support.Contains 2.5 GbE uplink port.Powered using PoE+.Works on 2.4 GHz, 5 GHz and 6 GHz frequencies.Meets or exceeds CE, FCC, IC standards.Made of polycarbonate and metal in white

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)

The Access Point WiFi 6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access pointideal for home and ofce use. The U6 Pro is capable of reaching an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4x4 MIMO) and 2.4 GHz (2x2 MIMO) bands, which allows itto support over 300 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. It can also isolate your guesttrafc to ensure optimal security and speed. The U6 Pro also operates atfull 4x4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. It can be set up in minutes and fully managed with the UniFi Network application..Supports dual-band Wi-Fi (2.4 GHz and 5 GHz) operation, ideal for high-performance indoor wireless access point deployments..Delivers 802.11ax (Wi-Fi 6) wireless connectivity with a maximum data transfer rate of 4800 Mbps (4.8 Gbps)..Features Power over Ethernet (PoE) capability..Includes a Gigabit Ethernet (RJ-45) port with 802.3at PoE+ support for both data and power connectivity..Package includes the Access Point WiFi 6 Pro and a wall/ceiling mount for easy installation..Backed by a 2 year limited warranty.

High-Performance airMAX ac Bridge Incorporating innovative industrial design with proprietary airMAX ac technology, the NanoBeam AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint. Management Wi-Fi Radio The NanoBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The NanoBeam AC features enhanced protection against ESD events. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the NanoBeam AC features the highest gain for its size. The NanoBeam AC's excellent beam directivity provides the best performance in high-noise environments. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Advanced Software Technology Ubiquiti's airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Plug and Play Installation The NanoBeam AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 10km (6.21 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 Gigabit Ethernet (RJ-45) main Ethernet port (PoE-in) and 1 x secondary Ethernet port (PoE pass-through).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter and a pole mount kit.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5470-5725MHz, U-NII-3 5725-5850MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.1 Year Warranty

2x2 MIMO airMAX ac CPE The LiteBeam AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Management Wi-Fi Radio The LiteBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS 8 and airView airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the LiteBeam AC fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Comes with a 24V/0.3A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management radio: 2412-2462MHz.Meets or exceeds the CE, FCC, and IC standards.Operating system: airOS 8.1 Year Warranty

Ubiquiti introduces the airCube a cost-effective wireless access point for use in your customer deployments. It offers convenient PoE passthrough to power a 24V airMAX CPE device, so you can use a single PoE adapter to power this device. Management options feature a graphical user interface designed for streamlined setup and control. The Ubiquiti airCube can be installed and configured using the UNMS (Ubiquiti Network Management System) app on your mobile phone or tablet. Web UI enables a standalone utility for basic configuration..Home Wi-Fi access point for use in your customer deployments.Dimensions: 3.52"H x 3.46"W x 3.51"D.Designed to interoperate with airMAX CPEs.Comes in black and made of plastic.Features four 10/100 fast Ethernet ports.Wireless speeds of up to 300Mbps in the 2.4GHz radio band.Wi-Fi standard: 802.11n, 2x2 MIMO technology.Its attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.Innovative super antenna provides wide-area coverage beyond regular Wi-Fi access points.Use the intuitive UNMS mobile app for iOS and Android to install and configure the device.Can be powered by and provide power to airMAX CPE using 24V passive PoE or 5V power adapter with Micro-USB (not included).LED lights up when the device is powered on.Meets or exceeds FCC standard.1-year manufacturer limited warranty

Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point is ideal for point-to-multipoint applications and requires CPE devices with a sleek form factor. Bridge has a panel antenna with dual-polarity and requires no tools for assembly..Wireless data transfer rate: 150 Mbps.Frequency: 2.41 - 2.46 GHz ISM.Dimensions: 11.6"(H) x 3.1"(W) x 1.2"(D).Interfaces/ports: Ethernet port, fast ethernet port, 2 x network (RJ-45), PoE (RJ-45) port.Antenna gain: 11 dBi, outdoor antenna range - 9.3 mile, wireless LAN standard - IEEE 802.11n, ISM band.Management: Web based management, airControl.Power supply: PoE.Form factor: Pole mountable.Processor: Atheros MIPS 24KC, 400 MHz.Operating temperature: -30 - 75 deg C, Operating humidity: 5 - 95% condensing.Memory: 32MB SDRAM, 8MB Flash.Features: MIMO technology, quality of service, LED indicator.With software-enabled PoE output, the secondary ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.Polarization: Dual linear.Includes pole mounting kit.Certifications and standards: ETSI300-019-1.4, FCC Part 15.247, IC RS210, CE, IEEE standards - 802.11 b/g/n/802.3af.Weight: 14.11 oz..Warranty: 1 year limited.Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point has CPE design that expanded the global wireless ISP industry and offers transfer rate up to 150 Mbps.

Ubiquiti U6 Enterprise ceiling-mounted WiFi 6E AP with 10 spatial streams and 6GHz support to provide seamless, multi-band coverage within high client density environments..Wireless tri-band (2.4GHz, 5GHz, 6GHz) access point intended for enterprises that need more wireless capacity and/or wider channels.AX standard supports data transfer rates from 7.3Mbps up to 4.8Gbps.Wi-Fi 6E certification supports all mandatory 802.11a/b/g/n/ac/ax features.Contains a 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at) and a DC power connector.Includes a wall/ceiling mount kit.Powered using PoE+.Meets or exceeds CE, FCC, IC standards.10 spatial streams.Offers a coverage of up to 1500 sq. ft..Supports 600+ concurrent clients