Nitrile-Coated Work Gloves
161 results
7042 2XL Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
7041 2XL Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7042 S Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for harsh work environments. These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear. The DSX nitrile dip technology provides an unbeatable grip in dry environments. This special grip technology is abrasion-resistant and outperforms all nitrile-based dips in dry environments. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides Level 2 cut protection with dexterity and comfort. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers; come in high-visibility lime color.Size: L (9).12 pairs of gloves per pack.18-gauge yarn provides Level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable
7042 2XL Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7031 L Gray ANSI A3 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE
The Ergodyne ProFlex 7041 high-visibility nitrile-coated Level 4 cut-resistant gloves are designed with two types of technology to create comfortable, breathable, and excellent gripping. These knit work gloves are made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight and increase visibility with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface, making these firm-grip gloves stand out, especially in oily and wet conditions. The water-based polyurethane (PU) coating combined with nitrile dip allows for maximum dexterity and significantly relieves hand fatigue while ensuring durability..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: S (7).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable
7021 L Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
7001 S Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
7021 S Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
7041 XL Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: S (7).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide an excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for perfect dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI Level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a fit like no other. The DSX nitrile dip technology outperforms all nitrile-based dips in dry environments. This multi-layer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians. Great for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians; great for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend; come in black.Size: L (9).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touch-screen capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
7042 M Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7041 S Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: M (8).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable
7001 L Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
7000 XL Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7000 M Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7031 M Gray ANSI A3 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE
7000 2XL Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7021 M Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
7041 L Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
7000 L Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7031 2XL Gray ANSI A3 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE
7000 S Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7001 M Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
7000 M Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7000 XL Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7000 2XL Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: M (8).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
7000 L Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7041 M Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
Ansell HyFlex® Size group 10 medium nitrile gloves in black color have kevlar yarn lining for added durability. Gloves with a soft knit-wrist cuff offer enhanced grip in light oil conditions with good abrasion resistance..EN 388 3331, Cut level 3; ANSI Cut level 2.Size: X-Large (10).Color: Black.Material: Kevlar yarn lining.Cuff style: Knit-wrist.Coating: Foam nitrile.Resistance: Light cut.Applications: Carpentry, drywall, roofing, electrical wiring in residential and commercial structures, forming, machining and bending of small sharp parts, general maintenance, general material handling.Incorporates comfort flex cuff, giving the wearer a soft feel.Provides enhanced grip in light oil conditions with good abrasion resistance.Silicone-free and latex-free for worker and product protection.Industries: Aerospace, appliance manufacturing, automotive, electricians, general carpentry, general industry, glass, metal fabrication, metalworking.12 Pair.Size 10 black foam nitrile coated palm gloves provides enhanced grip in light oil conditions with good abrasion resistance.
Ansell HyFlex® Size group 9 light nitrile gloves in black color have kevlar yarn lining for added durability. Gloves with a soft knit-wrist cuff offer enhanced grip in light oil conditions with good abrasion resistance..EN 388 3331, Cut level 3; ANSI Cut level 2.Size: Large (9).Color: Black.Patented Nylon and Kevlar® zonal plaiting on palm and back.Cuff style: Knit-wrist.Coating: Foam nitrile.Resistance: Light cut.Applications: Carpentry, drywall, roofing, electrical wiring in residential and commercial structures, forming, machining and bending of small sharp parts, general maintenance, general material handling.Incorporates comfort flex cuff, giving the wearer a soft feel.Provides enhanced grip in light oil conditions with good abrasion resistance.Silicone-free and latex-free for worker and product protection.Industries: Aerospace, appliance manufacturing, automotive, electricians, general carpentry, general industry, glass, metal fabrication, metalworking.12 Pair.Size 9 black foam nitrile palm coated gloves silicone-free and latex-free for worker and product protection.
7000 S Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
Best Manufacturing Company Coated Work Gloves are disposable and powder-free. They are used for mechanical, machine assembly and construction applications..Coated work gloves.Disposable and powder-free.Ideal for mechanical, machine assembly and construction applications.Type & Material: Nitrile Gloves.Color: Blue.Size: Large.Cuff: Safety.Best Manufacturing Company Coated Work Gloves - Designed to protect hands against cuts and abrasion
Protect hands without sacrificing dexterity by using these breathable nitrile foam gloves, which offer increased wet and dry grip while keeping hands at a comfortable temperature. These MCR Safety Ninja gloves feature a unique shell and polymer construction to provide extra abrasion resistance..Breathable nitrile dipped gloves used in assembly, manufacture, farming, landscaping, and other applications.Features a 15-gauge nylon and spandex shell with a breathable nitrile foam (BNF) coating on the palm and fingertips, and multicolor design: gray shell with white hem supplemented by black polymer coat.Size: large.Knit wrist helps prevent dirt and debris from entering the glove.Nitrile foam-coated palm for extra wet or dry gripping power.Archived EN 388:CE result — 4141 (abrasion: 4, cut test: 1, tear: 4, puncture: 1), ANSI puncture level: 2, and ANSI abrasion level: 4.Each package contains dozen gloves.Breathability for lasting comfort and ergonomic design for minimum hand fatigue.Abrasion resistance, cut resistance, tear resistance, puncture resistance.Grip wet and dry surfaces firmly by using these MCR Safety Ninja breathable nitrile foam gloves.