SC LC Fiber Cables

This 2m LC/SC Duplex 50/125 Multimode Fiber Patch Cable provides a reliable connection between networking devices for high-speed long distance networks; tested/certified to be within acceptable optical insertion loss limits. Lifetime Warranty..Can maximize wiring conduit usage while minimizing installation problems.Fiber Optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high-speed data transmission.Backed by StarTech.com lifetime warranty.Connectors offer greater durability in resisting pulls, strains, and impacts during cable installation and maintentance.Immune to electricty interference.Attenuation loss meets or exceeds industry standards

Fiber optic patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex singlemode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket.Applications: Networking equipment that requires single mode fiber optic patch cabling.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 9 microns core, 125 microns clad.Fiber type: Glass.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes duplex fiber optic patch cable, 10' duplex singlemode fiber patch LC/SC cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

This is a 2m single-mode fiber (SMF) duplex SC/LC OS1 yellow patch cable. This high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits. The injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs. They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties..Yellow Duplex LC (Male) to SC (Male) cabling to provide reliable connectivity.2.0m (6.6ft) in length to fit the needs of your application.Complies with all multi-source agreement (MSA) standards to ensure seamless network integration.Application and environment tested and guaranteed to work.Limited Lifetime Warranty.2m LC (Male) to SC (Male) Yellow OS1 Duplex LSZH Single-Mode Fiber (SMF) Patch Cable

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable is for Use in 100 Gigabit Ethernet and fiber-channel applications.Cable Length ( ft.): 32.8 ft..This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the cables are compliant to fiber type B1.3 in IEC 6 793-2-5-7 G652d capable of supporting up to 1 gigabit applications over very long distances..Engineered for high-speed networking, this single-mode fiber optic cable is ideal for connecting servers, switches, and enterprise-grade network equipment, ensuring fast and reliable data transmission over long distances.The cable measures 1.64ft (0.5m), making it perfect for short-distance connections with minimal clutter.Features LC male connectors on one end and SC male connectors on the other, providing a secure duplex single-mode fiber link for efficient data transfer.Constructed with 9/125 µm OS2 fiber for superior signal quality, the cable includes a Low Smoke Zero Halogen (LSZH) jacket for safety and durability, and comes in a bright yellow color for easy identification.Supports up to 1Gigabit applications, delivering exceptional performance for demanding single-mode network environments.Works seamlessly with devices requiring LC to SC single-mode fiber connections, including enterprise switches, routers, and storage systems.Compliant with OS2 specifications and IEC 60793-2-50 G652d standards, ensuring top-tier performance and safety.2 Years Manufacturer's Warranty

The Multi Mode OM1 cables are designed to support Gigabit Fibre & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fibre Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for short-distance fiber optic connections, this cable is ideal for linking LC and SC ports in data centers, enterprise networks, and telecom setups, ensuring dependable performance.Offers a practical 3.28 feet (1 meter) length for neat and space-saving installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 62.5/125 µm OM1 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for added safety, and finished in orange for easy identification.Supports up to 1 Gbps data transfer speeds, making it suitable for standard networking applications.Fully compatible with OM1 fiber optic systems for reliable connectivity.2-year manufacturer warranty

The Multi Mode OM1 cables are designed to support Gigabit Fiber & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fiber Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. SERVEREDGE 2m LCSC Multi Mode Duplex LSZH Fibre Cable is designed for high-speed data transmission in professional IT and telecommunications environments. With a core/cladding diameter of 62.5/125 microns and a Low Smoke Zero Halogen (LSZH) jacket, it minimizes toxic emissions during fire incidents. This cable is 100% optically tested, making it ideal for data centers, server rooms, and local area networks..Ideal for short-distance fiber optic connections, this cable is perfect for linking LC and SC ports in data centers, enterprise networks, and telecom setups, ensuring dependable and efficient performance.Provides a convenient 6.6 feet (2 meters) length for flexible and clutter-free installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 62.5/125 µm OM1 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for added safety, and finished in orange for easy identification.Supports up to 1Gbps data transfer speeds, making it suitable for standard networking applications.Fully compatible with OM1 fiber optic systems for reliable connectivity.2-year manufacturer warranty

The Multi Mode OM1 cables are designed to support Gigabit Fibre & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fibre Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..This fiber optic patch cable is designed for high-speed data applications such as Gigabit Ethernet, Fibre Channel, and ATM, making it ideal for network devices in commercial and industrial environments.The cable measures 16.4 feet (5 meters) in length, providing flexibility for medium-distance connections.It features LC male connectors on one end and SC male connectors on the other, supporting duplex multimode fiber connections for bidirectional data transfer.Constructed with genuine Corning Inficore glass fiber and ceramic ferrules for durability, the cable has a Low Smoke Zero Halogen (LSZH) jacket for safety and comes in a bright orange color for easy identification.Supports data transfer rates up to 1Gbps over OM1 multimode fiber, ensuring reliable performance for high-speed networks.Compatible with devices requiring LC to SC multimode fiber connections for Gigabit Ethernet and similar networking standards.2 Years Manufacturer's Warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 49ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 49ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the cables are compliant to fiber type B1.3 in IEC 6 793-2-5-7 G652d capable of supporting up to 1 gigabit applications over very long distances..Designed for high-performance networking, this single-mode fiber optic cable is perfect for connecting servers, switches, and other network devices that require fast and reliable data transmission over long distances.The cable is 4.92ft (1.5m) long, making it ideal for short-distance connections without clutter.Equipped with LC male connectors on one end and SC male connectors on the other, this duplex cable ensures secure and efficient single-mode fiber connectivity.Built with 9/125 µm OS2 fiber for superior signal quality, the cable features a Low Smoke Zero Halogen (LSZH) jacket for safety and durability, and comes in a bright yellow color for easy identification.Supports data transfer speeds up to 1Gbps, delivering consistent performance for demanding single-mode network applications.Compatible with network devices that require LC to SC single-mode fiber connections, including enterprise-grade switches, routers, and storage systems.Compliant with OS2 specifications and IEC 60793-2-50 G652d standards, ensuring top-tier performance and safety.2 Years Manufacturer's Warranty

The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the cables are compliant to fiber type B1.3 in IEC 6 793-2-5-7 G652d capable of supporting up to 1 gigabit applications over very long distances..Engineered for high-performance networking, this single-mode fiber optic patch cable is perfect for connecting servers, switches, and storage systems in enterprise environments where speed and reliability matter.The cable is 3.28ft (1m) long, making it ideal for short-distance connections that require precision and minimal signal loss.Equipped with LC male connectors on one end and SC male connectors on the other, this duplex cable ensures secure and efficient data transmission for critical network setups.Constructed with 9/125 µm OS2 single-mode fiber and a Low Smoke Zero Halogen (LSZH) jacket for safety, the cable features a bright yellow color for easy identification in complex installations.Supports ultra-fast data transfer up to 1Gbps over long distances, delivering consistent performance for demanding network applications.Compatible with devices requiring LC to SC single-mode fiber connections, including enterprise-grade switches, routers, and telecom equipment.Complies with OS2 fiber specifications and IEC 60793-2-50 standards, ensuring top-tier safety and performance.2 Years Manufacturer's Warranty

The Multi Mode OM1 cables are designed to support Gigabit Fiber & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fiber Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking, this fiber optic patch cable is designed for Gigabit Ethernet and Fibre Channel applications, ensuring reliable connectivity for servers, switches, and other network devices.The cable is 9.84ft (3m) long, offering the ideal balance between flexibility and convenience for short to medium-distance connections.Features LC male connectors on one end and SC male connectors on the other, providing a secure and efficient duplex multimode fiber link for fast data transfer.Built with Corning Infinicor OM1 glass fiber and ceramic ferrules for superior performance, the cable includes a Low Smoke Zero Halogen (LSZH) jacket for safety and comes in a vibrant orange color for easy identification.Supports data speeds up to 1Gbps over OM1 multimode fiber, delivering consistent and high-quality performance for demanding network environments.Works seamlessly with devices requiring LC to SC multimode fiber connections, including enterprise switches, routers, and storage systems.2-Years manufacturer’s warranty

The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking, this cable connects LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, delivering reliable and efficient performance.Offers a practical 3.28 feet (1 meter) length for clean and space-saving installations.Features LC male connectors on one end and SC male connectors on the other, ensuring secure and precise fiber optic connectivity.Built with 50/125 µm OM4 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 100Gbps data transfer speeds, delivering exceptional bandwidth for demanding network applications.Fully compatible with OM4 fiber optic systems and backward compatible with OM3 infrastructure for versatile deployment.2-year manufacturer warranty

The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the cables are compliant to fiber type B1.3 in IEC 6 793-2-5-7 G652d capable of supporting up to 1 gigabit applications over very long distances..This premium single-mode fiber optic cable is designed for high-speed networking, making it perfect for connecting servers, switches, and enterprise-grade network equipment that demand reliable long-distance data transmission.The cable measures 6.6ft (2m), offering the ideal length for clean and efficient short-to-medium distance connections.Features LC male connectors on one end and SC male connectors on the other, ensuring a secure duplex single-mode fiber link for fast and stable data transfer.Constructed with 9/125 µm OS2 fiber for superior signal quality, the cable includes a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety and durability, and comes in a bright yellow color for easy identification.Supports up to 1Gbps data transfer rates, delivering exceptional performance for demanding single-mode network environments.Works seamlessly with devices requiring LC to SC single-mode fiber connections, including enterprise switches, routers, and storage systems.Compliant with OS2 specifications and IEC 60793-2-50 G652d standards, ensuring top-tier performance and safety.2 Years Manufacturer's Warranty

Connect fiber network devices for high-speed transfers with LSZH rated cable. The SMFIBLCSC1 1m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications. This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each Duplex 9/125 (OS1) Single-Mode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability, and is backed by our lifetime warranty..Guaranteed reliability.Suitable for installations under restrictive building codes, with LSZH rating.Cable Length: 3.28 ft

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 16.4ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 16.4ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 32.8ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for high-speed networking, this cable is perfect for connecting LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, ensuring reliable and efficient performance.Offers a convenient 3.28 feet (1 meter) length for neat and space-saving installations.Features LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 50/125 µm OM3 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 10 Gbps data transfer speeds, ensuring superior bandwidth for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.100% optically tested and provided with test reports.2-year manufacturer warranty

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for high-speed networking, this cable is perfect for connecting devices in data centers, enterprise networks, and telecom setups, ensuring reliable LC-to-SC fiber optic connectivity.Offers a practical 4.92 feet (1.5 meters) length for clean and efficient installations.Features LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connections.Built with 50/125 µm OM3 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 10 Gbps data transfer speeds, ensuring superior performance for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.Backed by a 2-year manufacturer warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.9.48 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.9.48 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty.This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking, this cable connects LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, ensuring reliable and efficient performance.Offers a practical 6.6 feet (2 meters) length for flexible and clutter-free installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Built with 50/125 µm OM4 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 100Gbps data transfer speeds, delivering exceptional bandwidth for demanding network applications.Fully compatible with OM4 fiber optic systems and backward compatible with OM3 infrastructure for versatile deployment.2-year manufacturer warranty

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 1m to 25m length..Built for high-speed networking, this cable is ideal for connecting LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, ensuring reliable and efficient performance.Provides a convenient 6.6 feet (2 meters) length for flexible and tidy installations.Features LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 50/125 µm OM3 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 10 Gbps data transfer speeds, ensuring superior bandwidth for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.2-year manufacturer warranty

The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for ultra-fast networking, this cable is perfect for connecting LC and SC fiber optic ports in data centers, enterprise networks, and telecom setups, ensuring reliable and efficient performance.Offers a generous 9.84 feet (3 meters) length for flexible installations without clutter.Features LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 50/125 µm OM4 multimode fiber, protected by a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in blue for easy identification.Supports 100Gbps data transfer speeds, ensuring superior bandwidth for demanding network applications.Fully compatible with OM4 fiber optic systems and backward compatible with OM3 infrastructure for versatile deployment.2-year manufacturer warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 3.28ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 3.28ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 65.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 22.9ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..This high-performance fiber optic cable is designed for fast and reliable network connectivity in data centers, enterprise networks, and telecom environments, making it ideal for connecting devices that require LC to SC fiber connections.The cable measures 9.84 feet (3 meters), providing flexibility for installations without excess slack.Features LC male connectors on one end and SC male connectors on the other, ensuring secure and precise connections for fiber optic networking.Built with 50/125 µm OM3 multimode fiber, a Low Smoke Zero Halogen (LSZH) jacket for safety, and finished in a blue color for easy identification.Supports 10 Gbps data transfer speeds, delivering high bandwidth for demanding network applications.Compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.Backed by a 2-year manufacturer warranty for peace of mind

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.6.56 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.6.56 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty.This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.82.02 ft. fiber optic cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..LC/SC-UPC OS2 Single Mode fiber cable is optimized for 10G networks and for high-speed, low-latency connections.164 ft. cable for long distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

The AddOn® 9.8' laser-optimized OM3 patch cable in aqua, has multi-mode fiber duplex two SC male connectors on first end and two LC male connectors on second end. With low smoke zero halogen jacket, this patch cable offers protection against toxic and corrosive gases in badly ventilated spaces. Featuring 50/125 OHMm core/cladding thickness, this patch cable ensures high performance. It is suitable for use with 10Gb Ethernet applications. The patch cable offers the fire protection needed to run within walls and air plenums, while eliminating the need for conduits..Patch cable for use with 10GB Ethernet applications and it is suited for LANs or SANs.Cable length: 9.8'.Multi-mode fiber (LOMM) duplex two SC male connectors on first end and two LC male connectors on second end.Jacket: Low smoke zero halogen (LSZH).Color: Aqua.Core/cladding: 50/125 OHMm, Standard: OM3.Jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with lifetime limited warranty

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.98.4 ft. for long distance application.This cable is Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty