LC Fiber Cables
134 results
Fiber optic LC Male/LC Male.Ultimate solution for high-speed, long distance, data transmissions.3.3'
StarTech FIBLCLC3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC to LC.Can maximize wiring conduit usage while minimizing installation problems.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Cool/no heat so it doesn't destroy heat-sensitive papers.No warm-up or waiting, no odors.portable and compact for desktop operation, weighs only 8 1/2 lbs..Easy-to-use for goof-proof operation.Refills quickly with Scotch® refill cartridges.18-foot dual-laminate starter cartridge included.White.Max pouch thickness: Up to 9.2 mil.Throat width: 8 1/2".Laminating style: Cold.Perfect lamination without electricity.Safe, heat-free and easy to use, with no warm-up waiting time, no fumes and no mess.Ideal for posters, banners, artwork, signs, menus, maps and more.Fully compatible with inkjet, thermal and other sensitive papers.For documents up to 8 1/2" wide, 1/10" thick and 90-ft.long.Features easy-loading cartridge, adjustable input tray
Fiber optic patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex singlemode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket.Applications: Networking equipment that requires single mode fiber optic patch cabling.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 9 microns core, 125 microns clad.Fiber type: Glass.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes duplex fiber optic patch cable, 10' duplex singlemode fiber patch LC/SC cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited
This 2m LC/SC Duplex 50/125 Multimode Fiber Patch Cable provides a reliable connection between networking devices for high-speed long distance networks; tested/certified to be within acceptable optical insertion loss limits. Lifetime Warranty..Can maximize wiring conduit usage while minimizing installation problems.Fiber Optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high-speed data transmission.Backed by StarTech.com lifetime warranty.Connectors offer greater durability in resisting pulls, strains, and impacts during cable installation and maintentance.Immune to electricty interference.Attenuation loss meets or exceeds industry standards
StarTech FIBLCST3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC-ST.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Attenuation loss meets or exceeds industry standards.Backed by StarTech.com lifetime warranty.Attenuation loss meets or exceeds industry standards
Provide a high-performance link between fiber network devices - Duplex Fiber Cable / LC to ST / Multimode Patch Cable - 1m Multimode 62.5/125 Duplex Fiber Patch Cable LC to ST - Ideal solution for data applications requiring high speed data transmission - Guaranteed reliability with a lifetime warranty.Fiber Optic cables are an ultimate solution for high- speed data transmission.Fiber optic cables provide a higher quality signal over a greater distance.Backed by StarTech.com lifetime warranty.Attenuation loss meets or exceeds industry standards
Includes 10' duplex MMF cable LC/LC 62.5/125 fiber cable..Orange.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode Duplex cable with SC/LC connectors.Core/cladding diameter: 62.5/125 micron m.Fiber optic mode: Multimode.Network speed: 1 Gbps.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.color-coded shrouds identify transmit and receive.Compliant and standards: FDDI and OFNR.Warranty: Lifetime limited
Aqua.Fiber optic LC Male/LC Male.Designed for use in 10-gigabit Ethernet applications
StarTech Multimode 62.5/125 Duplex Fiber Patch Cable LC LC Network Cable 3.3 Ft Orange.Type: Network cable.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Riser.Length: 3.3 ft.Core / Cladding Diameter: 62.5 / 125 micron.Connectors: 2 x LC multi-mode, male.Connectors (Other Side): 2 x LC multi-mode, male.Color: Orange.Manufacturer Warranty: Limited lifetime warranty.Multimode duplex fiber optic network cable provide connection between fiber networking devices for high-speed, long distance networks.
The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 100gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM4 Patch Cables are available in various lengths starting from 0.5m to 20m length..Ideal for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering exceptional performance for demanding applications.Compact 1.64ft length for short-distance connections, reducing clutter while maintaining superior signal integrity.Features LC to LC connectors for secure, precise, and low-loss optical signal transmission.Made with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, protected by a durable LSZH jacket and finished in turquoise for easy identification..Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for mission-critical tasks.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking in data centers, enterprise setups, and telecom environments, this cable ensures seamless connectivity between devices requiring LC-to-LC fiber optic connections.Offers a convenient 1.64 feet (0.5 meters) length for short-distance, clutter-free installations.Equipped with LC male connectors on both ends, delivering secure and precise fiber optic connections.Constructed with 50/125 µm OM3 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in a blue color for easy identification.Supports 10 Gbps data transfer speeds, ensuring reliable performance for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.2-year manufacturer warranty
The ALOGIC network cable is designed to meet the needs of modern, high-speed networking environments. This cable features a halogen-free construction, making it a safer option by reducing the emission of toxic and corrosive gases in case of fire. With a core and cladding diameter of 50 / 125 micron, it is optimized for efficient data transmission, ensuring high-quality connectivity through its LC multi-mode connectors. The duplex configuration of the cable supports bidirectional data transfer, enhancing the efficiency of network systems. Additionally, the cable's compliance with OM4 standards ensures its performance over extended distances, making it an ideal choice for a wide range of applications. Its jacket, made from Low Smoke Zero Halogen material, not only contributes to safety but also offers durability, ensuring long-term reliability. Whether for residential or commercial use, the ALOGIC network cable is engineered to provide a high-performance, safe, and reliable networking solution..Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering reliable performance for critical applications.Compact 3.28ft (1m) length offers flexibility for short-distance connections while keeping your setup neat and organized.LC to LC connectors ensure secure, precise, and low-loss optical signal transmission for uninterrupted connectivity.Made with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable PVC jacket and a turquoise finish for easy identification.Supports high-bandwidth applications including 40G/100G Ethernet, making it ideal for next-generation networking.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Meets ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-tier quality and compliance.2 Years Manufacturer's Warranty
Fiber optic patch cable..Yellow.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Networking equipment that requires single mode fiber optic patch cables
The cable features a Low Smoke Zero Halogen (LSZH) jacket, ensuring safer usage in environments where smoke and toxic emissions are a concern. Equipped with dual LC multi-mode connectors, this cable offers compatibility with various devices, enhancing overall network performance. With a core/cladding diameter of 50/125 microns, this patch cable supports high bandwidth applications, making it suitable for demanding network environments. This product adheres to C-ETL and ETL standards, ensuring it meets rigorous safety and performance benchmarks for fiber optic cables. This cable operates in duplex mode, allowing for simultaneous transmission and reception of data, maximizing network efficiency..Designed for high-speed fiber optic connectivity in data centers, enterprise networks, and storage systems, ensuring reliable performance for mission-critical applications.Generous 6.6ft (2m) length provides flexibility for medium-distance connections without compromising signal quality.LC to LC connectors deliver secure, precise, and low-loss optical signal transmission for maximum efficiency.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for demanding workloads.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty
This is a 2m single-mode fiber (SMF) duplex SC/LC OS1 yellow patch cable. This high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits. The injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs. They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties..Yellow Duplex LC (Male) to SC (Male) cabling to provide reliable connectivity.2.0m (6.6ft) in length to fit the needs of your application.Complies with all multi-source agreement (MSA) standards to ensure seamless network integration.Application and environment tested and guaranteed to work.Limited Lifetime Warranty.2m LC (Male) to SC (Male) Yellow OS1 Duplex LSZH Single-Mode Fiber (SMF) Patch Cable
The Multi Mode OM1 cables are designed to support Gigabit Fibre & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fibre Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for short-distance fiber optic connections, this cable is ideal for linking LC and SC ports in data centers, enterprise networks, and telecom setups, ensuring dependable performance.Offers a practical 3.28 feet (1 meter) length for neat and space-saving installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 62.5/125 µm OM1 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for added safety, and finished in orange for easy identification.Supports up to 1 Gbps data transfer speeds, making it suitable for standard networking applications.Fully compatible with OM1 fiber optic systems for reliable connectivity.2-year manufacturer warranty
The Multi Mode OM1 cables are designed to support Gigabit Fiber & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fiber Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. SERVEREDGE 2m LCSC Multi Mode Duplex LSZH Fibre Cable is designed for high-speed data transmission in professional IT and telecommunications environments. With a core/cladding diameter of 62.5/125 microns and a Low Smoke Zero Halogen (LSZH) jacket, it minimizes toxic emissions during fire incidents. This cable is 100% optically tested, making it ideal for data centers, server rooms, and local area networks..Ideal for short-distance fiber optic connections, this cable is perfect for linking LC and SC ports in data centers, enterprise networks, and telecom setups, ensuring dependable and efficient performance.Provides a convenient 6.6 feet (2 meters) length for flexible and clutter-free installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 62.5/125 µm OM1 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for added safety, and finished in orange for easy identification.Supports up to 1Gbps data transfer speeds, making it suitable for standard networking applications.Fully compatible with OM1 fiber optic systems for reliable connectivity.2-year manufacturer warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 0.5m to 100m length.Designed for high-speed data transmission in fiber optic networks, ideal for connecting servers, switches, and storage devices in data centers or enterprise environments.The cable measures 6.6ft, providing flexibility for medium-distance connections without signal loss.Features LC to LC connectors with precision alignment for secure and reliable optical signal transfer.Constructed with OM3 multimode fiber for 10Gbps performance, LSZH jacket for durability, and finished in a turquoise color for easy identification.Supports high-bandwidth applications up to 10 Gigabit Ethernet, ensuring fast and efficient data transfer.Compatible with all OM3-rated fiber optic equipment, including transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling systems.2 Years Manufacturer's Warranty
The Multi Mode OM1 cables are designed to support Gigabit Fibre & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fibre Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..This fiber optic patch cable is designed for high-speed data applications such as Gigabit Ethernet, Fibre Channel, and ATM, making it ideal for network devices in commercial and industrial environments.The cable measures 16.4 feet (5 meters) in length, providing flexibility for medium-distance connections.It features LC male connectors on one end and SC male connectors on the other, supporting duplex multimode fiber connections for bidirectional data transfer.Constructed with genuine Corning Inficore glass fiber and ceramic ferrules for durability, the cable has a Low Smoke Zero Halogen (LSZH) jacket for safety and comes in a bright orange color for easy identification.Supports data transfer rates up to 1Gbps over OM1 multimode fiber, ensuring reliable performance for high-speed networks.Compatible with devices requiring LC to SC multimode fiber connections for Gigabit Ethernet and similar networking standards.2 Years Manufacturer's Warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 65.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Ideal for high-speed fiber optic connections in data centers and enterprise networks, ensuring seamless LC-to-LC interface integration.Compact 1.64ft length for clean, clutter-free installations in tight spaces.Features LC male connector on both ends for secure and precise connectivity.Built with OM3 multimode fiber for superior bandwidth, protected by a durable LSZH jacket, and finished in a vibrant turquoise color for easy identification.Supports up to 10Gbps high-speed data transfer, making it perfect for demanding networking and storage applications.Compatible with LC interface devices, fiber optic transceivers, and OM3-compliant networking hardware.2 Years Manufacturer's Warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 16.4'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 49.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking, this cable connects LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, delivering reliable and efficient performance.Offers a practical 3.28 feet (1 meter) length for clean and space-saving installations.Features LC male connectors on one end and SC male connectors on the other, ensuring secure and precise fiber optic connectivity.Built with 50/125 µm OM4 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 100Gbps data transfer speeds, delivering exceptional bandwidth for demanding network applications.Fully compatible with OM4 fiber optic systems and backward compatible with OM3 infrastructure for versatile deployment.2-year manufacturer warranty
Discover the ALOGIC fiber optic network cable, a solution designed for high-speed, reliable network connections. This duplex cable is engineered with a 50 / 125 micron core and cladding diameter, ensuring efficient data transmission and compliance with OM4 standards. The use of Low Smoke Zero Halogen (LSZH) material for the jacket makes it safer for the environment by reducing toxic emissions in case of fire and provides a durable construction for long-term use. Equipped with male LC multi-mode connectors on both ends, it offers easy and secure connections for a wide range of networking equipment. Whether you're setting up a new network or upgrading an existing one, the ALOGIC network cable is a smart choice for performance and safety..Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering exceptional performance for critical applications.Convenient 4.92ft length for short-distance connections, reducing clutter while maintaining superior signal integrity.LC to LC connectors ensure secure, precise, and low-loss optical signal transmission for maximum efficiency.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for demanding workloads.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty
The AddOn® ADD-LC-LC-5M5OM3 LC-to-LC male/male OM3 duplex fiber optic patch cable in aqua, is suitable for use with 10 Gb Ethernet applications. This cable measuring 5 m uses 850 nm vertical cavity surface emitting laser and it supports 2000 MHz/km effective modal bandwidth at 850nm. The laser optimized multi-mode fiber cable has low smoke zero halogen jacket, which provides protection from toxic and corrosive gases in badly ventilated spaces. This patch cable is backward compatible with existing 50/125 equipment, The cable is perfect for use with LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 5 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: LOMM.Core/cladding diameter: 50/125 um.Compatible with M7100 - 24X managed switch - (XSM7224-v1h1).Standard: OM3.It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with limited lifetime warranty.Aqua 5 m fiber optic patch cable with LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 0.5m to 100m length.Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, ensuring reliable performance for demanding applications.Offers a convenient 4.92ft length, ideal for short-distance connections without clutter or signal loss.Equipped with LC to LC connectors for secure, precise, and low-loss optical signal transmission.Built with OM3 multimode fiber for 10Gbps speed, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports ultra-fast data transfer up to 10Gigabit Ethernet, making it perfect for high-bandwidth applications.Works seamlessly with OM3-rated fiber optic equipment, including transceivers, patch panels, and network hardware.Meets ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-notch quality and compliance.2 Years Manufacturer's Warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 32.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
The Multi Mode OM1 cables are designed to support Gigabit Fiber & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fiber Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking, this fiber optic patch cable is designed for Gigabit Ethernet and Fibre Channel applications, ensuring reliable connectivity for servers, switches, and other network devices.The cable is 9.84ft (3m) long, offering the ideal balance between flexibility and convenience for short to medium-distance connections.Features LC male connectors on one end and SC male connectors on the other, providing a secure and efficient duplex multimode fiber link for fast data transfer.Built with Corning Infinicor OM1 glass fiber and ceramic ferrules for superior performance, the cable includes a Low Smoke Zero Halogen (LSZH) jacket for safety and comes in a vibrant orange color for easy identification.Supports data speeds up to 1Gbps over OM1 multimode fiber, delivering consistent and high-quality performance for demanding network environments.Works seamlessly with devices requiring LC to SC multimode fiber connections, including enterprise switches, routers, and storage systems.2-Years manufacturer’s warranty
The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking, this cable connects LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, ensuring reliable and efficient performance.Offers a practical 6.6 feet (2 meters) length for flexible and clutter-free installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Built with 50/125 µm OM4 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 100Gbps data transfer speeds, delivering exceptional bandwidth for demanding network applications.Fully compatible with OM4 fiber optic systems and backward compatible with OM3 infrastructure for versatile deployment.2-year manufacturer warranty
The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the cables are compliant to fiber type B1.3 in IEC 6 793-2-5-7 G652d capable of supporting up to 1 gigabit applications over very long distances..Engineered for high-speed networking, this single-mode fiber optic cable is ideal for connecting servers, switches, and enterprise-grade network equipment, ensuring fast and reliable data transmission over long distances.The cable measures 1.64ft (0.5m), making it perfect for short-distance connections with minimal clutter.Features LC male connectors on one end and SC male connectors on the other, providing a secure duplex single-mode fiber link for efficient data transfer.Constructed with 9/125 µm OS2 fiber for superior signal quality, the cable includes a Low Smoke Zero Halogen (LSZH) jacket for safety and durability, and comes in a bright yellow color for easy identification.Supports up to 1Gigabit applications, delivering exceptional performance for demanding single-mode network environments.Works seamlessly with devices requiring LC to SC single-mode fiber connections, including enterprise switches, routers, and storage systems.Compliant with OS2 specifications and IEC 60793-2-50 G652d standards, ensuring top-tier performance and safety.2 Years Manufacturer's Warranty
Compared to conventional twisted-pair copper cable, this LC-LC OM4 AddOn® 9.84' aqua fiber optic patch cable offers higher speeds and increased bandwidth. Multi-mode, LC/LC OM4 cable is suitable for use with 10GB Ethernet applications. The low smoke zero halogen jackets protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It is specifically designed for Ethernet, multimedia or communication applications. The patch cable provides backward compatibility with existing 50/125 um equipment..Laser optimized multi-mode fiber patch cable is specifically designed for Ethernet, multimedia, or communication applications.9.84' long for easy installation.Two LC male x two LC male connector provides the necessary connection between fiber networking devices.Designed for use with 10GB applications.Low smoke zero halogen jacket provides protection against toxic and corrosive gases in badly ventilated spaces and other most crucial areas.Meets RoHS, Green compliance and OM4 certified.Patch cable with fiber core/cladding diameter of 50/125 um has UPC termination to ensure secure connection.Laser optimized multimode fiber is built for speed and supports network device.Comes in aqua color.Duplex fiber optic cable offers simultaneous, bidirectional data transfer.Well suited for LANs or SANs and used for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Provides fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted pair copper cable.Comes with lifetime warranty.The AddOn® LC-LC OM4 9.84' aqua fiber optic patch cable offers fire protection needed to run within walls and air plenums terminating the need for conduits.
Discover the ALOGIC fiber optic network cable, a solution designed to meet the demands of modern networking environments. This duplex cable features halogen-free construction and is equipped with LC multi-mode connectors on both ends, ensuring a safe and reliable connection. With a core and cladding diameter of 50 / 125 micron, it supports efficient light transmission for high-speed data communication. The Low Smoke Zero Halogen (LSZH) jacket material not only enhances safety by reducing toxic and corrosive gas emissions but also complies with OM3 and ETL standards, making it a durable and compliant choice for your networking needs..Perfect for high-speed fiber optic connections in enterprise networks and data centers, ensuring reliable LC-to-LC interface integration.Convenient 3.28ft length for tidy, space-efficient installations.Equipped with LC male connectors on both ends for secure and precise connectivity.Constructed with OM3 multimode fiber for excellent bandwidth, featuring a durable LSZH jacket and a bright turquoise color for easy identification..Supports up to 10Gbps high-speed data transfer, making it ideal for modern networking and storage applications.Compatible with LC interface devices, fiber optic transceivers, and OM3-compliant networking hardware.2 Years Manufacturer's Warranty
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for high-speed networking, this cable is perfect for connecting devices in data centers, enterprise networks, and telecom setups, ensuring reliable LC-to-SC fiber optic connectivity.Offers a practical 4.92 feet (1.5 meters) length for clean and efficient installations.Features LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connections.Built with 50/125 µm OM3 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 10 Gbps data transfer speeds, ensuring superior performance for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.Backed by a 2-year manufacturer warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length: 3.3'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
Made from 50/125 zip cord fiber, the Tripp Lite Patch Cable features thoroughly tested dual LC connectors at each end which have minimum insertion loss. It is backwards compatible with 6.2 micron fiber and is equipped with built-in headroom for future applications. The cable is optimized for higher Gigabit and 10 Gbps networks with higher bandwidth capabilities. Beveled edges of the adapter are color coded for an easy and secure connection throughout your network..LCM/LCM fiber optic patch cable for efficient and high speed data transmission.Dual LC Male connectors for greater compatibility.Made from glass graded index fiber for minimum signal loss.OFNR rated PVC Jacket ensures durability.Compliance Standards: RoHS qualified.Comes with a limited lifetime warranty.The orange Tripp Lite 10' Duplex Fiber Optic LCM/LCM Patch Cable is optimized for high data transfer speeds of 1 Gbps making it a great choice for data centers and network applications.
AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color features low-smoke zero-halogen jacket that protects from toxic and corrosive gases. Cable is recommended for connection between fiber patch panels, hubs and switches..LC Male.Suited for shorter reach data center LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.15m.40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.Connector on first end: 2 x LC male network.Connector on second end: 2 x LC male network.Fiber optic: Fiber optic, cable characteristic: Patch cable, fiber optic mode: Multi-mode, core/cladding diameter: 50/125 micro meter, device supported: Network device.Aqua.Device supported: Network device.High-quality LOMM (50/125) patch cable is specifically designed for 40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.High bandwidth provided by OM4 fiber provides extra headroom for channel insertion loss.100% RoHS compliant for all of your networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.It is designed to enhance the system cost benefits enabled by 850 nm Vertical Cavity Surface Emitting Lasers for existing 1 and 10 Gb/s applications, as well as future 40 and 100 Gb/s systems. when used at less than rated distance environments.Warranty: Lifetime limited.AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color offers backward compatibility with existing 50/125 equipment and provides the fire protection needed to run within walls.
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for high-speed networking, this cable is perfect for connecting LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, ensuring reliable and efficient performance.Offers a convenient 3.28 feet (1 meter) length for neat and space-saving installations.Features LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 50/125 µm OM3 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 10 Gbps data transfer speeds, ensuring superior bandwidth for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.100% optically tested and provided with test reports.2-year manufacturer warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 6.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 100Gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, ensuring maximum performance for mission-critical applications.Generous 9.84ft (3m) length provides flexibility for longer runs while maintaining excellent signal integrity.LC to LC connectors deliver secure, precise, and low-loss optical signal transmission for reliable connectivity.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable PVC jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, making it ideal for next-generation networking.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-tier quality and reliability.2 Years Manufacturer's Warranty
Duplex patch cable..Aqua.Fiber optic LC male/LC male.Backward compatible with legacy LAN's.10'.Device supported: Network device.Applications: For use with 40/100 gigabit ethernet equipment.Jacket type: LSZH.Core/cladding diameter: 50/125 microm.Fiber optic mode: Laser-optimized multimode fiber (LOMMF).Network speed: 10 Gbps / 40 Gbps / 100 Gbps.40/100Gb ethernet speed to 300 meters at 850 nm.Includes 10' duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC.Compliant and standards: OM4 rated, TIA LOMMF and RoHS compliant.Warranty: Lifetime limited
Tripp Lite Duplex singlemode fiber patch cable has beveled edge on ends of glass that makes insertion of plug a breeze and color coded to identify transmit or receive. Cable has insertion loss testing performed on connector and provided with cable..Fiber optic.Beveled edge on ends of glass makes insertion of plug a breeze.3.28'.Yellow.Material: Polyvinyl chloride PVC jacket.Connections: 2 x LC male to 2 x LC male.Core/cladding diameter: 9/125 microm.Applications: Networking equipment that requires singlemode fiber optic patch cables.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/LC connectors.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Fiber made from glass.Color coded shrouds identify transmit and receive.Fiber optic distributed data interface (FDDI) rated.Includes 3' duplex singlemode fiber patch cable, LC/LC.Certifications and standards: FDDI, OFNR.Warranty: Lifetime limited.Tripp Lite Duplex singlemode 8.3/125 fiber patch cable measuring 3' is made of durable glass and provides twice bandwidth throughput of multimode.
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 1m to 25m length..Built for high-speed networking, this cable is ideal for connecting LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, ensuring reliable and efficient performance.Provides a convenient 6.6 feet (2 meters) length for flexible and tidy installations.Features LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 50/125 µm OM3 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 10 Gbps data transfer speeds, ensuring superior bandwidth for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.2-year manufacturer warranty
2 Ports.Unmanaged switch.Cable length: 3.28'.Connector on first end: 2 x LC male network.Form factor: desktop.Connector on second end: 2 x sc male network.Device supported: network device.Fiber optic mode: single-mode.Cable characteristic: patch cable
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 22.9'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty
StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 19.7'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty