QSFP Passive Copper Cable
7 results
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 3m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 3m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 1m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 1m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in brown.Maximum data transfer rate: 100 Gbps
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 5m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 5m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
Cisco QSFP-H40G-CU5M 40GBASE-CR4 16.4' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP copper cable offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in gray color for new look.Has cable length of 16.4' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has 1 x QSFP+ connector on first end and 1 x QSFP+ connector on second end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets RoHS compliance.Flexibility of interface choice.Hot-swappable input/output device that plugs into a 40-Gigabit Ethernet QSFP+ ethernet switch port.Support for 40GBASE Ethernet.Operating temperature: 32 - 158 deg F.Designed for Cisco Catalyst 3016.Cisco 40GBASE-CR4 16.4' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.
Cisco QSFP-H40G-CU3M 40GBASE-CR4 9.84' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP+ transceiver module offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in orange color for new look.Compatible with Cisco 40GBASE QSFP+ modules.Has cable length of 9.84' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has QSFP+ connector on first end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets IEC60825-1, CFR 21Section 1040, UL E116441, ELV standards.Cisco 40GBASE-CR4 9.84' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.
The Cisco 3.28' tangerine direct attach copper cable has QSFP+ male connector on first end and QSFP+ male connector on second end for enhanced connectivity. It features 30 AWG copper conductors for better conductivity. This copper cable is compatible with Cisco 40GBASE-SR4 QSFP+ copper module. It is perfect for short distances and provides a high cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks..Direct attach copper cable is a cost-effective way to establish 40 Gigabit link.Cable length: 3.28'.Connections: QSFP+ male on first end and QSFP+ male on second end.Connectivity: Wired.Has 30 AWG copper conductor for superior conductivity.Meets IEC60825-1, UL #E116441 Compliant, ELV Compliant, CFR 21Section 1040, RoHS-6 standards and certifications.Data transfer rate: 40 Gbps.Comes in tangerine color.Suitable for use with Cisco 40GBASE-SR4 QSFP+ copper module
The Cisco QSFP-4SFP10G-CU3M= 9.84' network cable is suitable for use with 40-Gigabit QSFP+ transceiver module. This gray network cable features one QSFP+ male connector on first end and four SFP+ male connectors on other end for connectivity. It has copper conductor for high electrical conductivity. This cable facilitates to connect a 40G QSFP+ port of a Cisco switch to four 10G SFP+ ports of a Cisco switch on the other end..Network cable is perfect for very short distances and offers a highly cost-effective way to connect within racks as well across adjacent racks.Cable length: 9.84'.Suitable for use with Cisco 40-Gigabit QSFP+ transceiver module.Comes in gray color.Connectors: One QSFP+ male on first end and four SFP+ male on second end.Conductor: Copper, Number of ways: four.Meets ELV, FCC CFR21 Part 1040, Laser Class 1, RoHS 6/6, UL standards and certifications
You May Also Like
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks. The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..vPassive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Interoperable with other IEEE-compliant 25GBASE-CR interfaces where applicable.Does not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.High-speed electrical interface compliant to IEEE 802.3by
Cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks..Yellow.Twinaxial SFP+ male/SFP+ male.8.2'.Material: Polycarbonate connector, polyvinyl chloride (PVC) jacket, Gauge: 30 AWG.Conductor: Copper.Power: 1 W consumption, Temperature: 0 - 70 deg C commercial range, -40 - 85 deg C storage range.Supports network devices.Compliant and standards: SFP+ MSA SFF-8461, UL #E116441, ELV, RoHS.Weight: 75 g.Compatibility: Cisco catalyst switch: 2960-24LC-S, 2960-24PC-L, 2960-24PC-S, 2960-24TC, 2960-24TC-L, 2960-24TC-S, 2960-48PST-L, 2960-48PST-S, 2960-48T, 2960-48TC, 2960-48TC-L, 2960-48TC-S, 2960-8TC, 2960-8TC-S, 2960G-24TC, 2960G-48TC, 2960G-8TC.Warranty: 90 days limited
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks..Passive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 6.56'.Features SFP28 to SFP28 connectors (male to male).Comes in brown.Do not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Features SFP28 cable type to better accommodate your precise requirements with maximum productivity.Fully compatible with switches
SFP+/SFP+.32.81'.Connector on first end: 1 x SFP+.Connector on second end: 1 x SFP+.Conductor: Copper.American wire gauge (AWG): 28.Features: Active cable (signal regeneration).Environmental parameters: Min operating temperature 32 degree F, Max operating temperature 158 degree F.Compatible with: Cisco Nexus 2000 Switch, Cisco Nexus 5000 Switch.Type: CU
Cisco® Active twinax 7m cable assembly having a 10G ethernet protocol has 2 x SFP+ ports consists of 24AWG copper conductor. Features Cisco® 10GBASE SFP+ modules and has 10G form factor and supports digital optical monitoring capability..Length: 22.97'.30 AWG.1000 Base.Cisco® Active twinax 7m cable assemblies provide 10 Gigabit Ethernet options for data centres, enterprise wiring closets and service provider transport applications.
Cisco™ 2 m twinax cable for 10GBASE-CU SFP+ allows to have point-to-point in-rack and across rack network switch/server connections. Cable offers low power consumption with 0.5 W for superior performance and has 30 AWG, 100 ohm impedance..Twinaxial.Connector: 1 x SFF-8431 SFP+ first end, 1 x SFF-8431 SFP+ second end.6.56'.Brown.Conductor: Copper.Compatibility: Cisco 2960-24LC-S, 2960-24TC-L, 2960-48T, 2960-8TC, 2960S-24PD-L, 2960S-48FPD-L, 2960S-48LPS-L and 2960S-48TS-S catalyst switches.Power consumption: 1 W.Temperature: 0 to 70 deg C operating.Dimensions: 8.5 mm(H) x 13.4 mm(W) x 56.5 mm(D).Features smallest 10G form factor.Hot swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch.Provides flexibility of interface choice, supports pay-as-you-populate model, supports digital optical monitoring capability.Supports the Cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Supports 10GBase Ethernet and OTU2/OTU2e.Complaints and standards: RoHS.Warranty: 90 days limited.Cisco™ 2 m Twinax 10GBASE-CU SFP+ cable supports multi-gigabit data rates up to 10.5 Gb/s and is hot-swappable with fiber optic modules.
Cisco QSFP-100G to QSFP-100G AOC cables are suitable for short distances and offer a flexible way to connect within racks and across racks. Active optical cables are much thinner and lighter than copper cables, which makes cable management easier. AOCs enable efficient system airflow, which is critical in high-density racks..Active optical cable, 10m length.Interface: 100GBASE QSFP.Maximum outer dimensions for the QSFP connector module: 0.53"H x 0.72"W x 2.85"D.5-year manufacturer limited warranty
For use in 10Gbps ethernet and fibre channel applications..SFP+/SFP+.Fully compliant to MSA SFF-8431 specification.3.28'.Connector on first end: 1 x SFF-8431 male SFP+.Connector on second end: 1 x SFF-8431 male SFP+.Conductor: Copper.Reach: 1 m.Equivalent to Cisco SFP-H10GB-CU1-5M.100 ohm twinaxial cable, diecast metal shells, pull-to-release latching.Support for 1x, 2x, 4x and 8x fiber channel data rates.Device supported: Network device.Designed for: Cisco Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48.Hot pluggable SFP 20pin footprint.Low power consumption, intended application 10Gbps hardware interconnection.Package includes: 1 m 30 AWG SFP+ high speed passive copper 10Gbps cable, System requirements: SFP+ Direct Attach Cable ( DAC ) twinaxial cables conform to SFF-8431 standards.Green Compliant: Yes, Green Compliance Certificate/Authority: RoHS.Warranty: Lifetime limited
Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Features Fiber Optic cable type for your convenience and desired usability.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Allows you to access all of the networked data, swiftly and securely.Cisco 25G Active Optical Cable 3-meter - 9.84 ft Fiber Optic Network Cable for Network Device, Switch, Line Card - First End: SFP28 Network - Second End: SFP28 Network - 25 Gbit/s
The Cisco™ 6.56' brown fiber optic network cable has one SFP+ network connectors on both the end. It works with Catalyst 3560 as well as 3850, Nexus 93XX as well as X9464, ONE Nexus 93XX and UCS 5108 blade server chassis. This cable has copper conductors for enhanced conductivity..Network cable for reliable connection.Cable length: 6.56'.Connections: One SFP+ network connectors on both end.Connectivity: Wired.Material: Copper conductor.Meets ELV, GR-20-CORE, IEC 60825-1, ITU-T G.709, Laser Class 1, RoHS, UL standards and certifications.Color: Brown.Cable type: Fiber optic.Compatibility: Catalyst 3560, 3850, Nexus 93XX, X9464, ONE Nexus 93XX, UCS 5108 blade server chassis
The Cisco™ SFP-10G-AOC1M= SFP+ 3.28' fiber optic network cable features one SFF-8431 SFP+ network connector on both ends. Cable in beige, is perfect for applications requiring high bandwidth. It withstands temperature range of 23 to 158 deg F..Network cable for home or office applications.Dimensions: 3.28' cable.Color: Beige.Interface/ports: One SFF-8431 SFP+ network connector on both ends.Cable type: Fiber optic.Temperature: 23 - 158 deg F operating.Meets RoHS, MSA, UL E116441 and ELV certifications and standards
The Cisco SFP-H25G-CU2.5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector comprises an EEPROM providing product information which can be read by the host system. With these features, this easy to install, high speed, cost-effective direct attach copper twinax Cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers..Cable length: 8'.Comes in black.Meets or exceeds RoHS 6/6, MSA SFF-8472, ELV, and SFF-8402/IEEE 802.3by standards.1-year manufacturer limited warranty
The Dell™ 470-AAVJ direct attach twinaxial networking cable of 9.84' long, provides 10 GbE SFP+ connectivity. This cable is perfect for use with your Dell N4000 series, N-series, PowerConnect 6224, 6224F and 6224P..Direct attach twin axial network cable is perfect for network device.Cable length: 9.84'.Copper conductor.Compatible with DELL NETWORKING N4000 series N4032, N4032F, N4064F, DELL NETWORKING N-Series N2024P, N3024, N3024P, N3048, PowerConnect 6224, 6224F.Connector on first end: 1 x SFP+ male.Connector on second end: 1 x SFP+ male.Technology: Twin axial
Cisco SFP28 copper direct-attach cables are suitable for very short links and offer a highly cost-effective way to establish a link between the SFP28 ports of Cisco switches within racks and across adjacent racks..Cable length: 16.4'.Comes in black.Meets or exceeds MSA SFF-8472, ELV, RoHS 6/6, and SFF-8402/IEEE 802.3by standards.1-year manufacturer limited warranty
The cisco 10GBASE SFP+ modules offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Compatibility: Cisco 10GBASE SFP+ modules.Smallest 10G form factor.Cable length: 3 m.Temperature: 32 - 158 deg F commercial.Supports digital optical monitoring capability.Bail latch color: Orange.Supports the cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Cable type: Twinax cable, passive, 24 AWG cable assembly.Provides flexibility of interface choice.90 days limited warranty.Orange SFP+ network cable 3M, passive twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks.
With its thicker diameter to carry the light of multiple wavelengths, this multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Provides high performance and flexible solution with 100 Gigabit Ethernet connectivity.With 100GBase-SR4 technology, get up to 100Gbps data transfer rate over optical fiber cable