PCIe Adapters

The N-GXE-POE-xx-01 Series is a Fiber Gigabit Ethernet PCIe Network Interface Card (NIC) which provides connectivity to a secure fiber network while also delivering power to a PoE powered device (PD), such as a VoIP phone, with a copper UTP interface. It fully complies with all IEEE 802.3z and 1000Base-X standards, providing up to 2000 Mbps full-duplex bandwidth capacity. Developed to support high-end users, this (2) port NIC has (1) 1000Base-X fiber network interface port (SFP version is 100/1000Base-X) and (1) switched 10/100/1000Base-T port supporting IEEE 802.3at PoE+ power. It is designed to allow a PC to power a VoIP phone, or any other traditional copper powered device, over a secure fiber network. Additionally, the NIC also has the ability to provide traffic switching functions between the copper and fiber ports, even when the PC is in a sleep mode. Combining the functions of PC connectivity and VoIP phone connectivity into one device saves installation time, expense, and the space of having two devices at the desktop. When the VoIP traffic is filtered and prioritized by third-party devices like an Ethernet switch and the IP phone, this PoE NIC will pass all tagged traffic ensuring users experience a high level of Quality of Service (QoS). VLANs and Prioritization can also be configured at the NIC via Lantronix' PoE NIC utility software..Supports Full-duplex Mode.Supports IEEE 802.3x Full-Duplex Flow Control.Supports PCIe x1 bus.Compliant with PCIe Rev 2.1 Interface

The Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Dual Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system..Dual-port Ethernet network adapter with an OCP 3.0 interface that supports 10/25 Gigabit Ethernet connectivity.Supports a maximum data transfer rate of up to 25,000 Mbps.Features two high-speed Ethernet ports.Compatible with Dell PowerEdge servers that support the OCP 3.0 interface, including models like R650, R750, R760, C6520, C6620, T550, T560, XE8640, XE9680, XR5610, and XR7620

When compared to a laptop, a desktop computer offers several advantages, perhaps the most important is that you can continue to upgrade it over time. So adding more USB ports is a viable option. This is particularly true for someone who needs more and better peripherals, such as gamers or YouTubers who require multiple USB-enabled devices connected at once..4-Port PCIe Host Card.Dimensions: 0.79" x 2.68" x 3.35".Transfer speeds for data 5Gbps.Warranty: 2 Years Limited.Reproductive Harm - www.P65Warnings.ca.gov.

The HP Integrated Remote System Controller (7K6D9AA) provides secure, remote access and management for HP workstations. With support for Redfish® API, it integrates seamlessly into hybrid IT environments and enables centralized control without VPNs. Featuring onboard virtual media, remote power control, and hardware alerts, it enhances uptime and simplifies fleet management. Compatible with Z by HP platforms, it offers flexible internal or external installation and includes embedded software for direct BIOS access and bare metal imaging..PCIe interface as an expansion card for non-gaming workstation control..Secure 5Gbps data transfer across USB and internal signal ports..Remote access without VPN, ideal for hybrid IT environments..Plug-in card with 4 ports for internal and external connectivity..Compatible with Z by HP workstations; supports Mini DisplayPort™ output..Requires supported HP platforms and optional adapter for G4 series systems..Meets TLS 1.2 encryption and TPM 2.0 security standards for enterprise use..HP’s standard one-year limited hardware warranty.

Expand SATA storage on a PCIe desktop with the SIIG DP SATA II controller. It adds two SATA channels for connecting up to two drives and supports transfer rates up to 3.0 Gb/s. Advanced features such as 48‑bit LBA for large capacities, Native Command Queuing, scatter/gather, and independent command execution help ensure fast and reliable throughput. Ideal for simple storage additions and backups, it installs easily and integrates with modern operating systems for dependable everyday performance..Up to 3.0 Gb/s transfer rates for responsive data access..Supports NCQ and 48‑bit LBA for large, efficient storage..PCIe interface enables easy desktop expansion.

This card lets you to add two RS 232 and two RS422/485 serial ports to your PC through a PCI-Express expansion slot..Interface: RS-232, 422, 485 serial.Data transfer rate: Up to 460 Kbps.Ports: 4 x 9-pin DB-9 male RS-232/422/485 serial.Form factor: Plug-in card.Platform supported: PC.Number of ports: 4.Compatibility: Windows 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows Server 2008 R2, 2003(32/64), Linux Kernel 2.6.x.Card type: Standard profile.Chipset ID: SystemBase - SB16C1052PCI.Connector type: 1 x PCIe male.Operating Temperature: 0 to 100 deg C.Dimensions: 2.7"(H) x 0.6"(W) x 5.3"(L).Standard and low-profile bracket included, supports 2-wire/4-wire RS485 modes, 256-byte deep FIFO per transmitter and receiver.Applications: Monitor and control industrial machines on an assembly line or in a production environment, Bank teller workstations in either full profile or low profile, self-service automated machines and kiosks to control serial devices.Package contents: 1 x PCIe serial combo card, 1 x breakout cable, 1 x low profile bracket, 1 x driver CD, 1 instruction manual.Weight: 2.4 oz..Certification and standards: Green compliant, CE, ROHS, FCC, PCI power management 1.1, PCI-express specification 1.0a.Warranty: Lifetime limited.Startech.Com® PEX4S232485 PCI Standard Profile Serial Combo Card is a single card solution that is compatible with nearly any serial communication protocol, supporting RS-232, RS-422, RS-485 2-wire or RS-485 4-wire operating modes.

The Broadcom NetXtreme Gigabit Ethernet Adapters are a family of high performance PCIe and OCP adapters. The adapters are available with either two ports or four ports and are supported on ThinkSystem and System x servers. Did you know? The NetXtreme Quad Port Ethernet Adapter is an ideal way to implement a virtualization solution using your existing Gigabit Ethernet network. With four copper-based Gigabit ports on a single PCI Express 2.0 x4 interface, the adapter provides the density and capacity you need to support large numbers of virtualized systems on one server..This 2000MB/s bandwidth adapter is ideal for PCs with PCI Express 2.0 x4 slots, ensuring top level network connectivity for your desktops.With quad ports on a single card, save valuable expansion slots on your system for other purposes.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable

Turn your Ubuntu/Linux PC or QNAP NAS into a high-performance and secure wireless access point/base station The QWA-AC2600 is a 2.4/5 GHz Dual Band Dual Concurrent (DBDC), 4 x 4 Multi-user MIMO (MU-MIMO), low-profile PCI Express (PCIe) 2.0 x1 wireless adapter with two Qualcomm QCA9984 NICs that supports up to 2533 Mbps (800 Mbps for IEEE 802.11n (2.4 GHz) and 1733 Mbps for IEEE 802.11ac (5 GHz)). The QWA-AC2600 can be used as an access point or a base station with Ubuntu/Linux PCs or QNAP NAS. Combining the higher compatibility of 802.11n and faster connection of 802.11ac, the QWA-AC2600 enables versatile applications including wireless LANs in the workplace and Internet of Things (IoT) deployment in the field. The QWA-AC2600 utilizes the 802.11n and 802.11ac standards and offers speeds up to 2533 Mbps to deliver a low-latency, high-speed wireless experience. The QWA-AC2600 supports 4 x 4 MU-MIMO technology for communicating with multiple clients with multiple signal lanes (spatial streams). The QWA-AC2600 features an 80 cm high-frequency coaxial cable for extending the antennas' magnetic stand base for flexible deployment and coverage. The QWA-AC2600 supports Dual Band Dual Concurrent (DBDC) for acting as an access point or a base station, adding more possibilities to your investment. The QWA-AC2600 comes with four 5 dBi detachable omni-directional high-gain antennas. The universal RP-SMA connectors enable antenna replacements for boosting signals and coverage. The QWA-AC2600 has an active cooling module to ensure optimal heat dissipation. The fan will adjust its speed to match the temperature of the module. A tailor-made private wireless network that meets your needs The QWA-AC2600 is compatible with most PCIe-enabled QNAP NAS. When used with the WirelessAP Station app your NAS will evolve into a high-performance wireless access point that can be connected to from multiple devices. The QWA-AC2600 can also be used to extend your wireless network coverage. Combined with useful features (including DHCP and NAT) provided by the Network and Virtual Switch app, the QWA-AC2600 can be used for a variety of applications, delivering private, fast, low-latency and secure connectivity across your home and/or workplace..This wi-fi adapter uses the IEEE 802.11ac technology with speed up to 2.54 Gbit/s for an optimal wireless signal.Ensures broad compatibility with multiple devices.Optimized for reliable and consistent performance.Enhances productivity with user-friendly features.Engineered for superior quality and dependability

The Allied Telesis 2911 series AT-2911SX/SC 1000SX network adapter has PCI Express x1 host interface, one SC port and RJ-45 port for connectivity. It is compatible with PC. This adapter measures 2.7" x 3.6". It has link activity and link OK status indicators. This adapter has ACPI support, auto-negotiation, flow control, full duplex mode, jumbo frames support, load balancing and VLAN support. It comes with full-height bracket and low-profile bracket. The Gigabit Ethernet adapter offers data transfer rate of 1 Gb/s..Network adapter interface: PCI Express x1.Network adapter speed: 100 Mbps.Multi-mode fiber.Network adapter ports: 1 x SC.Network technology: 1000Base-SX.Form factor: Plug-in card.Connector type: SC.Cabling type: Ethernet 1000Base-SX.Connectivity technology: Wired.Data link protocol: Gigabit ethernet.Max transfer distance: 220 m.Network transport protocol: TCP/IP.Dimensions: 2.7"(H) x 3 1/2"(W).Weight: 0.13 lbs..Compliant standards: IEEE 802.1p.Allied Telesis Desktop fiber adapter offers high reliability, detailed tests, diagnostics and analysis. Supports network interface card for enhanced bandwidth and bus efficiency.

Allied Telesis™ Gigabit ethernet card is featured with jumbo frames to send large packets and these packets are normally up to 9000 bytes long. Gigabit ethernet is featured with PCIe x1 bus to enable maximum throughput..Flow control, ACPI support, auto-negotiation, load balancing, VLAN support, full duplex mode, jumbo Frames support.Data transfer rate: 1 Gbps.Host interface: PCI Express x1.Dimensions: 2.7"(H) x 3.6"(W).Form factor: Plug-in card.Wavelength: 850 nm.Max transfer distance (Optical): 720'.Status indicators: Link activity, link OK.Card height: Full-height, low-profile.Optical sensitivity: -17 dBm.Output optical power: -9.5/-1.5 dBm.Multi-mode fiber.VLAN support.jumbo frames.Weight: 2.08 oz..Allied Telesis™ Gigabit ethernet card is used to boost the speed of the network and is limited to a maximum size of 1548 byte.

Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer.Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.Dual-port Gigabit Ethernet, PoE support

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.This 250 MB/s bandwidth PCI Express adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable.Up to 8 DECT cordless handsets

This Thunderbolt 3 PCIe expansion chassis lets you add a PCI Express card to your laptop or desktop computer, through an external Thunderbolt 3 connection. The chassis also features a DisplayPort video output, so you can connect an additional monitor to your laptop, and supports Thunderbolt 3 daisy chaining, so you can expand your workstation even further..Increased productivity with Thunderbolt 3 and up to 40Gbps bandwidth - twice the speed of Thunderbolt 2 (20Gbps) and eight times faster than USB 3.0 (5Gbps).Supports one 4K DisplayPort monitor, and a second extended monitor display through the Thunderbolt 3 (USB-C) port.Daisy chain up to six Thunderbolt 3 devices.Supports 5K Thunderbolt displays.Supports half-length and dual-slot PCIe card standards at all heights, with standard profile slot brackets.Durable aluminum construction.Works on Mac and Windows® computers.Internal 60 cm cooling fan.Add an external PCIe (PCI Express 3.0) x16 slot and a DisplayPort connection to your Thunderbolt 3 equipped MacBook or laptop

1-Port 2.5GbE M.2 2280 Network Card, Multi-Gigabit Speeds (2.5G/1G/100M/10M), NBASE-T (802.3bz) NIC, M.2 B+M Key, PCIe Ethernet Interface, For SFF/Desktop PCs.High-performance M.2 Ethernet 2.5Gbps network card with Intel I225-V-chip; Multi-gigabit; Leverage existing Cat5e/Cat6 cabling (or better); NBASE-T (802.3bz); PCI Express M2 2280 B or M key compatible.M.2 2280 form factor is ideal for upgrading systems that do not have PCIe expansion slots or where slots are already in use; Includes 2ft (60cm) M/F Cat6 cable adapter for running Ethernet port to full/low-profile bracket on the rear of the PC.2.5GBASE-T variable speed options (2.5/1Gbps and 100/10Mbps) with auto-negotiation; Supports B or M key M.2 PCIe Gen 2 slots; Network interface card for PC is compatible with Windows/VMware/Linux; Full and low profile bracket included.Intel vPro® for remote management and troubleshooting; PXE boot enabled for faster deployment/updates; 9K jumbo frame for reduced packet overhead; Remotely boot a system using WoL; VLAN support for efficient network management.Designed and built for IT Professionals, this 2.5 GbE M.2 NIC is backed for two years, including free lifetime 24/5 multi-lingual technical assistance.This Ethernet card supports the following advanced features: PXE Boot, Wake-on-Lan (WoL), VLAN tagging, 9K jumbo frame, half-duplex, auto-negotiation, and Error Correcting Memory (ECC) for optimal network functionality..This 2.5 GbE M.2 Network Interface Card (NIC) features an Intel I225-V chipset with Intel vPro® technology, for enhanced performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support of new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding 2.5GBASE-T (802.3bz) compatibility for seamless integration.

The StarTech ST1000SPEXI gigabit Ethernet network card features gigabit Ethernet PCI Express x4 interface card with single RJ-45 port. The RJ-45 port is fully compatible with IEEE 802.3/U/AB standards and offers maximum throughput up to 1000 Mbps auto-negotiation. Advanced features such as jumbo frames, wake-on LAN, auto MDIX and VLAN tagging for optimizing network traffic. Network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich gigabit networking..Gigabit Ethernet network card is suitable for use with PC.Powerline adapter speed: 2000 Mbps.Features 10/100/1000base-T RJ-45 connector.Dimensions: 0.7"H x 2.6"W x 4.7"L.Power consumption: 0.8 W.Meets RoHS, Green compliant certification and standards.PCI Express host interface is for better performance.Form factor: Plug-in card.Supports twisted pair for transmission of both analog and digital signals.Intel I210-AT chipset allows interface card to be compatible with different operating systems.Includes 1-port network card, low profile bracket and instruction manual.Weight: 1.2 oz..Comes with 2 years warranty.The StarTech 2000 Mbps gigabit Ethernet network card is based on Intel I210-AT chipset, that makes it compatible with Windows and Linux operating systems.

Chelsio T6 Dual Port 40G/50G/100GbE Adapter provides high-speed connectivity for enterprise storage networks. Featuring Chelsio T6 Dual Port 40G/50G/100GbE Adapter - PCI Express 3.0 x16 - 100 Gbit/s - 2 x Total Fiber Channel Port(s) - 2 x Total Expansion Slot(s) - QSFP28 - Plug-in Card, it ensures reliable performance for demanding SAN environments. Ideal for data centers requiring low latency and high throughput..Data Rate: 100 Gbit/s.Ports: 2 x Total Fiber Channel Port(s).Form Factor: Plug-in Card

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.This 8000 MB/s bandwidth PCI Express 3.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

Two 10GbE Ports with SR-IOV and iSCSI, Block-based, Supports Multiple Virtual Disk Modes The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers. Build a 10GbE Network Environment The QXG-10G2T-X710 can be used with QNAP's 10GbE switches, such as the QSW-M2108-2C or QSW-1208-8C, for you to build a budget-friendly high-speed network environment..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The QXG-10G2T is a highly energy efficient and cost-effective 10 GbE network expansion card, which is suitable for a team requiring simultaneous data access with multiple members, or a photographer/videographer requiring super-fast data transmission. 5-speed Supports five speeds (10GbE / 5GbE / 2.5GbE / 1GbE / 100MbE). NAS and PC The QXG-10G2T can be installed in a QNAP NAS or Windows® PC. Marvell® AQtion Controller AQC107 Highly energy efficient and cost-effective. PCIe 3.0 PCIe Gen 3 x4 provides up to 32 Gbps transfer speeds. Efficient cooling module Keeps the QXG-10G2T cool and maintains high performance. LED indicators Monitor the real-time status of ports with handy LED indicators. Supports NAS and PC OS QNAP Network Expansion Cards support NAS operating systems (QTS and QuTS hero), Windows® 10 and Linux®, allowing you to maximize the performance potential of all your networked devices. Gain up to 20 Gbps connectivity By virtually bundling two 10 GbE ports with SMB multichannel or port trunking, you gain larger bandwidth for your QNAP NAS. Let's see which features are suitable for your usage scenarios: SMB Multichannel: Multiply the available bandwidth (20 Gbps) between NAS and directly-connected clients. Suited for personal use. Port trunking: Increases file access efficiency for simultaneous data access with multiple members. Recommended for users who deploy network switches in their IT infrastructure. Build a 10 GbE network environment Increase your IT performance and productivity by using the QXG-10G2T with QNAP's 10 GbE switches to build budget-friendly high-speed network environments. Fully unleash your network with a companion switch Build your ideal network environment to satisfy connectivity demands and streamline various storage applications..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The StarTech ST4000SPEXI 2000 Mbps Gigabit Ethernet network card is compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS. It supports twisted pair cable, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames up to 9K. This network card installs easily into a broad range of computer/server chassis, regardless of form factor..Network card helps to add more network ports to a workstation or server for redundancy or virtualization.Offers 20000 Mbps speed for fast, high-bandwidth connectivity.Supports four PCI Express x4 and four RJ-45 ports for good connectivity.Dimensions: 4.7"H x 0.7"W x 5.2"L.Installs easily into a broad range of computer/server chassis, regardless of form factor.Power: 4.4 W.Meets RoHS, FCC, CE compliant certification or standards.Form factor: Plug-in card.Supports twisted pair media type, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames upto 9K.Compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS.LED indicators: 4 x 100/1000 Mbps, 4 x link/activity, Network technology: 10/100/1000Base-T.Environmental conditions: 41 - 122 deg F operating temperature, -4 - 140 deg F storage temperature, 20 - 80% RH humidity.Offers PXE network boot, auto MDIX and negotiation support, wake-on-LAN support, full or low-profile installation and full duplex support.Includes low-profile bracket and instruction manual.Weight: 3.4 oz..Comes with 2 years warranty.The StarTech 2000 Mbps Gigabit Ethernet network card adds more network ports to a workstation or server for redundancy or virtualization.

The Solarflare® Flareon Ultra SFN8542-Plus 40 Gigabit 2-port server adapter delivers faster, more efficient processing of network traffic to accelerate a wide range of applications. This adapter accelerate, monitor and secure you network by providing ultra low latency, high packet rate, internal switch for single core/4 port operation and 16 lanes PCIe 3.1 for full 2 x 40 Gbps bidirectional performance..Server adapter delivers faster, more efficient processing of network traffic.Host interface: PCI Express 3.1 x16, total number of ports: 2, expansion slot: QSFP+.Dimensions: 6.6"L x 2.7"W.Power: 10 W (typ).Green, RoHS compliant.Form factor: Plug-in module.Card height: Low profile, end bracket height: PCI Express standard 4.725", PCI Express low profile: 3.12".Management: SNMP, ACPI v3.0.Media type supported: Optical fiber.Network technology: 40GBase-X.Compatible with server.IEEE802.3-2012 Ethernet base standard, including 802.3bx, 802.3bd, 802.3x, 802.3ba (40G/s), 802.3ae (10 Gigabit Ethernet over fiber).Operating range: 0 - 50 deg C

2.5 GbE network expansion card delivers speeds of up to 2.5 Gbps. You can easily upgrade your home and office network infrastructure with existing cables..This 500MB/s bandwidth adapter is ideal for PCs with PCI Express 2.0 x1 slots, ensuring top level network connectivity for your desktops.This single port 2.5gigabit ethernet adapter enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.2.5GBase-T network technology for reliable connectivity with maximum productivity

HPE Gen10 Plus Ethernet Adapters HPE ProLiant DL, ML and Apollo Driven by hybrid cloud services, mobile data and streaming video applications, IT professionals are constantly challenged to deliver secure and reliable network bandwidth that cost-effectively scales to demands of the networking traffic. For any given workload, the right mix of performance, efficiency, reliability and security are paramount. HPE has your data center infrastructure covered with the latest networking adapters, switches, transceivers and cables for a complete end-to-end solution to support your various workload needs. With Gen10 Plus ProLiant Servers, HPE is offering the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.25GBase-X network technology for reliable connectivity with maximum productivity

The 5 GbE network expansion card delivers speeds of up to 5 Gbps. You can easily upgrade the transfer speed in your network environment with existing cables..The PCI Express 3.0 x2 interface provides smooth data transfer and outstanding performance.For high bandwidth connectivity, add this efficient dual port 5gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.5GBase-T network technology for fast, dependable connectivity with maximum efficiency

The 5 GbE network expansion card delivers speeds of up to 5 Gbps. You can easily upgrade the transfer speed in your network environment with existing cables..Enjoy superfast data transfer of up to 500 MB/s with PCI Express 2.0 x1 card, between the network card and motherboards.This single port 5gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.5GBase-T network technology for fast, dependable connectivity with maximum efficiency

The QXG-25G2SF-CX6 features an NVIDIA Mellanox® ConnectX®-6 Lx SmartNIC controller, supports PCIe Gen4 (backwards compatible with Gen3/ Gen2) and provides up to 25 Gbps transfer speeds (supports 10/25Gbps). By using Port Trunking to combine multiple ports, up to 50GbE can be achieved for accelerating file sharing and intensive data transfer. With SR-IOV support, the QXG-25G2SF-CX6 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers. High-speed 25GbE Networking The TS-h3088XU-RP supports 25GbE networking, and can be used with the QXG-25G2SF-CX6 to expand network connectivity. It can also be used with a 25GbE Switch to build a budget-friendly high-speed network environment. Strengthen Your virtualization Environment with SR-IOV and RoCE The QXG-25G2SF-CX6 supports SR-IOV, which can allocate bandwidth resources from a physical network card directly to VMs. It ensures reliable VM applications and reduced CPU overheads. The QXG-25G2SF-CX6 also supports RoCE, which can access a network directly in RAM to effectively reduce latency and enhance performance and efficiency for VMware® virtualization environments. Ensure reliable data transfer with Forward Error Correction (FEC) The QXG-25G2SF-CX6 supports FEC to overcome packet loss - a potentially common occurrence in fast, long-distance networks. FEC helps the receiving side detect and recover lost data to correct bit errors, thus ensuring reliable data transmission over "noisy" communication channels. With three FEC modes, you can use a suitable cable and switch to build an optimal network environment. Supports Windows and Linux servers/workstations Besides QNAP devices, the QXG-25G2SF-CX6 supports many platforms, including Windows® 10, Windows Server®, and Linux® (driver required) which allows you to attain optimal business performance for a wider range of system applications and services. The higher bandwidth density with reduced links helps reduce cabling footprint and operational costs..The PCI Express 4.0 x8 interface provides smooth data transfer and outstanding performance.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components

Boost your network infrastructure with the QNAP 25Gigabit Ethernet Card, delivering faster and more efficient connectivity for clients, servers, or workstations. The PCI Express 4.0 x8 host interface ensures dependable data transfer and maximum efficiency. Add high-bandwidth dual-port 25GbE connectivity to your system, supporting optical fiber cables for long-distance transmission and exceptional data rates. The 25GBase-X technology enables convenient, high-speed data sharing across your network..PCI Express 4.0 x8 host interface ensures dependable data transfer for maximum efficiency.For high bandwidth connectivity, add this efficient dual port 25gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.25GBase-X network technology for convenient, easy sharing of data and information with maximum feasibility

Startech.com® RAID control card balance the performance of SSD storage with the cost-effectiveness and large capacity of standard hard drives. Control card supports port multiplier that connects multiple SATA drives to one port over a single cable..Interface: SATA.Data transfer rate: 6 Gbps.Ports: 4.Bus type: PCI express.Card type: Standard profile, LBA support: 48 bit.Port style: Integrated on card.Host interface: 2 x PCI express 2.0.Internal ports: 4 - SATA (7 pin, data) plug, controller type: serial ATA/600.RAID levels: JBOD, 1, 0, 1+0.Number of ports: 4 (SATA).Form factor: Plug-in card.HyperDu technology offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives.Maximum drive capacity: Up to 4TB per drive.Dimensions: 2.8inch(H) x 4.7inch(W) x 0.8inch(T).Software: OS compatibility: Windows XP (32/64-bit)/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit), Mac OS 10.6 /10.7 /10.8, Linux.Platform supported: PC, Mac.Environmental conditions: 5 - 50 Deg C operating temperature, 20 - 80% humidity.Requirements: Available PCI express x2 slot (backward compatible with x4, x8, and x16 slots).Package contents: PCIe SATA controller card, low profile bracket, driver CD, instruction manual.Warranty: 2 years limited.Startech.com® RAID control card can be connected to a computer through a PCI Express x2 slot to provide multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives.

The Synology M2D20 adapter adds M.2 NVMe SSD support to your NAS for faster caching and improved responsiveness. Compatible with 22110 and 2280 form factors, it enables latency-sensitive applications to run smoothly. Designed for easy installation, it helps optimize performance without using drive trays..Supports 22110 and 2280 form factors for flexibility..Improves responsiveness for demanding applications..Installs easily without occupying drive bays.

HPE Gen10 Plus Ethernet Adapters HPE ProLiant DL, ML and Apollo Driven by hybrid cloud services, mobile data and streaming video applications, IT professionals are constantly challenged to deliver secure and reliable network bandwidth that cost-effectively scales to demands of the networking traffic. For any given workload, the right mix of performance, efficiency, reliability and security are paramount. HPE has your data center infrastructure covered with the latest networking adapters, switches, transceivers and cables for a complete end-to-end solution to support your various workload needs. With Gen10 Plus ProLiant Servers, HPE is offering the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

The Synology E10M20-T1 combines 10GbE networking and M.2 SSD caching in one PCIe card, boosting NAS performance and bandwidth simultaneously. It supports multiple Ethernet speeds and advanced offloading features for optimized network efficiency. Perfect for accelerating storage and connectivity without occupying multiple slots..Supports auto-negotiation up to 10Gb/s for flexibility..Advanced offloading features improve network efficiency..Ideal for boosting NAS speed and bandwidth together.

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

Experience ultra-fast networking with the QNAP 10Gigabit Ethernet Card, ideal for upgrading client, server, or workstation connectivity. The PCI Express 3.0 x4 interface provides enhanced bandwidth for rapid data access and application performance. Easily connect to wired networks with a single port adapter for hassle-free, responsive networking. Supports cost-effective twisted pair cables for data transfer up to 100 meters, and 10GBase-T technology delivers up to 10Gbps speeds..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.Connect to a wired network with this single port network adapter for a hassle-free and quick response.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Is your data center constantly challenged to deliver increased security and reliability in a cost-effective and scalable solution for your network bandwidth? The HPE Gen10 Plus Ethernet adapters are 1 Gb, 10 Gb, 10/25 Gb, 100 Gb, and 200 Gb Ethernet solutions that are scalable and compatible with HPE Gen10 Plus servers for hybrid cloud services, mobile data, and streaming video applications. Your server is the foundation of your data center, but it doesn't work alone. When one link in your component chain slows down, so does the rest of your operation. Keep your network and data flowing with a seamless ecosystem of HPE servers, networking adapters, transceivers, cables, and switches. FEATURES | Better Performance HPE Gen10 Plus Ethernet adapters are engineered for an assortment of bandwidths and latency-sensitive applications. The adapters reduce CPU utilization with support for a variety of I/O offloads including remote direct memory access (RDMA) and tunneling. Reliability and Security HPE Gen10 Plus Ethernet adapters authenticate updates for NICs, and help ensure that signed firmware is correct and trusted to reduce rogue firmware installation. The adapters protect applications, data, and server infrastructure by authenticating digitally-signed firmware via a root-of-trust architecture..This 8000MB/s bandwidth adapter is ideal for PCs with PCI Express 3.0 x8 slots, ensuring top level network connectivity for your desktops.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Next Generation NVMe Mobile Rack: The MB601VK-B is ICY DOCK's next generation PCI-E based mobile rack with ability in supporting Intel, Micron, and Seagate ultra high speed 2.5" U.2 NVMe solid-state-disk in an external 3.5" floppy drive bay. Superior Performance : Built with the next generation U.2 interface, MB601VK-B offers up to 32Gb/s of bandwidth and supports 2.5" U.2 NVMe SSD, SAS and SATA interface 2.5" solid state drives or hard drives. The superior performance of MB601VK-B provides the maximum amount of transfer speed for the most data intensive tasks; such as real time large database transfers and refreshes, massive bulk data swaps from multiple networks, VMware providing virtual operating systems for mulitple computers, and large scale editing of large multimedia assets of virtual reality, video, music, and other graphics between multiple workstations. Convenient Utility Accessibility: The EZ Slide Mini trays supports U.2 hot-swap feature, which makes U.2 NVMe SSD interchangeability and maintenance completely hassle-free. With a simple swap of the SSD / HDD, your overall down time is greatly reduced especially when a drive is needed to be switched. The tray is also designed to accommodate 7 to 15mm height hard drives and SSD, creating a 2.5" hot swap bay for U.2 NVMe SSD or any standard SAS / SATA hard drives and SSDs. While the tray is not inside the MB601VK-B, the Anti-Dust Flap feature helps prevent dust from entering into the mobile rack. The front of the MB601VK-B includes a status LED when the drive is powered on, off and accessed. Active Power Technology (APT) allows the status LED to be on only when a hard drive is inserted into the enclosure. For drive security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed. Additionally, the 2 segment key lock provides extra protection to theft of hard drives as well as safeguards any sensitive data. Full Metal Protection: Making sure that the material used is designed in a way where it can be relied upon for many years after its deployment, the MB601VK-B is constructed out of heavy duty metal throughout the entire device and is capable of holding up in the harshest environments. With the Full Metal design, the ToughArmor is perfect for industrial, military and medical devices that may require a flammability rating as the full metal material is considered to be compliant with flammability requirements..Fits 1 x 2.5" U.2 NVMe SSD or 2.5" SAS / SATA SSD / HDD.NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD / HDD.Fits any external 3.5" drive bay or floppy bay

The QNAP QM2-2P-244A expansion card adds two M.2 SSD slots to your NAS for SSD caching or auto-tiering volumes. Featuring PCIe connectivity, it boosts performance without using 3.5-inch drive bays. Built-in thermal sensors and a quiet cooling module prevent overheating, while LED indicators provide status updates. Ideal for improving NAS speed and efficiency..PCIe interface ensures fast, reliable data transfer..Cooling module minimizes overheating risks..LED indicators monitor SSD status in real time.

The QNAP QM2-2P10G1TB expansion card adds two M.2 NVMe SSD slots and a 10GbE RJ45 port to your NAS, delivering high-speed storage and networking in one solution. PCIe Gen3 x8 interface ensures fast data transfer, while Qtier technology optimizes storage efficiency. A cooling module and thermal sensors maintain stable performance..Provides 10GbE connectivity for high-speed networking..PCIe Gen3 x8 interface maximizes throughput..Cooling system prevents overheating during heavy use.

The QNAP QM2-2P410G2T expansion card offers two M.2 NVMe SSD slots and dual 10GbE ports for future-proof NAS performance. Built with PCIe Gen4 technology, it delivers exceptional bandwidth for demanding workloads. Integrated cooling and monitoring features ensure reliable operation in enterprise environments..Two 10GbE ports provide advanced network connectivity..PCIe Gen4 interface supports ultra-fast data transfer..Cooling module and sensors maintain optimal performance.

This 4-port RJ45 1Gbps OCP 3.0 Network Interface Card (NIC) features an Intel® i350-AM4 Ethernet Controller, enhancing performance and data integrity. The Ethernet card adheres to OCP 3.0 standards and ensures broad compatibility, making it an ideal solution for reliable network connectivity and robust data transfer capabilities. Optimized Network Efficiency Leverage existing Cat5e/Cat6 cabling (or better) up to 100m to maximize existing networks and equipment. The NIC supports variable speed options (10/100/1000 Mbps) with auto-negotiation and 9K jumbo frames to reduce packet overhead, reducing network slowdowns..4-Port RJ45 Gigabit OCP 3.0 Server Network Card, 1 Gbps.Maximum Data Transfer Rate 1Gbps.Number of ports 4.OS Compatibility Windows Server 2012, 2012 R2, 2016, 2019, 2022, 11, 10 VMware ESXi 7.x Linux 2.4.x and up - LTS Versions only.Chipset Model I350-AM4.Media Type Supported Twisted Pair.Form Factor: Plug-in Card.Limited Warranty 2 Year

This Intel add-on card instantly adds a Wi-Fi 6E gaming module to your desktop. The card is based on the Intel Killer Wi-Fi 6E AX1675 module that supports 6GHz spectrum, which allows gamers to game wirelessly with confidence because the 6GHz bands are not used by older, legacy devices. The AX1675 is a 2 x 2 6E module that supports 160MHz channels and Bluetooth 5.3, delivering up to 2.4Gbps of throughput, low latencies, and highly reliable connections. This card fits into any available PCIe slot from x1 to x16 links and supports Bluetooth for easy pairing with keyboards, mice, headphones, and other Bluetooth gadgets. Paired with a 2T2R extendable antenna to improve your Wi-Fi performance..This expansion card instantly adds a Wi-Fi 6E gaming module to your desktop.Delivers up to 2.4Gbps of throughput for low latencies and highly reliable connections.Fits into any available PCIe slot from x1 to x16 links and supports Bluetooth for easy pairing with keyboards, mice, headphones, and other Bluetooth gadgets.Prioritization Engine prioritizes games among other apps running at the same time and is capable of prioritizing both downlink and uplink traffic, so broadcasting is also protected.Intelligence Engine detects and recommends the best AP to connect online and ensures game or broadcast is always running at the best connection available.DoubleShot Pro enables multiple network paths to send traffic at the same time and makes sure the first priority runs at the primary path.Supports 6GHz bands that offer more 160MHz channels for superior gameplay.Paired with a 2T2R extendable antenna to improve your Wi-Fi performance.WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The PERC H965e RAID Controller Card from Dell offers reliability and performance in addition to providing management with the tolerant disk subsystem failures. This RAID controller Card offers expandable 8 GB storage capacity to improve the performance of your server systems. The double module channel provides high-speed connectivity. This product has been tested and validated on Dell systems to ensure compatibility with your computer. It is supported by Dell Technical Support when used with a Dell system..External RAID controller card for high-performance, fault-tolerant storage in Dell PowerEdge servers and JBODs.PCI Express 4.0 x16 host interface for high-speed data transfer and seamless integration with enterprise server architectures.Features internal SAS and SATA III connectors for high-speed connectivity to enterprise-grade storage drives.External Mini-SAS HD connectors for high-speed linkage to external JBODs and storage enclosures.22.5Gb/s SAS controller type for maximum storage expansion efficiency and optimal usability.Supports up to 240 physical drives for scalable enterprise storage configurations.RAID levels 0, 1, 5, 6, 10, 50, and 60 for flexible data protection and performance optimization.Compatible with a wide range of Dell PowerEdge servers, including models like R660, R760, R860, R960, and T560.Server device support for dependable storage expansion with optimal data transfer speed.NV Cache data backup type effectively restores and saves your valuable data in case of system damage.8 GB cache memory for convenient and quick access to the information to ensure maximum productivity.Plug-in Card form factor for your convenience and simplicity of usage

Store Fabric SN1200E 16Gb dual port fiber channel host bus adapter..Host bus adapter.Dimensions: 4.75"H x 0.845"W x 7.31"D.Port speed: 16 Gb/s fiber channel.Channels: Dual.Slot type: PCIe.Servers supported: HPE ProLiant platforms.Weight: 5.43 oz.3 years warranty

The Sonnet™ Echo express SE I expansion system includes power adapter, power cord, 0.5 m thunderbolt cable, thunderbolt connector retainer clip and documentation. It is compatible with low-profile PCIe card. It has two Thunderbolt 3 ports and 12 V power port external connectors. The system has 80 W universal adapter that has voltage rating of 100 - 240 VAC at 50 - 60 Hz. With rugged aluminum housing, the desktop form factor system has x8 mechanical and x4 electrical PCIe 3.0 expansion slots. This system offers 2750 MBps of PCIe bandwidth doubling the performance of Thunderbolt 2. The system withstands operating temperature of 32 to 95 deg F..Echo Express SE I expansion system is suitable for PCIe card.Dimensions: 3.5"H x 5.63"W x 8.63"D.External connectors: Two Thunderbolt 3 ports, 12 V power port, Compatible with one low-profile PCIe card.Power: 80 W, 100 - 240 VAC, 50 - 60 Hz universal adapter.Material: Rugged aluminum housing.Expansion slots: One x8 mechanical (x4 electrical) PCIe 3.0.Form factor: Desktop.System requirements: Mac with a Thunderbolt or Thunderbolt 2 port, macOS™ 10.12.1+, PC with a Thunderbolt 3, Windows® 10.Connects a PCIe expansion card to computers without slots.Offers 2750 MBps of PCIe bandwidth, doubling the performance of Thunderbolt 2.Energy saver mode powers on/off automatically with the computer.Remarkably quiet temperature-controlled, variable-speed fan automatically and quietly cools the card.Has PCIe 3.0 x8 slot for Thunderbolt 3-equipped notebooks, SFF desktop systems and other computers without a PCIe slot.Operating temperature: 32 to 95 deg F.Includes power adapter, power cord, 0.5 m thunderbolt cable, thunderbolt connector retainer clip and documentation.RoHS Compliant.Weight: 2.6 lbs..Comes with 1 year warranty.Echo Express SE I expansion system provides a PCIe 3.0 x8 slot for Thunderbolt 3-equipped notebooks, SFF desktop systems, and other computers without a PCIe slot.

25GbE connectivity for seamless integration to modern enterprise networks | Throughput Increase network performance with 25GbE connectivity Flexibility Optical SR, Optical LR, and DAC support Compatibility Designed for maximum performance and reliability in Synology systems High-performance connectivity upgrade | Flexible SFP28 options Support for short-range and long-range transceivers as well as DAC options enables flexible connectivity choices. Link aggregation Dual 25GbE ports can be combined into a Link Aggregation Group to boost throughput up to 50 Gb/s, while also providing port failover and load balancing functionality. CPU offloading and load balancing Support for CPU offloading and load balancing technologies enables optimal system performance. 5-year warranty At Synology, we are committed to product innovation and quality. Synology guarantees a robust and reliable data management experience with a 5-year limited warranty, providing responsive technical support and hardware replacement services to maximize your return on investment..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components

Cost-effective and reliable 10GbE connectivity for SMBs | Throughput Increase network performance with 10GbE connectivity Flexibility Easy integration to existing deployments Compatibility Designed for maximum performance and reliability in Synology systems Boost throughput within minutes | Easy deployment Familiar RJ45 connector is backwards compatible with legacy networks and allows for incremental expansion. Link aggregation Dual 10GbE ports can be combined into a Link Aggregation Group to boost throughput up to 20 Gb/s, while also providing port failover and load balancing functionality. 1 CPU offloading and load balancing Support for CPU offloading and load balancing technologies enables optimal system performance. 5-year warranty At Synology, we are committed to product innovation and quality. Synology guarantees a robust and reliable data management experience with a 5-year limited warranty, providing responsive technical support and hardware replacement services to maximize your return on investment.This 8000MB/s bandwidth adapter is ideal for PCs with PCI Express 3.0 x8 slots, ensuring top level network connectivity for your desktops.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Lenovo ThinkSystem RAID 940‑8i is a high‑performance RAID‑on‑chip adapter for internal drive connectivity. It supports RAID levels 0, 1, 10, 5, 50, 6, and 60 and delivers robust RAS and manageability features for demanding workloads. With PCIe Gen4 and 12 Gb/s SAS, it provides the bandwidth to accelerate databases, virtualization, and content platforms while maintaining data protection. A 4 GB flash‑backed cache helps safeguard data and improve write performance..PCIe Gen4 and 12 Gb/s SAS deliver high throughput..4 GB flash‑backed cache enhances write performance..Enterprise RAS and management features streamline control.

Maximize bandwidth to tackle heavy-duty applications The Synology E10G22-T1-Mini Network Upgrade Module is designed to easily and quickly upgrade your Synology system with 10GbE connectivity. 1 Simple installation, low implementation cost, and support for nearly any network environment makes it the ideal solution for small businesses and home users looking to maximize the performance potential of their deployments. Throughput Expand system capabilities with 10GbE connectivity Flexibility Integrate easily with support for 10/5/2.5/1 Gbps networks. Compatibility Designed for maximum performance and reliability in Synology system.s Simple installation Install the E10G22-T1-Mini through the dedicated and easily-accessible network upgrade slot to instantly add bandwidth availability in Synology servers featuring compact-size enclosures. Multi-gig support Integrate into any RJ-45 network environment with autonegotiation between 10, 5, 2.5, 1 Gbps, and 100 Mbps data rates based on actual network conditions..The PCI Express 3.0 x2 interface provides smooth data transfer and outstanding performance.Add your computer to your home or office network with this single port 10gigabit ethernet card conveniently.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable