Nitrile-Coated Work Gloves

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for tough environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides Level 3 cut protection with dexterity and comfort. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI Level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: 2XL (11).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: 2XL (11).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable

The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: XL (10).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: XL (10).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

The Ergodyne ProFlex 7041 high-visibility nitrile-coated Level 4 cut-resistant gloves are designed with two types of technology to create comfortable, breathable, and excellent gripping. These knit work gloves are made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight and increase visibility with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface, making these firm-grip gloves stand out, especially in oily and wet conditions. The water-based polyurethane (PU) coating combined with nitrile dip allows for maximum dexterity and significantly relieves hand fatigue while ensuring durability..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for harsh work environments. These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear. The DSX nitrile dip technology provides an unbeatable grip in dry environments. This special grip technology is abrasion-resistant and outperforms all nitrile-based dips in dry environments. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides Level 2 cut protection with dexterity and comfort. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers; come in high-visibility lime color.Size: L (9).12 pairs of gloves per pack.18-gauge yarn provides Level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: S (7).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: S (7).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable

The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide an excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for perfect dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI Level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a fit like no other. The DSX nitrile dip technology outperforms all nitrile-based dips in dry environments. This multi-layer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians. Great for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians; great for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend; come in black.Size: L (9).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touch-screen capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable

The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: M (8).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: M (8).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable

7073 1-pair XL Gray CR Gloves - Nitrile Coated A7 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP - Nitrile coated palms provide strong but flexible grip for secure handling with enhanced dexterity.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten carbide knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.BREATHABLE - Smooth nitrile layer allows airflow to pass through surface coating.TESTED - Meets EN388 4X42F and ANSI/ISEA 105-2016 level A7 cut resistant, level 6 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7073 1-pair 2XL Gray CR Gloves - Nitrile Coated A7 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP - Nitrile coated palms provide strong but flexible grip for secure handling with enhanced dexterity.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten carbide knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.BREATHABLE - Smooth nitrile layer allows airflow to pass through surface coating.TESTED - Meets EN388 4X42F and ANSI/ISEA 105-2016 level A7 cut resistant, level 6 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7073 1-pair L Gray CR Gloves - Nitrile Coated A7 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP - Nitrile coated palms provide strong but flexible grip for secure handling with enhanced dexterity.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten carbide knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.BREATHABLE - Smooth nitrile layer allows airflow to pass through surface coating.TESTED - Meets EN388 4X42F and ANSI/ISEA 105-2016 level A7 cut resistant, level 6 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7073 1-pair S Gray CR Gloves - Nitrile Coated A7 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP - Nitrile coated palms provide strong but flexible grip for secure handling with enhanced dexterity.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten carbide knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.BREATHABLE - Smooth nitrile layer allows airflow to pass through surface coating.TESTED - Meets EN388 4X42F and ANSI/ISEA 105-2016 level A7 cut resistant, level 6 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7251 1-pair 2XL Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: XL.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: XS.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: L.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: S.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves

7251 1-pair XL Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: XXL.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves

7073 1-pair M Gray CR Gloves - Nitrile Coated A7 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP - Nitrile coated palms provide strong but flexible grip for secure handling with enhanced dexterity.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten carbide knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.BREATHABLE - Smooth nitrile layer allows airflow to pass through surface coating.TESTED - Meets EN388 4X42F and ANSI/ISEA 105-2016 level A7 cut resistant, level 6 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7251 1-pair L Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: M.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves

7251 1-pair S Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7251 1-pair M Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of cut-resistant work gloves features an 18-gauge Hypermax shell coated with a thin layer of black nitrile on the palm and fingers. A reinforced thumb crotch adds durability. These features combined create cut protection that is lightweight, comfortable, and offers excellent dexterity. Looking for a pair of highly cut-resistant yet lightweight gloves? Look no further than MCR Safety Cut Pro..Abrasion- and puncture-resistant pair of work gloves helps reduce hand fatigue on long hardworking days.Size: XL.Features an 18-gauge Hypermax synthetic fiber shell in green with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 5, ANSI Puncture Level 3, and OEKO-TEX standards.Lightweight and extremely comfortable.Black palm helps hide dirt and grime.Sanitized with ActiFresh to prevent odors and eliminate bacteria caused by perspiration on the gloves' surface.Friendly touch-screen design allows users to operate phones or other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of cut-resistant work gloves features an 18-gauge Hypermax shell coated with a thin layer of black nitrile on the palm and fingers. A reinforced thumb crotch adds durability. These features combined create cut protection that is lightweight, comfortable, and offers excellent dexterity. Looking for a pair of highly cut-resistant yet lightweight gloves? Look no further than MCR Safety Cut Pro..Abrasion- and puncture-resistant pair of work gloves helps reduce hand fatigue on long hardworking days.Size: XXL.Features an 18-gauge Hypermax synthetic fiber shell in green with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 5, ANSI Puncture Level 3, and OEKO-TEX standards.Lightweight and extremely comfortable.Black palm helps hide dirt and grime.Sanitized with ActiFresh to prevent odors and eliminate bacteria caused by perspiration on the gloves' surface.Friendly touch-screen design allows users to operate phones or other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of cut-resistant work gloves features an 18-gauge Hypermax shell coated with a thin layer of black nitrile on the palm and fingers. A reinforced thumb crotch adds durability. These features combined create cut protection that is lightweight, comfortable, and offers excellent dexterity. Looking for a pair of highly cut-resistant yet lightweight gloves? Look no further than MCR Safety Cut Pro..Abrasion- and puncture-resistant pair of work gloves helps reduce hand fatigue on long hardworking days.Size: M.Features an 18-gauge Hypermax synthetic fiber shell in green with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 5, ANSI Puncture Level 3, and OEKO-TEX standards.Lightweight and extremely comfortable.Black palm helps hide dirt and grime.Sanitized with ActiFresh to prevent odors and eliminate bacteria caused by perspiration on the gloves' surface.Friendly touch-screen design allows users to operate phones or other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of cut-resistant work gloves features an 18-gauge Hypermax shell coated with a thin layer of black nitrile on the palm and fingers. A reinforced thumb crotch adds durability. These features combined create cut protection that is lightweight, comfortable, and offers excellent dexterity. Looking for a pair of highly cut-resistant yet lightweight gloves? Look no further than MCR Safety Cut Pro..Abrasion- and puncture-resistant pair of work gloves helps reduce hand fatigue on long hardworking days.Size: XS.Features an 18-gauge Hypermax synthetic fiber shell in green with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 5, ANSI Puncture Level 3, and OEKO-TEX standards.Lightweight and extremely comfortable.Black palm helps hide dirt and grime.Sanitized with ActiFresh to prevent odors and eliminate bacteria caused by perspiration on the gloves' surface.Friendly touch-screen design allows users to operate phones or other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of cut-resistant work gloves features an 18-gauge Hypermax shell coated with a thin layer of black nitrile on the palm and fingers. A reinforced thumb crotch adds durability. These features combined create cut protection that is lightweight, comfortable, and offers excellent dexterity. Looking for a pair of highly cut-resistant yet lightweight gloves? Look no further than MCR Safety Cut Pro..Abrasion- and puncture-resistant pair of work gloves helps reduce hand fatigue on long hardworking days.Size: L.Features an 18-gauge Hypermax synthetic fiber shell in green with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 5, ANSI Puncture Level 3, and OEKO-TEX standards.Lightweight and extremely comfortable.Black palm helps hide dirt and grime.Sanitized with ActiFresh to prevent odors and eliminate bacteria caused by perspiration on the gloves' surface.Friendly touch-screen design allows users to operate phones or other smart devices without removing the gloves

The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of cut-resistant work gloves features an 18-gauge Hypermax shell coated with a thin layer of black nitrile on the palm and fingers. A reinforced thumb crotch adds durability. These features combined create cut protection that is lightweight, comfortable, and offers excellent dexterity. Looking for a pair of highly cut-resistant yet lightweight gloves? Look no further than MCR Safety Cut Pro..Abrasion- and puncture-resistant pair of work gloves helps reduce hand fatigue on long hardworking days.Size: S.Features an 18-gauge Hypermax synthetic fiber shell in green with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 5, ANSI Puncture Level 3, and OEKO-TEX standards.Lightweight and extremely comfortable.Black palm helps hide dirt and grime.Sanitized with ActiFresh to prevent odors and eliminate bacteria caused by perspiration on the gloves' surface.Friendly touch-screen design allows users to operate phones or other smart devices without removing the gloves

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: XL (10).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: 2XL (11).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: M (8).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and an enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without the bulk. These gloves are perfect for work in cold, wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures; great for work in cold, wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: L (9).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: S (7).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

G-Tek MaxiFlex XL Ultimate seamless knit work gloves in dark gray/black color are designed to protect your hands from debris and dirt. Gloves offer resistant to chemicals, water and ultraviolet light..MicroFoam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance.Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves.Knit Wrist helps prevent dirt and debris from entering the glove.Silicone and Latex free.360° Breathability - Patented micro-foam nitrile coating offers 360° breathability, making it the most breathable glove on the market today.25% Thinner - Than most foam nitrile gloves on the market while offering twice the mechanical performance.Form, Fit and Feel - Mimics the "hand at rest", reducing hand fatigue and increasing comfort.Consistent Liner Penetration - From the nitrile, leaving only the soft liner resting against the skin.Latest Knitting Technology - Utilized to produce smooth and rounded fingertips, improving fingertip sensitivity.Optimized Grip - The micro-cup finish allows for a controlled grip.All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation.This glove has been laundered prior to final packaging making it clean and safe for use.The Oeko-Tex® Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin.The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product.Complies with FDA food handling requirements 21 CFR, Part 177.This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (34-875V).EN 388 2016 RESULTS: 4131X.Designed and developed as a breathable glove, MaxiFlex® Ultimate™ has become the benchmark for precision handling in dry environments.