Power Supply for Network Switches

The HP® Aruba 2930F 24-port PoE+ fixed port managed Gigabit Ethernet switch provides high-performance and resiliency for a digital workplace campus network. A powerful Aruba ProVision ASIC delivers performance and value, supporting the latest SDN applications with future proof programmability, as well as it supports 10GbE uplinks, PoE+, robust QoS and RIP routing. The switch provides better application experience with low latency and virtualization. The switch provides you an unmatched quality of service with trusted security that meets corporate policies and compliance requirements. The switch supports Aruba ClearPass policy manager for unified and consistent policy between wired and wireless users with simplified implementation and management for guest login, network access and other network policies..Fixed port managed gigabit Ethernet switch provides a reliable infrastructure for your business network.Dimensions: 4.39 cmH x 44.25 cmW x 30.42 cmD.Compatible with PC.Comes in black color.Memory: 1GB DDR3 SDRAM, buffer memory: 12.38MB 4.5MB Ingress/7.785 Egress, 4GB eMMC, processor: Dual Core ARM Coretex A9 at 1016 MHz.Interfaces/ports: 24 x RJ-45 autosensing 10/100/1000 PoE+ ports, 4 x SFP.Media type supported: Twisted pair, optic fiber, network technology: 10/100/1000Base-T, 1000Base-X.Layer supported: 3.Ethernet technology: Gigabit Ethernet.MAC address table: 32K entries.Throughput: Up to 41.7 Mpps, routing/switching capacity: 56 Gbps.Latency: 1000 Mbps latency: < 3.8 us.Management: Aruba AirWave network management, IMC - Intelligent Management Center, command-line interface, web browser, configuration menu.Power: 120 - 230 VAC 50/60 Hz redundant power supply, PoE capability: 370 W PoE+.Form factor: 1U rack-mountable, Desktop.Includes Aruba 2930F 24G PoE+ 4SFP switch, 1 x power cord, 1 x screw kit, 4 x mounting ears, 4 x bumper feet, 1 x cable tie.Meets FCC part 15 Class A, VCCI Class A, EN 55022 Class A, CISPR 22 Class A, EN 55024, EN 61000-3-2 2000, 61000-3-3, ICES-003 Class A, RoHS standards.Weight: 3.9 kg.Comes with limited lifetime warranty

600W config 5 power supply for Catalyst 9200 switch series.Autoranging unit supports input voltages between 100 and 240 VAC.Output voltage range is 12 to 12.5V

Startech.com® Gigabit Ethernet fiber media converter card module is designed for applications where multiple chassis-powered media converters are required. Module ensures maximum up-time with link-loss forwarding and remote status monitoring..Cisco Nexus 2000 series fabric extender.Input voltage type: AC, Input voltage range: 90 - 264 VAC, Output power: 400 W, Frequency required: 50 - 60 Hz.Form factor: Plug-in module.Power supply connect directly to the system through connectors attached to the baseboard through cables.One connector is on the baseboard for each power supply.AC input is through an IEC connector mounted on the power supply front panel.Certifications and standards: RoHs.Weight: 2.2 lbs..Environmental: Humidity - 10 - 90% RH (non-condensing), Operating temperature - 0 - 60 deg C, Storage temperature - -10 - 70 deg C.Form factor: Internal.Media type supported: Twisted pair.Includes 1 x fiber media converter, 1 x instruction manual.Certifications and standards: IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, CE, FCC.Weight: 6.5 oz..Warranty: 2 years.Cisco™ AC power supply is compatible with Cisco™ nexus 2000 series fabric extender and outputs 400 W of power and has frequency ranging from 50 Hz - 60 Hz.

The HP® J9830B#ABA silver power module is suitable for use with Aruba 5406R, 5406R 16, 5406R 44, 5406R 8-Port, 5406R zl2, 5412R, 5412R 92 and 5412R zl2 switch. This plug-in power module provides output power of 2750 W for reliable operation and performance..Power module offers power to power/semiconductor devices.Compatible with Aruba 5406R, 5406R 16, 5406R 44, 5406R 8-port, 5406R zl2, 5412R, 5412R 92, 5412R zl2 switch.Color: Silver.Power: 2750 W.Form factor: Plug in module.2750 W power module compatible with Aruba 5406R, 5406R 16, 5406R 44, 5406R 8-port, 5406R zl2, 5412R, 5412R 92, 5412R zl2 switches.

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Number of Ethernet Ports 16, Network Management Type Managed.Network Technology: 10/100/1000Base-T.Ethernet Technology: Gigabit Ethernet.Switch Form Factor: Rack-mountable, Desktop.Wireless Connectivity: Not Applicable.Power Source: Power Supply.Media Type Supported: Twisted Pair.Limited Lifetime Warranty

Aruba X372 features a 1600 watt power supply for applicable PoE switches. Offers up to 1440 watts of PoE power, and is keyed so that it will not fit into the power supply slots of non-PoE Aruba switches..Switch power supply unit.Dimensions: 1.6"H x 3.3"W x 8.9"D.Will not fit into the power supply slots of non-PoE switches.Compatible with Aruba 6300M PoE switches (JL659A, JL660A, JL661A, JL662A).Input voltage: 110-120VAC, 208-240VAC.Output voltage: 54VDC.Output power: 1600W.Frequency range: 50-60Hz

The EX4100-F-12P, which is a compact, fanless switch offering 12 x 1GbE Power over Ethernet Plus (PoE+) access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter. EX4100-F-12P can also be powered from an external 90W power sourcing equipment (PSE) device connected via the uplink port. Additional 90W of PoE budget is available if the second uplink port is connected to a PSE device. With external power adapter and the two uplink ports connected to 90W external PSE, total PoE power budget supported is up to 300W..Managed switch with 12 x 10/100/1000BASE-T PoE+, 2 x 100Mb/1GbE/2.5GbE/5GbE/10GbE uplinks, 4 x 10GbE stacking/uplink ports, with Standard SW ports.The EX4100-F-12P fanless switch offering 12 x 1GbE PoE+ access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter.Features 256Gbps switching capacity.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Meets or exceeds the CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, and TAA standards.Onboard (day 0), provision (day 1), and manage (day 2+) the EX4100-F from the cloud with Juniper Mist Wired Assurance, using AI-driven automation and insights to deliver improved experiences for IT staff, end users, and connected devices.Streamline IT operations, reduce mean time to repair, and deliver a new generation of wired and wireless networks; the EX4100-F provides rich streaming telemetry data for insights into switch health and wired service-level expectations (SLEs) for pre- and post-connection metrics.Scale with ease, build resiliency, and streamline management with Virtual Chassis and EVPN-VXLAN-based campus fabrics, which help to simplify configuring and maintaining multiple devices.Standards-based micro segmentation using group-based policies (GBP) leverages underlying VXLAN technology to provide agnostic endpoint access control for consistent security policies and granular control of application, business function, or user tags.Take segmentation to the next level by separating traffic within the same VLAN so IoT devices or users can traverse any port or switch within the network; maintain the same security policies without having to manually configure them each time.Enables per-flow level analytics, so you can monitor thousands of traffic flows per switch without impacting the CPU.Dimensions: 1.75"H x 10.59"W x 9.66"D.Lifetime manufacturer limited warranty

The HP® 2930F 24G 4SFP manageable layer 3 switch has uplink port, 24 RJ-45 ports, four SFP ports and one serial console for connectivity. It works with PC. It measures 1.72" x 17.42" x 7.88". This rack-mountable switch supports twisted pair as well as optical fiber media, Gigabit Ethernet technology and 1000Base-X as well as 10/100/1000Base-TX network technology. It has AirWave network management, intelligent management center, command-line interface, web browser, configuration menu, SNMP manager, Telnet, RMON1 and FTP management. It comes with one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie..Manageable layer 3 switch offers an affordable solution for businesses of all sizes that requires simple network management.Dimensions: 1.72" x 17.42" x 7.88".Compatible with PC.Color: Black.Interface: Uplink port, modular, 24 x RJ-45, four SFP and one serial (console).Media type supported: Twisted pair, optical fiber, Layer supported: Three, Network technology: 1000Base-X, 10/100/1000Base-TX.Standards: IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, Jumbo frame size: 9220, Throughput: 41.7 Mpps.Management feature: AirWave network management, IMC - intelligent management center, command-line interface, web browser, configuration menu.MAC address table size: 32K entries, IPv4 routing table entries: 10000, IPv6 routing table entries: 5000.Authentication method: CHAP, PAP, RADIUS, TACACS and TACACS+.Memory and processor: Dual core ARM Coretex A9 at 1016 MHz, 1GB DDR3 SDRAM, Packet buffer size: 12.38MB 4.5MB Ingress/7.875MB Egress, 4GB eMMC.Operating temperature: 32 to 113 deg F, Storage temperature: -40 to 158 deg F, Operating humidity range: 15 - 95% (non-condensing).Form factor: 1U rack-mountable and desktop.Power source: Internal power supply, Nominal voltage: 120 VAC, Power consumption operational: 29.3 W.Contains switch, one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie.Meets REACH, 80 PLUS Silver, CISPR 22 Class A, CISPR 24, CNS 13438, CSA C22.2 No. 60950-1-07, VCCI Class A certifications and standards.Weight: 5.31 lbs..Comes with lifetime limited warranty

Cisco™ Power module requires input voltage of 110/220 VAC by providing 54 VDC of output voltage. Power module is adaptable with Cisco™ industrial ethernet 3000 series switches..Cisco Industrial Ethernet 3000 Series Switches.Form factor: DIN-rail mount.Power consumption: Input voltage: 110 - 220 VAC, input voltage range: 88 - 300 VDC, 110 - 220 VAC, output voltage: 54 VDC, frequency: 50/60 Hz, current: 1.2 A.Compatibility: Cisco Industrial Ethernet 3000 series switches.Cisco™ Power module is compatible with Cisco™ industrial ethernet 3000 series switches and requires input voltage of 110/220 VAC by providing 54 VDC of output voltage.

NETGEAR ProSAFE 8-Port Gigabit PoE+ Smart Managed Switch with 2 SFP Ports (GS510TPP).190W future-proof PoE budget available across 8 Gigabit PoE+ ports (802.3at) - Connect multiple power demanding devices to your network with a single wire for connectivity AND lot of power.2 dedicated Gigabit SFP fiber ports - Ideal for active-active or active-passive redundant connections in aggregation to your network core.Quiet desktop operation or rack mounting - Temperature-based fan-speed control minimizes system acoustic noise in any environment with max 32dB at 25 C (77 F) ambient.Layer 3 static routing with 32 routes (IPv4 and IPv6) - Offloads your distribution or core layer routers with local interVLAN routing directly at the edge of your network.Easy-to-use Web browser-based management GUI - No need for an IT expert or a complicated user manual, just configure your network with the user-friendly NETGEAR Smart Managed Web GUI.Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling - Simplifies management of Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices....Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings -Latest energy-saving abilities including per-port automatic change to a lower power mode when the port link is down, or idle.Configurable L2 network features (VLANs, Rapid Spanning Tree, IGMP Snooping and Querier, IGMP Fast Leave...) -Intuitive Web management streamlines initial configuration for rapid onboarding at the access layer of your network.Advanced Smart Switching features (IPv4/IPv6 Layer 3 static routing, DiffServ QoS policies, LACP Link Aggregation, Broadcast control, Denial of service protection) - Will satisfy even the most advanced small and medium organizations.LIFETIME Limited Warranty - Includes LIFETIME Next Business Day (NBD) Replacement, LIFETIME Technical Chat online support, and 90 days free Technical Phone support.NETGEAR ProSAFE 8-Port PoE+ Gigabit Ethernet Smart Managed Switch with 2 SFP Ports, 190W, Lifetime warranty and lifetime technical chat support (GS510TPP)

The HPE Networking Instant On 1960 Switch (S0F35A#ABA) is a powerful, smart-managed switch designed for small to medium-sized businesses that need high-performance network solutions. Offering 12 ports, including 8 x 1GbE ports with PoE (Power over Ethernet) and 4 x 2.5GbE ports, this switch provides seamless connectivity for devices with varying speed requirements. The HPE 1960 series supports advanced features such as VLAN, QoS (Quality of Service), LACP (Link Aggregation Control Protocol), and network segmentation, enabling optimal network performance and security. With its 10GbE uplink ports and stackable capabilities, the Instant On 1960 Switch offers flexibility and scalability for growing network infrastructures. It is equipped with a robust PoE budget of 480W, making it suitable for powering PoE-enabled devices like IP cameras, access points, and phones. Additionally, it supports a variety of security features, including access control lists (ACLs), DHCP snooping, and 802.1X authentication, ensuring a secure and resilient network. This switch is designed for easy management, featuring a cloud-based management portal, mobile app support, and a user-friendly web GUI. It is optimized for energy efficiency, offering features like Energy Efficient Ethernet (EEE) to help reduce power consumption. With a compact, rack-mountable design, the HPE Instant On 1960 Switch is an excellent choice for businesses looking to build a high-performance, reliable network infrastructure..Features a total of 12 Ethernet ports, including 8 x 1GbE ports and 4 x 2.5GbE ports. It operates under a Gigabit Ethernet performance class and is a Smart Managed Switch, offering advanced management features for businesses..This switch supports PoE (Power over Ethernet), providing up to 480W PoE budget, making it ideal for powering devices such as IP cameras, access points, and phones directly through the network cables..Switch supports high-speed data transfer rates, including 10GbE uplink ports and 2.5GbE ports, ensuring fast and efficient data transmission across devices..The HPE Instant On 1960 switch comes with a rack-mountable form factor, allowing for easy integration into server racks or network equipment rooms..The HPE Instant On 1960 switch does not feature built-in wireless connectivity, as it is a wired Ethernet switch..The switch supports SNMP v1, v2, v3, allowing for advanced network monitoring and management through the Simple Network Management Protocol, making it suitable for complex network environments..Quality of Service (QoS) capabilities are included, enabling users to prioritize network traffic for specific applications or devices, ensuring optimal performance for high-priority network tasks..This switch includes robust system management features, such as a cloud-based management portal, a web GUI, and mobile app support. For security, it supports 802.1X authentication, DHCP snooping, and access control lists (ACLs), ensuring a secure network environment..Designed for high throughput, with support for up to 10GbE uplink ports. It operates in various modes, including VLAN, LACP, and network segmentation, for optimized data flow..This switch is equipped with Energy Efficient Ethernet (EEE) technology to reduce power consumption, making it an energy-efficient option for businesses, while still offering robust performance..The HPE Instant On 1960 switch complies with various industry standards and certifications. It supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and other networking protocols.

Cisco Catalyst 9300 series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..1100W power to port AC power supply for use in Cisco Catalyst 9300 switches.Input voltage: 115-240VAC on 12-6A.Energy efficiency rating: 80 PLUS Platinum.Features a power cord for connection to an AC power outlet.Dimensions: 1.58"H x 13.7"W x 3.25"D.Weight: 3.1 lbs.

Cisco PWR-IE50W-AC Expansion power module has AC input voltage rating of 100 - 240 V at 1.25 A, DC input voltage rating of 125 - 250 V at 1 A and DC output voltage rating of 24 V at 2.1 A. Offers easy and convenient installation on DIN-rails. Perfect choice for use with PWR-IE3000-AC switches..Power System for IE-3000-4TC and IE-3000-8TC Switches.Measures 5.8" x 2" x 4.4".Compatible with Cisco PWR-IE3000-AC power converter, Cisco switches: IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, IE-3000-8TC-E.Can be DIN rail mountable for easy installation.Has 1 x IEC 60320 C14 design provides maximum durability and excellent signal transmission.Frequency: 50 Hz Input, 60 Hz Input.Cisco Expansion power module is perfect choice for E-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E switches. Suitable for data networking and optical network applications.

The HP J9986A 24-port managed Gigabit Ethernet switch is perfect for data networking and has data transfer rate up to 1 Gbps. It is compatible to use with 5400R zl2 switch series. This switch supports Gigabit Ethernet 1000Base-T technology for reliable data transfer. It includes RJ-45 1000Base-T network LAN ports for connectivity..Gigabit Ethernet switch ensures to provide enterprise-class resiliency and innovative flexibility as well as scalability to mobile-first networks.Dimensions: 1.8"H x 10.3"W x 8.1"D.Compatible with PC.Has 24 RJ-45 autosensing 10/100/1000 PoE+ Gigabit Ethernet ports for connectivity.Features Freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD card and 4GB DDR3 SODIMM for reliable performance.Latency: 1000MB latency: < 2.8 us, 10 Gb/s latency: < 1.8 us, 40 Gb/s latency: < 1.5 us.Throughput: Up to 1142.8 Mpps.Switching capacity: 1920 Gb/s, Switch fabric speed: 2030 Gb/s.PoE+ internal power supply delivers constant power.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T.Form factor: Plug-in module.Contains HP 5412R zl2 switch and three HP 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 module J9986A.REACH and Green compliant.Weight: 45.19 lbs..Comes with lifetime limited warranty

Simple plug-and-play, with more than enough to power the entire network. 24 high-power PoE+ ports with a large budget to keep your devices always-ready..24 x high-power PoE+ ports with a large budget to keep your devices always ready.Dimensions: 1.7"H x 15.4"W x 8.7"D.Comes in gray.Non-blocking switching architecture for maximum throughput at wire speed.300W total power budget to power wireless AP, IP cameras, IP phones, and much more.Unique PoE technology automatically balances the PoE power, delivering exactly what each device needs.Fanless design means zero added noise wherever it's located, making it perfect for your home or business environment.Designed to optimize power usage, lowering operational costs.Durable desktop case for longevity.Supports desktop or rack-mount placement and includes all mounting hardware in the box.Ensure interoperability with any standards-based PDs

HPE Aruba 9000 series gateways provide high-performance networking, SD-WAN and security functionality in compact and cost-effective form factors. Perfectly suited for branch and small campus networks, the 9000 series gateways serve a key role within Aruba's SD-Branch solution, which unifies WLAN, LAN, SD-WAN and security for distributed enterprises. The 9000 Series can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform. Onsite deployment is accomplished with a simple mobile installer application..Rack-mountable switch provides high-performance networking, SD-WAN, and security functionality in compact and cost-effective form factor.Contains 12 100/1000BASE-T ports (six PoE+ ports).Can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform.Provides connectivity for up to 2048 users or client devices at up to 6Gbps of firewall throughput.Dimensions: 1.72"H x 15.55"W x 10.24"D.Maximum power consumption: 160W (with 120W of POE).Meets or exceeds UL, CAN/CSA-C22.2, EN, IEC, FCC, VCCI, FCC/ISED, MIC, NCC, ANATEL, COFTEL, CCC, KN32, KN35 standards.Cloud-managed and purpose-built for branch SDWAN requirements.Up to 10 times the performance and 80 times the client density of typical SD-WAN appliances.Unified policy enforcement for wired and wireless traffic through Aruba Dynamic Segmentation.Visibility into over 3000 applications with no added hardware.Includes flexible connectivity options, with up to 12 Ethernet ports (six PoE+) that can be used as access/WAN uplinks, a USB 3.0 port for cellular connectivity, and an IoT radio that supports Bluetooth 5, Zigbee, and near-field communication (NFC) wireless protocols.Can also be repurposed as Mobility Controllers starting with ArubaOS 8.5 software to provide WLAN and LAN services, such as Dynamic Segmentation, stateful firewall, and live upgrades.Features a Layer 4-7 stateful firewall with PEF to deliver a consistent user, device, and application awareness across WLAN, LAN, and WAN.1-year manufacturer limited warranty