PCIe Ethernet Cards

This card features MDI/MDIX automatic configuration which helps to simplify installation and configuration. Adapter card provides full and half duplex support for connected devices..Network adapter interface: RJ45.Network adapter speed: 100 Mbps.Compatible networks: 10/100 Mbps.Number of ports: 1.Bus type: PCI express.Card type: Standard profile (LP bracket included).Chipset ID: Realtek - RTL8101E.OS compatibility: Windows 2000/ XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8(32/64-bit), Linux.Connector type: 1 x PCI express x1 male.External ports: 1 x RJ-45 female.Dimensions: 0.8"(H) x 4.7"(W) x 3.6"(D).LED indicators: 1 x link status.Certificates and standards: CE, FCC, RoHs.Includes: 1 x 10/100 PCI-Express Ethernet Card, 1 x Low Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Weight: 1.6 oz..Warranty: Lifetime limited

Intel® 4-Port ethernet server adapter has 4 x PCI express 2.1 host interfaces and supports PC as well as server platforms. Adapter includes 4 RJ-45 ports and uses copper as conducting material to resist corrosion..Dimensions: 2.7"H x 5.3"W.For PC.Form factor: Plug-in card.Conductor: Copper.Host interface: PCI Express 2.1 x4.Network technology: 10/100/1000Base-T.Total number of ports: 4.Connectivity technology: Wired.Cabling type: Cat 5 up to 100 m, Bracket height: Low and full-height.Storage over Ethernet: iSCSI, NFS.Speed: 5 GT/s, Slot width: x4 lane.Thermal design power: 5 W.Addresses the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks, and proven, reliable performance.Certifications and standards: ACPI, BSMI, C-Tick, FCC, KCC, UL, VCCI.Intel® 4-Port ethernet server adapter has 10/100/1000Base-T network technology and supports twisted pair media to reduce signal interference.

Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty

Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer.Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.Dual-port Gigabit Ethernet, PoE support

This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.This 250 MB/s bandwidth PCI Express adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable.Up to 8 DECT cordless handsets

The StarTech ST1000SPEX43 4-port PCIe Gigabit network adapter card offers 4-channel networking and a maximum throughput of up to 1000 Mbps in each direction. It features the Realtek RTL8111G chipset for reliable network connections to your server or computer. This adapter supports full-duplex flow control, auto negotiation with next-page capacity, up to 9K jumbo frame, IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding, wake-on-LAN and remote wake-up. It is great for many SMB and enterprise applications such as virtualized environments that require multiple NICs..Network adapter card offers simultaneous access to multiple networks for desktop PC clients, servers and workstations.Dimensions: 0.7"H x 4.7"W x 5.4"D.Comes in yellow color.Interface/ports: one PCI express x four male, four RJ-45 female (external).Data transfer rate: 2000 Mbps (full duplex), Jumbo frame support: 9K max.Chipset ID: Realtek RTL8111G, Industry standards: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.Compatibility with Windows 10 (32/64), 8, 8.1, 7, Vista, XP, 2000, ME, 98SE, Windows Server 2012, 2003, Linux Kernel 2.4.x and up operating system.LED indicators: four link and four activity.System and cable requirements: Available PCI Express x4 or higher (x8, x16) slot.Temperature: 0 - 55 deg C (operating), -40 - 70 deg C (storage), Humidity: 5 - 95% RH.Contains one PCIe gigabit network card.Meets CE, FCC and RoHS certifications and standards.Weight: 3.5 oz..Comes with 2 years warranty

The AT-2911 Series Gigabit Ethernet Network Adapters are integrated Ethernet network interface cards based on Broadcom's BCM5718 chipset with a PCI Express (PCIe) x1 version 2 interface. The AT-2911 series adapter connects a PCIe compliant computer to a Gigabit Ethernet network. Allied Telesis offers models equipped with a single port interface or dual port interface in the AT-2911 series. The AT-2911 adapter is equipped with single or dual fiber optic connector, copper connector, SFP slot, or a combination of these connectors..This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.Enjoy superfast data transfer of up to 250 MB/s with PCI Express x1 card, between the network card and motherboards.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable

Allied Telesis™ 1 Port fast ethernet fiber network interface card supports 100Base-FX network technology with plug-in card form factor. Card gives you the maximum possible bandwidth and bus efficiency with capability and low power consumption..Network adapter interface: PCI Express x1.Network adapter speed: 100 Mbps.Provides fast networking connectivity even when other cards are installed in your computer.Ports: 1 x ST.Network technology: 100Base-FX.Form factor: Plug-in card.Connectivity technology: Wired.Media type supported: 50/125 Microm and 62.5/125 Microm fiber-optic cable.Dimensions: 2.7"(H) x 4.8"(D).Operating distance: Up to 2000 m in full-duplex, up to 412 m in half-duplex.Power: 3.3V, 2 W power consumption.Umbo frame up to 9.6 KB.Operating system: Novell NetWare 6.x, Linux 2.4, Microsoft Windows Server 2003, Linux 2.6, Microsoft Windows 2000/XP/Vista/7, Microsoft Windows Server 2008.Operating temperature: 32 - 122 deg F, Humidity: 5 - 90% (non-condensing).Certifications and standards: FCC-Class B certified, UL, TUV, VCCI, C-Tick, EN55024, EN55022 Class B, RoHS.Weight: 1.92 oz..Allied Telesis™ 1 Port fast ethernet fiber network interface card has PCI express x 1 host interface and supports 50/125 Microm and 62.5/125 Microm fiber optic cable.

StarTech.com® PCI Express gigabit ethernet fiber network card has a dual profile design and includes low profile/half height bracket for easy installation. Card is compatible with Windows 8, 8.1, 7, Vista, XP, Mac OS 10.5, Linux 2.6.x and 3.5.0 OS..1x PCI express x1, 1x SFP slot female.4.6"(H) x 0.7"(W) x 5"(D).Windows 8/8.1 (32/64bit)/7 (32/64)/Vista (32/64)/XP (32/64), Windows Server 2012/2008 R2/2003, Mac OS 10.5 and up (Tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V operating systems.Wired.Data transfer rate: 2 Gbps (full-duplex).Form factor: Plug-in card.Buffer size: 48KB.Power consumption: 3.2 W max.Chipset ID: Realtek RTL8168E, Marvell 88E1111B.LED indicators: Link (green), activity (yellow).Temperature: 0 - 45 deg C operating, -20 - 70 deg C storage, Humidity: 5 - 95% RH (non-condensing).Applications: Ideal for secure setups, perfect for remote embedded industrial monitoring systems, and high-speed video surveillance.Compatible with most Gigabit SFP modules.Supports full/half-duplex auto-negotiation, auto-MDI/MDIX.No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.Includes 1 Port PCI Express Gigabit SFP network card, low-profile bracket, driver CD, instruction manual.Certification and standards: CE, FCC, RoHS.Weight: 2 oz..Warranty: 2 years limited.StarTech.com® PCI Express gigabit ethernet fiber network card supports maximum data transfer rate of 2 Gb/s at full duplex mode and has a SFP female slot to ensure flexible network configuration.

Increase your bandwidth up to 10 Gbps with this StarTech SFP+ card for enhanced data transfer rate using fiber optic cable. Reduce wait times for large file transfers, content sharing, network storage, or any other high bandwidth application. This PCIe network card has an open SFP+ slot that can accept any MSA-compliant module or direct attach cable (DAC). It is compatible with multimode, single-mode, and copper SFP+ modules. This card is natively supported in Windows 11. For security and privacy reasons a fiber network card is the ideal point-to-point network adapter. Eliminate EMI with a fiber connection and cover longer distances with fiber to host..Network controller to add a 10GbE SFP+ module to a PCI Express (PCIe) 3.0 x 4 slot in your workstation.Provides Ethernet speeds up to 10Gbps.Has one SFP+ slot.Compatible with both MSA-compliant and branded 10GB SFP+ modules.Meets or exceeds the RpHS and WEEE standards.An open SFP+ slot to make changes as needed just by swapping the module in use, whether it is fiber, copper, or direct attach cables (DAC).9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network managemen.Full-profile bracket are installed by default, with a low-profile bracket included.2-year manufacturer limited warranty

This quad-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across four 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to four 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a four RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

The StarTech ST1000SPEXI gigabit Ethernet network card features gigabit Ethernet PCI Express x4 interface card with single RJ-45 port. The RJ-45 port is fully compatible with IEEE 802.3/U/AB standards and offers maximum throughput up to 1000 Mbps auto-negotiation. Advanced features such as jumbo frames, wake-on LAN, auto MDIX and VLAN tagging for optimizing network traffic. Network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich gigabit networking..Gigabit Ethernet network card is suitable for use with PC.Powerline adapter speed: 2000 Mbps.Features 10/100/1000base-T RJ-45 connector.Dimensions: 0.7"H x 2.6"W x 4.7"L.Power consumption: 0.8 W.Meets RoHS, Green compliant certification and standards.PCI Express host interface is for better performance.Form factor: Plug-in card.Supports twisted pair for transmission of both analog and digital signals.Intel I210-AT chipset allows interface card to be compatible with different operating systems.Includes 1-port network card, low profile bracket and instruction manual.Weight: 1.2 oz..Comes with 2 years warranty.The StarTech 2000 Mbps gigabit Ethernet network card is based on Intel I210-AT chipset, that makes it compatible with Windows and Linux operating systems.

This dual-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across two 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to two 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a two RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.

Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

The StarTech ST4000SPEXI 2000 Mbps Gigabit Ethernet network card is compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS. It supports twisted pair cable, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames up to 9K. This network card installs easily into a broad range of computer/server chassis, regardless of form factor..Network card helps to add more network ports to a workstation or server for redundancy or virtualization.Offers 20000 Mbps speed for fast, high-bandwidth connectivity.Supports four PCI Express x4 and four RJ-45 ports for good connectivity.Dimensions: 4.7"H x 0.7"W x 5.2"L.Installs easily into a broad range of computer/server chassis, regardless of form factor.Power: 4.4 W.Meets RoHS, FCC, CE compliant certification or standards.Form factor: Plug-in card.Supports twisted pair media type, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames upto 9K.Compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS.LED indicators: 4 x 100/1000 Mbps, 4 x link/activity, Network technology: 10/100/1000Base-T.Environmental conditions: 41 - 122 deg F operating temperature, -4 - 140 deg F storage temperature, 20 - 80% RH humidity.Offers PXE network boot, auto MDIX and negotiation support, wake-on-LAN support, full or low-profile installation and full duplex support.Includes low-profile bracket and instruction manual.Weight: 3.4 oz..Comes with 2 years warranty.The StarTech 2000 Mbps Gigabit Ethernet network card adds more network ports to a workstation or server for redundancy or virtualization.

Arm Your PC with the Latest 10G Speeds PCIe 3.0 Slot to 10 Gigabit Ethernet Network Adapter TX401 Upgrade to 10G Networking 10 Gigabit Ethernet reaches blazing-fast data rates up to 10 billion bits per second—10× faster than standard Gigabit Ethernet. It's a brand-new era for all your bandwidth-intensive tasks from local data transfers to internet access. 10 Gbps Internet Access Make Full Use of Your High-Speed Internet Access 10 Gbps NAS Connection Lightning-Fast Local Data Transmissions 10 Gbps Host Server Building High Hardware Configuration for a Powerful Server Play Never Ends with 10G With 10 Gbps internet access, your gaming will be fully optimized with a large boost in speed, latency, and responsiveness. Large-sized game downloads, seamless live streaming, and massive data backups via the cloud are as easy as choosing your character..Features a PCI Express interface and supports 10 Gigabit Ethernet speeds for high-performance networking..has a maximum data transfer rate of 10,000 Mbps..Equipped with 1 Ethernet LAN (RJ-45) port for network connectivity..compatible with a variety of products and systems, including: Operating Systems: Windows 11, 10, 8.1, 8, 7, Windows Server 2022, 2019, 2016, 2012 R2, and Linux.Certified by : Restriction of Hazardous Substances (RoHS).Comes with a 2 Year Limited warranty.

10GBase-T PCIe Network Adapter with backward compatibility of 5/2.5/1G and 100Mbps; RJ45 port and built-in QoS Hyper-fast 10Gbps Networking - Enjoy up to 10X-faster data-transfer speeds for bandwidth-demanding tasks. Complete Compatibility - XG-C100C is compatible with current network standards, including 10/5/2.5/1Gbps and 100Mbps, for seamless backward compatibility. Compatible with Windows and Linux - Supports Windows 10 and Linux Kernel 4.4 for flexible OS integration. RJ45 Port for Easy Migration - Easily upgrade to 10Gbps networking using standard copper network cables. Prioritize Your Games - Built-in Quality-of-Service (QoS) technology lets you prioritize bandwidth and supported gaming packets for a smooth gaming experience..10Gigabit Ethernet card offers the flexibility and scalability to make infrastructure run as efficiently and productively as possible with 10Gigabit data transfer rate.Enjoy superfast data transfer of up to 2000 MB/s with PCI Express x4 card, between the network card and motherboards.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Intel Ethernet Network Adapter I226-T1 is ideally suited for personal computers and workstations used for enterprise, gaming, and home networks. These systems require more bandwidth than ever before. This ultra-compact, easy-to-integrate PCIe 3.1 x1 adapter, is a cost-effective networking solution for speeds up to 2.5GbE. The I226-T1 is also designed with a ventilated bracket, for increased efficiency and reduced power consumption..Ethernet Network Adapter.Maximum Data Transfer Rate: 2.50 Gbit/s.Network Technology: 2.5GBase-T.Form Factor: Plug-in Card.Bracket Height: Low Profile and Full Height.Device Supported: Computer/Workstation.Chipset Model: I226-LM.Host Interface: PCI Express 3.1 x1.Number of Network (RJ-45) Ports: 1

StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

With Gen10 Plus ProLiant Servers, HPE offers the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers. With Gen11 ProLiant Servers, HPE continues to offer industry-leading security and builds on Gen10 Plus features by adding support for SPDM security on select ethernet adapters..Ethernet adapter for Gen10 Plus ProLiant Servers.Provides data transfer rates up to 10Gbps.Contains two SFP+ ports.Features stand up profile with PCIe 3.0 x8.Power requirement: typical: 7.9 W; max: 9.1 W

StarTech.com® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: Windows® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 Windows® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.com® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.

Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems

StarTech.com® Gigabit network server adapter NIC card features PCI Express x1 interface and offers network speed of up to 1000 Mbps. Card with link/activity LED indicators supports jumbo frames, wake-on-LAN and auto MDIx features..1 x Network.Twisted Pair.Full-height, Low-profile.Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards.Processor: 1 x RTL8111E - Realtek semiconductor.Platform supported: PC, Mac.Server adapter offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.Includes both full profile and low profile/half-height installation brackets for installation in a wide range of computer/server chassis, regardless of form factor.Connectivity technology: Wired.Operating systems: Windows 2000/ XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit)Mac OS X (Intel based, tested up to 10.8), Linux.Operating humidity: 10 percent ... to 90 percent ... RH.Operating Temperature: 0 to 70 deg C.Supported protocols: CSMA/CD.Network technology: 10/100/1000Base-T.Form factor: Plug-in card.Green compliance: RoHs.Dimensions: 2.7"(H) x 4.7"(W) x 0.7"(D); Weight: 1.4 oz..Warranty: 2 years limited.Startech.Com® ST1000SPEX2 Gigabit Network Server Adapter NIC Card offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.

Intel® X710-DA4 8.0 GT/s Ethernet Converged Network Adapter, Retail Unit.Device Type: Network adapter.Form Factor: Plug-in card.Interface Type: PCI Express 30 x8.Ports: 10 Gigabit SFP+ x 4.Dimensions (WxDxH): 66 in x 44 in.Data Link Protocol: 10 GigE.Data Transfer Rate: 10 Gbps.Network / Transport Protocol: TCP/IP, UDP/IP, iSCSI.Compliant Standards: IEEE 8023, IEEE 8021Q, IEEE 8021p, IEEE 8023ad (LACP), IEEE 8021as, IEEE 8021Qbg.Manufacturer Warranty: Limited lifetime warranty.Ethernet converged network adapter is perfect for Ethernet applications.Adapter speed: 8.0 GT/s.Number of ports: Quad, System interface type: PCIe v3.0.Cable medium: Copper.Cabling type: SFP+ direct attached twin axial cabling up to 10 m.Bracket height: Full height.Ethernet controller: Intel® Ethernet Controller XL710-AM1.Features Intel virtualization technology, Intel Ethernet power management, Intel data direct I/O technology, Intelligent offloads, On-chip QoS.System Requirements: Microsoft Windows Server 2008 R2, Microsoft Windows Server 2008, Linux Kernel 2632, Microsoft Windows Server 2012, FreeBSD 9, Microsoft Windows Server 2008 R2 (64-bits), VMware ESXi 51, Microsoft Windows Server 2012 x64 Edition, Micro

The StarTech.com® ST10000SPEXI 1-Port 10G Ethernet network card utilizes the Intel® X550-AT chipset to provide power, performance and enhanced capabilities that is required for dependable network connections. It lets you to add a 10G/5G/2.5G/1G/100Mbps R-J45 Ethernet port to provide network connectivity for high bandwidth workstations and servers. The Intel X550-AT chipset provides advanced features including Intel® Virtualization technology for connectivity and PXE network boot support. It has dual-profile design that allows easy installation into a wide range of computer/server chassis, regardless of form factor..Ethernet network card offers flexible configuration and secure networking to users in a standards-based environment.Dimensions: 4.8"H x 2.7"W x 6"L, Cable length: 3.9".Color: Black.Connectors: One PCI Express x4 male, one RJ-45 female.Data transfer rate: 10 Gbps.Bus type: PCI Express, Card type: Standard Profile (LP bracket incl.).Chipset ID: Intel X550AT.Industry standards: IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100Base-T), NBASE-T (Linux only), PCI Express Rev 2.0.Compatible networks: 10 Gbps/5G/2.5G/1G/100 Mbps.Supported protocols: IEEE 802.3x (Flow Control Support), IEEE 802.1Q (VLAN tagging).LED indicators: One Link/activity, one 10G/1G speed.OS compatibility: Windows 7, 8, 8.1, 10 (64-bit only), Windows Server 2008 R2, 2012, 2012 R2 (64-bit only), 2016, Linux 2.4.x/2.6x/3.x LTS Versions.Includes: One 10G network card, one low-profile bracket, one quick-start guide.Weight: 3.4 oz..Comes with 2 years warranty

Startech Gigabit Ethernet card includes a standard profile bracket for installation in a wide range of computer/server chassis, regardless of form factor. Card adds a 10/100/1000 Mbps which is compatible with RJ45 Ethernet port..Network adapter interface: RJ45, 1 x AC power plug.Network adapter speed: 1000 Mbps.Compatible networks: 10/100/1000 Mbps.Card type: Low profile, Chipset ID: Realtek RTL8111E, Auto MDIX, full duplex support, Supported protocols: CSMA/CD.Connector type: 1 x PCI Express x1, Bus type: PCI Express, External ports: 1 x RJ-45.Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging.Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab.Saves the time of having to adjust the mounting bracket, with a pre-configured half-height/low-profile bracket.LED indicators: 1 x Gigabit Detect (Yellow), 1 x Link/Activity (Green).Versatile Gigabit NIC/Server Adapter offers effective network performance.Environmental: Humidity 10% approx. 90% RH, Operating temperature: 0 to 70 deg C (32 to 158 deg F), Storage temperature: 0 to 100 deg C (32 to 212 deg F).System and cable requirements: Available PCI Express expansion card slot.OS Compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server 2008 R2, 2003(32/64), Mac OS X (Intel based, tested up to 10.8), Linux, Physical Characteristics.Includes 1 x Gigabit Ethernet PCI Express Card, 1 x Standard Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC.Warranty: 2 years limited.Startech Gigabit Ethernet card comes pre-configured with a low-profile/half-height installation bracket and has thickness of 700 mil.

1-Port 2.5GbE M.2 2280 Network Card, Multi-Gigabit Speeds (2.5G/1G/100M/10M), NBASE-T (802.3bz) NIC, M.2 B+M Key, PCIe Ethernet Interface, For SFF/Desktop PCs.High-performance M.2 Ethernet 2.5Gbps network card with Intel I225-V-chip; Multi-gigabit; Leverage existing Cat5e/Cat6 cabling (or better); NBASE-T (802.3bz); PCI Express M2 2280 B or M key compatible.M.2 2280 form factor is ideal for upgrading systems that do not have PCIe expansion slots or where slots are already in use; Includes 2ft (60cm) M/F Cat6 cable adapter for running Ethernet port to full/low-profile bracket on the rear of the PC.2.5GBASE-T variable speed options (2.5/1Gbps and 100/10Mbps) with auto-negotiation; Supports B or M key M.2 PCIe Gen 2 slots; Network interface card for PC is compatible with Windows/VMware/Linux; Full and low profile bracket included.Intel vPro® for remote management and troubleshooting; PXE boot enabled for faster deployment/updates; 9K jumbo frame for reduced packet overhead; Remotely boot a system using WoL; VLAN support for efficient network management.Designed and built for IT Professionals, this 2.5 GbE M.2 NIC is backed for two years, including free lifetime 24/5 multi-lingual technical assistance.This Ethernet card supports the following advanced features: PXE Boot, Wake-on-Lan (WoL), VLAN tagging, 9K jumbo frame, half-duplex, auto-negotiation, and Error Correcting Memory (ECC) for optimal network functionality..This 2.5 GbE M.2 Network Interface Card (NIC) features an Intel I225-V chipset with Intel vPro® technology, for enhanced performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support of new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding 2.5GBASE-T (802.3bz) compatibility for seamless integration.

Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems

Are you looking for a simple way to migrate to 10G high performance data center with low cost and low power in your data center? The HPE Ethernet 10Gb 2-port 562 Adapters deliver high performance and low latency for Ethernet traffic to and from the server with minimal CPU resources required. Processing of I/O packets on the adapter frees up CPU to do other more important tasks. For environments such as Telco/NFV, high-performance computing (HPC) and ecommerce that deal with large volumes of small packet traffic, these adapters accelerate small packet processing by bypassing processing in the host O/S kernel. Features: Improve Application Performance: HPE Ethernet 10Gb 2-port 562 Adapters offload packet processing to reduce CPU utilization with tunnel offloads (VXLAN and NVGRE). Now you can distribute network traffic across CPU cores in your data center. Speeds up packet processing to service more I/O requests utilizing data plane development packet (DPDK). Increase I/O Bandwidth for Workload Intensive Applications: HPE Ethernet 10Gb 2-port 562 Adapters deliver single root I/O virtualization (SR-IOV) which increases virtual network performance while decreasing CPU utilization. Provides a seamless performance upgrade from 1GBASE-T to 10GBASE-T with backward compatibility..10Gigabit Ethernet card offers the flexibility and scalability to make infrastructure run as efficiently and productively as possible with 10Gigabit data transfer rate.PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

This 4-port RJ45 1Gbps OCP 3.0 Network Interface Card (NIC) features an Intel® i350-AM4 Ethernet Controller, enhancing performance and data integrity. The Ethernet card adheres to OCP 3.0 standards and ensures broad compatibility, making it an ideal solution for reliable network connectivity and robust data transfer capabilities. Optimized Network Efficiency Leverage existing Cat5e/Cat6 cabling (or better) up to 100m to maximize existing networks and equipment. The NIC supports variable speed options (10/100/1000 Mbps) with auto-negotiation and 9K jumbo frames to reduce packet overhead, reducing network slowdowns..4-Port RJ45 Gigabit OCP 3.0 Server Network Card, 1 Gbps.Maximum Data Transfer Rate 1Gbps.Number of ports 4.OS Compatibility Windows Server 2012, 2012 R2, 2016, 2019, 2022, 11, 10 VMware ESXi 7.x Linux 2.4.x and up - LTS Versions only.Chipset Model I350-AM4.Media Type Supported Twisted Pair.Form Factor: Plug-in Card.Limited Warranty 2 Year

Do you want to increase bandwidth and reduce network vulnerability while reducing costs? The HPE Ethernet 10/25Gb 2-port 631 Adapters deliver the capability to drive either 10G (SFP+) or 25G (SFP28) speeds, providing the option for a large jump in Ethernet performance. Compared to a 10G implementation these adapters offer cost reductions by lowering the number of servers, adapters, cables and switches while accelerating server performance and targeted workloads. These adapters help prevent, detect and recover from cyberattacks by protecting applications, data and server infrastructure by authenticating digitally signed firmware via a Root of Trust architecture. In addition, they offer Secure Boot, Device-level Firewall and other advanced security features. Features: Safeguard Your Data and Your Business Network: The HPE Ethernet 10/25Gb 2-port 631 Adapter blocks installation of rogue or corrupted firmware and verifies that the executing firmware is trusted via Hardware Root of Trust and Authentication. Stops unmanaged access to memory or storage with Device - level Firewall. This validates that on-device firmware and configuration data can only be accessed by authorized agents. Provides traceability into authenticated firmware updates by capturing changes in standard system logs. Boosting I/O Bandwidth with Lower Latency: The HPE Ethernet 10/25Gb 2-port 631 Adapter delivers single root I/O virtualization (SR-IOV) with the ability to run a large number of virtual machines (VMs) per server, which reduces the need for hardware and the resultant costs of space and power required by hardware devices. Reduces CPU Utilization and helps improve host VM density and server efficiency using remote direct memory access (RDMA) over Converged Ethernet (RoCE v2) for Live Migration, Microsoft SMB Direct environments. Realize Breakthrough Economics: The HPE Ethernet 10/25Gb 2-port 631 Adapter offloads packet processing to reduce CPU utilization and lower power with Tunnel Offloads (VXLAN and NVGRE). Speeds packet processing to service more I/O requests utilizing data plane development packet (DPDK)..This 25Gigabit Ethernet card will surely cater to the bandwidth requirements of the next-gen cloud and Web-scale environments.This 8000 MB/s bandwidth PCI Express 3.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.With the 20GBase-X technology get up to 20Gbps data transfer rate over the supported network cable

HPE Ethernet 10Gb 2-port 535FLR-T Adapter (817721-B21).This 8000MB/s bandwidth adapter is ideal for PCs with PCI Express 3.0 x8 slots, ensuring top level network connectivity for your desktops.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.With the 10Base-T technology get up to 10Mbps data transfer rate over the twisted pair cable

StarTech.com® PEXUSB3S11 Express card features USB 3.0 connection that provides benefit of compatibility with USB 3.0-based internal storage solutions. Transfers data at the rate of up to 5 Gb/s. Enable high speed USB communication between your PC and any USB 3.0 enabled external device. Offers reliable, fast, hot-swappable, connectivity solution for backups and data archiving for desktop and server. PCIE USB 3.0 card includes an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port. The 2 port card operates at a temperature of 0 DegC to 50 DegC and stores at temperature of -20 DegC to 60 DegC. Works with UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously..USB PCI express card offers high performance.Measures 0.8" x 4.7" x 2.8".Has USB 3.0 connection for added convenience.Compatible with Windows® 8 (32/64bit)/7 (32/34)/Vista (32/64)/XP (32/64), Server 2008 R2, 2003.Features PCI express Bus type and standard profile card type for reliable operation.1 x PCI express male, 1 x USB 3.0 A (9 pin, superspeed) female (external) connection and 1 x SATA power (15 pin) plug for reliable operation.Backward compatible with previous USB standards, USB ports are hot swapping and plug-and-play compliant.Optional SATA power connector for up to 900 mA per port output.Supports Control/bulk/interrupt/isochronous transfer USB communication types.Plug-in card form factor for convenience.Operates at 32 -122 deg F temperature.Meets Green Compliant, RoHS, CE, FCC certification and standards.Contains 1 x PCI express USB 3.0 card, 1 x low profile bracket, 1 x driver CD and 1 x instruction manual.Weighs 1.4 oz.Comes with lifetime limited warranty.StarTech.com® Express card offers both internal and external USB 3.0 connections. Compatible with Windows 8 and Windows 7 OS.

Startech.com® USB adapter adds 3 external and 1 internal USB 2. Slot and is supported for high speed USB 2. Data transfer rates of 480 Mbps. Adapter is designed for versatility and performance..Host interface: PCI express.Form factor: plug-in card.Dimensions : 3.5inch(L) x 3.1inch(W) x 0.8inch(H).Warranty: 2 year limited.Startech.com® USB adapter has a low profile 4 port USB card offers versatility, performance and provides expansion for connections.