X4 PCIe Adapter Cards

Upgrade your server connectivity with the Dell 540-BBGX, a high-performance quad-port Gigabit Ethernet adapter designed for enterprise environments. Featuring a PCI Express 2.0 x4 interface, this adapter delivers reliable, high-speed wired networking with up to 1 Gbps per port, ensuring smooth data transfer and minimal latency for demanding workloads. Ideal for virtualization, high-traffic applications, and multi-network setups, the four RJ-45 ports allow flexible configurations and efficient bandwidth utilization. Built to Dell’s rigorous standards, the 540-BBGX guarantees compatibility with a wide range of Dell PowerEdge servers, making integration seamless and hassle-free. With support for IEEE 802.3 standards and advanced features like load balancing and failover, this adapter enhances network resilience and performance. Its compact design and easy installation make it a practical choice for IT professionals looking to optimize server infrastructure without complexity. Whether you’re expanding your data center or upgrading your existing setup, the Dell 540-BBGX offers enterprise-grade reliability, scalability, and speed..This is a quad-port Gigabit Ethernet network adapter featuring a PCI Express 2.0 x4 interface, designed for high-performance wired connectivity in enterprise servers.The card provides four RJ-45 Gigabit Ethernet ports, allowing multiple network connections from a single adapter.It is fully compatible with a wide range of Dell PowerEdge servers, including models such as R220, R320, R420, R520, R620, R720, R730, R740, and T-series servers like T130, T330, T430, T630, among others.Complies with IEEE 802.3 standards for Gigabit Ethernet and supports 10/100/1000 Mbps data link protocols for versatile network integration

Intel® 4-Port ethernet server adapter has 4 x PCI express 2.1 host interfaces and supports PC as well as server platforms. Adapter includes 4 RJ-45 ports and uses copper as conducting material to resist corrosion..Dimensions: 2.7"H x 5.3"W.For PC.Form factor: Plug-in card.Conductor: Copper.Host interface: PCI Express 2.1 x4.Network technology: 10/100/1000Base-T.Total number of ports: 4.Connectivity technology: Wired.Cabling type: Cat 5 up to 100 m, Bracket height: Low and full-height.Storage over Ethernet: iSCSI, NFS.Speed: 5 GT/s, Slot width: x4 lane.Thermal design power: 5 W.Addresses the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks, and proven, reliable performance.Certifications and standards: ACPI, BSMI, C-Tick, FCC, KCC, UL, VCCI.Intel® 4-Port ethernet server adapter has 10/100/1000Base-T network technology and supports twisted pair media to reduce signal interference.

The StarTech ST1000SPEX43 4-port PCIe Gigabit network adapter card offers 4-channel networking and a maximum throughput of up to 1000 Mbps in each direction. It features the Realtek RTL8111G chipset for reliable network connections to your server or computer. This adapter supports full-duplex flow control, auto negotiation with next-page capacity, up to 9K jumbo frame, IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding, wake-on-LAN and remote wake-up. It is great for many SMB and enterprise applications such as virtualized environments that require multiple NICs..Network adapter card offers simultaneous access to multiple networks for desktop PC clients, servers and workstations.Dimensions: 0.7"H x 4.7"W x 5.4"D.Comes in yellow color.Interface/ports: one PCI express x four male, four RJ-45 female (external).Data transfer rate: 2000 Mbps (full duplex), Jumbo frame support: 9K max.Chipset ID: Realtek RTL8111G, Industry standards: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.Compatibility with Windows 10 (32/64), 8, 8.1, 7, Vista, XP, 2000, ME, 98SE, Windows Server 2012, 2003, Linux Kernel 2.4.x and up operating system.LED indicators: four link and four activity.System and cable requirements: Available PCI Express x4 or higher (x8, x16) slot.Temperature: 0 - 55 deg C (operating), -40 - 70 deg C (storage), Humidity: 5 - 95% RH.Contains one PCIe gigabit network card.Meets CE, FCC and RoHS certifications and standards.Weight: 3.5 oz..Comes with 2 years warranty

Install an SSD into a desktop or server using an available PCI Express 4.0 slot. The pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 NVMe drive to a PCIe slot, avoiding the need for a drive backplane or additional cables. This adapter is not compatible with U.2 drives. The StarTech adapter card is backward compatible with motherboards that feature x4, x8, and/or x16 PCIe 3.0 slots. The U.3 adapter requires no additional drivers or software and works with all workstation and server operating systems, such as Windows, Windows Server, and Linux..To enable ultrafast data access, add a 2.5" U.3 NVMe SSD into a PCIe 4.0 x4/x8/x16 slot in a desktop or server using the included screws.Pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 drive to a PCIe slot, without the need of a drive backplane or additional cables.Supports SFF-TA-1001 drives up to 15mm in height; not compatible with U.2 drives.Works with all workstation and server operating systems such as Windows, Windows Server, and Linux.Vented full-profile bracket and a large cutout in the PCB allow for better airflow and heat dissipation, which helps maintain optimal and reliable performance while reducing potential thermal throttling.Backward compatible with PCIe 3.0 motherboards that have an available x4, x8, or x16 PCIe slot.Box contains: adapter, four drive mounting screws, quick start guide.2-year manufacturer limited warranty

Startech.com® 4 Port quad bus super speed USB 3.0 card adapter increases the efficiency of your device with four dedicated bus channels. Adapter is enhanced with UASP support and includes USB attached SCSI protocol..PCI express x4.Dimensions: 2.2"(H) x 0.6"(W) x 6.6"(L), cable length: 9.8'.Form factor: Plug-in card.Chipset ID: 4 x Renesas/NEC - Micro PD720202, Port style: Integrated on card, No. of ports: 4.Connector type: 1 x PCI express x 4 male, External ports: 4 x USB 3.0 A (9-pin, superspeed) female, Internal ports: 1 x LP4 (4-pin, molex large drive power) female, 1 x SATA power (15-pin) plug.Maximum data transfer rate: 5Gbps/2 ports.OS compatibility: Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), Windows® server 2012, 2008 R2, 2003 (32/64), Linux Kernel 2.6.31 or later.System requirements: Available PCI express x4 or greater slot.Operating temperature: 0 - 50 deg C, Storage temperature: -20 - 60 deg C, humidity: 5 - 85% RH.Optional LP4 or SATA power connector provides up to 900mA per USB port.Backward-compatible with USB 2.0 and USB 1.0/1.1 devices.Hot-swap feature to connect/disconnect devices without powering down the system.UASP support across all four ports.Supports USB battery charging specification 1.2 (Apple mode only).Includes 1 x 4 port PCIe USB card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Certifications & standards: WEEE, RoHS, Green Compliant.Weight: 3.2 oz..Warranty: 2 years limited.first page out in as fast as 55 sec black, 68 sec color.125 GB memory.80 inch color LCD with touchscreen.One-year, next-business day, onsite warranty.USB cable not included.1/Each.Startech.com® 4 Port quad bus super speed USB 3.0 card adapter supports up to 20GBps total transfer bandwidth and delivers up to 900 am of power per port.

Startech.com® 4 Port dual bus super speed USB 3.0 card adapter increases the efficiency of your device with two dedicated bus channels. Adapter is enhanced with UASP support and includes USB attached SCSI protocol..PCI express x4.Dimensions: 2.2"(H) x 0.6"(W) x 6.6"(L), cable length: 9.8'.Form factor: Plug-in card.Chipset ID: 2 x Renesas/NEC - Micro PD720202, Port style: Integrated on card, No. of ports: 4.Connector type: 1 x PCI express x 4 male, External ports: 4 x USB 3.0 A (9-pin, superspeed) female, Internal ports: 1 x LP4 (4-pin, molex large drive power) female, 1 x SATA power (15-pin) plug.Maximum data transfer rate: 5Gbps/2 ports.OS compatibility: Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), Windows® server 2012, 2008 R2, 2003 (32/64), Linux Kernel 2.6.31 or later.System requirements: Available PCI express x4 or greater slot.Operating temperature: 0 - 50 deg C, Storage temperature: -20 - 60 deg C, humidity: 5 - 85% RH.Optional LP4 or SATA power connector provides up to 900 mA per USB port.Backward-compatible with USB 2.0 and USB 1.0/1.1 devices.Hot-swap feature to connect/disconnect devices without powering down the system.UASP support across all four ports.Supports USB battery charging specification 1.2 (Apple mode only).Includes 1 x 4 port PCIe USB card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Certifications & standards: WEEE, RoHS, Green Compliant.Weight: 3.2 oz..Warranty: 2 years limited.Startech.com® 4 Port dual bus super speed USB 3.0 card adapter supports up to 10GBps total transfer bandwidth and delivers up to 900 am of power per port.

Upgrade your server or desktop with the SIIG Dual-Port Gigabit Ethernet PCIe 4-Lane Card, designed for both standard and low-profile chassis. Featuring innovative power management technologies like Energy Efficient Ethernet (EEE) and DMA Coalescing, this card ensures efficient performance and reduced power consumption. Fully compliant with IEEE 802.3 standards, it supports full duplex and Wake-on-LAN for reliable connectivity. Powered by the Intel I350-T2 chipset, it delivers advanced network capabilities and quickly adds two independent Gigabit Ethernet ports via PCI Express..Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support.Intel I350-T2 chipset supports reliable and advanced network connectivity.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems

The StarTech.com PEX4M2E1 x4 PCIe express to M.2 PCIe SSD adapter offers best cost effective solution for ultra fast data access, as well as boost your system speed and performance by adding a PCIe M.2 SSD to your PC. This red adapter is equipped with a full profile bracket and includes a low profile bracket for installation in small form factor computers..Bus type: PCI Express.Compatible drive types (Type and Rate): M.2 (NGFF, M-Key, PCIe x4).Drive installation: Fixed.Drive size: 22 m - M.2 NGFF.Interface: PCI Express.Supported drive height(s): 2242, 2260, 2280, 22110.Drive connectors: 1 x M.2 (NGFF, M-Key, PCIe x4).Host connectors: 1 x PCI Express x4 male.OS compatibility: OS independent.LED indicators: 1 x pin header on board for drive LED connection.Operating temperature: 5 to 50 deg C (41 to 122 deg F), storage temperature -25 to 70 deg C (-13 to 158 deg F).Comes in red color.Max drive height: 4.3".Dimensions: 7.2"H x 4.8"W x 7"L.Weight: 1.6 oz..Comes with 2 year warranty

Get ultra-fast data access by adding an NVMe U.2 SSD to your computer. This U.2 to PCIe adapter lets you add a high-speed, U.2 (4-lane PCIe) 2.5" NVMe SSD, such as the Intel® 750 Series drive, to a PC with an available x4 PCI Express expansion slot. You can mount the PCIe U.2 drive directly onto the adapter, giving you an easy and convenient way to improve your system performance and expand overall internal storage. Boost your system speed and performance The expansion card lets you take full advantage of the fast performance and compact size of PCIe U.2 internal solid-state drives. The adapter connects directly to your computer motherboard to support an NVMe U.2 PCIe-based SSD through ultra-fast x4 PCIe. With the U.2 PCIe-based drive in place, the adapter gives your computer a significant speed boost. Easy to install The expansion card is equipped with a full-profile bracket and doesn't require an adapter cable for installation, this helps to reduce clutter and simplifies system builds. The drive connects directly to the SFF-8639 connector on the adapter, and the adapter connects directly to the computer motherboard. The adapter is compatible with PCIe 3.0 motherboards and is also backward compatible with PCIe 2.0 and PCIe 1.0. The PEX4SFF8639 is backed by a StarTech.com 2-year warranty and free lifetime technical support..Boost system speed and performance by adding a PCIe NVMe U.2 SSD to your PC.Simplify system builds with a U.2 to PCIe adapter that mounts your SSD directly to the adapter, with no need for adapter cables.PCI Express 3.0 x4 lane host adapter.Compatible with x4 PCIe 3.0 motherboards, and backward compatible with PCIe 2.0 and PCIe 1.0.OS independent with no drivers required, for a fast, hassle-free setup

StarTech eight-port SATA III (6Gbps) controller enables you to add eight SATA 6Gbps hard drives (HDDs) or solid State Drives (SSDs) to your computer system or server via an available PCIe x4 card slot. The card supports SATA III and PCI-Express Gen 2 Specifications and four SATA controllers to deliver a high-performance data storage solution..PCI Express SATA expansion adapter card with four host controllers.Maximum data transfer rate is 6Gbps.Card type: standard profile (LP bracket incl.) with eight ports; internal ports: SFF-8087 (36 Pin, Internal Mini-SAS).OS compatibility: Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016, 2019; macOS 10.10 to 12; Linux 2.6.32 and up.2-year manufacturer limited warranty

M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay.REMOVABLE M.2 DRIVE BAY: Use an available PCIe 4.0 x4 expansion slot to install, remove, or swap PCIe M.2 SSDs (NVMe or AHCI); Supports 2230, 2242, 2260, and 2280 M-Key M.2 NVMe SSDs; Capable of reaching high-performance read/write speeds up to 64Gbps.TOOLLESS INSTALLATION: Install an M.2 drive into the drive tray or insert the tray into the drive bay without the need for tools; Power/Activity LED indicator; Drive tray features a latching mechanism and is lockable for secure installation (2 keys incl.).OPTIMAL PERFORMANCE: Vented stainless steel frame, bracket, and tray with thermal pads and aluminum cover aid heat dissipation; Anti-vibration springs on the drive tray reduce shock or vibrations; Optional screw for stability; Incl. Low-profile bracket.COMPATIBILITY: No drivers or software required and works on any operating system including Windows, Windows Server, Linux; Supports PCI Express 4.0 and 3.0 motherboards with an available x4, x8, or x16 slot; Not compatible with M.2 SATA drives.HOT SWAP: Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately, coming soon) offer flexibility/convenience when working with multiple drives; PCIe hot swap support is dependent on the motherboard, check with the manufacturer to confirm support.Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately) provide flexibility and convenience when managing multiple M.2 drives. NVMe PCIe hot swap support is dependent on the motherboard. Verify hot swap support with the manufacturer of the motherboard, and for instructions regarding how to enable this feature..The vented stainless-steel frame and tray with thermal pads aids heat dissipation, ensuring optimal and reliable performance while reducing potential thermal throttling. Anti-vibration springs on the drive tray reduce impact during installation and enhance the overall stability and longevity of the drive. A low-profile bracket is included for small form-factor systems..Install an M.2 drive into the drive tray and insert the tray into the drive bay, without the need for tools. The drive tray features a power/activity LED indicator to monitor drive status. A latching mechanism with optional lock (2 keys included) deters the theft of mission-critical data storage devices..Package Contents:M.2 to PCIe Adapter Card,1 x Low-Profile Bracket,1 x M.2 Drive Tray,1 x Set of Keys,1 x Quick-Start Guide.StarTech.com M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay - Utilize a PCIe x4 expansion slot as a removable drive bay for M.2 SSDs; Supports up to 2280 M-Key M.2 NVMe SSDs; Tool-less installation; Lockable Drive Tray (2 keys incl.); Tray with thermal pads/anti-vibration springs; No drivers/software required

The Intel® X550T2 Ethernet converged network adapter is the most flexible adapter for all your networking requirements. The adapter features an Intel® Ethernet controller with RJ45 copper connector and supports 55 m on Cat6, 55/100 m on Cat6A cabling. The adapter has dual port PCIe 3.0 slot for external connectivity..Ethernet converged network adapter is perfect for today's server platforms.Interfaces/ports: 2 x RJ-45 copper.Cable: 55 m on cat6, 55 / 100 m on cat6a.Bus type: PCI express 3.0 (8 GT/s), bus width: x4 lane PCIe, operable in x8 and x16 slots.Form factor: Plug-in card.Network virtualization: VXLAN.Interrupt levels: INTA, MSI, MSI-X.Network technology: 10GBase-T.Low cost, low power 10 GbE performance for the entire datacenter, enables higher bandwidth.Lower processor usage, increased throughput.Includes network adapter, low-profile bracket, full-height bracket.RoHS compliant.Comes with limited lifetime warranty

StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.

The Broadcom NetXtreme Gigabit Ethernet Adapters are a family of high performance PCIe and OCP adapters. The adapters are available with either two ports or four ports and are supported on ThinkSystem and System x servers. Did you know? The NetXtreme Quad Port Ethernet Adapter is an ideal way to implement a virtualization solution using your existing Gigabit Ethernet network. With four copper-based Gigabit ports on a single PCI Express 2.0 x4 interface, the adapter provides the density and capacity you need to support large numbers of virtualized systems on one server..This 2000MB/s bandwidth adapter is ideal for PCs with PCI Express 2.0 x4 slots, ensuring top level network connectivity for your desktops.With quad ports on a single card, save valuable expansion slots on your system for other purposes.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable

This is a Gigabit Ethernet PCIe 2.0 x4 network interface card with dual RJ-45 ports that comply with IEEE 802.3 standards. It is based on an Intel I350 chipset and is compatible with a variety of different applications and operating systems, including Windows, Linux and Unix-like systems. Providing 10/100/1000Mbs of network speed, it fully supports high-end servers and various other networking applications. In addition, this card supports high level VLAN filtering. The dual RJ-45 ports operate over copper patch cable, allowing for an operating distance of 100m. This product includes both half-height and full-height brackets. Our network interface cards are 100% compliant, and offer a cost effective solution for all of your network upgrade needs. With our certification test program, we guarantee your product will work right the first time..Enjoy superfast data transfer of up to 2000 MB/s with PCI Express 2.0 x4 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable

The QNAP QM2-2P-344A adapter adds M.2 NVMe SSD slots to your NAS via PCIe Gen3 x4 interface, delivering up to 32 Gb/s transfer speeds. It supports SSD caching and Qtier auto-tiering for optimized performance. Tool-less design simplifies installation, while cooling and monitoring features ensure stability..PCIe Gen3 x4 interface provides up to 32 Gb/s speeds..Supports Qtier technology for efficient storage tiering..Tool-less design enables quick, easy installation.

Axiom's 10GbE Copper Network Adapters are the latest generation of high-performance PCIe 3.0 x4 Lane 10 Gigabit NIC Cards, based on the Intel X550AT controller. The server adapter simplifies migration to 10 Gigabit Ethernet (GbE), Provides iSCSI FCoE Virtualization and Flexible Port Partitioning (FPP). Key Features Low cost, low power, 10GbE performance for the entire datacenter. New generation single- and dual-port 1OGBASE-T controller with integrated MAC and PHY Standard CAT6a cabling with RJ45 connectors. Supports NBASE-T technology (2.5 and 5.0 GbE over CAT 5e) Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10GbE. PCI Express - (PCIe) v3.0 with up to 8.0 GT/s Unified networking delivering LAN iSCSI and FCoE in one low-cost CNA. Flexible 1/0 virtualization for port partitioning and Quality of Service (QoS) of up to 64 virtual ports Reliable, proven 10GbE technology from Intel Corporation. Includes Full Height and Half Height Mounting Brackets.PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable