Coaxial Amplifiers

Pyle® 1000 Watt power amplifier has fault LEDs that illuminate when the amplifier is aware of any problems. Amplifier also features signal activity LEDs that illuminates when the output signal level exceeds 1 volt..Two channels A/B-bridgeable.Inputs: Electronic balanced; barrier strip, xLR, TRS 1/4".Speaker terminal: Speakons for Ch A, Ch B and bridge; binding post.Cooling fan two-speed DC fan, air flow back to front.110 -220 V switchable.2 x 5 LED indicator red, DDT/cipping; yellow, signal; green, power.Overload and protection indicator.Signal/noise ratio: 102 dB, Distortion: 1.0percent.Frequency response: 20Hz to 20 KHz >+or-0.5dB.Input impedance: balance 20Khz, input level: +4 dB.Warranty: 1 year.Pyle® 1000 Watt power amplifier has a built in fan cooling system to disperse heat and allow ideal operation.

Pyle Home PFA200 60-Watt Class-T Hi-Fi Audio Amp.12V AC/DC adapter.Class-T circuit design.Microphone input.Speaker imp: 2O–8O.3.5 mm aux input.Signal-to-noise ratio: >80dB.Total output power: 60W.Input power: 9V–14.4V, 2A DC.Total harmonic distortion:.Freq resp: 20Hz–20kHz.Short circuit, overload & overheat protection.Dim: 5.51"H x 4.8"W x 1.81"D

Now that wearing a mask is the established normal, being clearly heard is a constant struggle. Hamilton Buhl Amp-Up makes it easy to be heard without straining your voice. With its lightweight design, long battery life, and clear, crisp amplification, the amplifier is a winner and a must-have for teachers, coaches, receptionists, retail associates, pharmacists, and others. Hamilton Buhl Amp-Up has top-mounted button/dial controls, making it easy to adjust the sound volume, change to different modes, and turn the unit on and off. Hamilton Buhl Amp-Up boasts a multichannel feature that allows up to 40 different PA-25W devices to be paired and operated simultaneously near each other. The amplifier also has an auto pairing feature, which will automatically pair to an available channel to avoid interference when using multiple units. Using Bluetooth technology, you can stream audio/music content from your Bluetooth-enabled device. Also, play content from a USB/TF card or via the aux-in port..Personal UHF voice amplifier with wireless headworn microphone delivers voice amplification that's perfect for classrooms, conference rooms, small gatherings, and more.Output power: 25W maximum/15W rms.Powered by a built-in 7.4V/2000mAh lithium-ion battery with up to 11 hours of battery life.Frequency response: 90Hz-18KHz.Weight: 1.45 lbs..Dimensions: 4.8"H x 3.9"W x 1.9"D.Supports up to 40 devices paired/operated near each other, without any conflicts.Automatically pairs with an available channel to avoid interference.Features a durable and wear-resistant ABS plastic housing in black.Playback from any Bluetooth-enabled device, USB/TF card, or via the aux-in port.Supports a memory media card up to 32GB, which can store approximately 500 hours of voice data.Easy-to-read LCD screen.Comes with a UHF wireless headworn microphone, a carrying strap, and a waistband hook for hands-free use.1-year manufacturer limited warranty

The CDi Series amplifiers are professional tools designed and built for installed sound applications. Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user-defined DSP presets are available..Two-channel power amplifier is a professional tool designed and built for installed sound applications.70Vrms/140Vrms outputs.Accurate, uncolored sound with very low distortion for the best in music and voice reproduction.Onboard digital signal processing (DSP) includes crossovers, EQ filters, delay, and output limiting.Features intuitive front-panel LCD screen for quick, easy configuration.Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads, and internal faults.Switch-mode universal power supply

The JBL CSA 280Z Audio Amplifier (2x 80W) provides a compact and powerful amplification solution for installed applications. The unit utilizes a universal switch-mode power supply and Crown's DriveCore technology to deliver reliable and efficient sound amplification..1 or 2 output channels with 40W, 80W, 120W per channel.Built-in 70V and 100V.Fanless, space-saving 1U design.Sleep mode disable function.Energy-efficient amplifier.Sleek industrial look with illuminated rings making knobs easy to see and use

Unity 200-Watt Bridgeable Power Amp.Comfortable Key Action.Ideal key layout.Simple Wired Operation.1 year replacement warranty

AC266 is a compact 2-way full-range loudspeaker system comprised of one 310 mm (12 in) low frequency driver and one 25 mm (1 in) exit/35 mm (1.5 in) voice-coil compression driver. The horn provides 60° by 60° coverage in vertical and horizontal orientation..12-inch wired 2-way passive loudspeaker built for fixed installation setups.AES-rated power handling of 350W continuous and 1400W peak, and an IEC-rated power of 250W continuous, 500W program, and 1000W peak.60° x 60° Waveguide with a 25 mm (1 in) exit 35mm (1.5") diaphragm compression driver.Dual Neutrik NL4 connectors plus screw terminals.Frequency response of 80 Hz to 18 kHz (±3 dB) and a broader frequency range of 63 Hz to 20 kHz (-10 dB).Robust 15mm enclosure with black textured finish.Weighs approximately 38.36 pounds.Dimensions (H x W x D): 23.6" x 14.6" x 15.43"

The white AM7215/26 2-Way 15" Loudspeaker System from JBL is a high-power, lightweight, 2-way, full range loudspeaker. It is comprised of the JBL Differential Drive, dual voice coil and dual magnetic gap 2265H (15") low frequency driver, and 2432H high frequency 1.5" exit, 3" voice-coil compression driver. The large format Progressive Transition (PT) waveguide provides a 120 x 60° coverage..Wired 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience.Delivers 600 watts RMS and 2400 watts peak output power.Provides a wide projection range with a 120° x 60° coverage pattern.Hear every detail crisp and clear with a frequency response of 40 Hz-18 kHz.8 Ohm impedance extracts maximum power so you will get more output from your speakers.15" woofer driver size allows better stereo imaging with maximum sound feasibility.1.50" tweeter driver size provides crispier, well-detailed sound with maximum productivity.96 dB sensitivity for efficient conversion of power into sound to produce adequate audio output.30.8" height for maximum coverage efficiency and feasible operation.Dimensions (H x W x D): 30.8" x 16.5" x 19.80".5-Year Limited Warranty

The Pyle 200-Watt Bluetooth Stereo Amp Receiver with USB & SD Card Readers is the perfect solution for all your audio needs. Using the latest sound amplification technology, this versatile system is designed to perform and deliver clear, accurate sound. It's loaded with plenty of audio playback options along with a wide range of device compatibility, so you can connect and play it all. The compact receiver features Bluetooth wireless streaming that works with all your favorite devices. Enjoy versatile and wireless audio streaming ability with this receiver..200W @ 4ohm max, 100W x 2 @ 8ohm RMS.Bluetooth.FM radio with LCD digital display.USB & SD Card readers.Freq resp: 20Hz–20kHz.Track/folder music search control knob.Microphone, aux & RCA inputs.Banana plug speaker & RCA outputs.Auto station scan with 60 presets.Front panel audio control center.Treble, bass, master & microphone volume adjustments.Repeat & random file functions.Dim: 3.9"H x 9.8"W x 9.8"D.Includes remote & FM antenna

Cut the cord on cable and satellite! The Supersonic HDTV Digital Amplified Indoor Antenna lets you receive your local news, weather, sitcoms, kids and sports programming for free! Boost your signal strength and enjoy clear, crisp picture quality and free TV with this indoor antenna..Up to 40-mile reception range.Supports broadcast HDTV 1080p, 1080i & 720p.Receives free local digital & analog TV broadcast signals.Full-band DTV/VHF/UHF/FM receiver.Freq range: 47MHz–860MHz channels.State-of-the-art 2-stage VHF amps.20dB–30dB antenna gain.Simple connection via built-in, included coaxial cable.Low-noise, high-gain UHF amp incorporating Surface Mount Technology.Super-efficient noise-reduction circuitry.Tilt adjustment.LED power indicator.Imp: 75Ω.110V–127V AC power.Includes cable adapter & user manual.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or reproductive harm. For more information, go to www.P65WARNINGs.ca.gov

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 2000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 90 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 90 W RMS at 8 Ohm, two 125 W RMS at 4 Ohm, 250 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 19.7 lbs..The Gemini® professional power amplifier with 2000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

This Winegard® TV antenna amplifier works with UHF and VHF signals. Clear Circuit Technology™ ensures high quality signal path by increasing range/channels and reducing pixelization as well as drop-outs. With ultra-low noise of 1dB, it gives better picture quality and dynamic sound experience. Built with FM trap to minimize interference with digital TV channels. Includes energy-efficient USB power supply with LED power indicator for added convenience..Indoor TV antenna amplifier boost the performance of your TV antenna.Provides gain of 20 dB and Noise figure of 1 dB for outstanding sound experience.Supply power at 5 V.Dimensions: 1.5"H x 0.8"W x 8.5"L.Compatible with any non amplified/passive TV antenna.Clear circuit technology maximizes range & channels.Energy-saving USB power supply with LED power indicator for added convenience.Minimize pixelation and dropouts, receive more channels to provide the best over-the-air viewing experience possible.Includes boost indoor digital TV antenna amplifier, extended range signal reception, USB power cable, adapter & printed documentation.Weight: 0.4 lbs..Comes with a limited warranty of 1 year.Winegard® Boost Ultra-low noise TV antenna amplifier offers optimal signal handling capacity. Suitable for use with non-amplified/passive TV antenna.

Gemini ES-210MXBLU 2-Way High-Powered Passive PA System (GCIES210MXBLUDS).Ultralightweight & extremely compact Integrated MP3 player with connections for USB, SD Card & Bluetooth.600W peak, 150W RMS Class D built-in amp.10" LF woofer with 2" voice coil.Pure titanium 1" HF compression driver.Wide dispersion horn with forward-firing bass reflex ports.ABS impact resistant nylon fiber cabinet.8-channel powered mixer with onboard digital echo effect.Individual bass, treble, effects & volume controls for 4 line/microphone inputs.15V phantom power for capacitance microphones.Top & side handles for easy carrying.Flyable & stand mountable.Includes all cables & 1 microphone.Weight: 40lbs

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 5000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 100 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 400 W RMS at 8 Ohm, two 550 W RMS at 4 Ohm, 1100 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 26.8 lbs..The Gemini® professional power amplifier with 5000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

The JBL CSA 180Z provides 80 watts of clean, efficient power to drive a small sound system. It can power several speakers effectively in a 70-volt commercial system..80-watt mono power amplifier for commercial audio systems.Supports 70-volt and 100-volt distributed audio systems without the need for a separate transformer.Uses Crown's high-efficiency DriveCore technology to provide excellent audio performance.Independent bass and treble controls.Fanless, space-saving single half-width rack space (1U) design

The white AM7215/95 2-Way 15" Loudspeaker System from JBL is a high-power, lightweight, 2-way, full range loudspeaker. It is comprised of the JBL Differential Drive, dual voice coil and dual magnetic gap 2265H (15") low frequency driver, and 2432H high frequency 1.5" exit, 3" voice-coil compression driver. The large format Progressive Transition (PT) waveguide provides a 90 x 50° coverage..Wired 2-way loudspeaker give smooth and precise production of sound to deliver an ultimate audio experience.Delivers 600 watts RMS and 2400 watts peak output power.Offers a wide projection range with a rotatable 90° x 50° horn, delivering consistent coverage across large venues.8 Ohm impedance extracts maximum power so you will get more output from your speakers.Hear low subs and soaring vocals with a frequency range of sound from 40 Hz-20 kHz.15" woofer driver size allows better stereo imaging with maximum sound feasibility.1.50" tweeter driver size provides crispier, well-detailed sound with maximum productivity.1.20 kHz maximum crossover frequency effectively splits audio signals to ensure delivery of better and dependable audio ranges.96 dB sensitivity for efficient conversion of power into sound to produce adequate audio output.30.8" height for maximum coverage efficiency and feasible operation.Dimensions (H x W x D): 30.8" x 16.5" x 19.80".5-Year Limited Warranty