30W PoE Injectors

Adds PoE Devices to Your LAN Without a PoE Switch: Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. Saves You Time and Money on Unnecessary Equipment Updates: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. Expand Your Wireless Network Up to 328 ft.: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges. Simple Plug-and-Play Installation Has Your Device Connected in Minutes: No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data. Designed for Installation Almost Anywhere: Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation. 3-Year Warranty and Environmentally Responsible Design: The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility..PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..Saves money by delivering 30W of power + data up to 328 ft. through existing cabling.Extends power + data to any PoE or PoE+ device installed where no AC outlet is available.Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps.Quick and easy plug-and-play installation with no configuration necessary.Compact, hand-sized plastic housing ready for mounting on any smooth surface

Maximum Output Power: 30 W.Form Factor: Desktop.Input Voltage: 24 V DC

Tenda PoE Injector 48V, IEEE802.3at Gigabit PoE Injector up to 30W, Compatible with IEEE 802.3af, RJ45 Port, Passive PoE 10 / 100Mbps, Distance Up to 100 Meters.High Speed Gigabit Ports Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port plus 1× Gigabit Ethernet Output port..802.3at/af PoE Compliant PoE30G-AT supplies power and data with one single ethernet cable to 802.3at/af PoE devices and expands network to areas with no power lines or outlets..Auto Detect Power With Auto Detect technology, PoE30G-AT determines and delivers the exact power supply to your devices with up to 30W power output..Long Range Transmission Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large area..Convert Non-PoE to PoE With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of PoE30G-AT..Plug and Play Installation no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios..Tenda's product comes with an industry-leading 5-year warranty, accompanied by complimentary lifetime dedicated technical support. Please feel free to contact us via phone or email.

The StarTech POEINJ4G black PoE+ injector helps to deliver power and data to four power over Ethernet devices using this wall-mountable PoE+ midspan hub. It supports 10/100/1000 Mbps networks/devices as well as auto-negotiation and auto-MDIX. Features flexible setup and comes with a desktop-sized or wall-mountable metal housing for durability. PoE+ injector automatically detects the powered device to offer the appropriate level of power output..PoE injector is perfect for powering a Wireless Access Point (WAP) in a business environment.Dimensions: 3.7"H x 2.8" W x 1"D.Compatible with IP cameras, IP phones and wireless access points.Comes in black color.Easily connect, power, and operate up to four gigabit PoE-powered devices (PD).Delivers full power to each port - up to 30.8 W (802.3at) or 15.4 W (802.3af) to each connected device.Flexible setup, with a desktop-sized, or wall mountable metal housing for user convenience.Plug and-play setup for reliable operation.Automatically detects the powered device to provide the appropriate level of power output.Circuit protection prevents power interference between each port.Support for 10/100/1000 Mbps networks and devices, as well as Auto-Negotiation and auto MDIX.Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection is not available.Has 8 - RJ-45 female connectors, 4 ports and 1 power/4 PoE in-use LED indicators.Power supply: 100 -240VAC (input), 52VDC (output ), Current: 2-1A (input), 2.31A (output), Power consumption: 120W max, Power output: 52VDC at 30.8W.Temperature: -10 - 70 deg C (storage), 0 - 50 deg C (operating), Humidity: 5 - 95% RH (non-condensing).Includes 1 x 4-port gigabit PoE+ Injector, 1 x universal power adapter, 3 x power cords (NA/UK/EU), instruction manual.Meets RoHS compliant, FC, CE certification and standards.Weight: 7.2 oz.Comes with 2 years warranty.The StarTech black PoE+ injector is suitable for almost all PoE device classes, including wireless access points, as well as IP phones and cameras.

Power Up Your Network with TP-Link POE160S PoE+ Injector Enhance your network's efficiency and reach with the TP-Link POE160S PoE+ Injector. Designed to comply with IEEE 802.3af/at standards, this powerful injector delivers up to 30 W of power, making it perfect for powering devices like access points, IP cameras, and IP phones. With its plug-and-play installation, you can easily expand your network without the need for additional power lines or outlets. Key Features: Gigabit Ports: Enjoy faster data transmission with two Gigabit Ethernet ports, ensuring seamless connectivity for your devices. High Power Output: Supplies up to 30 W of power, automatically adjusting to meet the needs of your connected devices. Cost-Effective Solution: Reduce infrastructure costs by transmitting data and power simultaneously over a single Ethernet cable. Versatile Installation: The wall-mounting and desktop design accommodate various installation scenarios, providing flexibility for your network setup. Plug & Play: Easy installation with no configuration required, allowing you to quickly and effortlessly expand your network. Reliable Performance: Complies with IEEE 802.3af/at standards, ensuring compatibility with a wide range of PoE devices. Whether you're setting up a new network or upgrading an existing one, the TP-Link POE160S PoE+ Injector is the perfect solution for delivering power and data efficiently and reliably. Trust TP-Link to power your network with ease and efficiency..This PoE Injector is ideal for expanding your network to areas without power lines or outlets, supporting devices like access points, IP cameras, and IP phones..Compatible with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) or PoE Splitters, such as TP-Link's POE10R (TL-POE10R), or other equivalent products..The injector measures 4.9 x 2.3 x 1.4 inches, making it compact and easy to install in various settings..The device comes in black and is made of durable materials to ensure long-lasting performance..The TP-Link POE160S PoE+ Injector is sold individually, providing one unit per purchase.

The TP-LINK PoE+ Injector TL-POE160S fully complies with IEEE 802.3af/at standards and can work with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) and PoE receiver adapters (such as TP-LINK's TL-POE10R or other equivalent product) to expand your network to where there are no power line or outlet, where you wish to fix a device such as AP, IP Camera or IP Phone, and more..PoE+ injector reduces infrastructure costs by transmitting data and power simultaneously via Ethernet cable.Works with all IEEE 802.3af/at PoE compliant powered devices and PoE receiver adapters.Comes in black.Two Gigabit ports ensure faster transmission.Complies with IEEE802.3af/at standards, supplies up to 30W.Automatically determines and supplies the exact power to meet the device's needs.Can be mounted on a wall or positioned on a desktop, accommodating most installation scenarios.Plug-and-play design requires no installation or configuration.Features an integrated power supply

The Logitech PoE Injector with Plug Set (952-000074) is a high-performance Power over Ethernet solution tailored specifically for powering Logitech Tap meeting room touch controllers. By delivering both data and power over a single Ethernet cable, it allows for cleaner installations, eliminating the need for separate power adapters and reducing cable clutter. The injector complies with IEEE 802.3af/at standards, providing up to 30W of reliable power, and includes an international plug set for global deployment. Whether used in corporate boardrooms or collaborative spaces, this PoE injector ensures seamless and professional AV integration. It's also compliant with energy and environmental standards like RoHS and WEEE, making it a dependable and eco-conscious choice for modern workplaces..Simplified Cabling for Logitech Tap: Delivers both power and data over a single Cat5e cable, eliminating the need for a separate power outlet at the table.Extended Reach: Supports cable runs up to 131.23 ft (40 meters), allowing flexible placement of Logitech Tap in larger or uniquely configured meeting rooms.Clean and Professional Installations: Reduces cable clutter with precise cable lengths and compatibility with all Logitech Tap mounts, including Table, Riser, and Wall Mounts.Plug-and-Play Integration: Designed specifically for Logitech Tap, ensuring seamless connectivity and reliable performance in any meeting room setup.Included 10m Cable: Comes with a 32.81 ft (10 meters) Cat5e cable, or use your own for custom-length installations.Universal Power Supply: Includes a 100–240V auto-switching power supply with international adapters for global deployment.Ideal for Modern Conference Rooms: Perfect for Microsoft Teams Rooms, Zoom Rooms, and Google Meet setups requiring clean, efficient cable management

Cisco™ AIR-PWRINJ6= 100 Mbps Power PoE Injector for Aironet 1810 Series Access Point.PoE injector is ideal to use with access points.Dimensions: 1.28"H x 2.09"W x 5.5"D.Compatible with Cisco Aironet 2800 series and 3800 series access points.Connectors: RJ-45, EIA 568A and 568B.Data transfer rate: 10/100/100 Mbps.Power: 30 W (user port), 100 - 240 VAC, 0.67 A, 50 - 60 Hz (input), 55 VDC (output).Reliability: MTBF 100000 hrs at 25 deg C.Thermal rating: 20 BTU/Hr at 240 VAC.Temperature: -4 to 104 deg F (operating), 4 to 158 deg F (storage), 90 % relative humidity.Meets China RoHS, IEEE 802.3, WEEE, CE, FCC, VCCI, UL, IEC/EN certifications and standards.Weight: 0.44 lbs..100 Mbps PoE injector provides up to 30 W and is compliant with IEEE 802.3af systems, for use with the Cisco Aironet 2800 series and 3800 series access points.

The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch-use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations..Dimensions: 1.4"(H) x 5.2"(W) x 2.5"(D).Features network distances of up-to 328'.Input ports: 1 x RJ-45 10/100/1000Base-T.Output ports: 1 x RJ-45 10/100/1000Base-T.Input voltage: 110/220 VAC, 50/60 Hz.Input current: 650 mA.Output power: 30 W maximum.Form factor: External.Full duplex gigabit speeds, converts a non-PoE ethernet port-to a PoE+ or PoE port.Integrated power supply.Includes gigabit PoE+ injector, quick installation guide, power cord.Certifications and standards: CE, FCC, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, Green compliance certificate/authority: RoHS, WEEE.Weight: 5.70 oz..Warranty: 3 years limited.TRENDnet® Full duplex Ethernet speed gigabit PoE+ injector features network distances of up-to 328'.

Startech.com Black power over Ethernet injector offers data connectivity over standard ethernet cable for longer distances. Injector can be used to power PoE-enabled devices where there is no electrical outlet..1000Mbps/IEEE 802.3af PoE/IEEE 802.3at PoE+/IEEE 802.3 10Base-T/IEEE 802.3u100Base-TX/IEEE 802.3 1000Base-T.2 x RJ-45 10/100/1000Base-T LAN port.Perfect solution for applications where an electrical outlet may not be available.Color: Black, enclosure: Plastic.Interfaces/ports: 1 x input port.Power supply: Input voltage: 100 - 240 VDC, output voltage: 48 VDC, input current: 0.75 A, output power: 30 W per port, frequency: 50 -60 Hz.Form factor: Wall mountable.Dimensions: 1"(H) x 2.5"(W) x 2.8"(L).Temperature: 0 - 45 deg C operating, -20 - 85 deg C storage, humidity: 10 - 90%(non-condensing).LED indicators: 1 x device power indicator.Center tip polarity: Positive, Plug type: M.Injector adapter can be used to power PoE-enabled devices such as IP cameras or wireless access points (WAPs).Includes POE+ injector, 4 x mounting screws, universal power adapter, 3 x power cords, instruction manual.Compliance: FCC, CE, RoHS.Weight: 1.8 oz..Warranty: 2 years limited.Startech.com Black power over Ethernet injector connects an individual PoE powered device to a non-PoE LAN switch with its 10/100/1000Mbps port.

AXIS 30 W Midspan is a one-port midspan that can deliver up to 30W to one network device. It is IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant, which ensures compatibility with most Axis network products with built-in PoE..One-port midspan that can deliver up to 30W to one network device.Comes in black.IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant, which ensures compatibility with most Axis network products with built-in PoE.With a single network cable, this PoE midspan injects power to the network device with built-in PoE support and enables data communication between the device and the switch.No need to replace existing Ethernet switches and cabling infrastructure.240VAC, for indoor use.3-year manufacturer limited warranty

Power supply for Poly Trio C60 smart conference phone..Power Supply with power cord and CAT-5 cable.Includes 100-240V, 1.0A, 55V/30W, IEEE 802.3at compliant mid-span power injector for 10/100/1000 Mbps Ethernet..6' Power cord & 7' Ethernet cable.Black.What's In The Box: Poly Trio C60 Power Kit (Poly 2200-86680-001 or HP 85X030AA#ABA)A/C Power kit for Poly Trio C60 Conference phone.6ft power cord,7ft Ethernet cable.Poly Trio C60 Power Supply with Power Cord and CAT5 (85X03AA) - VoIP - IEEE 802.11a/b/g/n/ac - 2 x Network (RJ-45) - PoE Ports