Cat 5 Cable Testers
6 results
The Tripp Lite T012-001-K multi-function cable tester in gray color, includes wire tracker and tone generator for tracking cable, locating a short or breakage in a non-powered wires and mapping RJ45 wire. It has LED flashlight on remote probe unit for poking around dark areas, headset for working in noisy area and volume control button for fine tune. It has 9V batteries and is suitable for cable installers working in telecom or LAN environments..Multi-function cable tester comes with wire tracker and tone generator.Interface: Network (RJ-45).Battery size: 9V, number of batteries supported: 2.Media type supported: Twisted pair, optical fiber, coaxial.Device function: Cable signal testing, cable tracing, LAN cable testing, optical power testing, short circuit testing, open circuit testing, wiremap.Device function: Coaxial cable testing, network testing.Essential tool for telecom/LAN personnel: Find RJ-11, RJ-45 cable among group of cables, find short or breakage in non-powered wires.Perform wire mapping on RJ-45 cables, detecting shorts and open wires.LED flashlight for poking around dark areas, headphones for working in noisy environments.Volume control for fine-tuning the tone generator, powered by included 9V batteries, stores away in convenient carrying case.Includes main tester, remote probe unit, RJ-45/RJ-11 jumper cable, alligator clip adapter, headphones, 2 x 9 V batteries, carrying case, owner manual.Green, RoHS compliant.Comes with 1 year limited warranty
The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC
The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC
The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand..Cable analyzer enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system.Cable analyzer dimensions: 11"H x 5.25"W x 2.63"D.Made of high-impact plastic with shock-absorbing overmold, comes in yellow.Kit includes: versiv mainframe & remote, two DSX-5000 CableAnalyzer modules, set of Cat 6A/Class EA permanent link adapters, set of Cat 6A/Class EA channel adapters, two headsets, two handstrap, two shoulder straps, carry case, USB interface cable, versiv open source software CD, two AC chargers, two universal couplers, integrated Wi-Fi, Statement of calibration and getting started guide.Works on 1000MHz maximum frequency.Standard link interface adapters: shielded RJ45, Tera, GG45.Supported test parameters: wire map, length, propagation delay, delay skew, dc loop resistance, pair-to-pair resistance unbalance, pair resistance unbalance, insertion loss, return loss, common mode return loss, near end crosstalk, far end crosstalk, attenuation-to-crosstalk ratio, acr-f, power sum acr-f/next/acr-n/alien next/alien attenuation next ratio far end, common mode to differential mode next,transverse conversion loss, equal level transverse conversion transfer loss.5.7" LCD with a projected-capacitance touch screen allows for quick tester setup with easily selectable cable types, standards, and testing parameters.Versiv enables users to accomplish more than ever before with a cable tester, by accelerating every step of the testing process.LinkWare Live cloud service lets the project manager remotely set up the testers and monitor job progress and even location from any smart device.ProjX management system eases tasks from initial setup of a job to system acceptance, it eliminates redundant steps and ensures that all tests are completed correctly the first time, and every time.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.LinkWare PC management software provides unmatched analysis of test results and professional test reports.The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem.Integrated Wi-Fi allows you to easily upload results to LinkWare Live.Meets or exceeds ANSI/TIA-568.2-D, ISO/IEC standards
The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down - setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand. As part of the Versiv cabling certification product family, the DSX CableAnalyzer Series copper cable certifiers provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between being profitable or not is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level VI/2G accuracy, making jobs easier to manage, and getting to system acceptance faster. It's not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects..Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards.ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.Taptive™ user interface simplifies set-up, and eliminates errors.Analyze test results and create professional test reports using LinkWare™ management software.Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting.Intertek Verified to TIA Level 2G - the most stringent accuracy requirement.Copper cable certifiers endorsed by cabling vendors worldwide.Built in Alien Crosstalk testing capability.Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software.
The LinkMaster PRO tester enables installers, contractors and maintenance technicians to map, test and troubleshoot data and voice communication cable and coax runs..Interfaces/ports: 2 x RJ 45.Dimension: 3.3"(H) x 2"(W) x 1.3"(D).Test wiring configuration on UTP and STP.Tests unshielded and shielded modular plugs.Check for shorts, miss wires, reversals and split pairs.Debug feature, automatic shut off and low battery LED indicator.Battery size supported: AA.Designed to test installed twisted pair wiring.Device function: Open circuit testing, short circuit testing, split pair testing.Main unit and remote allow one person testing.Open there is no "open" LED indication, a typical cable may have 2, 3, or 4 pairs, opens are displayed as an unlit LED.User will determine if a pair is present and continuous or OPEN by comparing the illuminated LEDs to the expected number of pairs that should be good.Short - a short circuit condition exists.Split pairs - split pairs occur when the tip (positive conductor) and ring (negative conductor) of two twisted pairs are interchanged.Pass indicators: Four green LEDs on pairs 1 2, 3 6, 4 5, and 7 8. All four pairs are terminated correctly, two green LEDs on pairs 3 6, and 4 5. Both pairs terminated correctly, yowl green LEDs on pairs 1 2, and 3 6. Both pairs terminated correctly.Green shield LED indicates the shield on the cable is correctly and continuously wired through the modular plug termination.Weight: 2 lbs..⚠ WARNING: Cancer and Reproductive Harm - WWW.P65warnings.ca.gov.Ideal LinkMaster PRO - Test Twisted-Pair Wiring
You May Also Like
Classic style and modern materials join together to give you a year-round place relax and unwind in your home or business with this set of 2 stackable patio chairs. The weather and rust resistant steel frames, paired with poly resin slats on the backs and seats allow you to leave these chairs outdoors all year long making them ideal for commercial outdoor dining areas as well as your patio. Capable of supporting up to 400 lbs. static weight per chair, these chairs are also stackable up to 8 chairs high for storage or flooring maintenance and feature fixed floor glides to protect your indoor flooring surfaces. For your convenience, these chairs arrive fully assembled and wipe clean easily with a damp cloth..Metal/Wood Restaurant Chairs.Overall Dimensions: 22.5"W x 21.5"D x 34.25"H.Color: Black; Material: Polypropylene, Polystyrene, Steel.Rated for Commercial Use.Set of 2 Commercial Grade Stackable Patio Club Chairs.Black Poly Resin Slatted Backs and Seats.Black E-Coated Steel Frames Will Not Rust.Supports up to 400 LBS. Static Weight Per Chair.Recommended Stack Height up to 8 Chairs High.Suitable for Indoor or Outdoor Use.Fixed Floor Glides Prevent Damage to Hard Indoor Flooring Surfaces.No Assembly Required.Wipe Clean with a Damp Cloth.Provide on-trend, comfortable seating for patrons or family and friends indoors or outside with this set of 2 stackable all-weather patio club chairs.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: Gray; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.Light Gray Frames with Gray Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.
Bring the indoors outside and make the most of your patio, deck, or green space with these faux teak patio side chairs. Patrons love to dine al fresco, and these all-weather dining chairs won't disappoint. Synthetic gray wash faux teak slats contrast beautifully with the black metal frames and blend seamlessly in almost any decor. The 12 gauge aluminum frames feature welded construction that holds up to 300 lbs. static weight capacity. Powder coating helps resist nicks and scratches, and these chairs are weather-resistant for year-round use though care should be taken to protect from prolonged periods of wet weather. These outdoor stacking chairs arrive fully assembled and may be stacked up to 8 high for storage or floor care. Clean your new dining chairs with a damp cloth to maintain its great looks. Fixed glides will maintain the appearance of your hard flooring surfaces when being used indoors..Teak Chairs.Overall Dimensions: 22.5"W x 20.75"D x 33.75"H.Color: Gray Wash Teak; Material: Aluminum, Steel, Thermoplastic.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Fully Assembled Stackable Outdoor Patio Dining Chairs.Strong Synthetic Gray Wash Poly Slat Backs, Seats and Accented Arms won't rot, chip, or peel.Powder Coated Aluminum Frames are rust and weather resistant.Lightweight Frames Stack Up To 8 high for storage or floor maintenance.300 lb. Seating Capacity accommodates most users.Back Size: 18.5"W x 18"H; Seat Size: 16.25"W x 18"D x 17"H.Plastic Floor Glides protect hard flooring surfaces when used indoors.Easily Cleaned with a Water Based Cleaner.All-purpose stackable dining chair ideal for restaurant, deli, coffee house, or home use.Give your home or venue a timeless elegance that will last for years to come with this all-weather dining side chair.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: Slate Gray/Cream; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.Slate Gray Frames with Cream Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: Teak/Cream; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.Teak Frames with Cream Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.
Create the perfect space for relaxing evenings and great conversations with this faux teak outdoor patio table. This beautiful square outdoor table boasts a slatted poly top and strong steel frame capable of holding up to 150 lbs. static weight capacity. This faux teak patio table is weather and rust resistant so you won't need to move it or put it away when the seasons change. Assembly is easy so you can start enjoying as soon as possible. The faux teak slats pair nicely with the black powder coated frame finish to create a sophisticated look for your outdoor space. Adjustable plastic floor glides will allow ease of movement and spills clean up easily with a water based cleaner making this bistro patio table very low maintenance. Complete the set by adding our outdoor faux teak side chair and make the most of your evenings and weekends..Teak Tables.Overall Dimensions: 30"W x 30"D x 30"H.Color: Gray Wash Teak; Material: Steel, Thermoplastic.ANSI/BIFMA Certified; Rated for Commercial Use.Outdoor Patio Dining Table with dining for 4.Gray wash poly slat top made of strong synthetic teak.Easily cleaned with a water based cleaner.Weather and rust resistant for durability.150 lb. Weight Capacity.Black Powder Coated Steel Frame with Protective Adjustable Floor Glides.Assembles in 10 minutes or less for quick use.Relax comfortably at your favorite restaurant, eatery or on your patio or deck with this attractive outdoor patio dining table..Relax and unwind at the end of the day with this outdoor table.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: Red/Cream; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.Red Frames with Cream Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.
Reimagine your outdoor space with set of 2 stylish, durable patio chairs for soaking up the summer sun or relaxing at the end of the day. The woven wicker rattan is not only beautiful, it is waterproof and lightweight allowing you move these chairs from indoors to outside as often as you like. Plush all-weather cushions and integrated armrests add to the luxurious look and feel of these chairs and the galvanized steel tube frames feature adjustable floor glides to protect indoor flooring surfaces. Assembly takes less than 10 minutes per chair and they clean easily with a damp cloth. The removable, all-weather cushion covers may be machine washed for a deeper clean. Supporting up to 400 lbs. static weight per chair, these indoor/outdoor chairs will be a welcome addition to any space..Rattan Patio Seating.Overall Dimensions: 28.25"W x 28"D x 28"H.Color: Natural/Gray; Material: Fabric, Foam, Galvanized Steel, Polyester, Rattan.Boho Indoor/Outdoor Faux Rattan Wicker Patio Chairs, Set of 2.Natural Open Weave Faux Rattan Wicker Rope Back and Seat.Integrated Slanted Armrests.Gray All-Weather Cushions with Machine Washable Removable Covers.Galvanized Steel Tube Frames with Adjustable Floor Glides.Supports up to 400 LBS. Static Weight Per Chair.Wipe Clean with a Damp Cloth.Quick and Easy Assembly with Included Materials.Rest and relaxation is yours with this set of 2 indoor/outdoor patio chairs with removable all-weather cushions.
Take cocktail hour up a notch at your venue with this set of 4 bar tables with smooth designer looking tops. Perfect for storing many, the tops flip up with a touch of a button and are easy to clean. Transport with ease as these bar height dining tables have lightweight aluminum bases to quickly move indoor and outdoors for your events. Create a formal setting by covering these tables in long table covers or use as is outdoors on the patio. With seating for two per table, you can pair with two aluminum bar chairs or have guests stand around the tables with a drink while they wait to be seated. When using outdoors, care should be taken to protect from long periods of wet weather..Aluminum Patio Bar Tables.Overall Dimensions: 23.25"W x 23.25"D x 45"H.Color: Aluminum; Material: Aluminum, Plastic, Stainless Steel.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 4 Round Bar Tables for Indoor or Outdoor Use.Smooth Stainless Steel Table Tops.Push Button Folding Tops.Aluminum Columns and Bases.Base Size (4): 25.75"W.Plastic Floor Glides protect floor from scratches.Lightweight for storage and portability.Designed for Commercial and Residential Use.Folding tables for cocktail hour, hospitality facilities, banquet halls, and kitchen.Furnish your event venue with this set of 4 aluminum patio tables that will remain a constant in design.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: Teak/Teal; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.Teak Frames with Teal Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.
Modern style and materials combine to form this stunning all-weather, 5 piece patio set featuring 4 stackable patio chairs and a square table ideal for home or business use. The weather and rust resistant steel chair frames boast vertical slat backs and are paired with poly resin slats on the seats for year-round use perfect for commercial outdoor dining areas as well as your backyard and stack up to 8 chairs high for storage. Underseat cross bracing makes these chairs capable of supporting up to 400 lbs. static weight capacity each. The matching table is also rust resistant, has cross bracing, and a poly resin slatted top that won't rot, chip, or peel. All pieces boast fixed floor glides to prevent damage to indoor flooring. The chairs arrive fully assembled while the table assembles in 10 minutes or less. Cleanup is quick and easy with a damp cloth..Metal Patio Table and Chair Sets.Overall Dimensions: 31.5"W x 31.75"D x 28.25"H.Color: Black; Material: Polypropylene, Polystyrene, Steel.Rated for Commercial Use.Modern 5 Piece Commercial Grade Table and Chairs Set.Black E-Coated Metal Frames.Vertical Slat Back Chairs with Integrated Arms.Recommended Chair Stack Height is 8 Chairs High.Each Chair Holds up to 400 LBS. Static Weight Capacity.31.5" Square Dining Table Seats up to 4 Adults.Poly Resin Slatted Seats and Tabletop Won't Rot, Chip, or Peel.Fixed Floor Glides on All Pieces Protect Indoor Flooring Surfaces.Chairs Ship Fully Assembled, Table Assembles in 10 Minutes or Less.Wipe Clean with a Damp Cloth.Add on-trend seating to your residential or commercial dining spaces with this 5 piece metal and poly resin seating set.
Take relaxation anywhere you want to be with this set of 2 folding all-weather adirondack chairs with cushions. Featuring generously padded back and seat cushions, these chairs are the ultimate in relaxation. Whether your favorite spot is the beach, a campsite, or your own back yard the ability to fold these loungers makes them easier to transport and also makes storage a breeze. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 30.25"W x 34"D x 37"H.Color: White/Teal; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Folding Poly Resin Adirondack Chairs with Cushions.White Frames with Teal Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Folding Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Recline in comfort at the place of your choosing with this set of 2 folding Adirondack chairs with padded back and seat cushions.
Create upscale lounge areas outdoors on your bar or hotel patio or the back deck at home with this all-weather C stand that supports your favorite hanging chairs. Whether you choose egg chairs, macrame chairs, or hammock chairs, the heavy duty offset steel base will accommodate them all. Ideal for indoor areas as well, this heavy duty stand will supports up to 300 lbs. static weight for kids hanging tents, sensory swings, and nest chairs in your child's bedroom or playroom. Durably constructed from powder coated galvanized steel and boasting a wide, X-shaped base, this hanging chair stand provides greater stability for reliable support and allows 360° rotation for easy conversations. With the included hanging hardware and an assembly time of less than 30 minutes, your guests will be relaxing in no time at all. Wipe clean with a damp for easy upkeep..Hammock Stands.Overall Dimensions: 36.5"W x 38.5"D x 80"H.Color: Black; Material: Steel.Commercial Grade Hanging Chair C-Stand.Offset Swing Arm with Steel Hook.Crisscross Base for Maximum Stability.Powder Coated Steel Frame for Indoor/Outdoor Use.Holds up to 300 LBS. Static Weight.Assembles in Under 30 Minutes with Included Tools and Instructions.Wipe Clean with a Damp Cloth.Enjoy your choice of hanging chairs in any home or business space with this commercial grade c stand.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: Blue; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.Blue Frames with Blue Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: White/Teal; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.White Frames with Teal Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.
If you're looking for attractive seating that will allow you to relax and unwind then search no more. The classic design of this set of 2 adirondack chairs, boasting an extra wide back and arms, has stood the test of time and will make a lovely addition to any space. Featuring generously padded back and seat cushions, this seating set will quickly become your "go to" spot indoors or outside. This set of colorful lawn chairs mimics the look of real wood but won't rot, chip, or peel and is UV protected to help retain its great looks. Constructed of weather-resistant polystyrene, these chairs are designed to hold up in many environments and are strong enough to accommodate users up to 350 pounds. Best of all, these adirondack loungers can be easily cleaned with water and a neutral detergent while the cushions can be wiped clean with a damp cloth or remove the zippered covers to hand wash and air dry for a deeper clean. An elastic strap on the cushion back ensures they stay in place. This 2 pack of all-weather adirondack chairs with cushions beckons you to curl up, de-stress and let go of the day..Adirondack Chairs.Overall Dimensions: 29.5"W x 33.5"D x 35"H.Color: Slate Gray/Gray; Material: Fabric, Olefin, Polypropylene, Polystyrene.ANSI/BIFMA Certified; Rated for Commercial Use.Set of 2 Classic Poly Resin Adirondack Chairs with Cushions.Slate Gray Frames with Gray Padded Cushions.Extra Wide Back and Arms.Ultra-Strong Polystyrene Frames Hold up to 350 LBS. Static Weight.Will Not Rot, Peel, or Chip and Does Not Require Sanding or Painting.All-Weather Fabric Cushions with Zippered Removable Covers.2 Inch Thick Back and Seat Padding.Rear Elastic Straps Hold Cushions In Place.Chairs Assemble Quickly and Easily and May Be Cleaned with Water and a Neutral Detergent.Wipe Cushion Covers Clean with a Damp Cloth or Remove to Hand Wash and Air Dry.Relax in cushioned comfort in this set of 2 classic Adirondack chairs with padded back and seat cushions.