Antenna Distribution Amplifiers

High output capability provides the Eagle Aspen 25 dB Distribution Amp lower distortion than its competitors. Featuring UHF/VHF/FM broadband, 25 dB gain (54 MHz-215 MHz) and 22 dB gain (475 MHz-800 MHz), this amp is of exceptional quality..Uhf/Vhf/Fm Broadband.High-Output Capability Provides Lower Distortion Than Economy Models.25Db Gain (54Mhz-215Mhz).22Db Gain (475Mhz-800Mhz)

This Antennas Direct pre amplifier system includes a low-noise amplifier, a low-loss power inserter, two 36" weatherproof coaxial cables and a 12 VDC power supply. This system offers enhanced signal strength performance. With overload protection, it provides an ample gain of 17.5 dB VHF/19 dB UHF. Has 75 Ohms F connector input and output connectors. Amplifies over 100' coaxial cables, splitters and weak signals. Suitable for urban, suburban or rural area..Preamplifier system for optimal signal strength.Type "F" connector for optimum signal transfer.Has a frequency response of 174 - 222 MHz (VHF) 470 - 704 MHz (UHF).Provides an ample gain of 17.5 dB VHF/19 dB UHF.Noise figure of less than 2 dB in high (VHF), below 3 dB (UHF) for outstanding sound quality.Has an impedance of 75 ohms.Dimensions: 2"H x 3"W x 1 1/2"D.Suitable for use in urban, suburban and rural areas.Cast weatherproof housing with built in grounding lug for enhanced durability.Increases available signal strength and offers best-in-class overload protection for dependable reception.Low noise with internal LTE filter for excellent sound quality.Contains low-noise amplifier, low-loss power inserter, two 36" coaxial cables and a 12 VDC power supply for reliable operation.Weight: 1 lbs..Comes with a warranty of 90 days.Antennas Direct® Pre Amplifier system provides optimal signal strength. Provides a gain of 17.5 dB for VHF signals and 19 dB for UHF signals.

This Winegard® TV antenna amplifier works with UHF and VHF signals. Clear Circuit Technology™ ensures high quality signal path by increasing range/channels and reducing pixelization as well as drop-outs. With ultra-low noise of 1dB, it gives better picture quality and dynamic sound experience. Built with FM trap to minimize interference with digital TV channels. Includes energy-efficient USB power supply with LED power indicator for added convenience..Indoor TV antenna amplifier boost the performance of your TV antenna.Provides gain of 20 dB and Noise figure of 1 dB for outstanding sound experience.Supply power at 5 V.Dimensions: 1.5"H x 0.8"W x 8.5"L.Compatible with any non amplified/passive TV antenna.Clear circuit technology maximizes range & channels.Energy-saving USB power supply with LED power indicator for added convenience.Minimize pixelation and dropouts, receive more channels to provide the best over-the-air viewing experience possible.Includes boost indoor digital TV antenna amplifier, extended range signal reception, USB power cable, adapter & printed documentation.Weight: 0.4 lbs..Comes with a limited warranty of 1 year.Winegard® Boost Ultra-low noise TV antenna amplifier offers optimal signal handling capacity. Suitable for use with non-amplified/passive TV antenna.

Experience the ultimate in television signal reception with the Televes® LTE Filtering 3-Port Distribution Amplifier. This domestic distribution amplifier is designed to extend the over-the-air television signal from your antenna throughout your home's coaxial cable network. The Distribution Amp provides a total of 3 outputs, 2 of which have a maximum gain of 16 dB. The 3rd output has a lower gain of 12 dB, intended to be connected to the TV set closest to the amplifier itself. Its adjustable gain allows you to fine-tune the ideal level and avoid over-amplification. Constructed from high-grade ABS plastic and cast metal, this amplifier features a built-in low consumption UL®-listed power supply, providing over 50% energy savings compared to most other distribution amplifiers. Its compact, wall-mounted design ensures low visual impact, while its high-screening metal chassis provides optimal electromagnetic shielding. The built-in LTE filter eliminates any potential cell phone signal interference created by nearby cell phone stations or home cell phone booster systems, ensuring a clear, uninterrupted TV signal. Don't compromise on your TV signal quality. Upgrade to the Televes® LTE Filtering 3-Port Distribution Amp today and experience the difference..3-output distribution amplifier; adjustable gain, with a maximum gain of 16 dB; manual gain control, protected by a folding cover.Low VHF, high VHF, and UHF signals amplification.Low-impact visual design and limited size.Integrated high-performance switched-mode power supply (40% less than a standard amplifier)."F" connectors.Built-in LTE filter eliminates any potential cell phone interference.Low consumption power supply provides over 50% energy savings.High-screening metal chassis provides optimal electromagnetic shielding.Elegant and discrete wall-mounted form factor.Can be optionally wall-mounted using your own screws.Includes power cord

Experience the best of over-the-air television with the Televes® LTE Filtering 5-Port Distribution Amplifier. This domestic distribution amplifier is designed to extend your antenna's signal throughout your home's coaxial cable network. With its adjustable gain, you can fine-tune the ideal level and avoid over-amplification. Plus, it incorporates LTE filtering to eliminate any potential cell phone signal interference. The Distribution Amp provides a total of 5 outputs, 4 of which have a maximum gain of 16 dB, in addition to a lower gain output of 12 dB meant to be connected to the TV set closest to the amplifier itself. It features a low visual impact wall-mounted compact design and small size, with cast metal and resistant high-grade ABS plastic construction for maximum durability and best-in-class shielding. 1 of the standout features of this amplifier is its built-in low-consumption UL®-listed power supply. This provides over 50% energy savings compared to the wall-wart adapters found in most other distribution amplifiers. Not only does this save you money on your energy bills, but it also helps to reduce your carbon footprint. Upgrade your home entertainment system with the Televes® TV Antenna Distribution Amp. With its advanced features and energy-efficient design, it's the smart choice for any modern home. Don't miss out on the opportunity to enhance your viewing experience..5-output distribution amplifier; adjustable gain, with a maximum gain of 16 dB; manual gain control, protected by a folding cover.Low VHF, high VHF, and UHF signals amplification.Low-impact visual design and limited size.Integrated high-performance switched-mode power supply (40% less than a standard amplifier)."F" connectors.Built-in LTE filter eliminates any potential cell phone interference.Low consumption power supply provides over 50% energy savings.High-screening metal chassis provides optimal electromagnetic shielding.Elegant and discrete wall-mounted form factor.Can be optionally wall-mounted using your own screws.1-year limited warranty.Includes power cord

Winegard® HDTV preamplifier with TwinAmp technology individually amplifies UHF and VHF signals. Clear Circuit Technology™ ensures high quality signal path by increasing range/channels and reducing pixelization as well as drop-outs. With ultra-low noise of 1dB, it gives better picture quality and dynamic sound experience. Built with FM trap to minimize interference with digital TV channels. Includes energy-efficient USB power supply with LED power indicator for added convenience..Outdoor TV antenna preamplifier works with any passive outdoor TV antenna and extends the signal range.Provides gain of 18 dB and Noise figure of 1 dB for outstanding sound experience.Supply power at 5 V, 130 mA.Dimensions: 4.8"H x 4"W x 6"L.TwinAmp Technology™ separately amplifies VHF/UHF signals and delivers extraordinary performance/signal accuracy.With 10x more power handling capability remove interfering RF signals using band pass filters.Ultra low noise for outstanding signal quality.Installs easily on any outdoor non-amplified TV antenna.Includes LNA-200 boost XT preamplifier, power inserter, hose clamps, 110 V adapter and printed documentation.Weight: 0.6 lbs..Comes with a limited warranty of 1 year.Winegard® Boost XT Ultra-low noise digital HDTV preamplifier offers optimal signal handling capacity. Suitable for use with non-amplified/passive TV antenna.

The ANTOP Smartpass Amplifier with 4G LTE Filter & Power Supply Kit (White) is designed to work with any nonamplified antenna to boost the over-the-air TV signal received by the antenna. The attached 3 ft. and .3 ft. extension coaxial cables offer connection flexibility and enable you to move the antenna within a wider placement range. It supports HDTV, 1080p TV and 4K Ultra HD..Works with any passive TV antenna.High-gain amplifies VHF & UHF signals with a low noise level, less than 2dB.Dual-color indicator for long & short reception.3ft & .3ft extension coaxial cables attached at either end.Must be powered to function through included USB cable.Engineered & designed in the USA.All-in-one design allows an easier connection between passive antenna & TV to deliver correct balance between short & long range reception.Blocks 3G & 4G wireless signals to ensure noise-free digital TV reception.24-hour access to online customer support & installation assistance from manufacturer.Includes USB AC/DC power adapter, USB cable & instruction manual.1-year warranty & 30-day money-back guarantee.White

Experience the power of optimized TV frequencies with the Televes® Mast Amplifier. This innovative device is designed to enhance your TV viewing experience by ensuring an optimum amount of signal is delivered at all times. It's ideal for use with any TV antenna, covering the entire TV band. Fine-tuned filtering avoids 5G cellphone interference and allows compatibility with ATSC 3.0 broadcasting (NextGenTV). Automatic gain adjustment compensates fluctuations on the received signal ensuring the best output level is delivered and avoids over- or under-amplification. The Televes® Mast Amplifier is a 1-input TForce mast-mounted preamplifier, weighing just 5 lbs. It features high gain and powerful output level, while the high screening cast metal chassis ensures best-in-class electromagnetic shielding protection. The device includes a low-consumption UL®-listed power supply, providing 2 outputs for convenient distribution to additional TV sets. This Televes® preamplifier can also pass power to an active antenna when needed. Experience the difference with the Televes® Mast Amplifier. It's not just a device, it's a game-changer for your TV viewing experience. Don't settle for less, upgrade your TV signal today!.Dual-band amplification with independent automatic gain regulation per band; the VHF and UHF bands are independently and automatically adjusted.Very low noise and high output level (47 dBmV UHF, 43 dBmV VHF).Maximum gain: 31 dB (UHF, channels 14-36), 22 dB (high VHF, channels 7-13), 22 dB (low VHF, channels 2-6)."F" connectors.On/off switch to allow DC passing towards the input to power up active antennas or other preamplifiers.Easy mounting; equipped with a plastic tie for mast mounting.Resistant ABS-plastic black case for outdoor installation.5G and FM filtering eliminates cellphone and radio interference.Cast metal and resistant ABS-plastic construction for reliable outdoor installation in the harshest conditions.High-screening metal chassis provides optimal electromagnetic shielding.Includes power supply unit, power cord, and zip tie

Experience the power of optimized TV frequencies with the Televes® Mast Amplifier. This innovative device is designed with TForce technology, offering 2 inputs that cover the entire TV band. You can combine any 2 TV antennas for maximum reception. The automatic gain control ensures an optimum amount of signal is delivered at all times, avoiding over or under amplification situations. The gain control is independent per band, so adjustments to the UHF channels do not impact VHF channels and vice-versa. The Televes® Mast Amplifier is a robust and reliable device, weighing just 5 lbs. It is constructed from cast metal and high-grade ABS plastic, ensuring it can withstand the harshest outdoor conditions. The high screening cast metal chassis provides best-in-class electromagnetic shielding protection. A low-consumption UL®-listed power supply is included, providing 2 outputs for convenient distribution to additional TV sets. This Televes® preamplifier can also pass power to an active antenna when needed. Don't miss out on the opportunity to enhance your TV viewing experience..Dual-band amplification with independent automatic gain regulation per band.Low noise and high output level (47 dBmV UHF, 43 dBmV VHF).Maximum gain: 27 dB (UHF, channels 14-36), 18 dB (high VHF, channels 7-13), 18 dB (low VHF, channels 2-6)."F" connectors.On/off switch to allow DC passing towards the input to power up BOSS system.Input level manual regulation margin (0 to 20 dB) for each input.Easy mounting; equipped with a plastic tie for mast mounting.Resistant ABS-plastic black case for outdoor installation.5G and FM filtering eliminates cellphone and radio interference.Cast metal and resistant ABS-plastic construction for reliable outdoor installation in the harshest conditions.High-screening metal chassis provides optimal electromagnetic shielding.Includes power supply unit, power cord, and zip tie