100BASE-FX Transceivers

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

The Cisco multi-mode rugged SFP module adapts your switch or router, enabling you to connect long-range cables. As a result, you can extend the range of your network and expand connectivity. The SFP module is made with an intuitive design that is easy to install and use, so you can expand your network quickly and with minimum hassle..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.33"(H) x 0.52"(W) x 2.22"(D).Compatibility: Cisco 100 m Ethernet SFP Compatibility matrix.Connectivity technology: Wired.Optical wave length: 1310 nm.Temperature: 122 deg F max operating.Compliant standards: IEEE 802.3, IEEE 802.3ah.Connectivity media: Multi mode fiber 100Base-FX.Max transfer distance: 1.2 miles.Data transfer rate: 100 Mbps fast ethernet.Form factor: Hot-swappable.90 days limited warranty.Cisco Multi-Mode Rugged SFP Module - Hot-Swap Capability

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical Fiber media support for a dependable and productive connectivity.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building.SFP with data networking application/usage for reliability and maximum efficiency

The Transition Networks TN-GLC-FE-100FX small form factor pluggable (SFP) Transceiver modules is designed to install in any SFP port allowing for 100Base-FX interfaces to the network through the SFP connector..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100 Mbps for connectivity.With 100Base-FX technology, enjoy up to 100 Mbps data transfer rate over optical fiber cable

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.SFP with optical network application/usage for maximum dependability and convenience

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Optical Fiber media support ensures maximum convenience and great usability.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.) The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Expand your network capabilities with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10 /100 Base-TX technology get up to 100 Mbps data transfer rate over optical fiber cable.With Wall mounting feature, you can conveniently install the device while keeping the wires and cables organized

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Optical Fiber media support for efficient and reliable connectivity.SFP with optical network application/usage for reliability and maximum efficiency

The ME-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments. NDAA Compliant, TAA Compliant.DIN Rail clip and Velcro included.Multiple mounting options:.No configuration required.Available with LC, ST or SC fiber interfaces and available for multimode or single mode fiber.Small mechanical size allows use in enclosures with space constraints

Juniper® SFP Module features Ethernet 100Base-Fx interface. Plug-in module offers a network speed of up to 100 Mbps..Network adapter interface: Ethernet 100Base-FX.Network adapter speed: Up to 100 Mbps.Network technology: 100Base-FX.Form factor: Plug-in module.Warranty: 1 year limited.Juniper® EX-SFP-1FE-FX 1000Base-FX SFP Module has fiber 100Base-FX connectivity media and is used in data networking.

Addon SFP transceiver can be deployed with other OEM or 3rd party transceivers to provide seamless network performance. SFP transceiver is 100 percent compliant with all networking product lines..Hard drive accessory type: SFP transceiver.Interfaces/ports: 1 x 100base-FX.Connectivity media: 62.5/125 um multi-mode optical fiber, 50/125 um multi-mode optical fiber.Form factor: SFP.Range: 2 km.Data rate: 100 Mbps fast Ethernet half/full-duplex.Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Fiber type: Multi-mode fiber.Application: Data networking.Connectivity: Wired.Transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.Certifications & Standards: MSA.Warranty: Lifetime limited.Addon® SFP transceiver is a hot-swappable input/output device that plugs into a gigabit ethernet slot and operates at 1310 nm over multi-mode fiber.

This Moxa SFP-1FEMLC-T compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Moxa. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building.Hot-swappable form factor for added reliability and dependability

This Hirschmann M-FAST-SFP-MM/LC compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Hirschmann. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Optical Fiber media support for a dependable and productive connectivity.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This Allen-Bradley® 1783-SFP100FX compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Allen-Bradley®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Compatible with Allen-Bradley 1783-SFP100FX.100Base FX SFP.Ensures reliable performance for everyday use

Features The Axiom 100Mbps POE (PSE) Series are a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Compliant with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feet). Features: 10/100Base-TX UTP to 100Base-FX fiber media conversion IEEE802.3af PoE PSE compatible Built-in AC/DC power supply Over-current protection DIP switch to set different configurations LFP (Link Fault Pass-through) support.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 100Base-LX technology get up to 100Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

This Avago HFBR-57E0APZ compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This N-Tron® NTSFP-FX compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with N-Tron®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical Fiber media support for a dependable and productive connectivity.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

This Hirschmann SFP-FAST-MM/LC-EEC compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Hirschmann. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

This N-Tron® NTSFP-FXE-15 compatible SFP transceiver provides 100Base-FX throughput up to 15km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent N-Tron® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of N-Tron®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information

This Emerson® VE6050T08 compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Emerson®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity