High-Gain WiFi Access Point

Tenda AC1200 i24 is a gigabit dual-band ceiling access point that is compliant with IEEE 802.11ac Wave 2 and offers a concurrent data rate up to 1167Mbps. Powered by MU-MIMO technology, letting you enjoy a better experience. And the built-in omnidirectional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You can use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Gigabit dual-band ceiling access point provides satisfying wireless Internet connection for desktop computers, notebooks, and other devices.Up to 1317Mbps dual-band data rate and 1000Mbps Ethernet port let you enjoy ultrafast Internet connections.Contains Ethernet and DC power ports.Dimensions: 7.01"H x 7.01"W x 1.5"D.Maximum power consumption: full-load 13.5W.Allows clients that support either 2.4GHz or 5GHz band, or both, to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.Meets or exceeds CE, FCC, and RoHS standards.Wireless security: WEP, WPA2-PSK, WPA-PSK, WPA2, WPA.Optimized antennas make it outstanding in radiating wireless signals and broadening wireless coverage.Featuring air interface scheduling, it can evenly allocate air interface resources, thus improving your wireless network speed as a whole by preventing clients with low data rate from consuming too much network resources.It also allows you to customize the RSSI threshold value so that you can disconnect clients that do not reach the RSSI.Powered by multiple interference-mitigation technologies, it automatically chooses the best channel and adjusts the transmit power to a reasonable value, significantly optimizing wireless signals by mitigating co-channel interference and electromagnetic interference (EMI).You are allowed to set multiple SSIDs and enabled to add VLAN tags for SSIDs with the IEEE 802.11q VLAN-compliant feature so as to protect the security of your network.You can use an IEEE 802.3at-compliant PoE sourcing equipment or a DC power adapter to power on it.You are allowed to configure and manage multiple i24 in a centralized manner through all Tenda access controllers (AC) and enterprise routers that include AC functionality and enjoy simple management, configuration, and monitoring of all access points.Comes in white

Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With a maximum real-world aggregate data rate of 2.69 Gbps (HE80/HE20), they deliver the speed and reliability needed for any enterprise environment. The 510 Series APs are also designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), bi-directional multi-user MIMO and cellular optimization. With up to four spatial streams (4SS) and 160MHz channel bandwidth (VHT160), the 510 Series provides groundbreaking wireless capabilities for any enterprise..Access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements.Up to 1.2Gbps wireless data rate on 5GHz and up to 574Mbps on 2.4GHz.Interface: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps), USB 2.0.Dimensions: 1.8"H x 7.9"W x 7.9"D.DC power interface: 12V.Indoor, dual radio, 5GHz 802.11ax 4x4 MIMO and 2.4GHz 802.11ax 2x2 MIMO.Meets or exceeds UL2043 standard.WPA, WPA2 and WPA3 – Enterprise with CNSA option, Personal(SAE), Enhanced Open ( OWE).Lifetime manufacturer limited warranty

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

1+km transmission Range O1-5G adopts of internal power amplifier and 9dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 1km..Operating on the 5GHz band, the Tenda O1-5G KIT is ideal for PtP and P2MP applications like video surveillance, internet sharing, and long-range connectivity..Utilizing Wi-Fi 5 (802.11ac) with a maximum speed of 867 Mbps, it ensures fast and reliable wireless communication for data-intensive applications..Supports Power over Ethernet (PoE) and Wi-Fi 5, enabling simplified installation with power and data via a single Ethernet cable..It Offers robust outdoor connectivity with 11AC technology, 867Mbps speeds, and a 9dBi directional antenna for stable 1km connections..Included Components: 5GHz 9dBi 11AC 867Mbps Outdoor CPE, 1 x Power Adapter, 1 x PoE Injector, 1 x Quick Installation Guide.Supports 12V 1A Passive PoE and DC power options, offering flexible and easy installation in various environments..Operates on the 5GHz band, offering high-speed wireless connectivity with less interference than the 2.4GHz band..Features an IP65 waterproof enclosure for protection against dust and water..Certifications & Standards: FCC, CE, RoHS.Comes with 3 years limited warranty.

The AP 330 is WatchGuard's all-purpose Wi-Fi 6 access point and is the ideal choice for mid-density indoor environments of all sizes to utilize the most secure WPA3 encryption for a seamless experience. Includes 2x2 radio scanning optimized for Wi-Fi 6 with six internal antennas. Maximum TX power delivers 22 dBm and a 2dBi antenna gain with one Ethernet port supporting up to 2.5 Gbps. These Wi-Fi 6 access points deliver a maximum data rate for a seamless wireless experience by supporting up to 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..The WatchGuard AP330 operates on dual bands: the 2.4 GHz and 5 GHz frequencies. It is designed for medium-density indoor environments, such as offices, schools, and retail spaces, providing reliable and high-efficiency Wi-Fi 6 connectivity..It supports the Wi-Fi 6 (802.11ax), standard up to 1.2 Gbps on the 5 GHz band and 0.574 Gbps on the 2.4 GHz band..The WatchGuard AP330 supports PoE (Power over Ethernet) 54V DC 802.3at (PoE+).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 2.5 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components are Access point unit, mounting hardware, quick start guide..Power Source PoE 54V DC 802.3at..This device have Frequencies of 2.4 GHz and 5 GHz bands..Its has The Restriction of Hazardous Substances (RoHS) is a standard..The WatchGuard AP330 comes with a standard 1-year warranty

WatchGuard's AP 130 is an ideal Wi-Fi 6 solution to support low-density indoor environments like a small office or remote workers with a secure WPA3 encryption. Integrated security is delivered by supporting the 802.11 standard and WPA3 encryption to enhance the Wi-Fi experience. Includes Wi-Fi 6 2x2 radio with four internal antennas. Maximum TX power delivers 22 dBm and a 3dBi antenna gain with one Ethernet port supporting up to 1 Gbps. Maximum data rate includes a crystal clear and seamless wireless experience supporting 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..This Dual-Band (2.4 GHz and 5 GHz) Device is designed for low-density indoor environments such as small offices or for remote workers..The WatchGuard AP130 supports the Wi-Fi 6 (802.11ax) standard Here are the maximum data transfer rates 2.4 GHz Band Up to 574 Mbps (0.574 Gbps) 5 GHz Band: Up to 1200 Mbps (1.2 Gbps).The WatchGuard AP130 supports PoE (Power over Ethernet): 54V DC 802.3at (PoE+)12. WiFi Standard: Wi-Fi 6 (802.11ax).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 1 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components AP130 Access Point Unit, Ceiling Mount T-Rail Brackets, Wall Mount Screws and Spacers, Quick Start Guide.Power source of 54V DC 802.3at (PoE+).Device supports these Frequencies 2.4 GHz and 5 GHz bands..Complies with the Restriction of Hazardous Substances (RoHS) directive, ensuring the product is free from specific hazardous materials and environmentally friendly..The WatchGuard AP130 comes with a standard 1-year hardware warranty.

8f7977b0a5d2d27b46d3a9be5838fd24.High performance Dual Radio 802.11ax AP with OFDMA and Multi-User MIMO (MU-MIMO).Supports all mandatory and several optional 802.11ax features.Maximum data rates of 4.8Gbps in the 5GHz band and 575Mbps in the 2.4GHz band (for an aggregate peak data rate of 5.4Gbps).Mid-range 802.11ax 510 series APs ideal for high density environments, such as schools, retail branches, hotels and enterprise offices.Includes Bluetooth 5 and Zigbee radios for location and IoT use-case

8f7977b0a5d2d27b46d3a9be5838fd24.High performance Dual Radio 802.11ax AP with OFDMA and Multi-User MIMO (MU-MIMO).Supports all mandatory and several optional 802.11ax features.Maximum data rates of 4.8Gbps in the 5GHz band and 575Mbps in the 2.4GHz band (for an aggregate peak data rate of 5.4Gbps).Mid-range 802.11ax 510 series APs ideal for high density environments, such as schools, retail branches, hotels and enterprise offices.Includes Bluetooth 5 and Zigbee radios for location and IoT use-case

8f7977b0a5d2d27b46d3a9be5838fd24.High performance Dual Radio 802.11ax AP with OFDMA and Multi-User MIMO (MU-MIMO).Supports all mandatory and several optional 802.11ax features.Maximum data rates of 4.8Gbps in the 5GHz band and 575Mbps in the 2.4GHz band (for an aggregate peak data rate of 5.4Gbps).Mid-range 802.11ax 510 series APs ideal for high density environments, such as schools, retail branches, hotels and enterprise offices.Includes Bluetooth 5 and Zigbee radios for location and IoT use-case

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-577 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated directional antenna outdoor AP.Built in 90°H x 90°V directional antennas: 5 GHz (antennas 5.6dBi), 2.4 GHz (antennas 6.8dBi), BLE/Zigbee (Integrated omnidirectional antennas with peak gain of 8.4dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 5.6"H x 9.0"W x 8.7"D.Lifetime manufacturer limited warranty

i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Access point operates on two wireless bands . The dual-band capability allows for more flexible and efficient wireless connectivity, making it suitable for both home and small business environments..Supports the 802.11ac Wave 2 wireless standard. It offers a maximum data transfer rate of 1167 Mbps (1.167 Gbps).This access point supports Power over Ethernet (PoE). it adheres to the Wi-Fi 5 standard, ensuring high-speed and reliable wireless connectivity..Provides robust wireless connectivity with the following features: Dual-Band Support: Operates on both 2.4 GHz and 5 GHz bands for flexible and efficient connectivity..includes the following connector, port, and interface types: One 10/100/1000 Mbps Ethernet Port (PoE) RESET Button SYS LED Indicator.In the box : Tenda I24 Access Point Power Adapter (DC: 12V 1A) Ethernet Cable User Manual Quick Installation Guide.Can be powered using: Power over Ethernet (PoE) DC power adapter (DC: 12V 1A).Certified by : Restriction of Hazardous Substances (RoHS)..Comes with a 3 year limited warranty.

The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)

The multifunctional Aruba 203R Remote AP delivers secure and fast 802.11ac wireless and wired network access to corporate resources for branch and home offices.: Unique in the industry, the compact Aruba 203R remote AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. It supports up to 867Mbps in the 5GHz band or up to 400Mbps in the 2.4 GHz band when operating in single radio 2x2 mode. In dual radio 1x1 mode, the maximum data rates for the 203R AP are 433Mbps in the 5GHz band and 200Mbps in the 2.4GHz band. The 203R AP offers a variety of enterprise-class features, including role-based network access, policy-based forwarding, and Adaptive Radio Management (ARM), which gives remote workers the same high-quality Wi-Fi experience they get at corporate headquarters. When additional capacity is desired, this low-cost 203R AP can be quickly added to an existing Aruba WLAN to improve network performance. Managed by the Aruba Mobility Controller, the 203R AP supports centralized configuration, data encryption, policy enforcement and network services. It extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center. With an integrated Aruba Beacon, the 203R AP simplifies the remote management of a large scale network of battery-powered BLE Aruba Beacons and provides advanced location and indoor wayfinding, and proximity-based push notification capabilities. For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, APs can configure themselves when powered up, slashing the cost and time to deploy wireless in remote branches and home offices. UNIQUE BENEFITS: Deploy with or without controller: The 203R can be deployed in either controller-based (ArubaOS) or controllerless (InstantOS) deployment mode. New 802.11ac flexible radio architecture: The 203R AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 clients) or up to 400Mbps in the 2.4 GHz band (with 2SS/VHT40 clients). In 1x1 dual radio mode, these max speeds are up to 433Mbps (5GHz) and 200Mbps (2.4GHz). Built-in Bluetooth Low-Energy (BLE) radio : Delivers location-based services for BLE-enabled mobile devices. Enables management of your deployment of battery-powered Aruba Beacons. Advanced Cellular Coexistence (ACC) : Minimizes the impact from out-of-band interference from sources such as 3G/4G cellular networks..When connected to a compatible router or a network switch, this wireless access point lets you enjoy wireless internet connectivity throughout your home or office.Ensure speedy data transfer of up to 867 Mbit/s with the IEEE 802.11ac wireless technology.Gigabit Ethernet port for ultra-fast wired network speeds.Its management capability provides efficient control over setup and configuration of your network

The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band

The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps

The UniFi nanoHD AP has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi Network mobile app (iOS or Android), the UniFi Network Application is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance..Dual-band access point for over 200 clients.Supports ac wireless standard with 6.5Mbps to 1.7Gbps and 58Mbps to 1.7Gbps data transfer rates.Powered using PoE+ and supports Wi-Fi 6E standard.Contains 1 x 1GbE RJ45 port.Includes: mounting plate, ceiling backing plate, and hardware kit.Works on 2.4/5GHz frequencies.Meets or exceeds the CE, FCC, IC, and cULus standards.Covers up to 1500 sq. ft..Supported voltage range: 44-57VDC.Maximum power consumption: 10.5W.Can be wall- or ceiling-mounted.PoE power adapter included.1 Year Warranty.Omni-directional 802.11ac Wave 2 Wi-Fi Access Point with 4x4 MU-MIMO technology. The price / performance leader in enterprise Wi-Fi.