Unshielded Cable

The C2G® 7' male to male category 6 yellow snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in yellow color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in black.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G ® 3' blue Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The C2G 3' green Cat6 snagless patch cable is suitable for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. It has one RJ-45 - male connector on both the ends for reliable connectivity. The 24-AWG stranded copper conductors ensure optimal signal conductivity. It has HDPE insulation and PVC jacket for long lasting durability. The unshielded twisted pairs reduce interference and structural return loss. This cable with snagless design protects the connectors from damaged to offer long period optimal performance..Cat6 UTP patch cable with snagless design protect clips while plugging and unplugging.Cable length: 3'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG (7/0.20) copper conductors for better conductivity.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in green color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G® 7' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.21 lbs..Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G 31341 5' Cat6 snagless white network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G® 3' male to male category 5e gray snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Snagless patch cable resists breakage.Cable length: 3'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 24 AWG stranded bare copper, Construction: Polycarbonate.Certifications and standards: Meets RoHS and Cat5e TIA/EIA standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.09 lbs..Comes with lifetime warranty.StarTech.com® HDDVIFM8IN 8" HDMI to DVI-D Cable adapter effectively routes video signal between DVI-D and HDMI devices. Supports 1920 x 1200 resolution video signal.

The C2G 31341 5' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 3975 6' blue Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Dimensions: 6'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Type: Patch cable - CAT 6.Technology: UTP.Wiring Scheme: T568B.Wires per Cable: 8 wires.Features: Snagless, stranded , minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Manufacturer Warranty: Limited lifetime warranty

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

Active converter cable saves upgrade cost by connecting your DVI computer to a VGA monitor or projector. For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL)..Snagless design protects clips when plugging and unplugging.Standard RJ45 connectors and unshielded twisted pair wires.Color: Black.PoE (Power Over Ethernet).Warranty Type: Lifetime.Cable Length: 3 ft.Wire Gauge: 24 AWG.RJ-45 Male to RJ-45 Male

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..This patch cable is perfect for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications.Designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk; comes in blue.50 cables per pack.Supports 10 Gigabit Ethernet networks up to 180' for fast data transmission and maximum performance and 1 Gigabit Ethernet networks up to 328'.Snagless connector design for high-density environments and protecting the RJ45 connector's lock.Meets or exceeds the EIA/TIA TSB-40 CAT-6 standards.Cable length is 10'

Panel type unshielded RJ45 (8P8C) keystone jack..White.Length: 6.1".Panel type unshielded RJ45 (8P8C) keystone jack.110/krone IDC horizontal punchdown termination for 22-26 AWG UTP solid wire.Balances signal transmission of insertion loss and crosstalk from 1 to 250 MHz.Complies with FCC part 68.Includes: Two plastic strain relief caps for IDC connector, three color coded designation dust covers with voice, data and Cat6 icons.Meets or exceeds industry standard category 6/class E according to TIA/EIA 568b 2.1 and ISO 11801 2nd edition.Lifetime limited warranty