Simplex Fiber Optic Cable

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 3.3'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 9.8'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 16.4'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 32.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 65.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 6.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length: 3.3'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 19.7'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 49.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 22.9'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Yellow.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.3.28'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 9/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 0.7 oz..Warranty: Lifetime limited.Warranty: Lifetime limited

Connect fiber network devices for high-speed transfers with LSZH rated cable. The SMFIBLCSC1 1m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications. This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each Duplex 9/125 (OS1) Single-Mode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability, and is backed by our lifetime warranty..Guaranteed reliability.Suitable for installations under restrictive building codes, with LSZH rating.Cable Length: 3.28 ft

OM5 LC to LC multimode duplex fiber optic patch cable by StarTech facilitates connectivity across 40G and 100G networks. It supports SWDM (Shortwave Wavelength Division Multiplexing) across an extended wavelength range of 850-953nm VCSEL, enhancing signal quality and performance capacity over OM4. Precision-manufactured ceramic ferrules ensure correct fiber alignment to prevent connectivity issues and minimize insertion loss. Designed for reliability in high-density network applications, the LC to LC UPC polished fiber ends greatly improves return loss characteristics over older PC polishing techniques. The Laser-Optimized Multi-Mode Fiber (LOMMF) OM5 fiber patch cable is perfect for 850-953nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and 1300 nm LED sources..Enhance the performance capabilities of SWDM applications with this OM5 fiber cable.Cable length: 49.2'.LC/LC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in Aramid-reinforced green jacket for a loaded bend radius of 6cm and 3cm when unloaded.Multimode OM5 fiber cable supports 10/40/100G networks and backward compatible with OM4/OM3.Perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.LSZH jacket emits low toxic fumes if combusted and safe for enclosed/poorly ventilated spaces.Attenuation value under 2.4dB/km outperforms industry standards.High micro-bend resistance facilitates tight bends in complex installations.Short Wavelength Division Multiplexing (SWDM) enables extended 850-953nm wavelength support for greater channel isolation, enhancing performance capacity beyond OM4 cables.Zipcord design, color-coded connectors for polarity.Lifetime manufacturer limited warranty

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode Simplex OS2 Fiber Optic Cable is immune to EMI and optimized for 40G/100Gbps networks; Ideal for space-constrained installations requiring minimal fiber count.3.28 ft. cable for short distance application.This cable features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, and Bend Resistance.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty