TV Signal Amplifier Boosters

Experience the ultimate in television signal reception with the Televes® LTE Filtering 3-Port Distribution Amplifier. This domestic distribution amplifier is designed to extend the over-the-air television signal from your antenna throughout your home's coaxial cable network. The Distribution Amp provides a total of 3 outputs, 2 of which have a maximum gain of 16 dB. The 3rd output has a lower gain of 12 dB, intended to be connected to the TV set closest to the amplifier itself. Its adjustable gain allows you to fine-tune the ideal level and avoid over-amplification. Constructed from high-grade ABS plastic and cast metal, this amplifier features a built-in low consumption UL®-listed power supply, providing over 50% energy savings compared to most other distribution amplifiers. Its compact, wall-mounted design ensures low visual impact, while its high-screening metal chassis provides optimal electromagnetic shielding. The built-in LTE filter eliminates any potential cell phone signal interference created by nearby cell phone stations or home cell phone booster systems, ensuring a clear, uninterrupted TV signal. Don't compromise on your TV signal quality. Upgrade to the Televes® LTE Filtering 3-Port Distribution Amp today and experience the difference..3-output distribution amplifier; adjustable gain, with a maximum gain of 16 dB; manual gain control, protected by a folding cover.Low VHF, high VHF, and UHF signals amplification.Low-impact visual design and limited size.Integrated high-performance switched-mode power supply (40% less than a standard amplifier)."F" connectors.Built-in LTE filter eliminates any potential cell phone interference.Low consumption power supply provides over 50% energy savings.High-screening metal chassis provides optimal electromagnetic shielding.Elegant and discrete wall-mounted form factor.Can be optionally wall-mounted using your own screws.Includes power cord

Experience the best of over-the-air television with the Televes® LTE Filtering 5-Port Distribution Amplifier. This domestic distribution amplifier is designed to extend your antenna's signal throughout your home's coaxial cable network. With its adjustable gain, you can fine-tune the ideal level and avoid over-amplification. Plus, it incorporates LTE filtering to eliminate any potential cell phone signal interference. The Distribution Amp provides a total of 5 outputs, 4 of which have a maximum gain of 16 dB, in addition to a lower gain output of 12 dB meant to be connected to the TV set closest to the amplifier itself. It features a low visual impact wall-mounted compact design and small size, with cast metal and resistant high-grade ABS plastic construction for maximum durability and best-in-class shielding. 1 of the standout features of this amplifier is its built-in low-consumption UL®-listed power supply. This provides over 50% energy savings compared to the wall-wart adapters found in most other distribution amplifiers. Not only does this save you money on your energy bills, but it also helps to reduce your carbon footprint. Upgrade your home entertainment system with the Televes® TV Antenna Distribution Amp. With its advanced features and energy-efficient design, it's the smart choice for any modern home. Don't miss out on the opportunity to enhance your viewing experience..5-output distribution amplifier; adjustable gain, with a maximum gain of 16 dB; manual gain control, protected by a folding cover.Low VHF, high VHF, and UHF signals amplification.Low-impact visual design and limited size.Integrated high-performance switched-mode power supply (40% less than a standard amplifier)."F" connectors.Built-in LTE filter eliminates any potential cell phone interference.Low consumption power supply provides over 50% energy savings.High-screening metal chassis provides optimal electromagnetic shielding.Elegant and discrete wall-mounted form factor.Can be optionally wall-mounted using your own screws.1-year limited warranty.Includes power cord

Experience the power of optimized TV frequencies with the Televes® Mast Amplifier. This innovative device is designed to enhance your TV viewing experience by ensuring an optimum amount of signal is delivered at all times. It's ideal for use with any TV antenna, covering the entire TV band. Fine-tuned filtering avoids 5G cellphone interference and allows compatibility with ATSC 3.0 broadcasting (NextGenTV). Automatic gain adjustment compensates fluctuations on the received signal ensuring the best output level is delivered and avoids over- or under-amplification. The Televes® Mast Amplifier is a 1-input TForce mast-mounted preamplifier, weighing just 5 lbs. It features high gain and powerful output level, while the high screening cast metal chassis ensures best-in-class electromagnetic shielding protection. The device includes a low-consumption UL®-listed power supply, providing 2 outputs for convenient distribution to additional TV sets. This Televes® preamplifier can also pass power to an active antenna when needed. Experience the difference with the Televes® Mast Amplifier. It's not just a device, it's a game-changer for your TV viewing experience. Don't settle for less, upgrade your TV signal today!.Dual-band amplification with independent automatic gain regulation per band; the VHF and UHF bands are independently and automatically adjusted.Very low noise and high output level (47 dBmV UHF, 43 dBmV VHF).Maximum gain: 31 dB (UHF, channels 14-36), 22 dB (high VHF, channels 7-13), 22 dB (low VHF, channels 2-6)."F" connectors.On/off switch to allow DC passing towards the input to power up active antennas or other preamplifiers.Easy mounting; equipped with a plastic tie for mast mounting.Resistant ABS-plastic black case for outdoor installation.5G and FM filtering eliminates cellphone and radio interference.Cast metal and resistant ABS-plastic construction for reliable outdoor installation in the harshest conditions.High-screening metal chassis provides optimal electromagnetic shielding.Includes power supply unit, power cord, and zip tie

Experience the power of optimized TV frequencies with the Televes® Mast Amplifier. This innovative device is designed with TForce technology, offering 2 inputs that cover the entire TV band. You can combine any 2 TV antennas for maximum reception. The automatic gain control ensures an optimum amount of signal is delivered at all times, avoiding over or under amplification situations. The gain control is independent per band, so adjustments to the UHF channels do not impact VHF channels and vice-versa. The Televes® Mast Amplifier is a robust and reliable device, weighing just 5 lbs. It is constructed from cast metal and high-grade ABS plastic, ensuring it can withstand the harshest outdoor conditions. The high screening cast metal chassis provides best-in-class electromagnetic shielding protection. A low-consumption UL®-listed power supply is included, providing 2 outputs for convenient distribution to additional TV sets. This Televes® preamplifier can also pass power to an active antenna when needed. Don't miss out on the opportunity to enhance your TV viewing experience..Dual-band amplification with independent automatic gain regulation per band.Low noise and high output level (47 dBmV UHF, 43 dBmV VHF).Maximum gain: 27 dB (UHF, channels 14-36), 18 dB (high VHF, channels 7-13), 18 dB (low VHF, channels 2-6)."F" connectors.On/off switch to allow DC passing towards the input to power up BOSS system.Input level manual regulation margin (0 to 20 dB) for each input.Easy mounting; equipped with a plastic tie for mast mounting.Resistant ABS-plastic black case for outdoor installation.5G and FM filtering eliminates cellphone and radio interference.Cast metal and resistant ABS-plastic construction for reliable outdoor installation in the harshest conditions.High-screening metal chassis provides optimal electromagnetic shielding.Includes power supply unit, power cord, and zip tie

33ft (10m) 8K 60Hz HDMI Signal Booster, Active HDMI 2.1 Inline Repeater and Video Signal Amplifier up to 8K 60Hz/4K 144Hz, Compact HDMI Cable Extender - HDMI Signal Extension.Combine two standard-length HDMI cables into an extra-long cable supporting up to 8K 60Hz / 4K 144Hz at a max total cable length of 33ft (10m), with 13ft (4m) from source to repeater, and 20ft (6m) from repeater to display.Lightweight HDMI signal amplifier features a metal housing and a small form factor, making it versatile for installation in a variety of environments; It is ideal for office, education, and digital signage applications.TAA Compliant HDMI booster is powered through an available USB Port or USB Wall Charger; 5ft (1.5m) USB-A Cable included; Supports lower resolutions and refresh rates at greater distances such as 1080p at 150ft (45m).Inline HDMI Repeater requires no drivers or software and works with any operating system, including Windows, macOS, and ChromeOS; It supports active HDMI cables and video adapters, providing versatile functionality.HDMI Extender is HDMI 2.1 compliant, supporting CEC, variable refresh rate, auto low-latency mode, HDR10, HDCP 1.4/2.2/2.3, DSC 1.1/1.2a, and 7.1ch HDMI audio; 48Gbps Bandwidth; 4:4:4 Chroma subsampling; ARC/eARC not supported.The TAA-Compliant HDMI signal amplifier requires no drivers or software. Its compact form factor and metal enclosure make it suitable for installation in a variety of environments. An included 5ft (1.5m) USB Type-A power cable is provided to connect to an available USB port or USB wall charger, if required..Boost the signal strength of an HDMI video signal in classrooms, offices, and boardrooms.Use existing HDMI cables to extend a video signal.Extend an 8K 60Hz HDMI signal up to 33ft (10m).Extend an 8K 60Hz HDMI signal over existing HDMI cabling at up to 33ft (10m). It supports lower resolutions at longer distances, such as 4K 60Hz at 83ft (25m). This HDMI 2.1 compliant device supports CEC, HDR10, HDCP, DSC, and 7.1ch audio..Amplify and extend an 8K 60Hz HDMI® signal, connecting two DSC-enabled devices, using two Ultra High Speed HDMI cables

Ready to get an antenna and you live within 60 miles of the broadcast TV towers? The Mohu Leaf Plus Amplified Indoor HDTV Antenna is for you. It is modeled after a discrete mud flap antenna designed for the US Military and unlike other amplified antennas, it does not require a power source! Instead, it taps power from your TV via a USB power cable. So sit back and enjoy free TV with Mohu!.Up to 60-mile range.Multidirectional HDTV antenna.Modeled after an innovative, discreet mud flap antenna designed for the US military.First Stage Amplification amplifies right at the antenna where the signal is at its best for less pixelation & improved reception.Reversible & paintable & easy to install.Includes 16ft high-performance coaxial cable, USB power cube, push pins, VELCO dots & manual.1-year warranty

Ditch those monthly subscription TV fees and cut the cord. Go free! Get the best reception possible of free digital over-the-air (OTA) TV broadcasts with this Black-Fabric Amplified Indoor HDTV Antenna from ONE FOR ALL. Enjoy a wide variety of free channels with a mix of local and network shows such as news, sports, comedy, kids, and many more! Flat, standing or wall mounted, this antenna features a stylish design that can blend into any interior. This antenna has a reception range of up to 60 miles..Up to 60-mile range.Multidirectional reception avoids blind spots.Free 1080p and 4K broadcast TV shows include local and network news, sports, comedy, kids shows, and more.Modern yet practical design uses stylish, trendsetting fabric elements.Signal level indicators help find the ideal antenna placement to get the most channels available.In order to receive the most channels possible, active noise reduction filtration helps eliminate unwanted 3G/4G/LTE/5G cell signals that can interfere with crystal clear reception.Reception quality and the number of channels received are dependent on multiple factors such as distance from TV broadcast towers, broadcast power, line of sight, terrain, metal construction materials, and other environmental factors.Includes 5.9 ft. coaxial cable, DC power adapter, and manual

Enjoy free 1080p and 4K broadcast TV without having to pay expensive cable fees. With One for All's Amplified Indoor TV Antenna, you can enjoy a wide variety of channels such as news, sports, comedy, kids, and many more! This antenna has a reception range up to 55 miles. It's compatible with ATSC 3.0 (NextGen TV) to receive 4K Ultra HDTV with movie-quality sound and more (requires TV with NextGen capabilities). It even includes a signal level indicator so you know how strong your signal is..Up to 55-mile range.Designer, sound bar-style, amplified HDTV antenna.360° multidirectional reception: no need to point in any particular direction.3G/4G/5G/LTE filters to help block all 3G/4G/5G/LTE mobile phone signal interference.Signal level indicator indicates best location for antenna.Supports 1080p HD and 4K UHD broadcasts.Includes USB AC adapter, VELCRO dots, and instructions.With One for All's Amplified Indoor TV Antenna, you can enjoy a wide variety of channels such as news, sports, comedy, kids, and many more!

Enjoy free 1080p and 4K broadcast TV without having to pay expensive cable fees. With One for All's Amplified Fabric Indoor TV Antenna, enjoy a wide variety of channels such as news, sports, comedy, kids and many more! This antenna has a reception range up to 60 miles with a black fabric panel and variable gain control. It's compatible with ATSC 3.0 (NextGen TV) to receive 4K Ultra HDTV with movie-quality sound and more (requires TV with NextGen capabilities). It even includes a signal level indicator so you know how strong your signal is..Up to 60-mile range.Designer, sound bar-style, amplified HDTV antenna.Variable gain control "smart amplifier".360° multidirectional reception: no need to point in any particular direction.3G/4G/5G/LTE filters to help block all 3G/4G/5G/LTE mobile phone signal interference.Signal level indicator indicates best location for antenna.Supports 1080p HD and 4K UHD broadcasts.Includes USB AC adapter, VELCRO dots, and instructions.With One for All's Amplified Fabric Indoor TV Antenna, enjoy a wide variety of channels such as news, sports, comedy, kids and many more!

If you're interested in cutting the cord on cable or satellite, you'll need a good antenna. The QFX amplified 360-degree Rotating Outdoor Antenna comes HD/DTV/VHF/UHF/FM radio ready and supports 720p, 1080i and 1080p HDTV. This antenna is motorized and has a remote. Plus it can feed up to two TV sets at a time..Supports HD, DTV, VHF, UHF and FM.Connects to DTV tuner to receive digital and analog programming.HDTV 1080p, 1080i, 720p support.Full-band DTV/VHF/UHF receiver.360° amplified rotating antenna.Built-in signal booster.26dB to 28dB gain.Imp: 75Ω.Operates up to 2 TV sets.Includes remote with 2 AAA batteries and 50 ft. coaxial cable.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

This SIIG four-port HDMI HDR mini splitter amplifier with EDID management distributes HDMI video/audio signals from one HDMI source to four HDMI displays while maintaining signal quality. Allows high-quality HDMI video/audio to be transmitted to four displays without signal degradation. Comes with adjustable EDID management and intelligent auto video scaling provides a cost effective and an advanced HDMI splitter solution..This four-port HDMI HDR mini splitter amplifier distributes HDMI video/audio signals from one HDMI source to four HDMI displays while maintaining signal quality.Built-in Micro-USB port for power or firmware updates; contains 1 x HDMI input, 5 x HDMI output, and 1 x EDID management.Supports DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM.Supports 4K and 2K resolutions on 60Hz (YUV 4:4:4 8-bit) and HDR 4K and 2K resolutions on 60Hz (YUV 4:2:0 10-bit) with xvYCC, x.v.Color, and Deep Color.Works with PS4 Pro/XBox One X/Apple Tv 4K/Fire Tv/Roku/Blu-Ray/Nvidia SHIELD.Downscaling from 4K to 1080p capability.Provides an 18Gbps video bandwidth (single-link 600MHz) and a wide frequency range of 25-600MHz.Supports embedded EDID and EDID learning via DIP switches to automatically format to your display.Cascadable up to 10 layers.EDID and firmware management allow for maximum compatibility now and into the future, offers widest range of monitor/display/TV support from either pre-programmed EDID or EDID learning from the connected displays.Detects and configures the video resolution automatically according to the capabilities of each connected monitor to support simultaneous 4K and 1080P output.10-bit High Dynamic Range (HDR) provides an increased level of contrast between light and dark images to create a more vivid image (HDR source, display, and Premium High Speed HDMI cables are needed to obtain HDR video quality).LED indication for power and signal status.Power consumption: 2.21W.Box contains: amplifier with EDID management, USB Type-A to Micro-USB cable, quick start guide.Meets or exceeds the TAA, FCC, CE, and RoHS standards.3-year manufacturer limited warranty