Ubiquiti PowerBeams

High-Performance airMAX ac Bridge Incorporating innovative industrial design with proprietary airMAX ac technology, the NanoBeam AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint. Management Wi-Fi Radio The NanoBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The NanoBeam AC features enhanced protection against ESD events. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the NanoBeam AC features the highest gain for its size. The NanoBeam AC's excellent beam directivity provides the best performance in high-noise environments. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Advanced Software Technology Ubiquiti's airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Plug and Play Installation The NanoBeam AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 10km (6.21 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 Gigabit Ethernet (RJ-45) main Ethernet port (PoE-in) and 1 x secondary Ethernet port (PoE pass-through).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter and a pole mount kit.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5470-5725MHz, U-NII-3 5725-5850MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.1 Year Warranty

2x2 MIMO airMAX ac CPE The LiteBeam AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Management Wi-Fi Radio The LiteBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS 8 and airView airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the LiteBeam AC fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Comes with a 24V/0.3A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management radio: 2412-2462MHz.Meets or exceeds the CE, FCC, and IC standards.Operating system: airOS 8.1 Year Warranty

The LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI. The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.Long-range station directs RF energy in a tighter beamwidth.Dimensions: 20.18"H x 15.19"W x 10.17"D.Features aluminum reflector, plastic PC and comes in white.Equipped with 10/100/1000 Ethernet port.Features improved radio design, mounting, and surge protection.Manage Wi-Fi radio/UISP with mobile app.Works on AirOS 8.Feaures access point PtMP airMAX mixed mode, airMAX ac Protocol Support, long-range point-to-point (PtP) link mode.Automatic channel selection, automatic/manual transmit power control, automatic distance selection (ACK timing) ensure great performance.AirMagic channel selection tool, redesigned user interface, and dynamic configuration changes are desinged for great usability.Optimization for mobile devices and detailed device statistics are included.HTML5 technology and comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer are made for convenient use.24V, 0.3A Gigabit PoE adapter and pole-mounting kit are included.Meets or exceeds CE, FCC, IC standards.2-year manufactuer limited warranty

Provide your business with a wireless solution that ensures a speedy and steady data transfer rate.With IEEE 802.11ac network technology and data transfer rate of up to 330 Mbit/s, enjoy superior HD media playback and lag-free gaming.Up to 10x faster than standard Ethernet connectivity for your wired network

The Access Point WiFi 6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access pointideal for home and ofce use. The U6 Pro is capable of reaching an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4x4 MIMO) and 2.4 GHz (2x2 MIMO) bands, which allows itto support over 300 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. It can also isolate your guesttrafc to ensure optimal security and speed. The U6 Pro also operates atfull 4x4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. It can be set up in minutes and fully managed with the UniFi Network application..Supports dual-band Wi-Fi (2.4 GHz and 5 GHz) operation, ideal for high-performance indoor wireless access point deployments..Delivers 802.11ax (Wi-Fi 6) wireless connectivity with a maximum data transfer rate of 4800 Mbps (4.8 Gbps)..Features Power over Ethernet (PoE) capability..Includes a Gigabit Ethernet (RJ-45) port with 802.3at PoE+ support for both data and power connectivity..Package includes the Access Point WiFi 6 Pro and a wall/ceiling mount for easy installation..Backed by a 2 year limited warranty.

airMAX ac BaseStation with airPrism Technology The Rocket Prism 5AC covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas. Management Wi-Fi Radio The Rocket Prism 5AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The Rocket Prism 5AC features enhanced protection against ESD events. Revolutionary Filtering Technology Ubiquiti's patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments. Designed for High Performance The Rocket Prism 5AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Full-Band 5 GHz Coverage The Rocket Prism 5AC delivers complete coverage of the 5 GHz spectrum with a single radio. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..5 GHz Wide Band Operating Frequency.Custom Ubiquiti airMAX ac Processor.Dedicated Wi-Fi Radio for Management

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

Shielded airMAX® ac BaseStation with airPrism® Technology : With a die-cast aluminum base and interchangeable antenna, the PrismStationTM AC, brings increased performance to your network using technology that isolates beam communications between your devices. Utilizing Ubiquiti's advanced airMAX® ac processor, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). Built to Fight Noise With Prism Active RF Filter: The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios - and functioning despite noise from other vendors' radios (unlike GPS synchronization) - airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Modular Design: The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs..Interchangeable Isolation Antenna Horn.airPrism Active RF Filtering Technology.Dedicated Wi-Fi Radio for Management

The Ubiquiti® R5AC-LITE-US wireless bridge has transmission speed of 500 Mbps and operates in the frequency band of 5 GHz. This bridge measuring 1.5" x 3.3" x 6.4", has one RJ-45 interface for reliable connectivity..Wireless bridge supports high data rates.Dimensions: 1.5"H x 3.3"W x 6.4"D.Interfaces/ports: One RJ-45.Connectivity technology: Wireless, Ethernet technology: Gigabit Ethernet.Wireless transmission speed: 500 Mbps, Frequency band: 5 GHz, full-band.Data link protocol: IEEE 802.11n, MIMO Technology.Link type: PtP, PtMP.RoHS Compliant

Ubiquiti introduces the airCube a cost-effective wireless access point for use in your customer deployments. It offers convenient PoE passthrough to power a 24V airMAX CPE device, so you can use a single PoE adapter to power this device. Management options feature a graphical user interface designed for streamlined setup and control. The Ubiquiti airCube can be installed and configured using the UNMS (Ubiquiti Network Management System) app on your mobile phone or tablet. Web UI enables a standalone utility for basic configuration..Home Wi-Fi access point for use in your customer deployments.Dimensions: 3.52"H x 3.46"W x 3.51"D.Designed to interoperate with airMAX CPEs.Comes in black and made of plastic.Features four 10/100 fast Ethernet ports.Wireless speeds of up to 300Mbps in the 2.4GHz radio band.Wi-Fi standard: 802.11n, 2x2 MIMO technology.Its attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.Innovative super antenna provides wide-area coverage beyond regular Wi-Fi access points.Use the intuitive UNMS mobile app for iOS and Android to install and configure the device.Can be powered by and provide power to airMAX CPE using 24V passive PoE or 5V power adapter with Micro-USB (not included).LED lights up when the device is powered on.Meets or exceeds FCC standard.1-year manufacturer limited warranty

Ubiquiti wall-mounted WiFi 6 AP with 6 spatial streams and a built-in 4-port switch ideal for single-room coverage in hospitality environments..Wireless dual band (2.4GHz, 5GHz) access point perfect for single-room coverage in hospitality environments.Throughput rate: 573.5Mbps (2.4GHz), 4.8Gbps (5GHz).One out port with PoE support and one GbE PoE/PoE+ in port.Wi-Fi 6 certification supports all mandatory 802.11a/b/g/n/ac/ax features that include MU-MIMO 2 x 2 UL (2.4GHz), 4 x 4 DL/UL (5GHz).Contains 1 x data-in: GbE RJ45 port, and 4 x data-out: GbE RJ45 ports.Power over Ethernet (PoE): 48V.Meets or exceeds the CE, FCC, IC standards.Power consumption: 13.5W (excluding PoE output) maximum.Provides support for WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) wireless security.Supported guest traffic isolation and more than 300 devices.Dimensions: 5.5"H x 3.8"W x 1.3"D

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

Ceiling-mounted WiFi 7 AP with six spatial streams and 6 GHz support for interference-free Wi-Fi in demanding, large-scale environments..Ceiling-mounted tri band access point or interference-free Wi-Fi in demanding, large-scale environments.802.11a/b/g/n/ac/ax/be with six spatial streams and 6 GHz support with up to 5.7 Gbps throughput rate.Offers Wi-Fi AX and BE support.Contains 2.5 GbE uplink port.Powered using PoE+.Works on 2.4 GHz, 5 GHz and 6 GHz frequencies.Meets or exceeds CE, FCC, IC standards.Made of polycarbonate and metal in white

Shielded airMAX CPE With a die-cast aluminum base and interchangeable antenna, the IsoStation is available in two models and brings increased performance to your network using technology that isolates beam communications between your devices. The IsoStation AC delivers throughput speeds of up to 450+ Mbps, and the IsoStation M5 delivers throughput speeds of up to 100+ Mbps. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The IsoStation also gets maximum gain out of the smallest footprint. Beam Performance Perfected The IsoStation can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Enhanced Co-Location Asymmetrical horn antenna options (60 degrees and 90 degrees ) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30 degrees and 45 degrees , the default) are ideal for cluster sector installations with high co-location requirements. Improved Noise Immunity IsoStation blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. High MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Management Wi-Fi Radio The IsoStation AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Interchangeable Isolation Antenna Horn.All-Metal, Shielded Radio Base.airMAX ac Processor for Superior Performance

Ubiquiti™ Networks™ Bullet™ 2.4 GHz Wireless bridge measuring 1.2" x 1.5" x 6" is made from aircraft-grade aluminum and can withstand nature's harshest element. Bridge has N-Type connector that creates a powerful and robust outdoor access point..Wireless data transfer rate: 100 Mbps.Frequency: 2.41 - 2.46 GHz.Dimensions: 1.2"(H) x 1.5"(W) x 6"(D).Interfaces/ports: 1 x 10/100 BASE-TX (Cat. 5, RJ-45) ethernet interface.Antenna connector: N-type, outdoor antenna range: 31.1 Mile.Power: PoE, consumption: 7 W, up to 24 V.Enclosure: Outdoor UV stabalized plastic.Operating temperature: -40 - 80 deg C, Operating humidity: 5 - 95% condensing.System requirements: Linux SDK.LED indicator, weather proof.Compatibility: IEEE 802.11b/g/n.Certifications and standards: FCC Part 15.247, IC RS210, CE, RoHS.Weight: 6.35 oz..Warranty: 1 year limited.Ubiquiti™ Networks™ Bullet™ 2.4 GHz Wireless bridge has a data transfer rate of 100 Mbps and it features a tough weatherproof design.

The UniFi nanoHD AP has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi Network mobile app (iOS or Android), the UniFi Network Application is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance..Dual-band access point for over 200 clients.Supports ac wireless standard with 6.5Mbps to 1.7Gbps and 58Mbps to 1.7Gbps data transfer rates.Powered using PoE+ and supports Wi-Fi 6E standard.Contains 1 x 1GbE RJ45 port.Includes: mounting plate, ceiling backing plate, and hardware kit.Works on 2.4/5GHz frequencies.Meets or exceeds the CE, FCC, IC, and cULus standards.Covers up to 1500 sq. ft..Supported voltage range: 44-57VDC.Maximum power consumption: 10.5W.Can be wall- or ceiling-mounted.PoE power adapter included.1 Year Warranty.Omni-directional 802.11ac Wave 2 Wi-Fi Access Point with 4x4 MU-MIMO technology. The price / performance leader in enterprise Wi-Fi.