Active Fiber-Optic Cable
8 results
The HPE Active Optical Cables (AOCs) provide the bandwidth to meet the exponential data growth in Telco, e-Commerce and high performance computing (HPC). The HPE Active Optical Cables (AOCs) are much lighter and consume less power than traditional copper cables. They are ideal cable solutions for high-density data center and high performance computing applications. Features: Cost-effective alternative to transceivers for short distance fiber optic connection.: Smaller bend radius, lower power consumption and lower weight compared to DAC.:.Experience a simpler way to connect devices with the entire business network.Features Fiber Optic cable type.Features Active.Features 1 x SFP28 Network connector, permitting you to establish a connection with a network device
The Cisco™ 6.56' brown fiber optic network cable has one SFP+ network connectors on both the end. It works with Catalyst 3560 as well as 3850, Nexus 93XX as well as X9464, ONE Nexus 93XX and UCS 5108 blade server chassis. This cable has copper conductors for enhanced conductivity..Network cable for reliable connection.Cable length: 6.56'.Connections: One SFP+ network connectors on both end.Connectivity: Wired.Material: Copper conductor.Meets ELV, GR-20-CORE, IEC 60825-1, ITU-T G.709, Laser Class 1, RoHS, UL standards and certifications.Color: Brown.Cable type: Fiber optic.Compatibility: Catalyst 3560, 3850, Nexus 93XX, X9464, ONE Nexus 93XX, UCS 5108 blade server chassis
Cisco QSFP-100G to QSFP-100G AOC cables are suitable for short distances and offer a flexible way to connect within racks and across racks. Active optical cables are much thinner and lighter than copper cables, which makes cable management easier. AOCs enable efficient system airflow, which is critical in high-density racks..Active optical cable, 10m length.Interface: 100GBASE QSFP.Maximum outer dimensions for the QSFP connector module: 0.53"H x 0.72"W x 2.85"D.5-year manufacturer limited warranty
Cisco QSFP-100G to QSFP-100G AOC cables are suitable for short distances and offer a flexible way to connect within racks and across racks. Active optical cables are much thinner and lighter than copper cables, which makes cable management easier. AOCs enable efficient system airflow, which is critical in high-density racks..Active optical cable, 1m length.Interface: 100GBASE QSFP.Maximum outer dimensions for the QSFP connector module: 0.53"H x 0.72"W x 2.85"D.5-year manufacturer limited warranty
Cisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. AOC cable require BASE-R FEC, or RS-FEC on the host ports. Works with Cisco UCS 2408 Fabric Extender only..SFP28 to SFP28 cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.This Active Optical Cables comes in two meters length.Direct attach assemblies with SFP connectors.Comes in brown.Maximum data transfer rate: 25000 Mbps.Only compatible with the Cisco UCS 2408 fabric extender.AOC cable require BASE-R FEC, or RS-FEC on the host ports
Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 16.4'.Features SFP28 to SFP28 connectors (male to male).Allows you to access all of the networked data, swiftly and securely.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Network Device supported for better reliance and optimal performance.Features Fiber Optic cable type for your convenience and desired usability.Cisco 25G Active Optical Cable 5-meter - 16.40 ft Fiber Optic Network Cable for Network Device, Switch - First End: SFP28 Network - 25 Gbit/s
Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Features Fiber Optic cable type for your convenience and desired usability.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Allows you to access all of the networked data, swiftly and securely.Cisco 25G Active Optical Cable 3-meter - 9.84 ft Fiber Optic Network Cable for Network Device, Switch, Line Card - First End: SFP28 Network - Second End: SFP28 Network - 25 Gbit/s
Poly Fiber Optic Data Transfer Cable - 32.81 ft Fiber Optic Data Transfer Cable for USB Device.For exceptional quality, upright compatibility and reliability use this data transfer cable.USB Device supported according to your requirements with maximum productivity.Active feature for better reliability and ensure maximum productivity.Black.Features Fiber Optic cable type for your convenience and desired usability
You May Also Like
The Cisco™ SFP-10G-AOC1M= SFP+ 3.28' fiber optic network cable features one SFF-8431 SFP+ network connector on both ends. Cable in beige, is perfect for applications requiring high bandwidth. It withstands temperature range of 23 to 158 deg F..Network cable for home or office applications.Dimensions: 3.28' cable.Color: Beige.Interface/ports: One SFF-8431 SFP+ network connector on both ends.Cable type: Fiber optic.Temperature: 23 - 158 deg F operating.Meets RoHS, MSA, UL E116441 and ELV certifications and standards
The Cisco™ SFP-10G-AOC3M= 10GBASE-AOC SFP+ 3m fiber optic network cable comes with the SFP+ network copper connectors. It offers the data transfer rate up to 10.5 Gb/s and is hot swappable. This cable operates at a temperature range of 0 to 70 deg C..Network cable is well suited for very short distances.Dimensions: 3 m L.Comes in orange color and features copper conductor for better electrical conductivity.Interface: One SFP+ network first end, one SFP+ network second end.Has fiber optic cable for reliable data transfer.Compatible with networking device.Operating temperature: 32 - 158 deg F.Meets RoHS, Green, GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1 certification and standards.Comes with 90 days warranty
The Cisco™ SFP-10G-AOC7M= 10GBase-AOC SFP+ to SFP+ fiber optic direct attach cable in blue color, offers connection within racks and across adjacent racks. The 22.97' direct attach cable with copper media, supports network devices..Twinaxial direct attach cable is perfect for signaling applications.Cable length: 22.97'.Color: Blue.Connectors: One SFP+ on both the ends.Device supported: Network device.Ethernet technology: 10 Gigabit Ethernet.Transceiver type: AOC.Media: Copper.Meets GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1, RoHS certifications and standards
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks. The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..vPassive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Interoperable with other IEEE-compliant 25GBASE-CR interfaces where applicable.Does not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.High-speed electrical interface compliant to IEEE 802.3by
The Cisco QSFP-4SFP10G-CU3M= 9.84' network cable is suitable for use with 40-Gigabit QSFP+ transceiver module. This gray network cable features one QSFP+ male connector on first end and four SFP+ male connectors on other end for connectivity. It has copper conductor for high electrical conductivity. This cable facilitates to connect a 40G QSFP+ port of a Cisco switch to four 10G SFP+ ports of a Cisco switch on the other end..Network cable is perfect for very short distances and offers a highly cost-effective way to connect within racks as well across adjacent racks.Cable length: 9.84'.Suitable for use with Cisco 40-Gigabit QSFP+ transceiver module.Comes in gray color.Connectors: One QSFP+ male on first end and four SFP+ male on second end.Conductor: Copper, Number of ways: four.Meets ELV, FCC CFR21 Part 1040, Laser Class 1, RoHS 6/6, UL standards and certifications
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 3m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 3m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks..Passive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 6.56'.Features SFP28 to SFP28 connectors (male to male).Comes in brown.Do not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Features SFP28 cable type to better accommodate your precise requirements with maximum productivity.Fully compatible with switches
The Cisco SFP-H25G-CU2.5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector comprises an EEPROM providing product information which can be read by the host system. With these features, this easy to install, high speed, cost-effective direct attach copper twinax Cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers..Cable length: 8'.Comes in black.Meets or exceeds RoHS 6/6, MSA SFF-8472, ELV, and SFF-8402/IEEE 802.3by standards.1-year manufacturer limited warranty
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 1m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 1m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in brown.Maximum data transfer rate: 100 Gbps
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 5m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 5m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
The cisco 10GBASE SFP+ modules offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Compatibility: Cisco 10GBASE SFP+ modules.Smallest 10G form factor.Cable length: 3 m.Temperature: 32 - 158 deg F commercial.Supports digital optical monitoring capability.Bail latch color: Orange.Supports the cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Cable type: Twinax cable, passive, 24 AWG cable assembly.Provides flexibility of interface choice.90 days limited warranty.Orange SFP+ network cable 3M, passive twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks.
Cisco SFP28 copper direct-attach cables are suitable for very short links and offer a highly cost-effective way to establish a link between the SFP28 ports of Cisco switches within racks and across adjacent racks..Cable length: 16.4'.Comes in black.Meets or exceeds MSA SFF-8472, ELV, RoHS 6/6, and SFF-8402/IEEE 802.3by standards.1-year manufacturer limited warranty
Cisco® Active twinax 7m cable assembly having a 10G ethernet protocol has 2 x SFP+ ports consists of 24AWG copper conductor. Features Cisco® 10GBASE SFP+ modules and has 10G form factor and supports digital optical monitoring capability..Length: 22.97'.30 AWG.1000 Base.Cisco® Active twinax 7m cable assemblies provide 10 Gigabit Ethernet options for data centres, enterprise wiring closets and service provider transport applications.
SFP+/SFP+.32.81'.Connector on first end: 1 x SFP+.Connector on second end: 1 x SFP+.Conductor: Copper.American wire gauge (AWG): 28.Features: Active cable (signal regeneration).Environmental parameters: Min operating temperature 32 degree F, Max operating temperature 158 degree F.Compatible with: Cisco Nexus 2000 Switch, Cisco Nexus 5000 Switch.Type: CU
The Cisco 10GBASE SFP+ module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Transceiver module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Comes in gray.Power consumption: 0.1W.Compact 10G form factor for great density per chassis.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing).Supports “pay-as-you-populate” model for investment protection and ease of technology migration.Digital optical monitoring for strong diagnostic capabilities.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.5-year manufacturer limited warranty
The Cisco 10/25GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. This module requires RS-FEC on the host ports for operation at 25G..This 10/25GBASE-LR module supports a link length of 10km on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G.Max power consumption: 1.3W.Meets or exceeds the IEEE 802.3by and IEEE 802.3cc standards.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.This module requires RS-FEC on the host ports for operation at 25G.Transmit and receive wavelength: 1260-1355nm (10G) and 1295-1325nm (25G)