1000BASE-T Switches

This eco-friendly WebSmart switch conforms with the Allied Telesis commitment to environmentally friendly processes and products. It is designed to minimize power consumption through the use of a high efficiency power supply..Network management type: Smart switch.Ports: 24 ports.Port configuration: 24 x RJ-45 10/100/1000Base-T.Buffer memory: 512 KB.Address database size: 8000 MAC addresses.Lifetime limited warranty.Management: Web based management, Port based VLAN, 802.1p QoS, port trunking.Static multicast group.Spanning tree, 802.1d/w.Power: 120 - 230 VAC, 50 / 60 Hz.Number of SFP slots: 4.Number of total expansion slots: 4.Media type supported: Twisted pair.Includes: AT-GS950/24 24 port gigabit websmart Switch, wall and 19" rack mount brackets, U.S. power cord.Compliant standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x.Allied Telesyn™ AT-GS950/24 Ethernet Switch features 24 ports, twisted pair, and gigabit ethernet.

This switch is a next generation smart managed switch with 52Gbps switching capacity. It provides (24) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual speed SFP slots. The embedded Device Management System (DMS) provides the benefits of ease of use in the IP surveillance, wireless Access Point and other applications. The DMS capability built into the switches is new from Transition Networks and provides time-saving features enabling security integrators or network administrators to establish and document a baseline deployment, automatically discover and remotely configure attached IP-powered devices (PDs)..IPv6 Access Management.Support Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.DHCP Relay, DHCP Snooping, DHCP Server.L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL.LLDP (Link Layer Discovery Protocol).IEEE 802.3az Energy Efficiency.IP Source Guard, Port Security.Syslog

The Transition Networks® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.

This switch is a next generation smart managed switch with 20Gbps switching capacity. It provides (8) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual speed SFP slots. The embedded Device Management System (DMS) provides the benefits of ease of use in the IP surveillance, wireless Access Point and other applications. The DMS capability built into the switches is new from Transition Networks and provides time-saving features enabling security integrators or network administrators to establish and document a baseline deployment, automatically discover and remotely configure attached IP-powered devices (PDs)..IPv6 Access Management.Support Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.DHCP Relay, DHCP Snooping, DHCP Server.L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL.LLDP (Link Layer Discovery Protocol).IEEE 802.3az Energy Efficiency.IP Source Guard, Port Security.Syslog

Allied Telesis™ Managed WebSmart gigabit ethernet switch features 10/100/1000Base-T network technology. Switch has web-based management protocol and supports 2 layer communication..Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T, Media type supported: Twisted pair.Interfaces/ports: 16 x RJ-45.Dimensions: 1.7"(H) x 13.9"(W) x 8.5"(D).Form factor: Wall-mountable, rack-mountable.Management protocols: Web-based management, port-based VLAN, 802.1p QoS, port trunking/link aggregation, port mirroring, priority queue's, spanning tree, statistics & diagnostics.Layer supported: 2.Expansion slots: 2, Expansion slot details: 16 x Gigabit Ethernet network, 2 x Fast Ethernet expansion slot.Temperature: 32 - 104 deg F, Humidity: 5 - 90%, Voltage: 110 - 220 VAC input.Includes: AT-GS950/16 16 port Gigabit webSmart switch, wall & 19" rack-mount brackets, U.S. power cord.Certifications: IEEE 802.3x, UL 1950, FCC/EN55022 Class A, VCCI-Class A, C-Tick, EN60950 (TUV), EN55024, CE.Weight: 5.25 lbs..Warranty: Lifetime limited.Allied Telesis™ Managed WebSmart gigabit ethernet switch has 16 interface ports and is rack-mountable.

The Allied Telesis GS910 Series offers unmanaged Gigabit switching solutions for the desktop, and small networks. The series has internal and external power supply versions, and also features network loop guard technology, which automatically detects any unexpected network loops, and prevents network devices from broadcast packet storms. OverviewWith minimal to no set-up, GS910 Series switches provide simple and seamless connectivity to existing network infrastructure. High performanceThe GS910 Series delivers the high speed and high performance demanded by today's high-bandwidth applications, such as video, graphics and industrial design. Quality and reliabilityAllied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and industry-recognized quality. Loop detectionGS910 Series switches provide network loop detection by using Loop Detection Frame (LDF). LDF detects network loops, and shuts down ports where the loop is detected. After the loop is solved, the port that has shut down is automatically recovered. Environmentally-friendly eco-switchAllied Telesis GS910 Series eco-friendly switches conform with the Allied Telesis commitment to environmentally-friendly processes and products. They are designed to minimize power consumption through the use of a high-efficiency power supply and a low-power chipset. With low power consumption and a reduction in power outside regular work hours (overnight mode), as well as other power-saving features included as standard, the Allied Telesis GS910 Series truly lives up to its eco-friendly reputation. Not only does this help the planet by reducing the carbon footprint of each switch, it also lowers the Total Cost of Ownership (TCO) to the user, as the device costs less to run, and features improved reliability..Quickly and easily set up a wired network with 5 networking ports.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience.The unmanaged switch provides a quick, easy and cost-saving way to add wired networking to your home, office or small business; no intervention needed.Built-in power supply to ensure all components are being supplied with accurate voltage.The desktop installation makes it ideal for deployments outside the wiring closet

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

D-Link® WebSmart Managed gigabit ethernet switch features gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has storm control which protects against broadcast, multicast and unknown unicast storm..28-ports 10/100/1000Base-T gigabit Ethernet, fast Ethernet.Address database size: 16000 MAC addresses.Managed switch.Total Number of network ports: 24, Number of network (RJ-45) ports: 24.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, fast Ethernet, Network technology: 10/100/1000Base-T.Number of total expansion slots: 4, Number of SFP slots: 4.Standard memory: 128MB, memory technology: DDR2 SDRAM, flash memory: 16MB.Performance: Switching capacity: 56 Gbps, forwarding performance: 41.7 Mpps.Jumbo frame support: 10000, MTBF: 236739 hrs.Remote management protocol: SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, HTTP, CLI.Interfaces: 24 x 1000Base-T - RJ-45, 4 x SFP (mini-GBIC).Eco-friendly operation with D-Link green technology, web based management and auto discovery utility, true plug and play.Fanless design for quiet operation, fiber media support via 4 dedicated SFPs, DSCP and QoS with auto voice VLANs for VoIP, advanced security features, IPv4/IPv6 dual-stack.Displays MAC address, IP address, DHCP hostname, insight plus will report client security, time when device was last seen transmitting data on the network.Input voltage: 110 VAC, 220 VAC, Power source: Power supply.Operating temperature: 32 - 122 deg F, Operating humidity: 0 - 95%.Certifications and standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x.Warranty: Lifetime limited.D-Link® WebSmart Managed gigabit ethernet switch with a standard memory of 128 MB requires an input voltage of 110/220 VAC and has 24 network ports.

TRENDnet's Industrial Gigabit L2+ Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today's SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° - 75° C (-40° - 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. This industrial 802.3bt PoE++ switch has four gigabit PoE++ ports with a 360W PoE power budget, plus two SFP slots for long distance fiber applications. Advanced PoE technology supported includes Perpetual PoE, Fast PoE, and PoE Alive Check..This switch includes 4 Gigabit Ethernet ports and 2 Gigabit SFP slots, offering a 12Gbps switching capacity. It is a Layer 3 managed switch, ideal for industrial and SMB network environments requiring advanced traffic control and reliability.Supports IEEE 802.3bt PoE++ with a 360W total PoE power budget, delivering up to 90W per port. Features include Perpetual PoE, Fast PoE, PoE scheduling, and PD alive check to automatically reboot unresponsive devices.Each port supports Gigabit Ethernet (10/100/1000 Mbps), ensuring high-speed data transmission across all connected devices.Designed for DIN-Rail mounting, the switch features a rugged IP30-rated metal enclosure suitable for harsh industrial environments with high vibration, shock, and extreme temperatures ranging from -40°C to 75°C.This is a wired-only switch and does not support wireless connectivity, focusing on robust, high-speed wired networking.Supports SNMP v1, v2c, and v3, enabling remote monitoring and management of network performance and device health.Includes IEEE 802.1p QoS with queue scheduling (SPQ/WRR) and DSCP support, allowing prioritization of critical traffic for smoother network performance.Offers a comprehensive management suite including Web GUI, CLI (Telnet/SSH), VLAN (802.1Q/Q-in-Q), IGMP Snooping, MLD, MVR, and MAC address filtering.Also supports Ethernet Ring Protection Switching (ERPSv2) for redundancy and alarm output for power failure alerts.Delivers non-blocking throughput with store-and-forward switching, and supports link aggregation (LACP), STP/RSTP, and bandwidth control per port for optimized traffic handling.Operates with dual redundant power inputs, includes overload current protection, and supports energy-efficient PoE scheduling to reduce power usage during off-hours

The Tenda TEG1005D is a 5-port Gigabit Ethernet switch designed to provide high-speed network connectivity for home and small office environments. This unmanaged switch supports up to 5 gigabit ports, each capable of delivering speeds up to 1000 Mbps, ensuring fast and stable connections for your devices. It is perfect for expanding your network with additional wired connections and is ideal for use with computers, printers, IP cameras, gaming consoles, and other Ethernet-enabled devices. The TEG1005D operates efficiently with its plug-and-play functionality, requiring no configuration, making it user-friendly for those who need quick, hassle-free setup. The switch is also energy-efficient, consuming less than 2.5W of power, which helps reduce operating costs. It features auto-sensing technology for automatic adjustment of port speeds and duplex settings to ensure the best possible performance for each connected device. With support for Jumbo Frame sizes up to 15KB, the TEG1005D provides efficient handling of large data packets, making it suitable for demanding tasks such as video streaming or large file transfers. This switch is built to operate in a range of environments, with an operating temperature range from 0°C to 40°C and the flexibility to be mounted on a desktop or wall..The Tenda TEG1005D features 5 Gigabit Ethernet ports, offering Gigabit Ethernet performance. It is an unmanaged switch, designed for plug-and-play simplicity with no configuration required..Provides a data transfer rate of up to 1000 Mbps (1 Gbps) per port, ensuring fast and efficient network communication..Has a desktop form factor and is also wall-mountable, providing flexibility for installation in various environments..The Tenda TEG1005D supports Gigabit Ethernet throughput with full-duplex operation on each port, ensuring maximum network performance and efficiency..Designed to be energy-efficient, consuming less than 2.5W of power, helping reduce operating costs and utilizing energy-saving technology..Complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab standards for Ethernet connectivity, ensuring reliable performance and compatibility across various devices and network setups.

Fast. Compact. Convenient.: The D-Link DGS-1005P 5-Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS-1005P is compact and operates silently, making it ideal for most rooms and offices.: Gigabit Performance. : The DGS-1005P features plug-and-play installation and requires no configuration.: Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets. Power Over Ethernet+: The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W.: You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technology: The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection.: EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent: The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium.: The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms..Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 5 ports.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience.Managed switch provides a reliable foundation for your network

CyberData 3-Port gigabit Ethernet switch is fully compatible with IEEE 802.3u standard and features 10/100/1000 full duplex with RoHS Compliant. Switch has 1.4 Gbps high performance memory bandwidth and consumes less power..3-port auto-negotiating (no crossover cablerequired).USB or PS/2 mouse-powered(no external power supply required).VLAN Packet Forwarding.USB A to B cable included.Each port has auto MDX - any port can beused as the uplink connection.All ports are 10/100/1000 Mbps auto sensingbased upon the port's individual connection.Interfaces/ports: 3 x RJ45, 1 x USB-B.Dimensions: 1.1"(H) x 3.78"(W) x 2.75"(L).Compatibility: PC.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Power: 350 mA at 5V (supplied by a USB or PS/2 port).LEDs: Link, status and connection speed.Operating temperature: -10 - 50 deg C.Form factor: Wall mountable.Input voltage: 5 VDC, power source: USB.Certifications and standards: IEEE 802.3u, RoHS.Includes: 3 port Gigabit Ethernet switch, USB A to B cable.Weight: 0.2 lbs..Warranty: 2 years limited.CyberData 3-Port gigabit Ethernet switch is powered through a PC's USB or PS/2 mouse and has LEDs that shows the link, status as well as connection speed.

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

748305aacfb94d13fcf70f731a800a0a.Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet (GbE) connections, including four PoE+ ports. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited. Expand your network This Gigabit Ethernet switch lets you expand your network by connecting up to eight RJ45 devices (four PoE+). The 8-port switch enables up to eight users to share files and devices, such as printers and scanners, over a LAN connection, by enhancing your existing network capacity with additional ports. Supports PoE+ for flexible use The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant PoE power, with up to 30 watts for each PoE port (120W budget). Wall-mountable with front access With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports and indicators. It's ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable. Efficient Layer 2 management The switch delivers efficient and stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, and customize your settings to achieve optimal network performance, offering improved efficiency and reliability. Rugged industrial design This rugged network switch features an IP30-rated metal housing and extended operating temperature range of -40°C to 75°C, which makes it ideal for a wide range of conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments. Reliable connection for seamless network performance With support for 10/100/1000Mbps transfer speeds, this managed switch supports full/half-duplex auto-negotiation, jumbo frames, and auto MDI/MDIX operation. This lets you connect your network devices quickly and easily, with little to no configuration required. To help prevent any unnecessary downtime, the switch features redundant 12-58V DC terminal block power inputs, which ensures seamless operation in the event of power dips or failures. The IES81GPOEW is backed by a StarTech.com 2-year warranty and free lifetime technical support..Expand your network with 8x RJ45 (4 PoE+) ports in one Gigabit network switch.PoE power up to 30W per PoE+ port (120W budget).Rugged IP30 industrial design with metal housing and extended temperature range (-40 degreesto +75 degreesC)

D-Link DGS-1100 series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 series perfect for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Desktop switch offers highly flexible solution for the needs of a diverse range of businesses with support for PoE, advanced management, troubleshooting tools, and energy-efficient technology.Contains eight 10/100/1000Mbps ports (PoE).Supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface.IGMP snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput.Dimensions: 1.1"H x 6.7"W x 3.9"D.Maximum power consumption: 77.9W (PoE on), 4.6W (PoE off).Certifications and standards: Meets or exceeds FCC Class B, CE Class B, VCCI Class B, BSMI, cUL, CE LVD, CB standards.Fanless design for a longer product life and silent operation.Bandwidth Control ensures latency-sensitive traffic always gets the bandwidth it needs.Quality of Service further prioritizes latency-sensitive traffic, ensuring timely delivery.Segregate different types of traffic, such as surveillance or voice, with VLANs to heighten security.PD Alive feature automatically reboots malfunctioning connected PoE devices to mitigate downtime.Innovative energy-saving features are good for your budget, as well as the environment.Equipped with advanced security features, such as static MAC, storm control, and IGMP snooping.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Provides Power over Ethernet (PoE) support, reducing deployment time for IP cameras, VoIP phones, and access points.Can be powered by a PoE switch or injector, allowing for more flexible installation in remote areas with no available power outlets.Comes in black

D-Link® 10-port Managed gigabit ethernet switch features 10 gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has 8000 MAC addresses database..PoE switch.Dimensions: 1.73"H x 11.02"W x 7.08"D.Compatible with PC.Comes in black/silver color.Interfaces: 8 x 10/100/1000BASE-T PoE, 2 x SFP.Media type supported: Twisted pair, optical fiber, twisted pair cable standard: Category 5e, Ethernet technology: Gigabit Ethernet.Layer supported: 3, PoE standard: IEEE 802.3af & IEEE 802.3at, PoE capable ports: Ports 1 to 8: Up to 30W.Form factor: Rack mountable, desktop, network cables: UTP Cat.5, Cat.5e (100m max), EIA/TIA-568 100-ohm STP, transmission method: Store-and-forward.Manageable, management: VLAN, QoS, MIB, Syslog, diagnostic LEDs: Power (per device), PoE Max (per device), link/activity/speed.Switching capacity: 40 Gbps, MAC address table: 16, 000 entries per device, packet forwarding rate: 14.88 Mpps, packet buffer memory: 1.5MB.IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX (Fast Ethernet), IEEE 802.3ab 1000BASE-T (Gigabit Ethernet), auto-negotiation.Security: Broadcast multicast/unicast storm control, D-Link safeguard engine, DHCP server screening.IP-MAC-Port binding (smart binding) - Supports 512 address binding entries, ARP inspection, ARP + IP inspection, supports DHCP Snooping.Power source: Power supply, input voltage: 120 - 230 VAC, PoE power budget: Max. 78 W.Operating temperature: 23 - 122 deg F, storage temperature: -4 to 158 deg F, humidity: 0 - 95 % non-condensing (operating/storage).Meets FCC Class A, CE Class A, ICES-003, VCCI Class A, C-Tick, BSMI, Safety, cUL, CE LVD, ENERGY STAR, WEEE standards.Weight: 3.1 lbs..D-Link® 10-port Managed gigabit ethernet switch is compatible with 1U rack unit and requires input voltage of 110/220 VAC.

Cisco Catalyst IE3300 Rugged Series switches deliver high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Rugged switch delivers Gigabit Ethernet connectivity in a compact form factor, and designed for a wide range of industrial applications where hardened products are required.Eight 10/100/1000 RJ45 Ethernet PoE+ and two 100/1000 SFP ports.Managed with powerful tools such as Cisco DNA Center and Cisco Industrial Network Director, and can be easily set up with a completely redesigned user-friendly modern GUI tool called WebUI.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 32W.Built for harsh environments and temperature ranges (-40 to 167 degrees Fahrenheit).Hardened for vibration, shock and surge, and electrical noise immunity.Complies with multi-industry specifications for automation, ITS, and substation environments.Covers a wide range of Power over Ethernet (PoE) (up to IEEE 802.3bt type 4) application requirements.Alarm I/O for monitoring and signaling to external equipment.High-density industrial Power over Ethernet (PoE) enables ready-to-use PoE devices, such as IP phones, cameras, and wireless access points.User-friendly GUI (called WebUI) allows for easy configuration and monitoring.SwapDrive for true zero-configuration and simple switch replacement in the event of a failure.Full Flexible NetFlow Enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection.5-year manufacturer limited warranty

Pure compatibility, pure stability, pure design. The perfect fit for any stable, future-proof system, even where space is limited..This unmanaged Gigabit Ethernet switch features five ports, supports speeds of 10/100/1000 Mbps, and operates without the need for configuration..Data transfer rate of 10/100/1000 Mbps, supporting Gigabit Ethernet speeds.It has a mega compact form factor, measuring just 55 x 55 x 16 mm (2.17 x 2.17 x 0.63 inches), which is smaller than a standard business card..Designed for straightforward plug-and-play operation without the need for configuration.With a throughput of 10/100/1000 Mbps, this device supports Gigabit Ethernet speeds and operates in a non-blocking layer 2 mode, ensuring efficient data transfer without packet loss..Maximum power consumption of 3.3W.Industrial operating temp (-40 °C to +85 °C / -40°F to +176°F).Seamless integration with design software - logical placements and fixed distances.Board to board and board to cable connection.LEDs visible in all orientations – can be directed to outer casing via fiber optics or light pipe, or electrically wired.Comes with a 10 year limited warranty

The Allied Telesis™ CenterCOM AT-GS910/8-10 8-port layer 3 unmanaged Ethernet switch in gray, is suitable for high-bandwidth applications like video, graphics and industrial design. It works on Gigabit Ethernet technology and 10/100/1000Base-TX network technology. This switch has 16 Gb/s switching capacity and 11.9 Mpps throughput. It supports twisted pair media type..Unmanaged Ethernet switch for high-bandwidth applications, such as video, graphics and industrial design.Dimensions: 3.8 cm H x 21 cm W x 12.1 cm D.Color: Gray.Interface/ports: Eight 10/100/1000 port.Ethernet technology: Gigabit Ethernet.Network technology: 10/100/1000Base-TX.Switching capacity: 16 Gb/s, Throughput: 11.9 Mpps, MAC address table size: 4K entries.Media type: Twisted pair.Form factor: Wall mountable/desktop.Layer supported: 3.Power: 120 - 230 VAC at 50/60 Hz internal power supply, Consumption: 4.5 W.Temperature: 0 - 50 deg C (operating).Meets ECO, RoHS, WEEE, EU RoHS, REACH certifications and standards

The HP J9986A 24-port managed Gigabit Ethernet switch is perfect for data networking and has data transfer rate up to 1 Gbps. It is compatible to use with 5400R zl2 switch series. This switch supports Gigabit Ethernet 1000Base-T technology for reliable data transfer. It includes RJ-45 1000Base-T network LAN ports for connectivity..Gigabit Ethernet switch ensures to provide enterprise-class resiliency and innovative flexibility as well as scalability to mobile-first networks.Dimensions: 1.8"H x 10.3"W x 8.1"D.Compatible with PC.Has 24 RJ-45 autosensing 10/100/1000 PoE+ Gigabit Ethernet ports for connectivity.Features Freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD card and 4GB DDR3 SODIMM for reliable performance.Latency: 1000MB latency: < 2.8 us, 10 Gb/s latency: < 1.8 us, 40 Gb/s latency: < 1.5 us.Throughput: Up to 1142.8 Mpps.Switching capacity: 1920 Gb/s, Switch fabric speed: 2030 Gb/s.PoE+ internal power supply delivers constant power.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T.Form factor: Plug-in module.Contains HP 5412R zl2 switch and three HP 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 module J9986A.REACH and Green compliant.Weight: 45.19 lbs..Comes with lifetime limited warranty

TRENDnet® 8-Port green net switch features green net technology which adjusts the power voltage as needed. Gigabit green net switch boost your office efficiency and eliminate network congestion..8 ports 10/100/1000base-T gigabit ethernet.Address database size: 8000 MAC addresses.Management: Unmanaged switch.Power: Input: 100 - 240 V, 50/60 Hz, 190 mA, output: 5 VDC, 1 A external power adapter, consumption: 3.5 W (max.).Form factor: Desktop.Dimensions: 1"(H) x 5.8"(W) x 3.8"(D).Media type supported: Twisted pair, twisted pair cable standard: category 6.Layer supported: 2.Switch fabric: 16 Gbps forwarding capacity.Data RAM buffer: 256 Kbytes, jumbo frame support: 9216 bytes.Protocol / topology: CSMA/CD, Star.Network media: Ethernet: Cat. 5 up to 100 m, fast Ethernet: Cat. 5 up to 100 m, Gigabit Ethernet: Cat. 5, 5e,6 up to 100 m.Data rate: Ethernet: 10Mbps/20Mbps (half/full-duplex), Fast Ethernet: 100Mbps/200Mbps (half/full-duplex), Gigabit Ethernet: 2000Mbps (full-duplex).Store and forward switching architecture with non-blocking wire-speed performance.Temperature: Operating: 0 - 40 deg C, storage: -10 - 70 deg C, humidity: max 90% (non-condensing).Includes multi-language quick installation guide, power adapter (5 VDC, 1 A).Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Weight: 13.4 oz..Warranty: 3 years limited.Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Warranty: 3 years limited.TRENDnet® 8-Port green net switch reduces power consumption by up to 70 percent and provides high bandwidth performance.

The GS108Tv3 eight-port Gigabit Ethernet Smart Managed Pro switch provides a great value, with flexible and cost-effective solution for SMB data, voice, and video converged network. Advanced features such as Layer 3 static routing, IPv6 management, ACL, DiffServ QoS, LACP link aggregation and spanning tree will satisfy even the most advanced small business networks. Remote/cloud management capability with NETGEAR Insight. By activating the NETGEAR Insight cloud management, the users will enable fundamental management features allowing businesses to have simpler configuration and deployment from anywhere using the NETGEAR Insight app from mobile devices or the Insight Cloud Portal from any device with a web browser..Smart Gigabit Ethernet switch with cloud management provides LAN access for eight users.Eight 10/100/1000BASE-T RJ45 ports.Easy to manage via web-based management GUI or Smart Control Center.Bandwidth: 16Gbps.Dimensions: 1.1"H x 6.2"W x 4"D.5.5W maximum power consumption (with all ports used, line-rate traffic); 1.9W minimum power consumption (link-down standby); features IEEE 802.3az for maximum power savings.Fanless design allows for silent operation, great for deployment in noise-sensitive environments.Features VESA holes for desktop and wall-mounting.Flexible and cost-effective solution for SMB data, voice, and video converged network.Features one PD port to receive power from another PoE switch or injector.Layer 3 static routing with 32 routes (IPv4) for inter-VLAN local routing.Advanced VLAN support for better network segmentation.IGMP Snooping and Querier for multicast optimization.Rate limiting and priority queuing for better bandwidth allocation.Auto DoS prevention.RMON and SNMP v1, v2c, v3 remote monitoring.L2/L3/L4 access control lists for granular network access control including 802.1x port authentication.Advanced QoS for traffic prioritization including port-based, 802.1p, and L2/L3/L4 DSCP-based.Remote/cloud management capability with NETGEAR Insight app.Lifetime manufacturer limited warranty; 2-year manufacturer limited warranty on power adapter

The Tenda SG105M is a 5-port Gigabit Ethernet switch designed for home and small office use. It offers a reliable and fast networking solution with auto-negotiation for 10/100/1000 Mbps speeds, providing seamless data transmission across your devices. The switch is unmanaged, making it simple to install and use without the need for complex configuration. With a compact form factor, the SG105M can be placed on a desk or mounted on a wall, offering versatility in placement. This switch is ideal for connecting PCs, smart TVs, game consoles, printers, and other Ethernet-enabled devices, enabling fast and stable wired connections. It supports plug-and-play functionality and ensures automatic connection speed adjustments based on the connected device. The SG105M is designed for low power consumption and comes equipped with essential features like auto MDI/MDIX, ensuring ease of use and compatibility with various network setups. The SG105M is a cost-effective solution for users seeking to expand their home or office network while maintaining high performance and efficiency..The Tenda SG105M features 5 Gigabit Ethernet ports, with Gigabit Ethernet performance class, and operates as an unmanaged switch, providing a simple plug-and-play solution without requiring network configuration..The switch supports data transfer rates of up to 1000 Mbps (Gigabit Ethernet), ensuring fast and stable network performance..The SG105M comes in a compact desktop form factor, suitable for home or small office environments..The Tenda SG105M does not support Simple Network Management Protocol (SNMP), as it is an unmanaged switch..The Tenda SG105M does not feature Quality of Service (QoS) capabilities, as it is designed to provide basic switching functionality without advanced traffic prioritization..The SG105M is an unmanaged switch with no advanced system management or security features, designed for simple network setups..The SG105M offers high throughput with a 10/100/1000 Mbps auto-negotiation feature, ensuring compatibility with a wide range of devices and network speeds..The SG105M is designed for low power consumption, incorporating energy-saving features that automatically power down unused ports to reduce energy usage..The Tenda SG105M complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab standards, ensuring broad compatibility and reliable performance with various network devices.

Accelerate your performance and productivity when you send large files to network servers, drives, and printers at Gigabit speeds..16-ports 10/100/1000Base-T gigabit Ethernet.Address database size: 8000 entries.Unmanaged switch.Interface/ports: 16 x RJ-45.Layer supported: 2.Form factor: Desktop, wall mountable.Dimensions: 1"(H) x 11"(W) x 4.7"(D).Input voltage: 12 VDC.Power consumption: 9.32 W.Media type supported: Twisted pair.Temperature: 0 - 50 deg C, Humidity: 10 - 90 % non-condensing.Easy plug and play connection.Wired connection speed up-to 1000 Mbps.Includes LGS116 16-port gigabit Ethernet switch, power adapter, quick start guide.Certifications and standards: FCC class A, CE, 802.3/U/x/ab/az.Weight: 1.71 lbs..Warranty: Lifetime limited

The D-Link 16-Port Gigabit Switch (DGS-1016D) delivers power, performance, and reliability in one cost-effective, space-saving design. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Users in the office, workgroup, or creative production environment can now transfer large bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network without hesitation. The versatile and compact 1RU height design of the DGS-1016D enables the device to be rack mounted in a standard 19-inch rack while conserving valuable rack space..16-Port Gigabit Switch.16 Ports - Gigabit Ethernet.Media Type Supported Twisted Pair.Network Technology 10/100/1000Base-T.Dimensions: H 1.75" , W 11", D 7.1". Weight: 2.97lb.Limited lifetime Warranty

10/100/1000MBps.Connect computers and other devices so data can be shared at the highest speeds.Compatible with virtually any major network operating system.Accelerate your desktop network with Gigabit connectivity for up to 8 devices.All ports have auto speed negotiation and auto MDI/MDI-X crossover detection

EX2300 and EX2300-C Ethernet Switches deliver a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. Featuring a small, 1U footprint, the EX2300 and EX2300-C are ideal for access-layer deployments in micro branches, retail and workgroup environments, and converged network access in larger networks. The EX2300 offers 24 10/100/1000BASE-T ports in a single platform, while the EX2300-C offers 12 10/100/1000BASE-T ports. Both models are available with or without IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering attached network devices. Optional front panel 10GbE uplink ports support connections to higher-layer devices. Both models support Juniper's unique Virtual Chassis technology, enabling up to four of the switches to be interconnected and managed as a single device. Both models can also act as satellite devices in a Juniper Junos Fusion Enterprise deployment, which combines large numbers of access switches into a logical management platform..Features 12 networking ports to easily establish a local network or expand your existing one.Cascade to other network devices through the uplink port to expand your local area network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network

Get the blazing speed of Gigabit Ethernet with the D-Link DGS-1024D, a 24-port 10/100/1000Mbps Switch that delivers power, performance, and reliability in one cost-effective, space-saving design. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Power users in the office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. The versatile and compact 1RU height design of the DGS-1024D enables the device to be rack mounted in a standard 19 inch rack, while conserving valuable rack space..48Gbps.24-Port Gigabit Switch, Rackmount/Desktop.IEEE 802.3 Ethernet.10BASE-T, 100BASE-TX & 1000BASE-T.10/100/1000MBps.Operating temperature: 32° to 104°F (0° to 40°C).Increases the speed of your network server and backbone connections.Media Type Supported Twisted Pair.PoE: Not Applicable.19.1 W power consumption.48 GBPS switching fabric.High-performance wire-speed and non-blocking architecture.Diagnostic LEDs: Per unit - power, per port - activity/link, speed.Store-and-forward transmission method.Up to 9600 bytes jumbo frames.RoHS compliant.3.64 lbs.1 3/4"(H) x 11.1"(W) x 7.1"(D).Limited lifetime warranty.5-year limited warranty (US and Canada).D-Link DGS-1024D 24-Port 10/100/1000 Gigabit Ethernet Switch is high-performance wire-speed and non-blocking architecture gigabit ethernet switch.

The Tenda TEG1016M is a high-performance, 16-port Gigabit Ethernet switch designed for small and medium-sized businesses as well as home networking environments. Featuring 16 auto-negotiation 10/100/1000 Mbps RJ45 ports, the switch ensures seamless and high-speed data transfer, making it ideal for applications requiring stable and reliable connectivity, such as file sharing, video streaming, and network expansion. With a switching capacity of 32 Gbps and a forwarding rate of 23.8 Mpps, the TEG1016M delivers robust performance to support demanding network setups. Its One-Key VLAN mode allows easy segmentation of ports for improved network security and performance, isolating ports 1-14 while maintaining communication with ports 15 and 16. This feature is particularly useful for surveillance systems or environments requiring secure data traffic management. Built with durability in mind, the TEG1016M features a mini steel shell and a fanless design for silent operation and efficient heat dissipation. Its compact size and wall-mountable design provide flexibility for installation in various setups. The device is also equipped with 6kV lightning protection for all ports, ensuring stable operation in environments prone to electrical surges. Plug-and-play functionality eliminates the need for configuration, making it user-friendly for professionals and non-technical users alike. The switch is CE, FCC, and RoHS certified, guaranteeing compliance with global safety and environmental standards..The Tenda TEG1016M features 16 Gigabit Ethernet ports, supports unmanaged network management, and delivers high-performance connectivity suitable for small to medium-sized networks..Supports a maximum data transfer rate of 1000 Mbps per port, ensuring fast and reliable network performance for bandwidth-intensive applications..The switch comes in a compact desktop form factor, with an option for wall mounting to accommodate flexible installation setups..Simple Network Management Protocol (SNMP) is not supported, as this is an unmanaged switch designed for straightforward, plug-and-play operation..The TEG1016M includes basic Quality of Service (QoS) features for efficient traffic prioritization, ensuring a stable network experience for essential tasks..Provides a One-Key VLAN feature, isolating ports 1-14 while enabling communication with ports 15 and 16, enhancing security and preventing broadcast storms..Offers a 32 Gbps switching capacity and supports both full-duplex and half-duplex operational modes for versatile performance..The device has a maximum power consumption of <12W and features an energy-efficient design, ensuring lower operating costs and eco-friendly performance..Certified for CE, FCC, and RoHS, meeting global safety, environmental, and electromagnetic compliance standards.

Slice seconds or even minutes off your employees' daily activities by relying on the fast speed of this TRENDnet gigabit GREENnet 16-port switch for your company's uploads and downloads. Connect everything from computers and intercom systems to security cameras and alarms to this dependable switch for a safe, steady connection. This switch utilizes sixteen Gigabit Ethernet ports that are also Auto-Negotiation, Auto-MDIX. With Auto-Negotiation, the switch will figure out the appropriate speed to transfer data and the appropriate mode (full or half duplex) depending on what is supported by the device connected to your switch..Number of Ethernet Ports 16, Performance Class & Network Management Type 2 Layer Supported.15 x RJ-45.10/100/1000Base-T.Sturdy metal desktop switch with built in power supply.32Gbps forwarding capacity.Manufacturer's Limited Lifetime Warranty.Operating temperature: 32 - 104 deg F.Store-and-Forward switching architecture with non-blocking wire-speed performance.IEEE 802.3x flow control for full-duplex mode.Back pressure flow control for half-duplex mode.Operates and maximizes packet filtering and forwarding rate.Protocol / topology: CSMA/CD, star.Sturdy metal housing.Jumbo frames: Up to 9216 bytes.Internal Power Supply Reduces Clutter.Certificates: WEEE.TRENDnet Gigabit GREENnet 16-Port Switch - Affordable and Practical

HPE Aruba 9000 series gateways provide high-performance networking, SD-WAN and security functionality in compact and cost-effective form factors. Perfectly suited for branch and small campus networks, the 9000 series gateways serve a key role within Aruba's SD-Branch solution, which unifies WLAN, LAN, SD-WAN and security for distributed enterprises. The 9000 Series can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform. Onsite deployment is accomplished with a simple mobile installer application..Rack-mountable switch provides high-performance networking, SD-WAN, and security functionality in compact and cost-effective form factor.Contains 12 100/1000BASE-T ports (six PoE+ ports).Can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform.Provides connectivity for up to 2048 users or client devices at up to 6Gbps of firewall throughput.Dimensions: 1.72"H x 15.55"W x 10.24"D.Maximum power consumption: 160W (with 120W of POE).Meets or exceeds UL, CAN/CSA-C22.2, EN, IEC, FCC, VCCI, FCC/ISED, MIC, NCC, ANATEL, COFTEL, CCC, KN32, KN35 standards.Cloud-managed and purpose-built for branch SDWAN requirements.Up to 10 times the performance and 80 times the client density of typical SD-WAN appliances.Unified policy enforcement for wired and wireless traffic through Aruba Dynamic Segmentation.Visibility into over 3000 applications with no added hardware.Includes flexible connectivity options, with up to 12 Ethernet ports (six PoE+) that can be used as access/WAN uplinks, a USB 3.0 port for cellular connectivity, and an IoT radio that supports Bluetooth 5, Zigbee, and near-field communication (NFC) wireless protocols.Can also be repurposed as Mobility Controllers starting with ArubaOS 8.5 software to provide WLAN and LAN services, such as Dynamic Segmentation, stateful firewall, and live upgrades.Features a Layer 4-7 stateful firewall with PEF to deliver a consistent user, device, and application awareness across WLAN, LAN, and WAN.1-year manufacturer limited warranty

The Tenda TEG1024D is a high-performance, 24-port Gigabit Ethernet unmanaged switch designed for reliable and efficient network expansion in small to medium-sized businesses, schools, and community networks. With its plug-and-play functionality, the switch requires no complex configuration, making it an ideal choice for users seeking simplicity and performance. Each of its 24 auto-negotiation RJ45 ports supports speeds of 10/100/1000 Mbps, with full-duplex mode enabling data transfer rates of up to 2000 Mbps per port. The TEG1024D features a robust switching capacity of 48 Gbps and a packet forwarding rate of 35.7 Mpps, ensuring seamless data transmission even in high-traffic environments. Housed in a durable metal casing, this fanless switch operates silently and offers flexible installation options, including desktop, wall, and rack mounting. Energy-saving technology reduces power consumption during low traffic periods, contributing to cost efficiency. With compliance to IEEE 802.3 standards and certifications like CE, FCC, and RoHS, the TEG1024D guarantees compatibility and safety. Whether for office networking, educational facilities, or community setups, the Tenda TEG1024D provides a cost-effective and reliable solution for high-speed wired connectivity..The Tenda TEG1024D features 24 auto-negotiation 10/100/1000 Mbps Ethernet ports, offering Gigabit Ethernet performance, and is classified as an unmanaged switch, providing plug-and-play functionality without the need for configuration..Supports a data transfer rate of up to 1 Gbps per port in full-duplex mode, allowing up to 2000 Mbps data transmission per port..Comes in a compact metal housing and supports desktop, wall, and rack-mountable installation options, providing flexibility for various deployment scenarios..The TEG1024D is a wired-only switch..The switch operates in store-and-forward mode, ensuring reliable data transfer. It has a switching capacity of 48 Gbps and a forwarding rate of 35.7 Mpps, enabling efficient throughput for high-traffic environments..Has a maximum power consumption of less than 12W and includes energy-saving features that reduce power consumption during periods of low network activity..Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x standards. It also meets CE, FCC, and RoHS certifications, ensuring compatibility and safety in various operating environments.

Upgrade the data paths of your local wired network to information superhighways with 16-port desktop Gigabit PoE switches..Address database size: 8000 MAC addresses.Total number of network ports: 16, number of PoE (RJ-45) ports: 8, number of PoE+ (RJ-45) ports: 8, port/expansion slot details: 16 x Gigabit ethernet network.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Performance: Bandwidth: 32 Gb/s.Status LEDs: Link, speed, activity, and PoE indicators.Form factor: Wall mountable, desktop.Layer supported: 2.Full line rate and forwarding rate of 64B frame at: 1.488 Mpps for 1000M port, 0.1488 Mpps for 100M port, 0.01488 Mpps for 10M port.Power: 54 VDC, 1.66 A, power consumption in idle/use (100% traffic): 4.52 W/11.31 W.Operating temperature: 0 - 50 deg C, operating humidity: 10 - 90% RH.Includes 16 port desktop Gigabit PoE switch, power adapter, quick start guide.Certifications and standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+), FCC Class A, CE.Warranty: Lifetime limited

The Allied Telesis™ AT-GS910/16-10 Gigabit unmanaged switch provides a simple solution to integrate 10, 100 and 100 Mbps devices to your existing network through its twisted-pair ports. It has 16 number of 10/100/1000Base-TX twisted-pair ports on the front panel for easy connection. The switch has an internal power supply with a single AC power supply socket on the rare panel. The eco-friendly feature automatically saves power consumption on each port, when the port is not connected. This switch mounts on desktop, wall or in a 19" equipment rack..Gigabit unmanaged switch has an internal power supply with a single AC power supply socket on the rare panel.Dimensions: 1.5"H x 10.4"W x 7"D.Compatibility: PC.Comes in gray color.Switching capacity: 32 Gbps.Interfaces/ports: 16 x RJ-45.Network and communication: 1000Base-T, Gigabit Ethernet.Power: 100 to 240 VAC, 50/60 Hz, 12 W, 0.3 A.Form factor: Desktop.Memory: 524KB flash, 524KB RAM.Jumbo frame support: 10KB, MAC address table size: 8K entries.Features flow control, loop guard, BPDU/EAP pass-through, full duplex flow control, auto-MDI/MDI-X on TX ports.Meets ICES Class A, UL60950-1, 2nd edition, CSA C22.2 No.60950-1-07, 2nd edition, IEC60950-1 (UL-EU, UL-CB), CE standards.Weight: 3.3 lbs.

This switch offers 5 standard Gigabit Ethernet ports designed for traditional networking capabilities. Each port operates on Gigabit Ethernet and 10/100/1000Base-T technologies accompanied by layer 2 support, ensuring your devices properly send and receive information quickly and accurately..Type of Ethernet Switch: Unmanaged Switch.No. & Type of Ports: 5-Port.System Management: Unmanaged.Rack-Mountable.Dimensions (W x D x H): 4.33 x 2.95 x 1.18".Power Consumption: 2.69 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable.Limited Lifetime Warranty.Expand your small business's network footprint with the 110 Series Unmanaged Ethernet Switch from Cisco.

This adaptable TRENDnet five-port gigabit GREENnet switch offers speed, high-bandwidth performance, and electrical efficiency. The tough metal unit is equipped with intelligent power-saving technology that adjusts its input voltage to match your networking needs. The result is an energy-efficient, economical switch with the capacity to make your LAN faster and easier to use..Package Contents: TEG-S50G 5-Port Gigabit GREENnet Ethernet Switch, Multi-Language Quick Installation Guide.Dimensions: 1.1" Height x 6.7" Width x 3.86" Depth.Input Voltage: 7.5V DC.Interfaces/Ports: 5 x RJ-45 10/100/1000Base-T LAN.Standard Warranty: 5 Year Limited.Weight: 15.17 oz.Number of Ports: 5.Gigabit Ethernet Port: Yes.Includes: 5-port gigabit GREENnet switch, multi-language quick installation guide.Auto-negotiation.Flow control.Store and forward switching architecture.Sturdy metal housing.TRENDnet Five-Port Gigabit GREENnet Switch - Local Area Network Device

The Tenda SG108M is an 8-port Gigabit Ethernet switch designed to deliver high-speed, reliable wired connections for small offices, home offices, or any network setup. With its unmanaged switch design, the SG108M offers plug-and-play installation, requiring no advanced configuration to get started. It supports auto-negotiating RJ-45 ports for 10/100/1000 Mbps speeds and features Auto-MDI/MDIX, ensuring seamless compatibility with various devices and cable types. The compact and lightweight design makes the SG108M ideal for both desktop and wall-mounted installations. Its 16 Gbps switching capacity and 11.9 Mpps forwarding rate provide a smooth and efficient data transfer experience, while the 802.1p QoS support ensures prioritized traffic for latency-sensitive applications like video streaming and online gaming. The switch also supports IGMP snooping, optimizing multicast traffic for bandwidth efficiency. Built with energy-saving features, including Energy-Efficient Ethernet (EEE) technology, the SG108M dynamically adjusts power consumption based on link status and cable length, reducing energy usage without compromising performance. Its durable housing and fanless design ensure quiet operation and long-term reliability. Whether expanding an existing network or setting up a new one, the Tenda SG108M delivers fast, stable, and easy-to-use connectivity for a variety of networking needs..The Tenda SG108M features 8 Gigabit Ethernet ports, delivering high-performance connectivity in an unmanaged switch design for effortless plug-and-play operation..Supports a maximum data transfer rate of 10/100/1000 Mbps per port, ensuring fast and stable wired connections for devices..Compact desktop form factor with an option for wall-mounting, providing flexibility in installation and space-saving capabilities..The Tenda SG108M does not include wireless connectivity, offering dedicated wired Ethernet connections only..This switch does not support Simple Network Management Protocol (SNMP), emphasizing simplicity and ease of use..Equipped with 802.1p Quality of Service (QoS) support, the switch prioritizes latency-sensitive traffic for applications such as video streaming and online gaming..Features Auto-MDI/MDIX for automatic detection of cable types and link status monitoring, providing secure and efficient system management..Delivers a throughput capacity of up to 16 Gbps with a forwarding rate of 11.9 Mpps, ensuring high-performance switching in unmanaged mode..Designed with Energy-Efficient Ethernet (EEE) technology, it reduces power consumption by dynamically adjusting based on link status and cable length..Complies with IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards, ensuring compatibility and reliable performance in diverse network environments.

The unmanaged switch offers gigabit speeds to minimize transfer times and greatly enhance the ability to stream high-bandwidth files to connected devices without interference. PoE support lets you deploy network systems such as wireless access, IP telephony, or video surveillance solutions more quickly and at a lower cost, without having to install separate power supplies for individual devices..8-ports 10/100/1000Base-T gigabit Ethernet.Address database size: 8000 entries.Unmanaged switch.Interface/ports: 4 x PoE (RJ-45), 4 x PoE+ (RJ-45).Layer supported: 2.Form factor: Desktop, wall mountable.Dimensions: 1"(H) x 8.3"(W) x 4.1"(D).Input voltage: 54 VDC.Power consumption: 7 W.Media type supported: Twisted pair.Temperature: 0 - 50 deg C, Humidity: 10 - 90 % non-condensing.Easy plug and play connection.Wired connection speed up-to 1000 Mbps.Includes 8-port desktop gigabit PoE switch, power adapter, quick start guide.Certifications and standards: FCC class A, CE, 802.3/U/x/ab/az/af/at.Weight: 1.23 lbs..Warranty: Lifetime limited

Five-port gigabit switch accelerates your performance and productivity when you send large files to network servers, drives and printers. Wired connection speed up to 1,000 Mbps minimizes transfer times and interference while streaming high-bandwidth files. Plug-and-play technology instantly extends your office network with a quick, easy installation. Auto-sensing ports automatically optimize the speed for each connected device. The auto power-down feature disables unused ports to maximize its efficiency..Address database size: 8000 MAC addresses.Total number of network ports: 5, number of network (RJ-45) ports: 5, port/expansion slot details: 5 x Gigabit ethernet network.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Performance: Bandwidth: 10 Gb/s, full line rate and forwarding rate of 64B frame at: 1.488 Mpps for 1000M port, 0.1488 Mpps for 100M port, 0.01488 Mpps for 10M port.Status LEDs: Link and activity indicators.Form factor: Desktop.Layer supported: 2.AC power: 100 - 240 VAC, 50/60 Hz, 12 VDC or 5 VDC, power consumption in iddle/use (100% traffic): 0.73 W/2.22 W.Operating temperature: 0 - 40 deg C, operating humidity: 10 - 90% RH.Certifications and standards: IEEE 802.3/3ab/3u/3x.Warranty: Lifetime limited

NETGEAR's unmanaged JGS524 switch makes it affordable to take Gigabit to the desktop. This unmanaged 10/100/1000 Gigabit Ethernet switch provides high-speed connectivity for small office networks at an economical price a savvy business owner can’t ignore. All 24 switched 10/100/1000 ports deliver up to 2000Mbps throughput, up to 48Gbps of backplane bandwidth, and Auto Uplink technology to adjust for straight-through or crossover cables. This high-performance switch can combine 10, 100 and 1000Mbps devices within a network, and is conveniently compact for either the desktop or rack mounting. Ideal for work groups, departments or any small network looking for the ultra fast desktop connections.;Features;24 10/100/1000 ports; Powerful, non-blocking backplane; Affordable enough for desktop connections; Flexible Auto Uplink Technology makes the right link; Rack mount kit included; Package Contents;24-port Gigabit Ethernet Switch JGS524;Power adapter; Installation guide; Rack-mount kit; Warranty/Support information card.24-port 10/100/1000BASE-T (RJ-45) Gigabit Ethernet unmanaged rack-mountable switch.Integrates 10, 100 and 1000 Mbps devices within a network.Silently delivers up to 2000 Mbps on each port.Certifications and standards: CE Class A, including EN 55022, (CISPR 22) and EN 55024, FCC Part 15 Class A, VCCI Class A, C-Tick Class A, KCC, CCC, UL, RU EAC.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

The TRENDnet TI-PG541I DIN-Rail mountable Ethernet switch has metal enclosure. It has 4 x Gigabit PoE+ 802.3at ports, 1 x Gigabit port and 1 x Gigabit SFP slot. This switch operates at a power rating of 130 W and features a switching capacity of 12 Gbps. It can withstand a high degree of vibration, shock and provides protection against ESD/EMI/surge. It operates within a wide temperature range for harsh environments. It includes LED indicators that show power, redundant power, alarm, SFP, PoE and network port status. It supports 1000Base-T and 1000Base-X network technologies for high performance..Gigabit Ethernet managed switch is ideal for deployment both at the core & the network edge to provide full gigabit speeds throughout the network.5 x gigabit Ethernet network, 1 x SFP.Management: CLI, HTTP web based GUI, SNMP v1, v2c, SNMP trap, RMON groups 1, 2, 3, 9, SNTP, SMTP alert, port mirror, storm control, traffic monitor.Data transfer rate: 10 Mbps (half-duplex), 20 Mbps (full-duplex) Ethernet, 100 Mbps (half-duplex), 200 Mbps fast Ethernet, 2000 Mbps gigabit Ethernet.Dimensions: 5.2"H x 5.3"W x 4.7"D.Power consumption: 10 W (max), 130 W (max.) with PoE+ fully loaded.Meets CE, FCC, Shock (IEC 60068-2-27), Freefall (IEC 60068-2-32), Vibration (IEC 60068-2-6) standards.Form factor: Rail-mountable.RAM buffer: 128MB.Network standards: IEEE 802.1p/802.1Q/802.3x/802.3z/802.3ab/802.3af/802.3at/802.3az.Media type supported: Optical fiber, twisted pair, network technology: 1000Base-T, 1000Base-X.Layer supported: 3.MAC address table: 8K entries, jumbo frames: 10 KB, MTBF: 180136 hours at 65 deg C, 435905 hours at 25 deg C.Includes: TI-PG541i, quick installation guide, CD-ROM (users guide).CLI and web based management, full power PoE+, wide operating temperature range, surge/ESD protection, dual redundant power inputs.Weight: 1.17 lbs..Comes with limited lifetime warranty

Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 1.1"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Tough metal case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty

Cisco Catalyst IE3300 Rugged Series switches deliver high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Rugged Gigabit Ethernet switch for a wide range of industrial applications where hardened products are required.This model has 8 x 10/100/1000 RJ45 copper ports, 2 x 100/1000 SFP uplinks, and expandable to up to 26 ports of GE by attaching one of eight compatible modules.Can be managed with powerful management tools such as Cisco DNA Center and Cisco Industrial Network Director, and a completely redesigned user-friendly modern GUI tool called WebUI.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 23W.Built for harsh environments and temperature ranges (-40 degrees Fahrenheit to 167 degrees Fahrenheit).Fanless, convection-cooled with no moving parts for extended durability.Hardened for vibration, shock and surge, and electrical noise immunity.Complies with multi-industry specifications for automation, ITS, and substation environments.Improves uptime, performance, and safety of industrial systems and equipment.Alarm I/O for monitoring and signaling to external equipment.Enables ultrahigh definition (UHD), PTZ IP cameras, programmable logic controllers (PLC) and Wi-Fi 6 access points.Delivers multiple rings and redundant ring topologies for new network configurations.Extends geographical scalability where longer-distance connectivity is required.SwapDrive for zero-configuration replacement.Full Flexible NetFlow (FNF) provides enhanced flow and threat visibility.IPv6 Ready Logo certified.Comes with Network Essentials perpetual license.5-year manufacturer limited warranty

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1/2.5/5GbE BASE-T PoE and 4 x 1/10/25/50G SPF ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 476Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 131-139W with JL086A, JL087A, JL670A PSU; switching capacity: 640Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Class 6 PoE ports supporting up to 60W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

The EX4100-F-12P, which is a compact, fanless switch offering 12 x 1GbE Power over Ethernet Plus (PoE+) access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter. EX4100-F-12P can also be powered from an external 90W power sourcing equipment (PSE) device connected via the uplink port. Additional 90W of PoE budget is available if the second uplink port is connected to a PSE device. With external power adapter and the two uplink ports connected to 90W external PSE, total PoE power budget supported is up to 300W..Managed switch with 12 x 10/100/1000BASE-T PoE+, 2 x 100Mb/1GbE/2.5GbE/5GbE/10GbE uplinks, 4 x 10GbE stacking/uplink ports, with Standard SW ports.The EX4100-F-12P fanless switch offering 12 x 1GbE PoE+ access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter.Features 256Gbps switching capacity.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Meets or exceeds the CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, and TAA standards.Onboard (day 0), provision (day 1), and manage (day 2+) the EX4100-F from the cloud with Juniper Mist Wired Assurance, using AI-driven automation and insights to deliver improved experiences for IT staff, end users, and connected devices.Streamline IT operations, reduce mean time to repair, and deliver a new generation of wired and wireless networks; the EX4100-F provides rich streaming telemetry data for insights into switch health and wired service-level expectations (SLEs) for pre- and post-connection metrics.Scale with ease, build resiliency, and streamline management with Virtual Chassis and EVPN-VXLAN-based campus fabrics, which help to simplify configuring and maintaining multiple devices.Standards-based micro segmentation using group-based policies (GBP) leverages underlying VXLAN technology to provide agnostic endpoint access control for consistent security policies and granular control of application, business function, or user tags.Take segmentation to the next level by separating traffic within the same VLAN so IoT devices or users can traverse any port or switch within the network; maintain the same security policies without having to manually configure them each time.Enables per-flow level analytics, so you can monitor thousands of traffic flows per switch without impacting the CPU.Dimensions: 1.75"H x 10.59"W x 9.66"D.Lifetime manufacturer limited warranty

The Aruba CX 6100 Switch Series is a modern family of entry level access switches perfect for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. This layer 2 switch series has convenient built-in high speed uplinks with up to 370W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs.With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements..Simplify IT operations with managed Gigabit Ethernet rack mountable switch that provides entry level, reliable, and convenient wired access connectivity.48 10/100/1000BASE-T port model with 4 convenient built-in 1/10 GbE SFP port uplinks and up to 370W of Class 4 PoE.Flexibility to manage and simplify configurations with Aruba Central, Aruba NetEdit, easy to use Web GUI, or industry standard CLI.Throughput: 98.6Mpps.Dimensions: 1.73"H x 17.4"W x 12"D.Power consumption: 30.6W idle, 45W without PoE, 480W with PoE.Using Aruba AOS-CX operating system across Aruba CX switching platforms and deployment domains provides a simpler, more consistent operator experience.Delivers Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.Simplifies ownership with no switch software licensing or subscriptions required.Designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption

The Aruba CX 6100 Switch Series is a modern family of entry level access switches perfect for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. This layer 2 switch series has convenient built-in high speed uplinks with up to 139W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs. A compact and fanless 12 port model is perfect for use in quiet work spaces. With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements..Simplify IT operations with managed Gigabit Ethernet rack mountable switch that provides entry level, reliable, and convenient wired access connectivity.12 10/100/1000BASE-T port model with 2 convenient built-in 1/10 GbE SFP port uplinks and up to 139W of Class 4 PoE.Flexibility to manage and simplify configurations with Aruba Central, Aruba NetEdit, easy to use Web GUI, or industry standard CLI.Throughput: 45.1 Mpps.Dimensions: 1.73"H x 10"W x 10.04"D.Power consumption: 16W idle, 21.9W without PoE, 170W with PoE.Using Aruba AOS-CX operating system across Aruba CX switching platforms and deployment domains provides a simpler, more consistent operator experience.Delivers Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.Simplifies ownership with no switch software licensing or subscriptions required.Designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption