Outdoor Wireless Access Points

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-577 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated directional antenna outdoor AP.Built in 90°H x 90°V directional antennas: 5 GHz (antennas 5.6dBi), 2.4 GHz (antennas 6.8dBi), BLE/Zigbee (Integrated omnidirectional antennas with peak gain of 8.4dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 5.6"H x 9.0"W x 8.7"D.Lifetime manufacturer limited warranty

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-575 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated omni-antenna outdoor AP.Built in omni directional antennas: 5 GHz (antennas 5dBi), 2.4GHz (antennas 3.4dBi), BLE/Zigbee (integrated omnidirectional antenna and the peak gain of 6dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 10.6"H x 9.4"W x 9.4"D.Lifetime manufacturer limited warranty

Powerful and affordable 5 GHz sector access point. GPS synchronized units provide up to 450+ Mbps data throughput. Introducing the Ubiquiti airMAX LiteAP AC, the latest high-performance access point with disruptive pricing. Featuring an ultra-lightweight form factor, the Ubiquiti airMAX LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these models operates in the worldwide, license-free 5 GHz frequency range with high-performance speeds..Powerful access point that creates a wireless local area network.Dimensions: 14.21"H x 4.9"W x 2.81"D.Comes in white.Equipped with 10/100/1000 Ethernet port.Minimal fasteners simplify installation.Ball-joint mount provides adjustment flexibility for versatile mounting options.Features a lightweight antenna with an integrated radio in a sleek design.Delivers high throughput over its wired connection.Precise GPS frame synchronization enables colocated devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability.Integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Pole mounting kit included.Meets or exceeds FCC, IC, CE standards.2-year manufactuer limited warranty

The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band

1+km transmission Range O1-5G adopts of internal power amplifier and 9dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 1km..Operating on the 5GHz band, the Tenda O1-5G KIT is ideal for PtP and P2MP applications like video surveillance, internet sharing, and long-range connectivity..Utilizing Wi-Fi 5 (802.11ac) with a maximum speed of 867 Mbps, it ensures fast and reliable wireless communication for data-intensive applications..Supports Power over Ethernet (PoE) and Wi-Fi 5, enabling simplified installation with power and data via a single Ethernet cable..It Offers robust outdoor connectivity with 11AC technology, 867Mbps speeds, and a 9dBi directional antenna for stable 1km connections..Included Components: 5GHz 9dBi 11AC 867Mbps Outdoor CPE, 1 x Power Adapter, 1 x PoE Injector, 1 x Quick Installation Guide.Supports 12V 1A Passive PoE and DC power options, offering flexible and easy installation in various environments..Operates on the 5GHz band, offering high-speed wireless connectivity with less interference than the 2.4GHz band..Features an IP65 waterproof enclosure for protection against dust and water..Certifications & Standards: FCC, CE, RoHS.Comes with 3 years limited warranty.

The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps

Ubiquiti Networks designed airMAX AC radios for high performance and ease of installation. You have the freedom to deploy the Bullet AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations. The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go..Access Point is a fully integrated radio that delivers up to 300+ Mb/s real TCP/IP throughput.Dimensions: 7.48"H x 1.81"W x 1.81"D.Access point covers both 2.4GHz and 5GHz radio bands, covering a wide range of frequencies that work well for both short- and long-distance links.Meets or exceeds CE, FCC, and IC certifications.Networking interface: Gigabit Ethernet port; antenna connector: N-type connector.Throughput 160+ Mb/s at 2.4GHz, 300+ Mb/s at 5GHz.Maximum power consumption: 8W; output power: 22dBm.Power supply: 24VDC, 0.3A (minimum); power method: 24V passive PoE (pairs 4, 5+; 7, 8 return).ESD/EMP protection: +/- 24kV contact/air.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity 5% to 95% noncondensing.ETSI300-019-1.4 shock and vibration.1-year manufacturer limited warranty

The gigabit dual-band indoor/outdoor access point OAP1200 offers a concurrent data rate as high as 1167 Mbps. Equipped with 2 omni-directional high-gain antennas, OAP1200 provides a maximum coverage radius of 200 meters. OAP1200 can be installed either on the wall or around a pole. OAP1200 can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors. With the IP65 enclosure, OAP1200 is designed for wireless coverage in factories, warehouses and other harsh outdoor environments..Tenda OAP1200 Outdoor Gigabit Wi-Fi Access Point is a dual-band device that provides high-speed internet connectivity for outdoor areas.Supports the 802.11ac wireless standard, offering a data transfer rate of up to 1167 Mbps on the 5 GHz band..Offers wireless connectivity through the 802.11ac wireless standard.Powered by MU-MIMO technology, a single OAP1200 can communicate with multiple wireless clients at the same time.OAP1200 allows clients that support either 2.4 GHz or 5 GHz band, or both, to connect to it at the same time.Achieve a concurrent data rate of 1167 Mbps, enabling seamless connectivity for multiple devices.With 2 omni-directional high-gain antennas, enjoy a maximum coverage radius of 200 meters, ensuring robust wireless signals across long distances..Mount the OAP1200 on walls or poles for versatile deployment options tailored to your environment.

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..Access point is purpose-built to survive in the harshest outdoor environments.Four spatial stream Multi User (MU) MIMO for up to 4.8 Gbps wireless data rate to up to four 1SS or two 2SS HE160 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (max).Features HPE SmartRate port (RJ-45), 100/1000BASE-T (RJ-45) and USB-C console interface.Dimensions: 10.6"H x 9.4"W x 9.4"D.POE powered (dual ports): 32.0W.Built in omni directional antennas: 5 GHz 5dBi, 2.4GHz 3.4dBi.Meets or exceeds CB Scheme Safety, cTUVus and UL2043 standards.Lifetime manufacturer limited warranty

Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point is ideal for point-to-multipoint applications and requires CPE devices with a sleek form factor. Bridge has a panel antenna with dual-polarity and requires no tools for assembly..Wireless data transfer rate: 150 Mbps.Frequency: 2.41 - 2.46 GHz ISM.Dimensions: 11.6"(H) x 3.1"(W) x 1.2"(D).Interfaces/ports: Ethernet port, fast ethernet port, 2 x network (RJ-45), PoE (RJ-45) port.Antenna gain: 11 dBi, outdoor antenna range - 9.3 mile, wireless LAN standard - IEEE 802.11n, ISM band.Management: Web based management, airControl.Power supply: PoE.Form factor: Pole mountable.Processor: Atheros MIPS 24KC, 400 MHz.Operating temperature: -30 - 75 deg C, Operating humidity: 5 - 95% condensing.Memory: 32MB SDRAM, 8MB Flash.Features: MIMO technology, quality of service, LED indicator.With software-enabled PoE output, the secondary ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.Polarization: Dual linear.Includes pole mounting kit.Certifications and standards: ETSI300-019-1.4, FCC Part 15.247, IC RS210, CE, IEEE standards - 802.11 b/g/n/802.3af.Weight: 14.11 oz..Warranty: 1 year limited.Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point has CPE design that expanded the global wireless ISP industry and offers transfer rate up to 150 Mbps.

Elevate your outdoor connectivity with the Grandstream GWN7660ELR, a high-performance AX3000 Wi-Fi 6 access point designed for enterprise-grade reliability. Engineered with IP67-rated weatherproof casing and heat-resistant technology, it thrives in harsh environments while delivering seamless coverage up to 300 meters. Featuring dual-band 2×2:2 MIMO with OFDMA and advanced antenna design, it supports up to 256 concurrent clients with blazing-fast 3Gbps aggregate wireless throughput. Integrated PoE/PoE+ support and a 2.5Gbps SFP port ensure flexible deployment, while the embedded controller and compatibility with GWN.Cloud and GWN Manager simplify network management. Ideal for warehouses, schools, hospitals, and multi-floor offices, this access point combines rugged durability with cutting-edge performance..Dual-band outdoor use with enterprise-grade access point functionality..AX wireless standard and up to 3000Mbps (3Gbps) data transfer rate..802.11 a/b/g/n/ac/ax wireless connectivity standards..1G RJ45 and 2.5G SFP ports plus a reset button interface..Mounting kits and a quick installation guide for easy setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz frequency bands for broad coverage..Meets FCC, CE, RCM, IC certifications and IP67 weatherproof standards..1-year manufacturer warranty.

The Juniper AP64 High Performance Multi Gigabit Outdoor Wireless Access Point ensures business continuity and operational efficiency in harsh environments. This high-performance, ruggedized and weather-resistant outdoor Wi-Fi 6E access point integrates AI for AX capabilities to automate network operation and boost Wi-Fi performance while providing real-time network insights..Designed for tri-band operation across 2.4 GHz, 5 GHz, and 6 GHz frequencies, suitable for both indoor and outdoor enterprise deployments..Supports Wi-Fi 6E (802.11ax) with a peak data transfer rate of 3600 Mbps (3.60 Gbps)..Includes Power over Ethernet (PoE) capability and complies with the Wi-Fi 6E standard..Provides wireless connectivity through Wi-Fi 6E and Bluetooth Low Energy (BLE) 5.3..Features a single 2.5 Gigabit Ethernet RJ-45 port for high-speed network access..Comes equipped with internal antennas, GPS/GNSS receiver, temperature sensor, and accelerometer..Operates using PoE as its primary power source, simplifying installation..Utilizes 2.4 GHz, 5 GHz, and 6 GHz bands to deliver optimal wireless performance..Complies with IEEE 802.11 a/b/g/n/ac/ax standards and integrates WIDS/WIPS for enhanced security..Limited 1-Year Manufacturer Warranty

The Grandstream GWN7664ELR is a high-performance AX6000 Wi-Fi 6 access point built for outdoor enterprise deployments. With dual-band 4×4:4 MU-MIMO and OFDMA technology, it delivers up to 6Gbps wireless throughput and supports 512 concurrent clients. Its IP67-rated weatherproof casing and 300-meter coverage range make it ideal for large outdoor spaces. Featuring embedded controller management, PoE+ support, and dual 2.5G ports, this AP ensures seamless connectivity and advanced QoS for real-time applications..Dual-band outdoor use with long-range access point coverage..AX6000 standard and 6000Mbps (6Gbps) wireless data transfer rate..PoE+ and integrates Wi-Fi 6 for high-efficiency performance..802.11 b/g/n/ac/ax wireless connectivity protocols..2.5G RJ45, 2.5G SFP, and reset button interfaces..Mounting kits and a quick installation guide for setup..Ethernet using 802.3at PoE standard with auto adaptation..2.4GHz and 5GHz bands for extended outdoor coverage..Certified under FCC, CE, RCM, IC and built to IP67 weatherproof grade..1-year manufacturer warranty.

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

Extend your high-speed wireless coverage to the outdoors with the high-powered ENH1350EXT, a Wave 2 Outdoor 11ac, 2x2, MU-MIMO, Dual-Band Wireless AC1300 Access Point. Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band, this feature-rich AP leverages advanced Wi-Fi and Beamforming antenna technology, maximizing performance and reliability while greatly increasing outdoor network user capacities. The AP is designed to operate in harsh environmental conditions and includes an IP67-rated waterproof and dustproof casing to protect it from the elements. 11ac Wave 2 Wireless Speeds to 867Mbps on 5GHz; to 400Mbps on 2.4GHz. IP67-Rated Weatherproof & Dustproof Housing Withstands Harsh Environments. Dual-Radio MU-MIMO Improves Performance & Expands User Capacities. Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients. Four (4) Detachable 5dbi High-Gain, 360 deg. SMA-Type Antennas..Environmentally Friendly: Yes.Environmental Certification: WEEE, RoHS, China RoHS, EU RoHS.Limited Warranty: 1 Year

The Wi-Fi 6 (802.11ax) AP63 Series access points driven by Mist AI offer high performance Wi-Fi to ensure enterprise business continuity and operation efficiency in outdoor environments. The ruggedized and weather resistant access points can be deployed in extremely harsh environments to meet expected SLE and deliver unprecedented user experience. The AP63 Series integrates the Juniper patented AI for AX capabilities and dynamic Virtual Bluetooth LE (vBLE) antenna array to automate network operation and boost Wi-Fi performance, while providing real-time network insights and location services. Managed by the Juniper Mist Cloud Architecture, the outdoor AP63 Series is ideal for retail curbside, enterprise campus, public venue, outdoor station, and industrial site environments. Juniper brings true innovation to the wireless space with the world’s first AI-driven Wireless LAN (WLAN). The Juniper AI-Driven Network makes Wi-Fi predictable, reliable and measurable with unprecedented visibility into the user experience through customizable Service Level Expectation (SLE) metrics. Time consuming manual IT tasks are replaced with AI-driven proactive automation and self-healing, lowering Wi-Fi operational costs and saving substantial time and money. All operations are managed via the open and programmable microservices with Juniper Mist Cloud Architecture. This delivers maximum scalability and performance while also bringing DevOps agility to wireless networking and location services..This access point supports dual-band operation on 2.4GHz and 5GHz frequencies, designed for outdoor environments such as enterprise campuses, public venues, and industrial sites..It uses the latest IEEE 802.11ax (Wi-Fi 6) standard and delivers a maximum data transfer rate of up to 3548 Mbps for high-performance connectivity.The device is powered via Power over Ethernet (PoE) and complies with Wi-Fi 6 technology for improved speed, efficiency, and capacity.It offers seamless wireless connectivity with integrated Bluetooth® LE and Mist AI-driven automation for optimized network performance.The access point includes a 1x Gigabit Ethernet port for wired uplink and PoE power delivery.Package includes the Juniper Mist AP63E-US access point unit and mounting hardware for easy installation.Comes with a one-year limited warranty from Juniper Networks for hardware reliability and support

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

The hardened, Aruba 518 series access point delivers high Wi-Fi 6 performance in harsh, weather-protected environments such as warehouses, industrial freezers or enclosures in extreme environments such as stadiums. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services. Purpose-built to survive in the harshest outdoor environments, 518 series APs withstand exposure to extreme high and low temperatures, persistent (non-precipitant) moisture, and are sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With maximum aggregate on air data rate of 3Gbps (HE80/HE40) the 518 series delivers the speed and reliability needed for any environment..Hardened access point delivers high-performance Wi-Fi 6 in harsh, weather-protected environments such as warehouses, industrial freezers, or enclosures in extreme environments such as stadiums.With the maximum aggregate on-air data rate of 3Gbps (HE80/HE40), this access point delivers the speed and reliability needed for any environment.AP can be configured to enable or disable capabilities based on available PoE+ power, perfect when wired switches have exhausted their power budget.Delivers 4x4:4SS MU-MIMO capability; Aruba's advanced ClientMatch and integrated Bluetooth enable Aruba location services.Features 1 x HPE SmartRate port (RJ45), 1 x 10/100/1000BASE-T (RJ45), 1 x USB Type-C console interface.Access point supports Power over Ethernet (PoE+), 802.3at compliant; worst-case access point power consumption: 25.6W (power sources sold separately).Dynamic frequency selection (DFS) maximizes the use of available RF spectrum.Meets or exceeds the FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, UL/IEC/EN 60950, EN 60601-1-1, EN60601-1-2 standards.Link aggregation (LACP) support between both network ports for redundancy and increased capacity.Software-configurable dual radios support 5GHz (Radio 0) and 2.4GHz (Radio 1).5GHz: four RP-SMA connectors for external antenna operation; 2.4GHz: two RP-SMA connectors for external antenna operation.Supported modulation types: 802.11b - BPSK, QPSK, CCK; 802.11a/g/n - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension); 802.11ac - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension); 802.11ax - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM.Supported radio technologies: 802.11b - direct-sequence spread spectrum (DSSS); 802.11a/g/n/ac - orthogonal frequency-division multiplexing (OFDM);­ 802.11ax - orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (RU).Each access point provides connectivity for a maximum of 512 associated clients per radio (1024 total) and up to 16 BSSIDs per radio.Aruba's patented AI-powered ClientMatch technology ensures that all clients are attached to their best serving access point; session metrics, network metrics, applications, and client type are used to identify and maintain best connection.Minimum operating system software versions: ArubaOS and Aruba InstantOS 8.7.0.0.Dimensions: 8.5"H x 8.5"W x 2.5"D.Regulatory domain: United States of America.Lifetime manufacturer limited warranty

Based on Ubiquiti’s LTU technology, the LTU LR is not impeded by the limitations of standard 802.11 Wi-Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps of real TCP/IP throughput and modulation rates of up to 4096QAM..The LTU LR supports both bridged and built-in hardware NAT router modes to suit your specific deployment..The LTU LR can use different frequencies for TX and RX to avoid interference.The LTU LR directs RF energy in a tighter beamwidth. With the focus in one direction, the LTU LR blocks or spatially filters out noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency..Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of a 26 dBi antenna, so there is no need for a cable. This improves performance because it eliminates cable losses..The LTU LR features a large reflector size and easy elevation adjustment (azimuth is adjusted by rotation around the pole)..Channel width flexibility allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Channel width options include the following:10 MHz 20 MHz 30 MHz 40 MHz 50 MHz Up to 100 MHz.By default, the Auto Output Power option allows the LTU LR to set the output power (EIRP) to the appropriate level..The LTU LR's TX output power is controlled by the AP's target TX output power. A PtMP network can manage signal levels to enhance network stability and achieve optimal wireless performance with the highest possible modulation..To manage the LTU LR, you have two options: the LTU Configuration Interface and Ubiquiti Network Management System (UNMS™). Either option lets you manually configure the LTU LR..Wireless Transmission Speed 600 Mbit/s.Form Factor Pole-mountable.Designed for long-range applications, the LTU LR is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Features Wi-Fi 6 standard with a combined peak data rate of up to 4.8Gbps.Include an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors.Features 1 x 1000Base-T - RJ-45, 1 x console - USB-C, 1 x HPE Smart Rate - RJ-45.AP supports Power over Ethernet (on ports E0 and/or E1).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM); 5.850 to 5.875 GHz (U-NII-4).TAA-compliant.Features include Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), Downlink Multi-User MIMO (MU-MIMO), and cellular co-location.The ACC feature uses built in filtering to automatically minimize the impact of interference of high power cellular base stations, in building distributed antenna systems as well as small cell and femtocell equipment.With the introduction of WPA3 and Enhanced Open, a Wi-Fi 6 certified client will never send unencrypted traffic over the air.AP provides connectivity for a maximum of 512 associated clients per radio (1024 in total).Available management choices include Aruba Central (cloud-based) or Aruba AirWave (multivendor, on premises) solutions.Withstands harsh outdoor weather conditions, providing fast speed, high density, and reliable connectivity outdoors in large open areas, such as stadiums and parking lots.Lifetime manufacturer limited warranty

Weatherproof and temperature hardened, Aruba 560 series access points deliver cost-effective Wi-Fi 6 wireless connectivity in outdoor and environmentally challenging locations. Purpose-built to survive in the harshest outdoor environments, 560 series can withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With maximum aggregate on air data rate of 1.49Gbps (HE80/HE20), they deliver the speed and reliability needed for most environments. The Aruba advanced ClientMatch technology and an integrated Bluetooth beacon can help enable Aruba location services..Weatherproof and temperature-hardened, this access point delivers cost-effective dual-band (2.4GHz, 5GHz) Wi-Fi 6 wireless connectivity in outdoor and environmentally challenging locations.With maximum aggregate on-air data rate of 1.49Gbps (HE80/HE20), the AP delivers the speed and reliability needed for most environments.AP can be configured to enable or disable capabilities based on available PoE power, perfect when wired switches have exhausted their power budget.Wi-Fi 6 access point provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements.Features 1 x Ethernet wired network port (RJ45) and 1 x USB Type-C console interface.Meets or exceeds the FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, UL/IEC/EN 60950, EN 60601-1-1, EN60601-1-2, TAA standards.Low-density parity check (LDPC) for high-efficiency error correction and increased throughput.Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.2.4GHz band maximum (conducted) transmit power (limited by local regulatory requirements): +23dBm per chain, +26dBm aggregate (2 x 2);­ 5GHz band: +23dBm per chain, +26dBm aggregate (2 x 2).­Supported modulation types: 802.11b: BPSK, QPSK, CCK; 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension); 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension); 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM.5GHz: two spatial stream single-user (SU) MIMO for up to 1.2Gbps wireless data rate with individual 2SS HE80 802.11ax client devices or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously; 2.4GHz: two spatial stream single-user (SU) MIMO for up to 574Mbps (287Mbps) wireless data rate with individual 2SSHE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously.Each AP provides connectivity for a maximum of 256 associated clients per radio (512 in total).Aruba advanced ClientMatch technology and an integrated Bluetooth beacon can help enable Aruba location services.Minimum operating system software versions: ArubaOS and Aruba InstantOS 8.8.0.0.Dimensions: 6.5"H x 6.5"W x 4.3"D.Regulatory domain: United States of America.Lifetime manufacturer limited warranty

Purpose-built to survive in the harshest outdoor environments, Aruba 580 Series outdoor access points are designed for the highest levels of performance and greater deployment flexibility – all backed by a limited lifetime warranty. Aruba 580 Series APs deliver the speed and reliability needed for large enterprise and Industrial IoT deployments with high-power Bluetooth and 802.15.4/Zigbee radios and flexible power options..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Flagship Wi-Fi 6 performance and speed with a maximum aggregate data rate of 2.97 Gbps and dual-band 4x4 radios.Flexible connectivity and power options with support for 5 Gbps SmartRate Ethernet ports or 10Gbps SFP+ ports and 802.3bt Class 6 power or AC power.Supports direct AC power and Power over Ethernet (POE; on port E0 only).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM).Features built in omni-directional antennas (H and V polarized); 5Ghz antennas 4.5dBi uncorrelated avg (5.8dBi peak); 2.4GHz antennas 3.0dBi uncorrelated avg (4.4dBi peak); Bluetooth antenna 4.8dBi peak.Support for 5Gbps NBase-T Ethernet, up to 10Gbps SFP+, and 1Gbps (w/PoE Out).High-power Bluetooth and Zigbee radio for IoT connectivity with support for maximum range and performance.Aruba Intelligent Power Monitoring (IPM) allows the AP to operate if there is not enough PoE power as well as manage heat to prevent overheating in the most extreme environments.State of the art security with WPA3 and Enhanced open.Great for large-scale outdoor environments including universities, large enterprises, and industrial applications.Built to survive the harshest environments, the IP66/67 rated access point survives high wind, extreme temperatures, and moisture.Lifetime manufacturer limited warranty

High-Performance airMAX ac Bridge Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is ideal for CPE deployments requiring maximum performance. Management Wi-Fi Radio The PowerBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam AC offers a more robust mount with a convenient lifting loop or handle. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses. Plug and Play Installation The PowerBeam AC requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the PowerBeam AC features the highest gain for its size. The PowerBeam AC's excellent beam directivity provides the best performance in high-noise environments. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management dadio: 2412-2462MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.Mounting bracket conveniently offers elevation adjustments (20-degree tilt).1 Year Warranty

Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless bridge is ideal for point-to-multipoint applications and requires CPE devices with a sleek form factor. Bridge has a panel antenna with dual-polarity performance and requires no tools for assembly..Wireless data transfer rate: 300 Mbps.Frequency: 2.41 - 2.46 GHz.Dimensions: 6.4"(H) x 3.1"(W) x 1.2"(D).Interfaces/ports: 1 x 10/100 ethernet port.Antenna gain: 8 dBi, outdoor antenna range: 49.2', memory: 32MB SDRAM, 8MB flash.Power: PoE source, consumption: 5.5 W, 24 V, 0.5 A, input voltage: 110 - 220 VAC.Enclosure: Outdoor UV stabilized plastic, form factor: Pole mountable.Processor: Atheros MIPS 24KC, 400 MHz.Operating temperature: -30 - 75 deg C, Operating humidity: 5 - 95% condensing.Features quality of service, MIMO technology.Low cost, high performance and small form factor of NanoStationM and NanoStationlocoM make them extremely versatile and economical to deploy.Wireless security: WEP, WPA, WPA2, management: airControl, web based management.Compatibility: IEEE 802.3af, IEEE 802.11b/g/n.Includes pole mounting kit.Certifications and standards: FCC Part 15.247, IC RS210, CE, RoHS.Weight: 6.35 oz..Warranty: 1 year limited.Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Indoor/Outdoor wireless bridge has CPE design that expanded the global wireless ISP industry and offers transfer rate up to 300 Mbps.

Weatherproof and temperature hardened, Aruba 560 series access points deliver cost-effective Wi-Fi 6 wireless connectivity in outdoor and environmentally challenging locations. Purpose-built to survive in the harshest outdoor environments, 560 series can withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With maximum aggregate on air data rate of 1.49Gbps (HE80/HE20), they deliver the speed and reliability needed for most environments. The Aruba advanced ClientMatch technology and an integrated Bluetooth beacon can help enable Aruba location services..Weatherproof and temperature-hardened, this wireless dual-band (2.4GHz, 5GHz) access point delivers cost-effective Wi-Fi 6 wireless connectivity in outdoor and environmentally challenging locations.With maximum aggregate on-air data rate of 1.49Gbps (HE80/HE20), the AP delivers the speed and reliability needed for most environments.AP can be configured to enable or disable capabilities based on available PoE power, perfect when wired switches have exhausted their power budget.Wi-Fi 6 access point provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements.Features 1 x Ethernet wired network port (RJ45) and 1 x USB Type-C console interface.Software-configurable dual radios support 5GHz (Radio 0) and 2.4GHz (Radio 1).Meets or exceeds FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, UL/IEC/EN 60950, EN 60601-1-1, EN60601-1-2 standards.Purpose-built to survive in the harshest outdoor environments, this access point can withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and is fully sealed to keep out airborne contaminants; all electrical interfaces include industrial-strength surge protection.With 802.11ax, MU-MIMO has been enhanced to support uplink traffic from the client to the AP and will support up to eight clients at a time.Aruba advanced ClientMatch technology and an integrated Bluetooth beacon can help enable Aruba location services.AP includes components of Aruba's Zero Trust Security to help protect user authentication and wireless traffic: WPA3 and Enhanced Open, WPA2-MPSK, VPN tunnels, Trusted Platform Module (TPM).5GHz: two spatial stream single-user (SU) MIMO for up to 1.2Gbps wireless data rate with individual 2SS HE80 802.11ax client devices or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously; 2.4GHz: two spatial stream single-user (SU) MIMO for up to 574Mbps (287Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously.Each AP provides connectivity for a maximum of 256 associated clients per radio (512 in total).Aruba's patented AI-powered ClientMatch technology eliminates sticky client issues by placing Wi-Fi 6 capable devices on the best available AP.Minimum operating system software versions: ArubaOS and Aruba InstantOS 8.8.0.0.Dimensions: 6.5"H x 6.5"W x 4.3"D.Regulatory domain: United States of America.Lifetime manufacturer limited warranty

The Cisco Catalyst 9124AX Series outdoor access points are next-generation Wi-Fi 6 access points encased in a rugged and robust design that service providers and enterprises can easily deploy. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. An increasing number of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. The Cisco Catalyst 9124AX Series outdoor access points provide a seamless experience, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the Catalyst 9124AX Series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. The Catalyst 9124AX Series offers flexible deployment options for service providers and enterprise networks that need the fastest links possible for mobile, outdoor clients (smartphones, tablets, and laptops), and wireless backhaul. With options for internal or external antennas, the 9124AX Series gives network operators the flexibility to balance their desired wireless coverage with their need for easy deployment. The Catalyst 9124AX Series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) outdoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a one 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3bt), and one Gigabit Ethernet SFP ports.Power over Ethernet (PoE): 802.3bt or DC power.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MU-MIMO).Meets or exceeds the IP66/IP67 IEC 60529 Ingress Rating, MIL-STD-810F, NEMA 250-2008, EN 60068-2-5, MIL-STD-810E, Method 514.4 standards.One status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty

Classic NanoStation design with updated proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP station (CPE)..Compact, UISP-ready WiFi radio sporting a classic NanoStation design and an updated airMAX AC chipset.More than 450Mbps real TCP/IP throughput.2 x 10/100/1000 Mbps Ethernet ports.Dimensions: 7.05" x 3.05"W x 2.33"D.Surge protection should be used for all outdoor installations.Supported voltage range: 24V ±10%.5GHz operating frequency.Meets or exceeds CE, FCC, IC standards.2 years manufacturer limited warranty