100G QSFP Cable
5 results
Cisco QSFP-100G to QSFP-100G AOC cables are suitable for short distances and offer a flexible way to connect within racks and across racks. Active optical cables are much thinner and lighter than copper cables, which makes cable management easier. AOCs enable efficient system airflow, which is critical in high-density racks..Active optical cable, 1m length.Interface: 100GBASE QSFP.Maximum outer dimensions for the QSFP connector module: 0.53"H x 0.72"W x 2.85"D.5-year manufacturer limited warranty
Cisco QSFP-100G to QSFP-100G AOC cables are suitable for short distances and offer a flexible way to connect within racks and across racks. Active optical cables are much thinner and lighter than copper cables, which makes cable management easier. AOCs enable efficient system airflow, which is critical in high-density racks..Active optical cable, 10m length.Interface: 100GBASE QSFP.Maximum outer dimensions for the QSFP connector module: 0.53"H x 0.72"W x 2.85"D.5-year manufacturer limited warranty
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 1m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 1m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in brown.Maximum data transfer rate: 100 Gbps
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 5m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 5m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 3m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 3m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
You May Also Like
The Cisco QSFP-4SFP10G-CU3M= 9.84' network cable is suitable for use with 40-Gigabit QSFP+ transceiver module. This gray network cable features one QSFP+ male connector on first end and four SFP+ male connectors on other end for connectivity. It has copper conductor for high electrical conductivity. This cable facilitates to connect a 40G QSFP+ port of a Cisco switch to four 10G SFP+ ports of a Cisco switch on the other end..Network cable is perfect for very short distances and offers a highly cost-effective way to connect within racks as well across adjacent racks.Cable length: 9.84'.Suitable for use with Cisco 40-Gigabit QSFP+ transceiver module.Comes in gray color.Connectors: One QSFP+ male on first end and four SFP+ male on second end.Conductor: Copper, Number of ways: four.Meets ELV, FCC CFR21 Part 1040, Laser Class 1, RoHS 6/6, UL standards and certifications
Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Features Fiber Optic cable type for your convenience and desired usability.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Allows you to access all of the networked data, swiftly and securely.Cisco 25G Active Optical Cable 3-meter - 9.84 ft Fiber Optic Network Cable for Network Device, Switch, Line Card - First End: SFP28 Network - Second End: SFP28 Network - 25 Gbit/s
Cisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. AOC cable require BASE-R FEC, or RS-FEC on the host ports. Works with Cisco UCS 2408 Fabric Extender only..SFP28 to SFP28 cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.This Active Optical Cables comes in two meters length.Direct attach assemblies with SFP connectors.Comes in brown.Maximum data transfer rate: 25000 Mbps.Only compatible with the Cisco UCS 2408 fabric extender.AOC cable require BASE-R FEC, or RS-FEC on the host ports
With its thicker diameter to carry the light of multiple wavelengths, this multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Provides high performance and flexible solution with 100 Gigabit Ethernet connectivity.With 100GBase-SR4 technology, get up to 100Gbps data transfer rate over optical fiber cable
Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 16.4'.Features SFP28 to SFP28 connectors (male to male).Allows you to access all of the networked data, swiftly and securely.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Network Device supported for better reliance and optimal performance.Features Fiber Optic cable type for your convenience and desired usability.Cisco 25G Active Optical Cable 5-meter - 16.40 ft Fiber Optic Network Cable for Network Device, Switch - First End: SFP28 Network - 25 Gbit/s
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks. The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..vPassive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Interoperable with other IEEE-compliant 25GBASE-CR interfaces where applicable.Does not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.High-speed electrical interface compliant to IEEE 802.3by
The Cisco™ SFP-10G-AOC1M= SFP+ 3.28' fiber optic network cable features one SFF-8431 SFP+ network connector on both ends. Cable in beige, is perfect for applications requiring high bandwidth. It withstands temperature range of 23 to 158 deg F..Network cable for home or office applications.Dimensions: 3.28' cable.Color: Beige.Interface/ports: One SFF-8431 SFP+ network connector on both ends.Cable type: Fiber optic.Temperature: 23 - 158 deg F operating.Meets RoHS, MSA, UL E116441 and ELV certifications and standards
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks..Passive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 6.56'.Features SFP28 to SFP28 connectors (male to male).Comes in brown.Do not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Features SFP28 cable type to better accommodate your precise requirements with maximum productivity.Fully compatible with switches
The Cisco™ SFP-10G-AOC3M= 10GBASE-AOC SFP+ 3m fiber optic network cable comes with the SFP+ network copper connectors. It offers the data transfer rate up to 10.5 Gb/s and is hot swappable. This cable operates at a temperature range of 0 to 70 deg C..Network cable is well suited for very short distances.Dimensions: 3 m L.Comes in orange color and features copper conductor for better electrical conductivity.Interface: One SFP+ network first end, one SFP+ network second end.Has fiber optic cable for reliable data transfer.Compatible with networking device.Operating temperature: 32 - 158 deg F.Meets RoHS, Green, GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1 certification and standards.Comes with 90 days warranty
The Cisco 10GBASE SFP+ module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Transceiver module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Comes in gray.Power consumption: 0.1W.Compact 10G form factor for great density per chassis.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing).Supports “pay-as-you-populate” model for investment protection and ease of technology migration.Digital optical monitoring for strong diagnostic capabilities.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.5-year manufacturer limited warranty
The Cisco multi-mode rugged SFP module adapts your switch or router, enabling you to connect long-range cables. As a result, you can extend the range of your network and expand connectivity. The SFP module is made with an intuitive design that is easy to install and use, so you can expand your network quickly and with minimum hassle..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.33"(H) x 0.52"(W) x 2.22"(D).Compatibility: Cisco 100 m Ethernet SFP Compatibility matrix.Connectivity technology: Wired.Optical wave length: 1310 nm.Temperature: 122 deg F max operating.Compliant standards: IEEE 802.3, IEEE 802.3ah.Connectivity media: Multi mode fiber 100Base-FX.Max transfer distance: 1.2 miles.Data transfer rate: 100 Mbps fast ethernet.Form factor: Hot-swappable.90 days limited warranty.Cisco Multi-Mode Rugged SFP Module - Hot-Swap Capability
Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.
The cisco 10GBASE SFP+ modules offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Compatibility: Cisco 10GBASE SFP+ modules.Smallest 10G form factor.Cable length: 3 m.Temperature: 32 - 158 deg F commercial.Supports digital optical monitoring capability.Bail latch color: Orange.Supports the cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Cable type: Twinax cable, passive, 24 AWG cable assembly.Provides flexibility of interface choice.90 days limited warranty.Orange SFP+ network cable 3M, passive twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks.
The Cisco 3.28' tangerine direct attach copper cable has QSFP+ male connector on first end and QSFP+ male connector on second end for enhanced connectivity. It features 30 AWG copper conductors for better conductivity. This copper cable is compatible with Cisco 40GBASE-SR4 QSFP+ copper module. It is perfect for short distances and provides a high cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks..Direct attach copper cable is a cost-effective way to establish 40 Gigabit link.Cable length: 3.28'.Connections: QSFP+ male on first end and QSFP+ male on second end.Connectivity: Wired.Has 30 AWG copper conductor for superior conductivity.Meets IEC60825-1, UL #E116441 Compliant, ELV Compliant, CFR 21Section 1040, RoHS-6 standards and certifications.Data transfer rate: 40 Gbps.Comes in tangerine color.Suitable for use with Cisco 40GBASE-SR4 QSFP+ copper module
The Cisco Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers high-density and low-power Ethernet connectivity for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The Cisco QSFP dual-rate bi-directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF)..Uses multimode fiber (MMF) as the fiber cable type and features a duplex LC optical connector for connectivity..QSFP transceivers enable high-speed 40G/100G Ethernet over multimode fiber using BiDi tech for short-reach data center connectivity..Supports data transfer rates of up to 100,000 Mbps (100 Gbps) and 40,000 Mbps (40 Gbps)..Maximum distance of 100 meters over OM4 or OM5 multimode fiber for 100G Ethernet and 150 meters over OM4 for 40G Ethernet..Supports 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) over multimode fiber using a duplex LC connector..Has a typical power consumption of approximately 3.5 watts..Hot-swappable, allowing it to be inserted or removed from a compatible device without powering down the system..MSA (Multi-Source Agreement) compliant, ensuring interoperability with other QSFP28-compliant devices across various platforms..Operates at two wavelengths: 855 nm and 908 nm, using short-range bidirectional optics over multimode fiber.
The Cisco™ SFP-10G-AOC7M= 10GBase-AOC SFP+ to SFP+ fiber optic direct attach cable in blue color, offers connection within racks and across adjacent racks. The 22.97' direct attach cable with copper media, supports network devices..Twinaxial direct attach cable is perfect for signaling applications.Cable length: 22.97'.Color: Blue.Connectors: One SFP+ on both the ends.Device supported: Network device.Ethernet technology: 10 Gigabit Ethernet.Transceiver type: AOC.Media: Copper.Meets GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1, RoHS certifications and standards