Electronics Media Converters

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports singlemode fiber cabling with an LC connector for dependable long‑distance Gigabit transmission..Media Converter that extends Ethernet networks over singlemode fiber for long‑distance connectivity..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Provides maximum transmission reach of 10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

The Micro Mini Media Converter is ideal for bringing fiber to the desktop and for mobile applications where light weight, compact size, and low power requirements are critical. Weighing only 2.5 ounces and about the length of a house key, this ultra-compact media converter is portable yet powerful. For extra versatility, it can be USB-powered, making it easy to provide fiber connectivity to locations where AC or DC power is unavailable, for instance, field-deployed fiber-to-the-laptop. For easy portability, this tiny converter conveniently slips into a pocket or laptop carrying case. The converter is plug-and-play with an RJ-45 port that auto negotiates for speed, duplex mode, and crossover functions for PCs with 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet. On the fiber side, the converter has an ST connector for connection to multimode fiber. Because it can be powered through a computer's USB 1.0 or 2.0 port, the Micro Mini Media Converter is ideal for connections to fiber in areas where a spare power outlet may not be available. When plugged into a computer's USB port, the media converter shuts down automatically when you turn off the computer, which saves energy..UTP port supports 10/100/1000BASE-T..Supports Jumbo Ethernet frames up to 10,240 bytes..USB-powered for portability, or use it with the included power adapter..Ultra compact, weighing only 2.5 ounces.

The Transition Networks® SBFTF1013-105-NA 2-port RJ-45 to SC standalone fast Ethernet media/rate converter extends network distance up to 120 Km. It features auto-negotiation for automatic configuration to achieve the best mode of operation over a link and AutoCross™ that automatically detects/configures the twisted pair port to the correct MDI or MDI-X configuration. It supports link pass-through and far end fault for efficient troubleshooting..Stand-alone media/rate converter allows users to integrate fiber optic cabling into 10/100Base-TX copper environments.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10Base-T or 100Base-TX RJ-45, one multi mode SC.Power supply: External AC/DC, 12 VDC, 0.8 A min.LEDs: PWR (power), FD (fiber duplex), LNK/ACT, CD (copper duplex).Data rates: 10 Mbps, 100 Mbps (layer 2).IEEE standards: IEEE 802.3, Switches: Auto-negotiation on/off, half or full-duplex with auto-negotiation off, 10/100 Mbps with auto-negotiation off.Packet size: 2044 bytes untagged, 2048 bytes tagged, RAM buffer: 512KB.Maximum distance supported: 1.24 mile.Features auto-MDI/MDIX, auto-negotiation, link pass through and far-end-fault (FEF) detection.Temperature: 0 - 50 deg C operating, Humidity: 5 - 90 percent non-condensing.Meets UL, FCC Class A, VCCI Class 1, CISPR22/EN55022, Class A, EN55024, EN61000, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

Tripp Lite media converter lets you extend your copper Gigabit Ethernet network connection up to 12.4 miles over fiber optic cable. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-INT-SC-SM with single mode fiber cable to reach greater distances. This could include providing network connectivity to employees in a secluded area of a facility, college or branch office or connecting multiple office workstations to a switch located in a separate building..Gigabit single-mode fiber to Ethernet media converter.Dimensions: 1"H x 3.7"W x 2.76"D.Comes in black.Extends your copper Gigabit Ethernet network past the standard 328' limit.Supports single-mode fiber optic cable with SC connectors.RJ45 jack supports auto-MDI/MDIZ to bridge various network devices.Supports both full- and half-duplex operation.Compact metal converter is easy to install and set up with no software or drivers required.Package includes: media converter, four international plug adapters (North America, UK, Europe, Australia), international power supply (input: 100-240V), and owner's manual.2-year manufacturer limited warranty

This media converter by Tripp Lite converts a single-mode or multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks, and access control devices..Customizable media converter extends power and data to a PoE+ device via fiber cable.Dimensions: 0.98"H x 3.74"W x 2.76"D.Network compatibility: 10/100/1000 Mbps Gigabit Ethernet network.Features a compact black metal housing.PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device.Supports auto-sensing of network speed and other advanced functions, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration.Supports both full- and half-duplex operation.Customizable SFP port supports both 1G single- and multimode transceivers.RJ45 jack supports auto MDI/MDI-X to bridge various network devices.Six LEDs indicate the converter's power, PoE, Ethernet network, and fiber link statuses at a glance.Completely plug-and-play with no additional software required for connection.The included power supply connects to a convenient AC outlet with no computer or other signal source needed.Works in tandem with Tripp Lite N785-Series non-PoE converters (sold separately).Pack includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60 Hz, 1.5A; output: 48V 1.25A), and owner's manual.Meets or exceeds FCC and RoHS standards.2-year manufacturer limited warranty

The StarTech MCM1110MMLC brown 1 Gbps Gigabit Ethernet fiber media converter offers a powerful extended networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access. This converter features a durable metal housing that delivers superior performance. Plug-and-play installation helps for a hassle-free setup. Its compact, lightweight design fits nicely into any carrying case, so you can transport it wherever you go. This media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances..Media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances.Dimensions: 1"H x 8.1"W x 2.8"D.Compatible with campuses, businesses, government facilities, stadiums, or other areas requiring network access.Brown steel enclosure for durability.Has one RJ-45 female and one fiber optic LC duplex female port.Media type supported: optical fiber, twisted pair; fiber mode supported: multi-mode.Network technology: 10/100/1000Base-TX, 1000Base-LX, 1000Base-SX.Provide connectivity for desktop; wall mounting ensures properly centered installation.Data transfer rate: 1 Gbps; fiber optic wavelength: 850 nm; maximum distance supported: 1804.46'; power source: AC adapter; jumbo frame support: 9K.MTBF: > 50000 hours at 25 degrees Celsius.Input/output current: 1 A/2 A; input/output voltage: 100 - 240 VAC/5 VDC; power consumption: 5 W; plug type: N.LED indicators: power, fiber port link/act, copper port link/act, 1000 Mbps.Environmental conditions: 32-122 degrees F; 14-158 degrees F storage; 5-95% RH (non-condensing) humidity.Compact standalone design & wall mounting option for convenient installation; link fault pass (LFP) supported.Contains universal power adapter (NA/EU/UK/AU).Meets RoHS, FCC and CE certifications and standards.Weight: 7.1 oz..2 year warranty.The StarTech brown 1 Gbps Gigabit Ethernet fiber media converter offers connectivity to users in an isolated area of a large complex or in a separate building.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..LC‑terminated multimode fiber cable supporting 1000Base‑SX Ethernet connections..Media converter used to bridge copper Ethernet connections with multimode fiber networks for reliable short‑distance communication..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

Extend Your Network with Fiber This media converter provides a cost-effective way to add fiber to your existing network infrastructure. It converts 10/100/1000Base-T(X) to 1000Base-X with ease. Designed for the Toughest Environments The Gigabit Industrial Media Converter provides consistent network performance in the harshest work environments on earth. It features an operating temperature range of -40° to 158° F and rigid IP-30 housing..Rigid IP-30 housing.Relay output to carry capacity of 1A at 24 VDC.Store-and-forward transmission.Jumbo frame up to 10240 bytes.Convert 10/100/1000Base-T(X) to 1000Base-X

The Omnitron miConverter™ 1239-0-1 miniature transceiver/fiber media converter supports 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U, 1000Base-BX and 1000Base-LX/SX networks. This SFP-type converter enables easy adaptability to different fiber types and supports CWDM technology to increase the bandwidth of fiber infrastructure with speed and distance. It facilitates a plug-and-play option with multi-mode and single-mode optical fiber..Transceiver/media converter supports 10BASE-T, 100BASE-TX, 1000BASE-T, 1000BASE-X and the IEEE 802.3 network specifications.Dimensions: 0.84"H x 1.71"W x 4.1"D.Interfaces/port: 1 x Network (RJ-45), 1 x SFP.Ethernet technology: Ethernet, Fast Ethernet, Gigabit Ethernet.Media type supported: Twisted pair, optical fiber, Network technology: 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U.Form factor: Rack-mountable, desktop, external, wall mountable.Power: 100-240 VAC/60 Hz, 5-12 VDC via 2.5 mm barrel input voltage.Jumbo frame support: Up to 10240 bytes, MTBF: 250000 hours.Supports MDI/MDIX auto-crossover, cost-effective mounting and proven solution.Includes US power supply - 120-240 V/50-60 Hz, velcro strip, user manual.Meets RoHS, WEEE, UL, CE, FCC Class A standards.Comes with lifetime warranty

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Compatible with multi‑mode fiber using LC connectors through SFP module..Gigabit Ethernet media converter for copper‑to‑fiber network extension..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

The Transition Networks® 2-port RJ-45 to SC mini Gigabit Ethernet media converter is perfect for integrating fiber optic cabling into a 10/100/1000 UTP environment. It features unit and port LEDs for status information. This converter supports auto-negotiation, fixed link pass through and automatic link restoration for efficient troubleshooting. The AutoCross™ feature in this converter automatically detects and configures the twisted pair port to the correct MDI or MDI-X configuration..Mini Gigabit Ethernet media converter is a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment.Dimensions: 0.85"H x 1.8"W x 3.3"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one single mode SC.Power supply: Unit accepts 5 - 28 VDC wall mount AC adapter - 12 VDC 400 mA, Consumption: 3.15 W.LEDs: PWR (power) - (below RJ-45) ON = lit for normal operation, FX-link/act (fiber link/activity) - (upper left on RJ-45), ON = link.IEEE standards: IEEE 802.3.Frame size: 1632 bytes untagged, 1628 bytes tagged.Maximum distance supported: 6.21 mile.Features auto-MDI/MDIX, auto-negotiation, automatic link restoration, fixed link pass through and space saving design.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets UL, CSA, CISPR22/EN55022 Class A + EN55024, EN60950 Class A, FCC Class A, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has RJ45 ST multimode connector to connect variety of devices. Converter has coarse wave division multiplexing technology to enhance the bandwidth of fiber..Interfaces/ports: 1 x Network (RJ-45), 1 x ST duplex port.Media type supported: Twisted pair, optical fiber, Fiber mode supported: Multi-mode, Fiber optic wavelength: 850 nm, Maximum distance supported: 1804.46'.Communication: Ethernet, Fast Ethernet, Gigabit Ethernet technology, Network technology: 10/100/1000Base-T, 1000Base-SX.Input voltage: 120 VAC.Cable types: Copper: EIA/TIA 568A/B, Cat 5 UTP and higher, Fiber: Multimode: 50/125micrometer, 62.5/125micrometer, single-mode: 9/125micrometer, Frame size: Up to 10240 bytes.Frame size: Up to 10240 bytes.Form factor: Rack-mountable, desktop, external, wall mountable.Dimensions: 1"H x 3"W x 4"D.Temperature: 0 - 50 deg C (commercial), -40 - 60 deg C (wide), -40 - 80 deg C (storage), Humidity: 5 - 95% (non-condensing), Altitude: -100 - 4000 m.Fiber port supports multimode and single-mode fiber with ST and SC connectors and single-fiber with SC connectors, User-selectable link modes for quick fault detection.Provides remote fault Indicators to signal loss of link for far-end fault and link fault conditions, Loopback mode supports end-to-end testing.Diagnostic and DIP-switch configurations are displayed with status LEDs for quick and easy installation.Includes FlexPoint GX/T ST multimode 550m US AC powered, US power supply - 120 V/60 Hz, user manual.Certifications and standards: EIA/TIA 568A/B, Compliance: UL, CE, FCC Class A, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3z 1000BASE-X, IEEE 802.3ab 1000BASE-T, RoHS, WEEE.Weight: 6 oz..Warranty: Lifetime limited.Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has gigabit ethernet technology to offer superior ethernet frame transfer.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector for 1000Base‑LX Ethernet networking..Media converter used to connect copper Ethernet devices to single‑mode fiber networks for extended distance transmission.Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

Overcome PoE limitations with the next-generation Ubiquiti Networks FiberPoE, model F-POE-G2. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs..Media converter is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device.Dimensions: 7.73"H x 3.68"W x 1.28"D.Comes in white and made of polycarbonate.Provides Gigabit bidirectional data transport between twisted-pair Ethernet cable and fiber optic cable; injects DC power to the Ethernet cable for passive PoE.Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the media converter delivers enhanced surge protection.The added GDT support effectively protects against lightning and other power surges.Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI).Data integrity is sustained in runs beyond 100m, the limit of Ethernet over a twisted-pair cable.Supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.PoE output: PoE RJ45 port, two-pair (4, 5+; 7, 8-) (24VDC) or four-pair (24VDC or 50VDC) PoE.DC output: 2-wire (24VDC or 50VDC) terminal block.Input DC voltage: 16V to 57V.LED: white - power on, blue - connected, blue (flashing) - activity.Operating temperature: -40 degrees Fahrenheit to 140 degrees Fahrenheit.Operating humidity 10% to 95% noncondensing.ESD/EMP protection: +/- 24kV contact/air for Ethernet.Meets or exceeds CE, FCC, IC standards

Meet the connectivity needs of your deployment. This media converter converts 10/100/1000BASE-TX to 1000BASE-SX. Includes broadcast storm control, flow control, and CRC error checking..Switch Type Pure Networking Transceiver Media Converter.Port or Interface RJ-45, SC Duplex Ports.Compliant to EN60950, UL62368, and EN62368.Converts 10/100/1000BASE-TX to 1000BASE-SX.Dimensions H 1" x W 3.7" x L 2.7".Limited Warranty

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports singlemode fiber cabling with a duplex SC connector type for long‑distance Ethernet links..Media Converter used to bridge copper Ethernet with singlemode fiber for extended network connectivity..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector via SFP module for flexible Gigabit Ethernet links..Media converter used to connect copper Ethernet devices with fiber networks for reliable Gigabit data transfer..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Hot‑swappable SFP slot enables quick fiber module changes without shutting down the device..MSA‑compliant SFP slot supports industry‑standard Gigabit fiber modules for broad compatibility..Backed by a lifetime warranty.

Startech.com® Fiber to Ethernet media converter supports a maximum multimode fiber optic cable distance of 2 km. Converter provides a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations..Interface/ports: 1 x RJ-45 female, 1 x fiber-optic SC female.Dimensions: 0.8"(H) x 3"(W) x 3.7"(L).Compatibility: PC.Connectivity technology: Wired.Form factor: External.Black.Fiber optic mode: Multi-mode, half/full-duplex.Max transfer distance: 2 km (1.2 mi).Data transfer rate: 10/100Mbps.Indicators: 1xethernet link and activity (ON ethernet link OK, blinking activity on ethernet link), 1xFEF [far-end fault](on fault detected, off no fault, 1 x fiber link and activity (on fiber link OK, blinking activity on fiber link).Environment conditions: Operating temperature: 0 - 50 deg C, Storage temperature: -10 - 70 deg C, Humidity: 10 - 90% RH.Input voltage: 115 AC.Output voltage: 12 DC, output current: 0.2A.Center tip polarity: Positive.Includes 1 x media converter, 1 x power adapter, 1 x user's manual.Certifications and standards: RoHS.Weight: 3.2 oz..Warranty: 2 years limited.Startech.com® Fiber to Ethernet media converter creates an economical, cost-effective Ethernet-fiber link and fully complies with applicable IEEE 802.3 standards.

Use multiple ways. The Media Converter Network Interface Device, (2) 10-/100-/1000-Mbps Copper to (2) SFP is a carrier-class DIN-rail switch that has the versatility to handle many applications at the edge of your network. Two autosensing 10-/100/1000-Mbps ports plus two autosensing 100-/1000-Mbps SFP slots in an intelligent switch enable you to use the Media Converter Network Interface Device for managed fiber termination, fiber drop and insert, fiber repeater, fiber mode conversion, and dual independent copper-to-fiber media conversion with automatic failover. Copper and/or fiber switch. You can use the Device as a copper/fiber or all copper switch. The versatility is in the SFP slots. As a copper/fiber switch, you can have two 10-/100-/1000-Mbps copper ports and two autosensing 100-/1000-Mbps fiber SFP ports. But the SFPs also support 10-/100-10000-Mbps copper operation. So if you insert two copper SFPs, you will have an entirely copper switch. Double-duty media conversion. For more application diversity, the device gives you media conversion flexibility for distance extension. You can install it as a dual copper/fiber media converter then use it as two independent converters, saving a bundle in equipment costs. Double-duty mode conversion with redundant 1+1 protection. You can deploy this Device as a 4-port device with fiber redundancy. And it gives you two different mode conversions to choose from 1+1 Non-Revertive and 1+1 Revertive. Both relate to how the box responds if a primary link fails. In Non-Revertive mode, the box will continue to use the backup fiber link after the failure on the primary link has been fixed. In Revertive mode, the box will revert to the primary link. The SFP slots auto-detect 100- or 1000-Mbps SFPs and comply with SFP Multi-Source Agreements standards (MSA) for complete compatibility with all standard SFPs. Hardened for the edge of your network. It's designed for industrial use, featuring an extended temperature range of -40 to +185° F (-40 to +85° C) plus dual DC power (-48 VDC or 5-24 VDC). Fully manageable. The switch is fully manageable via CLI or SNMP. The switch has a mini-serial (RS-232) console management port that is accessed via the included mini-jack to DB9F cable. DIN mounting requires the DIN Rail Clip (LXC-DR) (sold separately)..Manage via CLI or SNMP.Jumbo frame support up to 10,240 bytes..Supports 155-Mbps and 1250-Mbps SFPs..Extended temperature range of -40 to +185° F (-40 to +85° C)..Includes AC power adapter or dual DC power inputs

BLACK BOX Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. Choose from multimode and single-mode duplex fiber versions. For extra versatility, you can power the Miniature Media Converter through the external AC power supply included with each converter or through the optional rackmount PowerTray (sold separately)..Powered by a universal AC power supply or the optional rack mountable PowerTray..Compact size; measures just 0.8"H x 1.8"W x 3.4"D..Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media converter for extending Ethernet networks over fiber..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Fiber links provide EMI/RFI immunity in harsh environments. Supports Link Fault Pass-Through (LFPT) for troubleshooting fault conditions on the interfaces. Auto negotiates line speed (100- or 1000-Mbps). Auto-cross enables you to use either a straight-through or crossover pinned cable. Supports jumbo frames for multimedia applications. Choose from models with an SFP slot, or fixed SC dual-strand multimode fiber or SC dual-strand single-mode fiber connectors. Applications include: LAN extension. Connect aggregation switches to core switches over fiber. Take fiber to the desktop for PC and VoIP phone connections. Connect network nodes via fiber in high EMI/RFI environments..Supports jumbo frames for multimedia applications..Auto negotiates line speed (10-, 100- or 1000-Mbps)..Supports Link Fault Pass-Through (LFPT) for troubleshooting fault conditions on the interfaces.

The Transition Networks M/GE-ISW series is a hardened Gigabit Ethernet mini media converter that provides cost-effective media conversion between 10/100/1000Base-T RJ-45 port and 100/1000Base-X open SFP slot for hardened or outdoor environments. With its supported operating temperature range of -40 degree Celcius to +75 degree Celcius, the mini converter offers a space-saving alternative for converting copper to fiber in extreme environments..Mini Gigabit Ethernet media converter provides simple and cost-effective integration of copper and fiber equipment.Dimensions: 0.85"H x 1.8"W x 3.3"D.Comes in black.Interfaces: 1 x RJ-45 10/100/1000Base-T, 1 x SFP 100/1000Base-X.Features auto MDI/MDIX, copper and fiber auto-negotiation.Supports fixed full-duplex operation on the fiber port.Offers jumbo frame (up to 10240 bytes) support and active link pass-through for reliable data transfer.Unit and port LEDs allow for quick status information.Supports DC and AC input power via terminal block.Provides overload current and reverse polarity protection.Can be mounted with an included DIN rail clip and Velcro or wall mount bracket (sold separately).Meets or exceeds FCC Class A standard.Lifetime manufacturer limited warranty

Industrial Fiber to Ethernet Media Converter - 1Gbps SFP to RJ45/ Cat6 - Singlemode/Multimode Optical Fiber to Copper Gigabit Network - 12-56V DC - IP-30/ -40 to +75C (IMC1GSFP).INDUSTRIAL FIBER TO ETHERNET MEDIA CONVERTER: Extends & converts 1Gbps fiber to RJ45 copper w/ hardened operating temp -40C to 75C; powered by 12V-56V DC for compatibility with solar, auto & rail.OPEN SFP SLOT: Compatible with any standard SFP and can be used for multimode or single mode fiber connections; easy deployment across applications, fiber distances or fiber cable types.ROBUST DESIGN: Industrial Gigabit Network Media Converter w/MTBF of 500,000+ hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; this media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 1 Gbps | 12V-56VDC | Single Mode SMF & Multi-Mode MMF Fiber | 16K Jumbo Frames | LFP | IP-30 Housing | DIN or Wall Mountable | Terminal Block and/or Barrel Adapter for power redundancy.Gigabit Media Converter | SFP to RJ45 (Cat6) | MTBF: 500,000+hrs @ 50°C | 12V-56VDC

The E-100BTX-FX-06 is a stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Singlemode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).15,000–20,000 meters (15–20 km) over singlemode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX singlemode fiber.Lifetime Limited Warranty

Install the StarTech.com fiber media converter on your network to connect isolated locations within the same building or in other buildings to your network safely and securely. The advanced security features of the media converter provide a secure connection that meets government standards, making it an excellent choice when EMI is not acceptable..Interfaces/ports: 1 x RJ-45, 1 x LC.Dimensions: 0.8"(H) x 3.7"(W) x 6.3"(L).Compatibility: ETCHS2U rack mount chassis.Supports stand alone operation, or installation into the ETCHS2U rack mount chassis.SFP can be removed from the unit, for replacement or swapping to a different specification.Advanced features include link-loss forwarding, remote monitor status, two frame lengths.Operating temperature: 0 - 60 deg C, storage temperature: -10 - 70 deg C.Humidity: 10 - 90%.Supports full or half-duplex operation.Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether.Perfect for secure connections required by government agencies where EMI is not acceptable.Connect traffic control/monitoring systems at extreme distances to the main office.Performance class: Gigabit Ethernet.Form factor: Rack-mountable, desktop.Link loss forwarding, remote status monitoring ensures maximum up-time.Provides Ethernet to fiber conversion as a standalone device, or can be installed into the ETCHS2U 20 slot chassis for added versatility.Rugged steel casing for durability in harsh environments.StarTech.com Fiber Media Converter - Standalone or Rack-Mount Installation

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector, providing compatibility with both multimode and singlemode fiber cabling for flexible deployment options..Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Offers selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX).Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber.Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX).Lifetime Limited Warranty

The E-100BTX-FX-05(HT) is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC).100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power industrial design.Requires power cycling for safe removal.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media Converter designed to convert copper Ethernet (RJ‑45) to fiber optic (LC), enabling extended network reach and dependable connectivity..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.55 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Features The Axiom Mini 10/100/1000Base-TX to 100/1000Base-FX Media Converter Series is a Gigabit Ethernet stand-alone Mini unmanaged media converter that provides cost effective, entry-level media conversion between Copper RJ45 10/100/1000Base-TX ports and 100/1000Base-FX fiber optic ports. Available with an open SFP port or its fixed connector configuration, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Auto-Negotiation Full-Duplex or Half-Duplex Operation Modes Auto-MDI/MDIX Automatic Link Restoration Connect to legacy network equipment Eliminate Collision Domains 10/100/1000Base-TX UTP to 1000Base-FX Fiber media conversion Supports IEEE802.3U IEEE802.3z 1000Base-TX/FX protocols , IEEE802.3ab standards Available with Open SFP Port or optional built in LC/SC/ST Connections DIP switch to set different configurations Compact package size Supports IEEE802.3x flow control; 100Base-FX interface; auto MDI-MDIX function; LFP function.Attach multiple devices together or expand the number of devices connected to your existing network by using 2 transceiver/media converter.With 1000Base-LX technology get up to 1000Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

The Transition Networks® SGFEB1040-130-NA 1-port RJ-45 to SFP standalone fast Ethernet media/rate converter features auto negotiation, autocross, link pass through, far end fault and remote fault detect for efficient troubleshooting. It supports multimode or single mode fiber and IEEE802.3az Ethernet. This converter offers data rate of 10/100/1000 Mbps for copper and 1000 Mbps for fiber..Stand-alone media/rate converter is a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one 100/1000Base-X SFP slot.Power supply: 7.5 - 24 VDC, provided by wide input AC wall mount adapter, Consumption: 2.2 W.LEDs: PWR (power), LACT (fiber link/activity), RJ-45 upper left (green/amber), RJ-45 upper right (speed).Data rates: 10/100/1000 Mbps (copper), 1000Mbps, 100Mbps also supported via SFP port (fiber).Form factor: Rack-mountable, wall mountable, rail-mountable, desktop.IEEE standards: IEEE 802.3, 802.3ab, 802.3u, 802.3z, 802.3az, Switches: Auto-negotiation enable/disable, link pass through enable/disable.Frame size: 10260 byte jumbo frames, RAM buffer: 512KB, MAC addresses: 8K.Features auto-MDI/MDIX, auto-negotiation, link pass through, far-end-fault (FEF) detection and remote fault detect.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets EN55022 Class A, EN55024, FCC Class A, CE Mark, UL, UL60950, CSA certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Provides flexible throughput options of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends network reach up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX).Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with modern switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber components and simplifying sourcing and replacement..Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX), ensuring dependable signal transmission across different fiber types..Lifetime Limited Warranty

This is a mini media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-SX via a 850nm multi-mode fiber (MMF) SC connector, which allows distance reach up to 550m. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper and saving space (3.75" x 2.25" x 1"). Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

Extend copper via fiber Get your copper-based network where it needs to go. This media converter lets you extend your copper-based network via fiber to a maximum distance of 60 km through the use of an SFP, providing your deployment with the connectivity it needs. Support multiple standards Meets whatever standard you need it to. It's fully compliant with IEEE802.3, IEEE802.3U, 10/100BASE-TX and 100BASE-FX. Straightforward installation The media converter can be installed into a standard converter chassis. The installation is quick and easy. Status updates Know how your media converter is performing. Operation status can be locally monitored through a set of diagnostic LEDs located on the front panel. Know link media issues immediately Features helpful Link Fault Pass-Through (LFP) functionality. LFP immediately alarms administrators to the problem with the link media and provides an efficient solution to monitor the net..Flow Control: IEEE802.3x flow control for full duplex mode..One RJ45 port and one SFP slot.Use as a standalone unit or with the available chassis (LHGC-RACK)..Know operation status through LEDs on front panel.Fully compliant with IEEE802.3, IEEE802.3U, 10/100BASE-TX, 100BASE-FX

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential; NDAA Compliant, TAA Compliant.Pause.Auto-MDI/MDIX.Link Pass Through.Far-End-Fault Detection.Auto-Negotiation

Convert quickly and easily Convert 10GBASE-T to 10GBASE-R without hassle. The bridge media converter is designed with a 10GBASE Ethernet PHY chip that connects these two segment types smoothly. Support for a variety of media The converter supports 1000BASE-T: CAT5 UTP/STP. MAX 100m; 2.5GBASE-T: CAT5e UTP/STP. MAX 50m; 5GBASE-T: CAT5e UTP/STP. MAX 50m; and 10G BASE-T: CAT6a UTP/STP. MAX 50m..Standalone media converter (not to be used with chassis).Standards include 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T, 1000BASE-X, 2500BASE-X, 5GBASE-R and 10GBASE-R.12V DC power supply.RJ45 port type and a SFP slot.Smoothly converts 10GBASE-T to 10GBASE-R

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial environments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power design for rugged deployments.1,400,000 hours reliability rating for extended service life.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Provides selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX), supporting both medium‑range and long‑range deployments..Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with modern switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber components and simplifying sourcing and replacement..Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX), ensuring dependable signal transmission across different fiber types..Lifetime Limited Warranty

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media Converter for bridging copper Ethernet to fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Hot Swappable SFP fiber modules can be inserted or removed without powering down..Accepts industry‑standard MSA SFP transceivers for broad compatibility..Rated for approximately 250,000 hours of reliable operation.

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential. NDAA Compliant, TAA Compliant.Remote Fault Detect.Transparent Link Pass Through.Automatic Link Restoration.Copper & Fiber Auto-Negotiation.Auto-MDI/MDIX

Autosensing copper ports make them perfect for migrating networks. Accepts 1250-Mbps SFPs. Use as standalone media converters or rackmount in the optional PowerTray. Powered by its universal AC power supply, a PC's USB port, or the optional rack mountable PowerTray. Auto MDI/MDI-X means you never need to worry about what kind of cable to use. Easy to install. Just plug and play. Compact size. Uses inexpensive CAT5e twisted-pair cable on the copper side. Features Link Fault Pass-Through (LFPT). This Black Box Multipower Miniature Media Converter links 10-, 100-, or 1000-Mbps copper segments to 1000 Mbps fiber cabling. An SFP port enables you to use an SFP to link the converter to fiber cable. Choose from multimode and single-mode SFPs. With a single-mode SFP, the media converter supports distances up to 80 kilometers (49.7 mi.), depending on the model you order. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (which plugs into a PC's USB port and is sold separately), or through the optional rackmount PowerTray (sold separately). The PowerTray provides power for up to 18 converters in only 5U of rack space. Rackmount ears are included..Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs.Compact size; measures just 0.8"H x 1.8"W x 3.4"D.Powered by a universal AC power supply or the optional rack mountable PowerTray.Auto MDI/MDI-X means you never need to worry about what kind of cable to use

Auto negotiates for speed and duplex. A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting. Powered by a universal AC power supply, a PC's USB port, or the optional rack mountable PowerTray. Auto MDI/MDI-X means you never need to worry about what kind of cable to use. Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2)..Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs.Compact size; measures just 0.8"H x 1.8"W x 3.4"D.Powered by a universal AC power supply or the optional rack mountable PowerTray.Auto MDI/MDI-X means you never need to worry about what kind of cable to use.Converters may also be powered from a USB port using the LHC021A USB power cable

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box® Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2). Media Converter Fast Ethernet Single Mode 1310nm 40km ST. 10/100Mbps copper to 100Mbps fiber. Typical Enterprise applications include LAN extension, fiber mode conversion, or Ethernet speed conversion. These media converters feature a small metal enclosure that can be used stand alone or inserted into a high density rack mount chassis, LHC018A-AC-R2. Converters include an external 100-240VAC power adapter with US and Europe plug clips. Converters may also be powered from a USB port using the LHC021A USB power cable. The LHC018A-AC-R2 chassis is 1.5U high, has slots for up to 18 media converters, and includes a 100-240VAC power supply. The media converters are unmanaged, plug and play with no configuration..Brings fiber to the desktop more conveniently and at a lower cost than installing fiber NICs..Connects Ethernet or Fast Ethernet to fiber optic cable..Compact size-measures just 0.8"H x 1.8"W x 3.4"D..Auto negotiates for speed and duplex..A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting.

This is a mini media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-SX(ST) via a 850nm multi-mode fiber (MMF) ST connector, which allows distance reach up to 550m. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper. Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Expand your network capabilities with this 2 transceiver/media converter.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Offers selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX).Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber components.Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX), ensuring dependable signal transmission across different fiber types..Lifetime Limited Warranty

Features The Axiom Mini 10/100/1000Base-TX to 100/1000Base-FX Media Converter Series is a Gigabit Ethernet stand-alone Mini unmanaged media converter that provides cost effective, entry-level media conversion between Copper RJ45 10/100/1000Base-TX ports and 100/1000Base-FX fiber optic ports. Available with an open SFP port or its fixed connector configuration, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Auto-Negotiation Full-Duplex or Half-Duplex Operation Modes Auto-MDI/MDIX Automatic Link Restoration Connect to legacy network equipment Eliminate Collision Domains 10/100/1000Base-TX UTP to 1000Base-FX Fiber media conversion Supports IEEE802.3U IEEE802.3z 1000Base-TX/FX protocols , IEEE802.3ab standards Available with Open SFP Port or optional built in LC/SC/ST Connections DIP switch to set different configurations Compact package size Supports IEEE802.3x flow control; 100Base-FX interface; auto MDI-MDIX function; LFP function.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 1000Base-SX technology get up to 1000Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

The SISTG10xx-211-LRT-B Series is a new generation of unmanaged hardened Gigabit Ethernet media converter. The converter can provide multimode or single mode fiber connections with fixed SC connectors for extending the Ethernet service distance over fiber. The converter also has a SFP version that provides the ultimate flexibility to choose the appropriate SFP module to match your communication and distance needs. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified with UL Class 1 Division 2 to operate reliably in hazardous locations such as Oil & Gas, manufacturing, and the chemical industry..Auto-MDI/MDIX.Link Pass Through.Extended operating temperature (-40°C to 75°C).Dual, Redundant, 12-48 VDC Power Inputs.Reverse Polarity Power Input Protection