Copper To Fiber Optic Converters

The Transition Networks® SGFEB1040-130-NA 1-port RJ-45 to SFP standalone fast Ethernet media/rate converter features auto negotiation, autocross, link pass through, far end fault and remote fault detect for efficient troubleshooting. It supports multimode or single mode fiber and IEEE802.3az Ethernet. This converter offers data rate of 10/100/1000 Mbps for copper and 1000 Mbps for fiber..Stand-alone media/rate converter is a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one 100/1000Base-X SFP slot.Power supply: 7.5 - 24 VDC, provided by wide input AC wall mount adapter, Consumption: 2.2 W.LEDs: PWR (power), LACT (fiber link/activity), RJ-45 upper left (green/amber), RJ-45 upper right (speed).Data rates: 10/100/1000 Mbps (copper), 1000Mbps, 100Mbps also supported via SFP port (fiber).Form factor: Rack-mountable, wall mountable, rail-mountable, desktop.IEEE standards: IEEE 802.3, 802.3ab, 802.3u, 802.3z, 802.3az, Switches: Auto-negotiation enable/disable, link pass through enable/disable.Frame size: 10260 byte jumbo frames, RAM buffer: 512KB, MAC addresses: 8K.Features auto-MDI/MDIX, auto-negotiation, link pass through, far-end-fault (FEF) detection and remote fault detect.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets EN55022 Class A, EN55024, FCC Class A, CE Mark, UL, UL60950, CSA certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Supports single‑mode fiber with an SC connector, enabling long‑distance transmission over optical fiber.Functions as an unmanaged stand‑alone Fast Ethernet media converter, bridging 10/100Base‑TX copper ports to 100Base‑FX fiber ports.Operates at 10 Mbps or 100 Mbps, with automatic rate conversion to support legacy copper devices.Extends network reach up to 20 km over single‑mode fiber.Designed for Fast Ethernet (100 Mbps) environments; not intended for Gigabit Ethernet.Operates from a 12V input; typical consumption is low, suitable for energy‑efficient deployments.While exact MTBF is not listed, Lantronix converters are designed for high reliability in continuous operation.Uses 1310 nm wavelength for single‑mode fiber transmission.Lifetime Limited Warranty

Extend RS232, RS422 or RS485 protocols over multimode fiber so different types of equipment can talk to one another in point to point or multipoint environments. Serial extenders work well in factory automation, building automation, and process automation where PLC's with RS232, RS422 or RS485 interfaces are used to control devices. The ability to extend the distance to their devices over fiber while also adding protection from electrical interference which can be caused by large motors which are prevalent in these environments is very beneficial..Data-derived or RTS transmit/receive switching (RS-485).Extended ambient operating range -40 to +176° F (-40 to +80° C).Communicate signals in a point-to-point or ring topology..Ideal for fiber applications that use different interface protocols.

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Supports 1000Base‑LX singlemode fiber with a standard SC connector.Functions as a stand‑alone Gigabit Ethernet Media Converter that bridges 1000Base‑T copper ports to 1000Base‑LX fiber ports.Provides a full 1000 Mbps (1 Gbps) throughput, ensuring high‑speed performance for demanding applications.Extends network reach up to 10,000 meters (10 km) over singlemode fiber.Fully compliant with Gigabit Ethernet standards, supporting 1000Base‑T to 1000Base‑LX conversion.Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility.Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 1310 nm wavelength for singlemode fiber, the industry standard for 1000Base‑LX applications.Lifetime Limited Warranty

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Supports multimode fiber with an LC connector, enabling shorter‑range fiber transmission compared to single‑mode..An unmanaged stand‑alone Fast Ethernet media converter that bridges 10/100Base‑TX copper ports to 100Base‑FX multimode fiber ports..Operates at 10 Mbps or 100 Mbps, with automatic rate conversion for legacy copper devices..Extends network reach up to 2 km over multimode fiber..Designed for Fast Ethernet (100 Mbps) environments; not intended for Gigabit Ethernet..Lantronix converters are engineered for high reliability in continuous operation..Uses 1310 nm wavelength for multimode fiber transmission.

The StarTech MCM10G6SSFP is a compact, high‑performance 10GbE multi‑gigabit media converter designed to seamlessly bridge copper and fiber networks for modern enterprise environments. Featuring a 10GBASE‑T RJ‑45 port and an open SFP+ slot, it enables flexible copper‑to‑fiber conversion across mixed‑speed networks, supporting 100M, 1G, 2.5G, 5G, and 10G Ethernet for maximum compatibility. Engineered for reliability, it complies with IEEE 802.3 standards, supports 16K jumbo frames, auto‑negotiation, and auto MDI/MDI‑X to ensure stable, optimized data transmission across diverse infrastructure setups. The unit’s durable metal chassis allows versatile deployment as a standalone device or via wall‑mount, rack‑mount, DIN rail, or chassis installations, making it suitable for data centers, wiring closets, and remote network expansions. With low power consumption (3.75W typical) and operating temperatures ranging from 0°C to 50°C, it delivers dependable performance in space‑sensitive and power‑restricted environments. Its plug‑and‑play design, compatibility with both single‑mode and multimode SFP+ modules, and TAA compliance further reinforce its suitability for professional, on‑premises networks requiring scalable, high‑speed copper‑to‑fiber conversion..Built for high‑speed data transmission and designed as a standalone converter enabling direct RJ‑45 to SFP+ fiber conversion..Featuring an RJ‑45 copper port that accepts 100M, 1G, 2.5G, 5G, and 10G Ethernet input..Offering an open SFP+ slot that supports both single‑mode and multimode 10G fiber transceivers..Equipped with female terminations on both the RJ‑45 port and the SFP+ cage..Supporting advanced data features including IEEE 802.3 compliance, auto‑negotiation, auto MDI/MDI‑X, full‑duplex flow control, and 16K jumbo frames..Complying with TAA and ROHS3 requirements while adhering to IEEE Ethernet standards.

The Transition Networks® SGFEB1013-130-NA Ethernet media converter offers data rates up to 10/100/1000 Mbps on copper and 1000 Mbps on fiber ports. It integrates 1000Base-SX/LX fiber into a 10/100/1000Base-T copper to extend the network distance longer. This Ethernet media converter features AutoCross™ and Link Pass through technology. While the twisted pair ports on converter automatically detect the correct MDI or MDI-X configuration and monitors the loss of signal in fiber and copper ports..Media converter is an integration and conversion solutions for half and full-duplex environments.Dimensions: 1"H x 3.3"W x 4.8"D.Comes in black color.Interface: One RJ-45, one female SC.Fiber mode: Multi-mode fiber (MMF).Supports data transfer rate up to 1 Gbps and features diltering addresses of 8K entries.Connectivity technology: Wired, Operating distance: 721.78'.Wavelength: 850 nm, Indicators: Link/activity, port duplex mode, port transmission speed, power.Supports 50/125um, 62.5/125um standard optical fiber/twisted pair media for data transmission using Gigabit Ethernet technology.Power: 2.2 W consumption, Form Factor: Desktop, rack-mountable, rail-mountable, wall mountable.Features indicators for auto-negotiation, AutoCross, built-in DIP switch, energy efficient Ethernet, far end fault and half duplex mode.Offers jumbo frames support and link pass-through for reliable data transfer.Secures data from external sources of noise and interference and improves network performance.Meets RoHS and WEEE standards.Weight: 8.8 oz..Comes with lifetime warranty

The StarTech MCM10GSFP2 is a high‑performance 10GbE copper‑to‑fiber media converter designed to extend network reach and upgrade existing infrastructure with seamless RJ‑45 to SFP+ connectivity. It converts 2.5G/5G/10GBASE‑T copper Ethernet to 10GBASE‑X fiber through an open SFP+ slot, supporting both multi‑mode and single‑mode SFP+ transceivers such as 10GBASE‑SR or 10GBASE‑LR for flexible deployment across enterprise, telecom, and data‑center environments. Built for reliability and versatility, it supports jumbo frames up to 16K, auto‑negotiation, full‑duplex flow control, and auto MDI/MDI‑X, ensuring smooth integration with mixed‑speed networks. Its compact design allows installation as a standalone unit or mounting on walls, racks, DIN rails, or chassis systems, making it suitable for structured wiring closets and remote network extensions. With low power consumption of just 5.3W via a 5V DC adapter, the device operates efficiently within 0°C to 50°C and includes LED indicators for quick diagnostics. Designed for professional environments, the MCM10GSFP2 delivers stable, plug‑and‑play 10Gbps performance and includes a universal power supply and quick‑start guide for effortless deployment..Delivering reliable wired Ethernet performance, the device supports RJ‑45 copper and SFP+ fiber interfaces along with full Gigabit and multigigabit capability..Delivering high throughput, the data transfer rate reaches up to 10,000 Mbps..Providing essential connectivity, the port configuration includes one RJ‑45 port and one SFP+ slot..Supporting multi‑network environments, compatibility extends to any 2.5G/5G/10GBASE‑T copper device and any 10GBASE‑X SFP+ fiber device..Adhering to global norms, certifications and standards include IEEE 802.3, TAA compliance, and RoHS3 compliance..Limited 2-Year Manufacturer Warranty.

Extend copper via fiber Get your copper-based network where it needs to go. This media converter lets you extend your copper-based network via fiber to a maximum distance of 60 km through the use of an SFP, providing your deployment with the connectivity it needs. Support multiple standards Meets whatever standard you need it to. It's fully compliant with IEEE802.3, IEEE802.3U, 10/100BASE-TX and 100BASE-FX. Straightforward installation The media converter can be installed into a standard converter chassis. The installation is quick and easy. Status updates Know how your media converter is performing. Operation status can be locally monitored through a set of diagnostic LEDs located on the front panel. Know link media issues immediately Features helpful Link Fault Pass-Through (LFP) functionality. LFP immediately alarms administrators to the problem with the link media and provides an efficient solution to monitor the net..Flow Control: IEEE802.3x flow control for full duplex mode..One RJ45 port and one SFP slot.Use as a standalone unit or with the available chassis (LHGC-RACK)..Know operation status through LEDs on front panel.Fully compliant with IEEE802.3, IEEE802.3U, 10/100BASE-TX, 100BASE-FX

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Multimode fiber with ST connector for secure copper‑to‑fiber conversion..Stand‑alone Fast Ethernet media and rate converter bridging 10/100Base‑TX copper to 100Base‑FX fiber..Converts 10 Mbps and 100 Mbps Ethernet over copper to 100 Mbps Ethernet over fiber..Supports multimode fiber links up to 2,000 meters..Ethernet supported (10/100Base‑TX to 100Base‑FX), not Gigabit..Low operating consumption, typically 3 Watts..High reliability with MTBF around 1,000,000 hours..Operates at 1310 nm wavelength for multimode fiber transmission..Lifetime Limited Warranty

The E-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments..Far-End-Fault (FEF).DC and AC power inputs via terminal block.Automatic Link Restoration.Active Link Pass Through on SFP version.Auto-MDI/MDIX

The ME-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments. NDAA Compliant, TAA Compliant.DIN Rail clip and Velcro included.Multiple mounting options:.No configuration required.Available with LC, ST or SC fiber interfaces and available for multimode or single mode fiber.Small mechanical size allows use in enclosures with space constraints

The Transition Networks® SBFTF1013-105-NA 2-port RJ-45 to SC standalone fast Ethernet media/rate converter extends network distance up to 120 Km. It features auto-negotiation for automatic configuration to achieve the best mode of operation over a link and AutoCross™ that automatically detects/configures the twisted pair port to the correct MDI or MDI-X configuration. It supports link pass-through and far end fault for efficient troubleshooting..Stand-alone media/rate converter allows users to integrate fiber optic cabling into 10/100Base-TX copper environments.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10Base-T or 100Base-TX RJ-45, one multi mode SC.Power supply: External AC/DC, 12 VDC, 0.8 A min.LEDs: PWR (power), FD (fiber duplex), LNK/ACT, CD (copper duplex).Data rates: 10 Mbps, 100 Mbps (layer 2).IEEE standards: IEEE 802.3, Switches: Auto-negotiation on/off, half or full-duplex with auto-negotiation off, 10/100 Mbps with auto-negotiation off.Packet size: 2044 bytes untagged, 2048 bytes tagged, RAM buffer: 512KB.Maximum distance supported: 1.24 mile.Features auto-MDI/MDIX, auto-negotiation, link pass through and far-end-fault (FEF) detection.Temperature: 0 - 50 deg C operating, Humidity: 5 - 90 percent non-condensing.Meets UL, FCC Class A, VCCI Class 1, CISPR22/EN55022, Class A, EN55024, EN61000, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Supports 1000Base‑LX singlemode fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media Converter that bridges 1000Base‑T copper ports to 1000Base‑LX fiber ports.Provides a full 1000 Mbps (1 Gbps) throughput, ensuring high‑speed performance.Extends network reach up to 10,000 meters (10 km) over singlemode fiber.Fully compliant with Gigabit Ethernet standards, supporting 1000Base‑T to 1000Base‑LX conversion for interoperability with modern switches.Operates efficiently with a typical power consumption of approximately 3 Watts.Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 1310 nm wavelength for singlemode fiber, the industry standard for 1000Base‑LX applications.Lifetime Limited Warranty

The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Uses multimode fiber with SC connector, ideal for short‑to‑medium distance Ethernet transmission..Stand‑alone Fast Ethernet media converter designed to bridge copper 10/100Base‑TX connections to fiber 100Base‑FX links..Supports 10 Mbps and 100 Mbps Ethernet speeds, automatically negotiating duplex modes for compatibility..Provides reliable multimode fiber connectivity up to 2,000 meters, suitable for building or campus networks..Fully compliant with Ethernet standards (10/100Base‑TX to 100Base‑FX), but does not support Gigabit speeds..Operates efficiently with typical power consumption around 3 Watts, minimizing heat and energy use..Offers high reliability with a Mean Time Between Failures of approximately 1,000,000 hours..Operates at 1310 nm wavelength optimized for multimode fiber transmission..Lifetime Limited Warranty

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential; NDAA Compliant, TAA Compliant.Pause.Auto-MDI/MDIX.Link Pass Through.Far-End-Fault Detection.Auto-Negotiation

The Transition Networks® 1-port RJ-45 to SFP standalone Gigabit Ethernet media converter is perfect for business and mobile backhaul applications. It has 10/100/1000BT to 1000B-X SFP expansion slot and supports up to a distance of 328.08'..Stand-alone Gigabit Ethernet remotely managed media converter is ideal for business and mobile backhaul applications.Dimensions: 1"H x 3 1/4"W x 6 1/2"D.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one SFP slot, USB.Power supply: input: 100 - 240 VAC, 1 A, output: 12 VDC, 1.25 A.Data rates: 10/100/1000 Mbps (copper), 1000 Mbps (fiber).Form factor: External.IEEE standards: IEEE 802.3, 802.3ah, 802.1P, 802.1Q.Frame size: 10240 byte jumbo frames, MAC addresses: 8K.Maximum distance supported: 328.08'.Features two selectable remote management modes, auto-MDI/MDIX, auto-negotiation, pause, link pass through, far-end-fault and remote loopback.Temperature: 0 - 50 deg C operating, -25 - 85 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets EN55022 Class A, EN55024, UL60950, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset. )The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Total Number of Ports: 2.Network (RJ-45): Yes.DVI: No

The ME-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments. NDAA Compliant, TAA Compliant.DIN Rail clip and Velcro included.Multiple mounting options:.Available with LC, ST or SC fiber interfaces and available for multimode or single mode fiber.No configuration required.Small mechanical size allows use in enclosures with space constraints

Meet the connectivity needs of your deployment. This media converter converts 10/100/1000BASE-TX to 1000BASE-SX. Includes broadcast storm control, flow control, and CRC error checking..Switch Type Pure Networking Transceiver Media Converter.Port or Interface RJ-45, SC Duplex Ports.Compliant to EN60950, UL62368, and EN62368.Converts 10/100/1000BASE-TX to 1000BASE-SX.Dimensions H 1" x W 3.7" x L 2.7".Limited Warranty

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

Mini Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The GE-T Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective media conversion between 1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and its small size makes it ideal for locations where space is limited. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Auto-MDI/MDIX.Automatic Link Restoration.Interoperable with other 1000Base-T/SX/LX NICs or switch ports.Status LEDs for easy monitoring.Supports SFP modules

Mini Gigabit Ethernet Media Converter 10/100/1000Base-T to 1000Base-SX/LX The GE-PSW Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective media conversion between 10/100/1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and its small size makes it ideal for locations where space is limited. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Auto-Negotiation.Fixed Full-Duplex on fiber.Auto-MDI/MDIX.Active Link Pass Through.Automatic Link Restoration

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box® Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2). Media Converter Fast Ethernet Multimode 1300nm 2km SC. 10/100Mbps copper to 100Mbps fiber. Typical Enterprise applications include LAN extension, fiber mode conversion, or Ethernet speed conversion. These media converters feature a small metal enclosure that can be used stand alone or inserted into a high density rack mount chassis, LHC018A-AC-R2. Converters include an external 100-240VAC power adapter with US and Europe plug clips. Converters may also be powered from a USB port using the LHC021A USB power cable. The LHC018A-AC-R2 chassis is 1.5U high, has slots for up to 18 media converters, and includes a 100-240VAC power supply. The media converters are unmanaged, plug and play with no configuration..Connects Ethernet or Fast Ethernet to fiber optic cable..Compact size-measures just 0.8"H x 1.8"W x 3.4"D..Converters may also be powered from a USB port using the LHC021A USB power cable..Auto negotiates for speed and duplex..A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting.

The Transition Networks® 2-port RJ-45 to SC mini Gigabit Ethernet media converter is perfect for integrating fiber optic cabling into a 10/100/1000 UTP environment. It features unit and port LEDs for status information. This converter supports auto-negotiation, fixed link pass through and automatic link restoration for efficient troubleshooting. The AutoCross™ feature in this media converter automatically detects and configures the twisted pair port to the correct MDI or MDI-X configuration..Mini Gigabit Ethernet media converter is a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment.Dimensions: 0.85"H x 1.8"W x 3.3"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one multi mode SC.Power supply: Unit accepts 5 - 28 VDC wall mount AC adapter - 12 VDC 400 mA, Consumption: 3.15 W.LEDs: PWR (power) - (below RJ-45) ON = lit for normal operation, FX-link/act (fiber link/activity) - (upper left on RJ-45), ON = link.IEEE standards: IEEE 802.3.Frame size: 1632 bytes untagged, 1628 bytes tagged.Features auto-MDI/MDIX, auto-negotiation, automatic link restoration, fixed link pass through and space saving design.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets UL, CSA, CISPR22/EN55022 Class A + EN55024, EN60950 Class A, FCC Class A, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

Auto negotiates for speed and duplex. A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting. Powered by a universal AC power supply, a PC's USB port, or the optional rack mountable PowerTray. Auto MDI/MDI-X means you never need to worry about what kind of cable to use. Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2)..Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs.Compact size; measures just 0.8"H x 1.8"W x 3.4"D.Powered by a universal AC power supply or the optional rack mountable PowerTray.Auto MDI/MDI-X means you never need to worry about what kind of cable to use.Converters may also be powered from a USB port using the LHC021A USB power cable

Features The Axiom Mini 10/100/1000Base-TX to 100/1000Base-FX Media Converter Series is a Gigabit Ethernet stand-alone Mini unmanaged media converter that provides cost effective, entry-level media conversion between Copper RJ45 10/100/1000Base-TX ports and 100/1000Base-FX fiber optic ports. Available with an open SFP port or its fixed connector configuration, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Auto-Negotiation Full-Duplex or Half-Duplex Operation Modes Auto-MDI/MDIX Automatic Link Restoration Connect to legacy network equipment Eliminate Collision Domains 10/100/1000Base-TX UTP to 1000Base-FX Fiber media conversion Supports IEEE802.3U IEEE802.3z 1000Base-TX/FX protocols , IEEE802.3ab standards Available with Open SFP Port or optional built in LC/SC/ST Connections DIP switch to set different configurations Compact package size Supports IEEE802.3x flow control; 100Base-FX interface; auto MDI-MDIX function; LFP function.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 1000Base-SX technology get up to 1000Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

Extend Your Network with Fiber The Gigabit Industrial Media Converter provides a cost-effective way to add fiber to your existing network infrastructure. It converts 10/100/1000Base-T(X) to 1000Base-X with ease. Designed for the Toughest Environments This media converter provides consistent network performance in the harshest work environments on earth. It features an operating temperature range of -40° to 158° F and rigid IP-30 housing..DIN-Rail and wall mounting enabled.Relay output to carry capacity of 1A at 24 VDC.Store-and-forward transmission.Jumbo frame up to 10240 bytes.Convert 10/100/1000Base-T(X) to 1000Base-X

The Transition Networks® 2-port RJ-45 to SC mini Gigabit Ethernet media converter is perfect for integrating fiber optic cabling into a 10/100/1000 UTP environment. It features unit and port LEDs for status information. This converter supports auto-negotiation, fixed link pass through and automatic link restoration for efficient troubleshooting. The AutoCross™ feature in this converter automatically detects and configures the twisted pair port to the correct MDI or MDI-X configuration..Mini Gigabit Ethernet media converter is a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment.Dimensions: 0.85"H x 1.8"W x 3.3"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one single mode SC.Power supply: Unit accepts 5 - 28 VDC wall mount AC adapter - 12 VDC 400 mA, Consumption: 3.15 W.LEDs: PWR (power) - (below RJ-45) ON = lit for normal operation, FX-link/act (fiber link/activity) - (upper left on RJ-45), ON = link.IEEE standards: IEEE 802.3.Frame size: 1632 bytes untagged, 1628 bytes tagged.Maximum distance supported: 6.21 mile.Features auto-MDI/MDIX, auto-negotiation, automatic link restoration, fixed link pass through and space saving design.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets UL, CSA, CISPR22/EN55022 Class A + EN55024, EN60950 Class A, FCC Class A, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The E-100BTX-FX-05(HT) is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC).100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power industrial design.Requires power cycling for safe removal.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

The Transition Networks M/GE-ISW series is a hardened Gigabit Ethernet mini media converter that provides cost-effective media conversion between 10/100/1000Base-T RJ-45 port and 100/1000Base-X open SFP slot for hardened or outdoor environments. With its supported operating temperature range of -40 degree Celcius to +75 degree Celcius, the mini converter offers a space-saving alternative for converting copper to fiber in extreme environments..Mini Gigabit Ethernet media converter provides simple and cost-effective integration of copper and fiber equipment.Dimensions: 0.85"H x 1.8"W x 3.3"D.Comes in black.Interfaces: 1 x RJ-45 10/100/1000Base-T, 1 x SFP 100/1000Base-X.Features auto MDI/MDIX, copper and fiber auto-negotiation.Supports fixed full-duplex operation on the fiber port.Offers jumbo frame (up to 10240 bytes) support and active link pass-through for reliable data transfer.Unit and port LEDs allow for quick status information.Supports DC and AC input power via terminal block.Provides overload current and reverse polarity protection.Can be mounted with an included DIN rail clip and Velcro or wall mount bracket (sold separately).Meets or exceeds FCC Class A standard.Lifetime manufacturer limited warranty

TRENDnet's Industrial SFP to Gigabit PoE++ Media Converter (95W), model TI-UF11SFP, converts a long-distance fiber connection to a copper connection while providing power to PoE, PoE+, and PoE++ compliant devices, such as IP cameras, VoIP phones, and wireless access points. This PoE++ media converter is IP50 rated with hardened components for extreme industrial environments and an operating temperature range of -40°- 75° C (-40° - 167° F). The front panel DIP switches control Link Fault Pass Through (LFPT), and setting the device to switch/converter mode. The industrial PoE++ media converter's rugged design also provides protection from shock, freefall, and vibration. DEVICE INTERFACE: 1 x Gigabit PoE++ port (100/1000Mbps); 1 x Gigabit SFP port (100/1000Mbps); 6-pin removable terminal block; LED Indicators; DIP Switch NDAA + TAA COMPLIANT: With NDAA and TAA compliant products, you can plan and install the networking solutions that government customers demand today. (U.S. and Canada only) RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. PoE++ OUTPUT: Converts long-distance fiber to copper while providing up to 95W of power to PoE, PoE+ and PoE++ compliant devices, such as IP cameras and wireless APs. DIP SWITCHES: (1) LFPT (Link Fault Pass Through) on/off (default ON); (2) Converter and Switch mode on/off (default Converter mode) POWER SUPPLY SOLD SEPARATELY: Powers supply sold separately (model: TI-S15052) NDUSTRIAL DESIGN: Designed with a rugged IP50 rated housing, resistance to a high degree of vibration and shock, protection against ESD/EMI/surge, and operates within an extreme operating temperature range of -40° - 75° C (-40° - 167° F). FIBER NETWORKING DISTANCES: Up to 80km fiber networking distances with the TEG-MGBS80 SFP module LINK FAULT PASS THROUGH: Easily enable the LFPT (Link Fault Pass Through) feature on the industrial multi-mode media converter using the front panel DIP switch to identify a link fault to the remote LFPT enabled media converter SURGE PROTECTION: 6kV Ethernet surge protection DIN RAIL & WALL MOUNTS INCLUDED: IP50 rated metal enclosure with included DIN-rail and wall mount hardware GROUNDING POINT: Grounding point protects equipment from external electrical surges ELECTRO MAGNETIC COMPLIANCE: Complies with industrial EMS certifications ESD (IEC 61000-4-2); Contact: 6kV, Air: 8kV; EFT (IEC 61000-4-4): Power 2kV, Signal: 2kV; Surge (IEC 61000-4-5): Power: 2kV, Signal: 2kV.Includes DIN-Rail and wall mounts.Powers supply sold separately (model: TI-S15052).Overload current protection.6kV RJ45 surge protection.Operating temperature range of -40° - 75° C (-40° - 167° F)

This is a media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-X via an open SFP port connector. The open SFP port allows users to customize between the SX, LX, or BX connections. This media converter provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-X, while extending the network reach beyond the 100m reach limitation of copper. This AC/DC powered PoE+ media converter is a Power Sourcing Equipment (PSE), which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, 30 watts max, providing power to IEEE802.3at powered device (PD) over CAT5 and up UTP cable (cable length up to 100 meters / 330 feet). It complies with the IEEE802.3at standard. The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection and LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Our media converters and network interface cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Attach multiple devices together or expand the number of devices connected to your existing network by using 2 transceiver/media converter.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial environments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power design for rugged deployments.1,400,000 hours reliability rating for extended service life.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.) The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Expand your network capabilities with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10 /100 Base-TX technology get up to 100 Mbps data transfer rate over optical fiber cable.With Wall mounting feature, you can conveniently install the device while keeping the wires and cables organized

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media converter for extending Ethernet networks over fiber..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

This Ethernet fiber media converter offers an easy, cost-effective way to extend your network over fiber, using the SFP+ of your choice. It converts a copper RJ45 Ethernet connection to 10 Gigabit fiber, to extend your network over longer distances or connect workstations to switches. Cost-Effective Extensions and Flexible Performance : The RJ45 to fiber media converter provides a cost-efficient way to connect an Ethernet network to remote devices over a fiber backbone. It features an open SFP+ slot that supports the MSA-compliant 10 Gigabit SFP+ that best suits your fiber connection setup (single mode/multimode) and distance requirements. A Versatile Way to Connect Different Networks: The 10Gb fiber media converter supports auto-negotiation while providing versatile connectivity to existing networks and devices, maximizing the usage and performance of legacy equipment. Network Compatibility: 10GBASE-ER. 10GBASE-LR. 10GBASE-LW. 10GBASE-EW. 10GBASE-R. 10GBASE-SR. 10GBASE-SW. 10GBASE-T. Fast and Easy Installation: The unmanaged fiber media converter has a standalone compact design with simple plug-and-play setup to ensure fast and easy installation. StarTech.com Fiber Media Converters: Overcome the distance limitations of traditional network cables with StarTech.com fiber media converters. Our converters connect different types of network cabling and help you extend networks between buildings and over longer distances. Whether you need to extend a network connection 550 m or 40 km, we can help you. The MCM10GSFP Ethernet Fiber Media Converter is backed by a StarTech.com 2-year warranty and free North American based multilingual lifetime technical support..Convert between an RJ45 copper Ethernet connection and a fiber-optic connection to extend your network cost-effectively.Customize the network extension distance to your requirements with virtually any MSA-compliant multimode or single-mode transceiver using the open 10Gb SFP+ slot.10Gbps (10GBASE-T) compatible RJ45 port supports auto-negotiation.Install easily with compact and durable standalone design

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Multimode fiber cable with LC connector for 1000Base‑SX Ethernet connectivity..Media converter used to connect copper Ethernet devices with multimode fiber networks for short‑range transmission.Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

The M/GE-T Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective, entry-level media conversion between 1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and with its small size, it is ideal for locations where space is limited. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Auto-Negotiation.Auto-MDI/MDIX.Automatic Link Restoration

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters. Extend Networks The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 100 meters (328 feet). VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks. Small and Flexible The smaller size and external power supply of the MMC Series allows them to be used almost anywhere. Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Smart Link Restoration Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The MMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.7W of power usage, the MMC Series media converters are some of the most efficient in the market today. Link Test The link test is a fast and easy way for you to test the connections between the media converter ports and the connected end nodes. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and focus your troubleshooting efforts on the right cable or end node..2K MAC address tables.Store-and-forward switching mode.Transparent to IEEE 802.1Q packets.Auto Negotiation and Auto MDI/MDIX on copper port.IEEE support on copper

Transition networks sbftf1013-105-la bridging media converters will provide conversion and integration solutions for half and full-duplex environments..Interfaces/ports: 1 x RJ-45 10/100Base-TX, 1 x SC 100Base-FX.Dimensions: 1"(H) x 3 1/4"(W) x 4.8"(D).Auto-negotiation.Standards: IEEE Std. 802.3.Distance support: 1.24 mile.Operating temperature: 0 - 50 deg C.Humidity: 5 - 95% non - condensing.Altitude: 0 - 10000'.UL listed and CSA certified.Data transfer rate: 10 Mbps, 100 Mbps.Performance class: Fast ethernet.Lifetime limited warranty.Media converter is designed to extend the reach of a 10/100 network.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..LC‑terminated multimode fiber cable supporting 1000Base‑SX Ethernet connections..Media converter used to bridge copper Ethernet connections with multimode fiber networks for reliable short‑distance communication..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box Compact Media Converters make it easy to bring fiber to the desktop. Just connect a Media Converter to your PC's with a cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. This Compact Media Converter allows you to choose from models with an SFP slot, or fixed SC dual-strand multimode fiber or SC dual-strand single-mode fiber connectors. Applications Include: LAN extension. Connect aggregation switches to core switches over fiber. Take fiber to the desktop for PC and VoIP phone connections. Connect network nodes via fiber in high EMI/RFI environments..Fiber links provide EMI/RFI immunity in harsh environments.Auto-cross enables you to use either a straight-through or crossover pinned cable.Autosensing 10/100/1000-Mbps for speed.Link fault detection enables quickly to isolate any breaks.Provides two 10/100/1000-Mbps Copper to 100/1000-Mbps multimode fiber ports

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector via SFP module for flexible Gigabit Ethernet links..Media converter used to bridge copper Ethernet with fiber networks for flexible Gigabit connectivity..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Hot‑swappable SFP slot allows fiber modules to be inserted or replaced without powering down..Equipped with an MSA‑compliant SFP slot, ensuring compatibility with industry‑standard Gigabit fiber modules for versatile connectivity..Backed by a lifetime warranty.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Uses multimode fiber with SC connector type..Media Converter for connecting copper Ethernet to multimode fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector for flexible Gigabit Ethernet connectivity..Media converter used to bridge copper Ethernet connections with fiber networks for flexible Gigabit transmission..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Hot‑swappable SFP slot allows fiber modules to be replaced without powering down the device..MSA‑compliant design ensures compatibility with industry‑standard Gigabit SFP fiber modules..Backed by a lifetime warranty.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Multimode fiber cable with LC connector for 1000Base‑SX Ethernet links..Media converter designed to extend Ethernet connectivity over multimode fiber for dependable short‑distance networking..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.