Ethernet Media Converters

The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.  Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper.  Fiber also protects your data from external sources of noise and interference, improving network performance..Total Number of Ports: 2.Network (RJ-45): Yes.DVI: No

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset. )The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Total Number of Ports: 2.Network (RJ-45): Yes.DVI: No

Lantronix stand-alone media converter provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it perfect for applications where low latency is essential..This stand-alone media converter provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments.Compatible with all 100Mbps SFP modules.Dimensions: 1"H x 3"W x 4.7"D.Comes in black.Can be used in pairs or as a single unit to integrate fiber into a 100base copper environment.Supports auto-negotiation, auto-MDI/MDIX, and automatic link restoration.External AC/DC power supply required (not included): 120-240VAC input, 12VDC output.Power consumption: 1.75W.Meets or exceeds the FCC Class A, EN55024, EN55022 Class A, EN61000, and CE Mark standards.Lifetime manufacturer limited warranty

The Transition Networks® SGFEB1013-130-NA Ethernet media converter offers data rates up to 10/100/1000 Mbps on copper and 1000 Mbps on fiber ports. It integrates 1000Base-SX/LX fiber into a 10/100/1000Base-T copper to extend the network distance longer. This Ethernet media converter features AutoCross™ and Link Pass through technology. While the twisted pair ports on converter automatically detect the correct MDI or MDI-X configuration and monitors the loss of signal in fiber and copper ports..Media converter is an integration and conversion solutions for half and full-duplex environments.Dimensions: 1"H x 3.3"W x 4.8"D.Comes in black color.Interface: One RJ-45, one female SC.Fiber mode: Multi-mode fiber (MMF).Supports data transfer rate up to 1 Gbps and features diltering addresses of 8K entries.Connectivity technology: Wired, Operating distance: 721.78'.Wavelength: 850 nm, Indicators: Link/activity, port duplex mode, port transmission speed, power.Supports 50/125um, 62.5/125um standard optical fiber/twisted pair media for data transmission using Gigabit Ethernet technology.Power: 2.2 W consumption, Form Factor: Desktop, rack-mountable, rail-mountable, wall mountable.Features indicators for auto-negotiation, AutoCross, built-in DIP switch, energy efficient Ethernet, far end fault and half duplex mode.Offers jumbo frames support and link pass-through for reliable data transfer.Secures data from external sources of noise and interference and improves network performance.Meets RoHS and WEEE standards.Weight: 8.8 oz..Comes with lifetime warranty

The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters. Extend Networks The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 100 meters (328 feet). VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks. Small and Flexible The smaller size and external power supply of the MMC Series allows them to be used almost anywhere. Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Smart Link Restoration Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The MMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.7W of power usage, the MMC Series media converters are some of the most efficient in the market today. Link Test The link test is a fast and easy way for you to test the connections between the media converter ports and the connected end nodes. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and focus your troubleshooting efforts on the right cable or end node..2K MAC address tables.Store-and-forward switching mode.Transparent to IEEE 802.1Q packets.Auto Negotiation and Auto MDI/MDIX on copper port.IEEE support on copper

Perle Media converter provide an economical path to extend the distance of an existing network. Media converter features full duplex capability, auto-negotiation and auto-uplink..Network adapter speed: 1 Gbps.Connect 10/100 devices to gigabit backbone.Operating temperature: 32 - 122 deg F, Operating humidity: 5 - 90%.Dimensions: 1"(H) x 3.1"(W) x 4.7"(D).Form factor: External, rack mountable.Data link protocol: Gigabit ethernet.Connectivity technology: Wired.Cabling type: 1000Base-T, 1000Base-X, 100Base-X.Extend network distances.Power consumption operational: 3 W.Auto negotiation, auto uplink (auto MDI/MDI-X), smart missing link (SML), half duplex mode, full duplex mode, jumbo frames support.Compliant st and ards: IEEE 802.3ab, IEEE 802.3x, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55024, EN55022 Class A, RoHS, UL 60950-1, WEEE, FCC Part 15 A, IEC 60825-1.Perle Media converter allows for more efficient troubleshooting and less on-site maintenance providing high performance.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Uses multimode fiber with SC connector type..Media Converter for connecting copper Ethernet to multimode fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

The StarTech MCM1110 Gigabit Ethernet fiber media converter has a compact standalone design and wall mounting option to provide easy and worry-free installation. This converter features a durable metal housing that delivers superior performance. Plug-and-play installation helps for a hassle-free setup. Its compact, lightweight design fits nicely into any carrying case that lets you carry wherever you go. This media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances..Gigabit ethernet fiber media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances.Dimensions: 1"H x 2.8"W x 3.7"L.Compatible with networks 10/100/1000 Mbps.Brown steel enclosure for durability.Maximum data transfer rate: 1 Gbps, MTBF: > 50000 hours at 25 deg C, Fiber type: Multi mode, single mode, Fiber operating mode: Full-duplex.Has one RJ-45 female and one SFP slot female connector.LED indicators: 1 x power, 1 x fiber port link/act, 1 x copper port link/act, 1 x 1000 Mbps.Power: 1 A input current, 100 - 240 VAC input voltage, 2 A output current, 5 VDC output voltage, Plug type: N, Power consumption: 5 W max.Form factor: Desktop/wall mountable.Temperature: 32 - 122 deg F operating, 14 - 158 deg F storage, Humidity: 5 - 95% RH (non-condensing).10/100/1000 Mbps compatible RJ45 port supports auto negotiation to bridge different network speeds and devices to a Gigabit fiber network.Compact standalone design and wall mounting option offers easy and convenient installation.Converter offers a powerful networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access.Supports Auto MDIX and 9K jumbo frame.Gigabit Open SFP slot to customize the network extension distance to your requirements with virtually any MSA-compliant multi/single mode transceiver.Contains universal power adapter (NA/EU/UK/AU).Meets IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX certification and standards.Weight: 6.5 oz..Comes with 2 years limited warranty.The StarTech Gigabit Ethernet fiber media converter with open SFP slot offers connectivity to users in an isolated area of a large complex or in a separate building.

The Transition Networks® SGFEB1040-130-NA 1-port RJ-45 to SFP standalone fast Ethernet media/rate converter features auto negotiation, autocross, link pass through, far end fault and remote fault detect for efficient troubleshooting. It supports multimode or single mode fiber and IEEE802.3az Ethernet. This converter offers data rate of 10/100/1000 Mbps for copper and 1000 Mbps for fiber..Stand-alone media/rate converter is a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one 100/1000Base-X SFP slot.Power supply: 7.5 - 24 VDC, provided by wide input AC wall mount adapter, Consumption: 2.2 W.LEDs: PWR (power), LACT (fiber link/activity), RJ-45 upper left (green/amber), RJ-45 upper right (speed).Data rates: 10/100/1000 Mbps (copper), 1000Mbps, 100Mbps also supported via SFP port (fiber).Form factor: Rack-mountable, wall mountable, rail-mountable, desktop.IEEE standards: IEEE 802.3, 802.3ab, 802.3u, 802.3z, 802.3az, Switches: Auto-negotiation enable/disable, link pass through enable/disable.Frame size: 10260 byte jumbo frames, RAM buffer: 512KB, MAC addresses: 8K.Features auto-MDI/MDIX, auto-negotiation, link pass through, far-end-fault (FEF) detection and remote fault detect.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets EN55022 Class A, EN55024, FCC Class A, CE Mark, UL, UL60950, CSA certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters. Extend Networks The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 100 meters (328 feet). VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks. Small and Flexible The smaller size and external power supply of the MMC Series allows them to be used almost anywhere. Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Smart Link Restoration Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The MMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.7W of power usage, the MMC Series media converters are some of the most efficient in the market today. Link Test The link test is a fast and easy way for you to test the connections between the media converter ports and the connected end nodes. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and focus your troubleshooting efforts on the right cable or end node..2K MAC address tables.Store-and-forward switching mode.Transparent to IEEE 802.1Q packets.Auto Negotiation and Auto MDI/MDIX on copper port.IEEE support on copper

The Transition Networks® SBFTF1013-105-NA 2-port RJ-45 to SC standalone fast Ethernet media/rate converter extends network distance up to 120 Km. It features auto-negotiation for automatic configuration to achieve the best mode of operation over a link and AutoCross™ that automatically detects/configures the twisted pair port to the correct MDI or MDI-X configuration. It supports link pass-through and far end fault for efficient troubleshooting..Stand-alone media/rate converter allows users to integrate fiber optic cabling into 10/100Base-TX copper environments.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10Base-T or 100Base-TX RJ-45, one multi mode SC.Power supply: External AC/DC, 12 VDC, 0.8 A min.LEDs: PWR (power), FD (fiber duplex), LNK/ACT, CD (copper duplex).Data rates: 10 Mbps, 100 Mbps (layer 2).IEEE standards: IEEE 802.3, Switches: Auto-negotiation on/off, half or full-duplex with auto-negotiation off, 10/100 Mbps with auto-negotiation off.Packet size: 2044 bytes untagged, 2048 bytes tagged, RAM buffer: 512KB.Maximum distance supported: 1.24 mile.Features auto-MDI/MDIX, auto-negotiation, link pass through and far-end-fault (FEF) detection.Temperature: 0 - 50 deg C operating, Humidity: 5 - 90 percent non-condensing.Meets UL, FCC Class A, VCCI Class 1, CISPR22/EN55022, Class A, EN55024, EN61000, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Uses multimode fiber with SC connector type..Media Converter for linking copper Ethernet to multimode fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Multimode fiber cable with LC connector for 1000Base‑SX Ethernet connectivity..Media converter used to connect copper Ethernet devices with multimode fiber networks for short‑range transmission.Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

The StarTech MCM1110MMLC brown 1 Gbps Gigabit Ethernet fiber media converter offers a powerful extended networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access. This converter features a durable metal housing that delivers superior performance. Plug-and-play installation helps for a hassle-free setup. Its compact, lightweight design fits nicely into any carrying case, so you can transport it wherever you go. This media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances..Media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances.Dimensions: 1"H x 8.1"W x 2.8"D.Compatible with campuses, businesses, government facilities, stadiums, or other areas requiring network access.Brown steel enclosure for durability.Has one RJ-45 female and one fiber optic LC duplex female port.Media type supported: optical fiber, twisted pair; fiber mode supported: multi-mode.Network technology: 10/100/1000Base-TX, 1000Base-LX, 1000Base-SX.Provide connectivity for desktop; wall mounting ensures properly centered installation.Data transfer rate: 1 Gbps; fiber optic wavelength: 850 nm; maximum distance supported: 1804.46'; power source: AC adapter; jumbo frame support: 9K.MTBF: > 50000 hours at 25 degrees Celsius.Input/output current: 1 A/2 A; input/output voltage: 100 - 240 VAC/5 VDC; power consumption: 5 W; plug type: N.LED indicators: power, fiber port link/act, copper port link/act, 1000 Mbps.Environmental conditions: 32-122 degrees F; 14-158 degrees F storage; 5-95% RH (non-condensing) humidity.Compact standalone design & wall mounting option for convenient installation; link fault pass (LFP) supported.Contains universal power adapter (NA/EU/UK/AU).Meets RoHS, FCC and CE certifications and standards.Weight: 7.1 oz..2 year warranty.The StarTech brown 1 Gbps Gigabit Ethernet fiber media converter offers connectivity to users in an isolated area of a large complex or in a separate building.

Mini Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The GE-T Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective media conversion between 1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and its small size makes it ideal for locations where space is limited. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Auto-MDI/MDIX.Automatic Link Restoration.Interoperable with other 1000Base-T/SX/LX NICs or switch ports.Status LEDs for easy monitoring.Supports SFP modules

The SISTG10xx-211-LRT-B Series is a new generation of unmanaged hardened Gigabit Ethernet media converter. The converter can provide multimode or single mode fiber connections with fixed SC connectors for extending the Ethernet service distance over fiber. The converter also has a SFP version that provides the ultimate flexibility to choose the appropriate SFP module to match your communication and distance needs. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified with UL Class 1 Division 2 to operate reliably in hazardous locations such as Oil & Gas, manufacturing, and the chemical industry..Auto-MDI/MDIX.Link Pass Through.Extended operating temperature (-40°C to 75°C).Dual, Redundant, 12-48 VDC Power Inputs.Reverse Polarity Power Input Protection

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports singlemode fiber cabling with an LC connector for dependable long‑distance Gigabit transmission..Media Converter that extends Ethernet networks over singlemode fiber for long‑distance connectivity..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Provides maximum transmission reach of 10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

The ME-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments. NDAA Compliant, TAA Compliant.DIN Rail clip and Velcro included.Multiple mounting options:.No configuration required.Available with LC, ST or SC fiber interfaces and available for multimode or single mode fiber.Small mechanical size allows use in enclosures with space constraints

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Provides flexible throughput options of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends network reach up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX).Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with modern switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber components and simplifying sourcing and replacement..Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX), ensuring dependable signal transmission across different fiber types..Lifetime Limited Warranty

This media converter by Tripp Lite converts a single-mode or multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks, and access control devices..Customizable media converter extends power and data to a PoE+ device via fiber cable.Dimensions: 0.98"H x 3.74"W x 2.76"D.Network compatibility: 10/100/1000 Mbps Gigabit Ethernet network.Features a compact black metal housing.PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device.Supports auto-sensing of network speed and other advanced functions, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration.Supports both full- and half-duplex operation.Customizable SFP port supports both 1G single- and multimode transceivers.RJ45 jack supports auto MDI/MDI-X to bridge various network devices.Six LEDs indicate the converter's power, PoE, Ethernet network, and fiber link statuses at a glance.Completely plug-and-play with no additional software required for connection.The included power supply connects to a convenient AC outlet with no computer or other signal source needed.Works in tandem with Tripp Lite N785-Series non-PoE converters (sold separately).Pack includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60 Hz, 1.5A; output: 48V 1.25A), and owner's manual.Meets or exceeds FCC and RoHS standards.2-year manufacturer limited warranty

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Multimode fiber cable with LC connector for 1000Base‑SX Ethernet links..Media converter designed to extend Ethernet connectivity over multimode fiber for dependable short‑distance networking..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports singlemode fiber and utilizes an SC connector type..Media Converter designed to extend Ethernet networks over fiber connections..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector, providing compatibility with both multimode and singlemode fiber cabling for flexible deployment options..Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Offers selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX).Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber.Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX).Lifetime Limited Warranty

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Provides selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX), supporting both medium‑range and long‑range deployments..Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with modern switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber components and simplifying sourcing and replacement..Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX), ensuring dependable signal transmission across different fiber types..Lifetime Limited Warranty

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..1000Base‑SX/LX fiber, SC connector (multimode or single‑mode supported).Stand‑alone Gigabit Ethernet Media Converter, bridges 1000Base‑T copper to 1000Base‑SX/LX fiber.Data Transfer Rate: 1000 Mbps (1 Gbps).Up to 550 m on multimode (SX); up to 10,000 m (10 km) on single‑mode (LX).Gigabit Ethernet supported (1000Base‑T to 1000Base‑SX/LX).Power Consumption 3 Watts (typical).850 nm (SX multimode), 1310 nm (LX single‑mode).Lifetime Limited Warranty

Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has RJ45 ST multimode connector to connect variety of devices. Converter has coarse wave division multiplexing technology to enhance the bandwidth of fiber..Interfaces/ports: 1 x Network (RJ-45), 1 x ST duplex port.Media type supported: Twisted pair, optical fiber, Fiber mode supported: Multi-mode, Fiber optic wavelength: 850 nm, Maximum distance supported: 1804.46'.Communication: Ethernet, Fast Ethernet, Gigabit Ethernet technology, Network technology: 10/100/1000Base-T, 1000Base-SX.Input voltage: 120 VAC.Cable types: Copper: EIA/TIA 568A/B, Cat 5 UTP and higher, Fiber: Multimode: 50/125micrometer, 62.5/125micrometer, single-mode: 9/125micrometer, Frame size: Up to 10240 bytes.Frame size: Up to 10240 bytes.Form factor: Rack-mountable, desktop, external, wall mountable.Dimensions: 1"H x 3"W x 4"D.Temperature: 0 - 50 deg C (commercial), -40 - 60 deg C (wide), -40 - 80 deg C (storage), Humidity: 5 - 95% (non-condensing), Altitude: -100 - 4000 m.Fiber port supports multimode and single-mode fiber with ST and SC connectors and single-fiber with SC connectors, User-selectable link modes for quick fault detection.Provides remote fault Indicators to signal loss of link for far-end fault and link fault conditions, Loopback mode supports end-to-end testing.Diagnostic and DIP-switch configurations are displayed with status LEDs for quick and easy installation.Includes FlexPoint GX/T ST multimode 550m US AC powered, US power supply - 120 V/60 Hz, user manual.Certifications and standards: EIA/TIA 568A/B, Compliance: UL, CE, FCC Class A, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3z 1000BASE-X, IEEE 802.3ab 1000BASE-T, RoHS, WEEE.Weight: 6 oz..Warranty: Lifetime limited.Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has gigabit ethernet technology to offer superior ethernet frame transfer.

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential. NDAA Compliant, TAA Compliant..Remote Fault Detect.Transparent Link Pass Through.Automatic Link Restoration.Copper & Fiber Auto-Negotiation.Auto-MDI/MDIX

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector via SFP module for flexible Gigabit Ethernet links..Media converter used to bridge copper Ethernet with fiber networks for flexible Gigabit connectivity..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Hot‑swappable SFP slot allows fiber modules to be inserted or replaced without powering down..Equipped with an MSA‑compliant SFP slot, ensuring compatibility with industry‑standard Gigabit fiber modules for versatile connectivity..Backed by a lifetime warranty.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector for 1000Base‑LX Ethernet connectivity..Media converter used to bridge copper Ethernet connections with single‑mode fiber networks for long‑distance communication..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

Startech.com® Ethernet media converter has LED indicators for simple ethernet/fiber network link monitoring. Converter offers increased bandwidth and high data throughput by preventing network bottlenecks and congestion..Interfaces/ports: 1 x RJ-45, 1 x ST.Dimensions: 0.8"(H) x 3"(W) x 3.7"(L).Compatibility: 3COM, Cisco, Lucent and Nortel networks.Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion.Supports full or half-duplex operation.Operating temperature: 0 - 50 deg C, storage temperature: -10 - 70 deg C.Humidity: 10 - 90%.lED indicators continuously shows operating status of the converter.Supports link fault pass through (LFP).Supports IEEE 802.3 10Base-T, 802.3 u 100Base-TX and 100Base-FX industry standards.Supports IEEE 802.1 q tag VLAN pass thru.Supports Q in Q double tagged frame transparent.Performance class: Fast Ethernet.Form factor: External.Light weight design can be mounted anywhere.Best value fiber media converter.Easily installed into any scenario with little to no configuration needed.Dimensions: 0.8"(H) x 3"(W) x 3.7"(D).Input voltage: 115 VAC.Output voltage: 12 DC.Output current: 0.2 A, Maximum data transfer rate: 10/100 Mbps.Sensitivity: -31 dBm, Network technology: 10/100Base-TX, 100Base-FX.Supports a maximum multi mode fiber optic cable distance of 2 km.Compatible with 3COM™, cisco™, lucent™ and nortel™ networks.Startech.com® Ethernet media converter improves network scalability by increasing the distances between network points up to 2 km and converts 10/100base-T Ethernet to 100base-FX fiber optic signals.

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media converter for extending Ethernet networks over fiber..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Unidirectional media converters combine one-way communications with the benefits of a copper to fiber media converter. Media converters are a cost-effective, plug-and-play device that allows fiber optic cabling to be connected to copper-based networking equipment. The deployment of fiber adds a layer of security to networks as it is difficult to tap into fiber and go undetected. If threats are attacking a network, the fiber links go down and network administrators are made aware of the problem, providing them the opportunity to address a potential breach of security. Adding unidirectional technology to a media converter creates a physically secure one-way communication channel over fiber between a secure network and an unsecure network. These devices can be used to allow data from a classified, high-security area to be transmitted to a low-security area, while preventing unsecure data from reentering the classified network. An alternate application allows a secure network to be updated with data from an external source while ensuring its critical data is unable to leave the classified area. NDAA Compliant, TAA Compliant.Auto-Negotiation on the 10/100/1000 copper port.Auto-MDI/MDIX configuration.Unit and port LEDs allow for quick status information.Converters use duplex SFP modules but the transmitting converter only uses the TX port on the SFP, while the RX port is deactivated. Likewise the receiving converter only uses the RX port, while the TX port is deactivated.Converters support dual speed 100/1000Mbps SFP modules offering great flexibility to meet network requirements

The E-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments..Far-End-Fault (FEF).DC and AC power inputs via terminal block.Automatic Link Restoration.Active Link Pass Through on SFP version.Auto-MDI/MDIX

Extend Your Network with Fiber The Gigabit Industrial Media Converter provides a cost-effective way to add fiber to your existing network infrastructure. It converts 10/100/1000Base-T(X) to 1000Base-X with ease. Designed for the Toughest Environments This media converter provides consistent network performance in the harshest work environments on earth. It features an operating temperature range of -40° to 158° F and rigid IP-30 housing..DIN-Rail and wall mounting enabled.Relay output to carry capacity of 1A at 24 VDC.Store-and-forward transmission.Jumbo frame up to 10240 bytes.Convert 10/100/1000Base-T(X) to 1000Base-X

Tripp Lite media converter lets you extend your copper Gigabit Ethernet network connection up to 12.4 miles over fiber optic cable. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-INT-SC-SM with single mode fiber cable to reach greater distances. This could include providing network connectivity to employees in a secluded area of a facility, college or branch office or connecting multiple office workstations to a switch located in a separate building..Gigabit single-mode fiber to Ethernet media converter.Dimensions: 1"H x 3.7"W x 2.76"D.Comes in black.Extends your copper Gigabit Ethernet network past the standard 328' limit.Supports single-mode fiber optic cable with SC connectors.RJ45 jack supports auto-MDI/MDIZ to bridge various network devices.Supports both full- and half-duplex operation.Compact metal converter is easy to install and set up with no software or drivers required.Package includes: media converter, four international plug adapters (North America, UK, Europe, Australia), international power supply (input: 100-240V), and owner's manual.2-year manufacturer limited warranty

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..LC‑terminated multimode fiber cable supporting 1000Base‑SX Ethernet connections..Media converter used to bridge copper Ethernet connections with multimode fiber networks for reliable short‑distance communication..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports singlemode fiber cabling with a duplex SC connector for stable long‑distance data transmission..Media Converter designed to link copper Ethernet with singlemode fiber for extended network reach..Provides high‑performance throughput up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber. NDAA Compliant, TAA Compliant.Single‑mode fiber cable with LC connector for long‑distance Ethernet networking..Media converter used to bridge copper Ethernet connections with single‑mode fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

Tripp Lite media converter extends your copper Gigabit Ethernet network connection up to 1804 ft. over LC fiber optic cable with the addition of PoE. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-LC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices..Gigabit multimode fiber to Ethernet media converter.Dimensions: 0.98"H x 3.74"W x 2.76"D.Comes in black.Extends power (48VDC) and data (1Gbps) to any edge PoE+ device.Supports multimode fiber optic cable with LC connectors up to 1804'.RJ45 jack supports auto-MDI/MDIZ to bridge various network devices.Supports both full- and half-duplex operation.Works in tandem with Tripp Lite N785-001-LC-MM (sold separately).Compact metal converter is easy to install and set up with no software or drivers required.Included power supply connects to AC outlets with no computer or other signal source needed.Package includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60Hz, 1.5A; output: 48V, 1.25A), and owner's manual.2-year manufacturer limited warranty

High-quality media conversion Adapt your deployment. This media converter easily converts 10/100BASE-TX to 100BASE-FX-TP-to-ST/SC/VF-45/MT-RJ. Smooth connection This media converter is designed with a switch controller and buffer memory that ensures two segment types connect without issue. Straightforward installation Quick installation and setup. This converter can be used as a standalone unit or as a slide-on module to the 19" converter rack chassis for use in a central wiring closet. Know link media issues immediately Features helpful Link Fault Pass-Through (LFP) functionality. LFP immediately alarms administrators to the problem with the link media and provides an efficient solution to monitor the net..Link fault pass-through functionality.Use as a standalone unit or with available chassis (LHGC-RACK).Switch controller and buffer memory.Converts 10/100BASE-TX to 100BASE-FX

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector for 1000Base‑LX Ethernet networking..Media converter used to connect copper Ethernet devices to single‑mode fiber networks for extended distance transmission.Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.

The E-100BTX-FX-05(HT) is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC).100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power industrial design.Requires power cycling for safe removal.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Single‑mode fiber cable with LC connector for flexible Gigabit Ethernet connectivity..Media converter used to bridge copper Ethernet connections with fiber networks for flexible Gigabit transmission..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Hot‑swappable SFP slot allows fiber modules to be replaced without powering down the device..MSA‑compliant design ensures compatibility with industry‑standard Gigabit SFP fiber modules..Backed by a lifetime warranty.

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media Converter designed to convert copper Ethernet (RJ‑45) to fiber optic (LC), enabling extended network reach and dependable connectivity..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.55 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

Extend Your Network with Fiber This media converter provides a cost-effective way to add fiber to your existing network infrastructure. It converts 10/100/1000Base-T(X) to 1000Base-X with ease. Designed for the Toughest Environments The Gigabit Industrial Media Converter provides consistent network performance in the harshest work environments on earth. It features an operating temperature range of -40° to 158° F and rigid IP-30 housing..Rigid IP-30 housing.Relay output to carry capacity of 1A at 24 VDC.Store-and-forward transmission.Jumbo frame up to 10240 bytes.Convert 10/100/1000Base-T(X) to 1000Base-X

Mini Gigabit Ethernet Media Converter 10/100/1000Base-T to 1000Base-SX/LX The GE-PSW Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective media conversion between 10/100/1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and its small size makes it ideal for locations where space is limited. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Auto-Negotiation.Fixed Full-Duplex on fiber.Auto-MDI/MDIX.Active Link Pass Through.Automatic Link Restoration

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber. NDAA Compliant, TAA Compliant.Designed for singlemode fiber cabling and equipped with a duplex SC connector for reliable long‑distance Ethernet transmission.Media Converter used to connect copper Ethernet to singlemode fiber for long‑distance transmission..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 1310 nm..Backed by a lifetime warranty.