Fluke Network Kits

FTK2000 Network Accessory Kit.Networking Accessory.Part Number: FTK2000.Rigid hard shell is coated with scratch resistant finish for high quality durability

Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.

Fluke Networks Contractor telecom kit features punch down tool for reliable terminations. Contractor telecom kit offers a cable stripper that quickly rings and slits many types of cable..D814 industry standard punch down tool for reliable terminations.Eversharp 66/110 cut blade provides flexibility for different block and jack terminations.Cable stripper quickly rings and slits many types of cable.Cut and strip wire cleaner and faster with the electricians D-snips.Connect to jacks for testing with the standard 4-wire modular adapter.Soft zippered pouch keeps your tools all in one convenient place.Includes a TS 30 test set with angled bed-of-nails cord, D814 impact tool, eversharp 66/110 cut blade, electrician's D-snips, cable stripper, standard 4-wire modular adapter and probe pic.Fluke Networks Contractor telecom kit is made for technicians who install, test and troubleshoot phones and has high impedance datasafe operation.

The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt..Material: Rugged PVC pouch, aluminum stripper.All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt.D914 and D814 industry standard punchdown tools make for solid terminations.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.Cut and strip wire cleaner and faster with the electricians' D-Snips.Six tool kits combinations available for a multitude of applications.D914S impact tool provides fast, comfortable reliable connections to blocks and jacks.D-snips for faster cleaner safer no-slip cutting and stripping.Cable stripper strips outer Jacket of UTP/STP and other flexible cables without damaging wires.Package Contents: Pro-tool kit IS60, D914S impact tool, D-Snips, cable stripper, maglite,sharpie and eversharp 66/110 cut blade.Includes: Pro-Tool Kit IS60, D914S Impact tool, D-Snips, Cable Stripper, Maglite, Sharpie And Eversharp 66/110 Cut Blade

The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

The Fluke Networks® FTK1475 portable fiber verification kit includes implifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, three power meter adapters, reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs and USB interface cable. Kit helps to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults..Fiber verification kit has advanced time-saving features.Complete fiber verification kit is for contractors and network technicians.Use this kit to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults.Include: Simplifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, USB interface cable.Include: Three power meter adapters (SC, ST and LC), reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs

MS2-FTK MicroScanner copper and fiber cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters. Test and verify your fiber connections with the SimpliFiber Pro power meter and light source..Network copper and fiber test kit measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.Dimensions: 1.4"H x 3"W x 6.4"D.Comes in black and yellow.Kit includes: MicroScanner cable verifier and SimpliFiber Pro (FTK1000) fiber test kit (SimpliFiber Pro optical power meter, 850/1300 multimode source, magnetic strap attachments, carrying case, and SC power-meter adapter).Test connectors: shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; MicroScanner2: F-connector for coaxial cable.Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.Features a monochrome LCD with backlight.MicroScanner solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices.MicroScanner PoE: solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco's Universal Power over Ethernet) compatible PoE devices.MicroScanner2 detects the advertised speed of 802.3 Ethernet ports with speeds of 10Mbps, 100Mbps, and 1Gbps.Verifies media services: 10/100/1000 Ethernet, POTS, and PoE.Tone generator produces 500kHz digital, 400kHz and 1kHz analog tones.Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe

Fluke Networks Termination test kit consists of IntelliTone pro probe IS60 pro-tool, multi-language getting started guide, user CDs, battery, deluxe fluke networks carry case. Kit has an approximate weight of 12.8 oz..Reduce test time and user error.Eliminate awkward test adapters.Rule out service problems fast.Locate elusive cables in seconds.Repair or replace tools less often.Environmental parameters: Min operating temperature 32 degree F.Technology: LCD.Color support: Monochrome.Features: Backlight.Connectors: F connector, RJ-45, RJ-11.Compliant Standards: FCC class A, EN 61326-1, EN 61010-1.Cables included: 1 x RJ-45 to RJ-45 patch cable, 1 x RJ-11 cable.Cable type: UTP, FTP, SSTP.Included accessories: Carrying case, lanyard, Pro-Tool kit IS60.Weight: 12.8 lb.Termination test kit.Fluke Networks® Termination test kit with a microscanner2 cable verifier tests all common media types including RJ11, RJ45 and coax without using adapters.

Signal interference from sources in the environment can make tracing cable a frustrating process. The Fluke Networks Pro3000 filtered probe blocks interference and "stops the buzz" by obstructing these signals allowing you to hear the tone you are tracing loud and clear. Probe's ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood, or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. Line cord features angled bed-of-nails clips and a rugged RJ11 plug for direct access to phone and data jacks without adapters. External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs. Use the SmartTone capability of the Pro3000 analog tone generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification up to 10 miles away..Filtered probe and tone generator kit for easy cable tracing.Probe dimensions: 1.6"H x 9.8"W x 1.3"D; tone generator dimensions: 1.4"H x 2.7"W x 2.4"D.Filtered probe comes in yellow and features a black replaceable tip; tone generator comes in blue.Innovative filtered probe obstructs signal of 60Hz and its harmonic frequencies.SmartTone technology provides five distinct tones for precise pair identification.Sends loud tone up to 10 miles on most cables.Slide switch selects continuity or tone mode.Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures.External switch allows for selection of solid or alternating tone options, indicated with solid or flashing LEDs.Supports headset via 3.5mm audio port for use in noisy environments.Angled bed-of-nails clips allow for easy access to individual pairs.RJ11 connector is perfect for use on telephone jacks.Supports switching between filtered and unfiltered modes with one button press.Utilizes an auto-off feature that deactivates the probe after five minutes to conserve battery life.Includes one spare tip.Frequency modes: 1000Hz nominal solid frequency and 1000/1500Hz nominal alternating frequency.Overvoltage protection: 60VDC in tone/polarity mode.Output power in tone mode: 8dBm into 600 ohms.Output voltage level in continuity mode: 8VDC with fresh battery.Both probe and tone generator require a 9V alkaline battery

The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand..Cable analyzer enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system.Cable analyzer dimensions: 11"H x 5.25"W x 2.63"D.Made of high-impact plastic with shock-absorbing overmold, comes in yellow.Kit includes: versiv mainframe & remote, two DSX-5000 CableAnalyzer modules, set of Cat 6A/Class EA permanent link adapters, set of Cat 6A/Class EA channel adapters, two headsets, two handstrap, two shoulder straps, carry case, USB interface cable, versiv open source software CD, two AC chargers, two universal couplers, integrated Wi-Fi, Statement of calibration and getting started guide.Works on 1000MHz maximum frequency.Standard link interface adapters: shielded RJ45, Tera, GG45.Supported test parameters: wire map, length, propagation delay, delay skew, dc loop resistance, pair-to-pair resistance unbalance, pair resistance unbalance, insertion loss, return loss, common mode return loss, near end crosstalk, far end crosstalk, attenuation-to-crosstalk ratio, acr-f, power sum acr-f/next/acr-n/alien next/alien attenuation next ratio far end, common mode to differential mode next,transverse conversion loss, equal level transverse conversion transfer loss.5.7" LCD with a projected-capacitance touch screen allows for quick tester setup with easily selectable cable types, standards, and testing parameters.Versiv enables users to accomplish more than ever before with a cable tester, by accelerating every step of the testing process.LinkWare Live cloud service lets the project manager remotely set up the testers and monitor job progress and even location from any smart device.ProjX management system eases tasks from initial setup of a job to system acceptance, it eliminates redundant steps and ensures that all tests are completed correctly the first time, and every time.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.LinkWare PC management software provides unmatched analysis of test results and professional test reports.The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem.Integrated Wi-Fi allows you to easily upload results to LinkWare Live.Meets or exceeds ANSI/TIA-568.2-D, ISO/IEC standards

Multimode Fiber Verification Kit with Visifault - Includes Simplifiber Pro optical power meter, 850/1300 multimode source, Visifault VFL, FindFiber Remote ID source, Magnetic strap attachments, and carrying case; SC, ST, and LC power meter adapters also included.Multimode Fiber Verification Kit with Visifault.Networking Accessory.Part Number: FTK1200

Fluke Networks OptiFiber Pro designed for enterprise, datacenter, outside olant and PON fiber. As fiber networks evolve, the need to test in more locations has increased. OTDRs are now needed for: FTTx, enterprise, OSP, PON, POLAN. Many OTDRs designed for fiber troubleshooting are designed for carrier and contain cumbersome and complicated features. The OptiFiber Pro OTDR family is the first class of OTDRs that is built with features and usability for both the enterprise network engineers, and cable installers working in both enterprise and OSP environments. Fluke Networks OptiFiber Pro OTDRs make novices and experts faster. Advanced features include Manual Expert mode, pinch and zoom for in-depth trace analysis and SmartLoop for bi-directional testing. Supports Versiv copper and fiber loss certification modules..The optical time domain reflectometer (OTDR) for testing fiber networks.Mainframe with module dimensions: 11"H x 5.25"W x 2.63"D.Comes in black and yellow.Kit includes: versiv 2 mainframe, OptiFiber Pro Quad OTDR module, shoulder strap, carry case, USB interface cable, versiv open source software CD, AC charger, two quick clean cleaners, two SC/LC multimode launch cables, two SC/LC singlemode launch cables, two OTDR source port interchangeable LC adapters, USB fiber inspection video probe with four tips, SC/SC simplex adaptor, two launch fiber hanging straps and magnets, integrated Wi-Fi, Statement of calibration and getting started guides..Multiple wavelengths (850, 1300, 1310,1490, 1550, and 1625nm) support LAN, datacenters, PON, FTTx, and outside plant applications.Automated setup senses fiber characteristics and sets measurement parameters.SmartLoop OTDR enables automated testing and analysis of two fibers in a single test, eliminating the need to travel to the far end of the connection to perform tests.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.Compatible with Linkware Live and enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare PC cable test management software.Test times in 2 seconds in Quick Test mode.Quickly test datacenter fiber with preprogrammed settings.Troubleshoot datacenter fiber links with short patch cables and many connectors because of ultrashort dead zones.Easily characterize all connectors, splices, and areas of high loss with graphical EventMap view.Pass/Fail certification of fiber optic connector endfaces.ProjX management system increases return on investment by enabling OTDR.Reduce network downtime by quickly and precisely identifying faults on all fiber types.Built-in Visual Fault Locator (VFL) easily identifies damaged fibers.Meets or exceeds ISO/TIA standards.Integrated Wi-Fi allows you to easily upload results to LinkWare Live

The Wireview 2-6 is a cable identifier kit for Fluke Networks products.Cable testing and office identification accessory.Size: #2-6.Used for NTS2, ES, ES2 and OPV INA

The Fluke Networks® SimpliFiber® FTK1000 multimode fiber verification kit in yellow, includes pro optical power meter, 850/1300 multimode source, carrying case and SC power-meter adapter. The single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record. The CheckActive™ feature emits an audible tone and displays an icon when it detects a live fiber and the FindFiber™ remote id enables one individual to identify cable connections or routings especially useful at patch panels..Basic multimode fiber verification kit.Dimensions: 5.6"H x 3.2"W x 1.6"D.Comes in yellow color.Dual wavelength testing and tests multimode and singlemode fiber.Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter.Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source calibrated wavelengths in the power meter at 1490 nm and 1625 nm.Offers quick remote identification of cabling runs with find fiber remote IDs.Conduct pre testing and qualify cabling runs.Single port testing for simple network connection.Ruggedly built for demanding field use.Auto senses source wavelength.Operating temperature: 14 deg F to 122 deg F (-10 deg C to 50 deg C).Weight: 1.8 oz.