Ubiquiti 5AC

The Ubiquiti® R5AC-LITE-US wireless bridge has transmission speed of 500 Mbps and operates in the frequency band of 5 GHz. This bridge measuring 1.5" x 3.3" x 6.4", has one RJ-45 interface for reliable connectivity..Wireless bridge supports high data rates.Dimensions: 1.5"H x 3.3"W x 6.4"D.Interfaces/ports: One RJ-45.Connectivity technology: Wireless, Ethernet technology: Gigabit Ethernet.Wireless transmission speed: 500 Mbps, Frequency band: 5 GHz, full-band.Data link protocol: IEEE 802.11n, MIMO Technology.Link type: PtP, PtMP.RoHS Compliant

Shielded airMAX CPE With a die-cast aluminum base and interchangeable antenna, the IsoStation is available in two models and brings increased performance to your network using technology that isolates beam communications between your devices. The IsoStation AC delivers throughput speeds of up to 450+ Mbps, and the IsoStation M5 delivers throughput speeds of up to 100+ Mbps. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The IsoStation also gets maximum gain out of the smallest footprint. Beam Performance Perfected The IsoStation can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Enhanced Co-Location Asymmetrical horn antenna options (60 degrees and 90 degrees ) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30 degrees and 45 degrees , the default) are ideal for cluster sector installations with high co-location requirements. Improved Noise Immunity IsoStation blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. High MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Management Wi-Fi Radio The IsoStation AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Interchangeable Isolation Antenna Horn.All-Metal, Shielded Radio Base.airMAX ac Processor for Superior Performance

Ubiquiti UniFi Building-to-Building Bridge is the ideal solution for short-range, high-throughput connectivity. Integration with the UniFi application makes bridging two networks seamless. As a pack of two radios, UniFi Building-to-Building Bridge contains everything you need to get up and running within minutes. Enjoy simple, easy-to-use gigabit connectivity anywhere..UniFi Building-to-Building Bridge's seamless integration with the UniFi Network application makes connecting two networks simple.Range up to 1640.42'.1.7+ Gbps bidirectional plug-and-play 60GHz bridge with 5GHz radio redundancy.One 10/100/1000 Ethernet port.Dimensions: 5.51"H x 5.51"W x 3.54"D.Package contents: UniFi building-to-building bridge (x2), ball joint mount (x2), lock ring (x2), metal strap (x2), Gigabit PoE (48V, 0.32A) with mounting bracket (x2), power cord (x2)

Shielded airMAX® ac BaseStation with airPrism® Technology : With a die-cast aluminum base and interchangeable antenna, the PrismStationTM AC, brings increased performance to your network using technology that isolates beam communications between your devices. Utilizing Ubiquiti's advanced airMAX® ac processor, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). Built to Fight Noise With Prism Active RF Filter: The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios - and functioning despite noise from other vendors' radios (unlike GPS synchronization) - airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Modular Design: The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs..Interchangeable Isolation Antenna Horn.airPrism Active RF Filtering Technology.Dedicated Wi-Fi Radio for Management

airMAX ac BaseStation with airPrism Technology The Rocket Prism 5AC covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas. Management Wi-Fi Radio The Rocket Prism 5AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The Rocket Prism 5AC features enhanced protection against ESD events. Revolutionary Filtering Technology Ubiquiti's patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments. Designed for High Performance The Rocket Prism 5AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Full-Band 5 GHz Coverage The Rocket Prism 5AC delivers complete coverage of the 5 GHz spectrum with a single radio. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..5 GHz Wide Band Operating Frequency.Custom Ubiquiti airMAX ac Processor.Dedicated Wi-Fi Radio for Management

Classic NanoStation design with updated proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP station (CPE)..Compact, UISP-ready WiFi radio sporting a classic NanoStation design and an updated airMAX AC chipset.More than 450Mbps real TCP/IP throughput.2 x 10/100/1000 Mbps Ethernet ports.Dimensions: 7.05" x 3.05"W x 2.33"D.Surge protection should be used for all outdoor installations.Supported voltage range: 24V ±10%.5GHz operating frequency.Meets or exceeds CE, FCC, IC standards.2 years manufacturer limited warranty

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

The LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI. The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.Long-range station directs RF energy in a tighter beamwidth.Dimensions: 20.18"H x 15.19"W x 10.17"D.Features aluminum reflector, plastic PC and comes in white.Equipped with 10/100/1000 Ethernet port.Features improved radio design, mounting, and surge protection.Manage Wi-Fi radio/UISP with mobile app.Works on AirOS 8.Feaures access point PtMP airMAX mixed mode, airMAX ac Protocol Support, long-range point-to-point (PtP) link mode.Automatic channel selection, automatic/manual transmit power control, automatic distance selection (ACK timing) ensure great performance.AirMagic channel selection tool, redesigned user interface, and dynamic configuration changes are desinged for great usability.Optimization for mobile devices and detailed device statistics are included.HTML5 technology and comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer are made for convenient use.24V, 0.3A Gigabit PoE adapter and pole-mounting kit are included.Meets or exceeds CE, FCC, IC standards.2-year manufactuer limited warranty

The Ubiquiti® airCube-AC Series ACB-AC-US wireless access point in black, has a sleek design with durable plastic construction. It features 4 Gigabit Ethernet ports with data transfer rate of up to 1.14 Gbps. The dual band access point utilizes 802.11ac and 2x2 MIMO technologies for reliable performance. It has throughput of up to 300 Mbps in 2.4 GHz radio band and up to 866.7 Mbps in 5 GHz radio band. This access point with super antenna, ensures UNMS and U mobile support. It is suitable for use in your customer deployments..Wi-Fi access point is perfect for use in customer deployments.Dimensions: 3.52"H x 3.51"W x 3.46"D.Comes in black color with plastic construction.Interfaces/ports: 4 x Gigabit Ethernet port.Wireless LAN: 802.11ac 2x2.Gain: 4 dBi at 2.4 GHz, 5 dBi at 5 GHz.Frequency: Dual band 2.4 GHz, 5 GHz simultaneously.Power supply: 24 Volt PoE or 24 Volt PSU in on LAN port 1.Wireless transmission speed: 1.14 Gbps.Maximum power consumption: 8.5 W, temperature: -10 to 50 deg C (operating), humidity: 5 to 95 percent noncondensing (operating).Throughput: Up to 300 Mbps in the 2.4 GHz radio band, Up to 866.7 Mbps in the 5 GHz radio band.Features UNMS support, super antenna, U mobile support and sleek design.Features 22 dBm maximum TX power, status LED and UNMS app for fast setup from a mobile device.Features PoE pass-through, Powers airMAX device, with PoE in/out, controllable 24 V PoE out on WAN port technology.Meets CE, FCC, IC standards.Weight: 9.88 oz.

The Ubiquiti® PowerBeam® ac PBE-5AC-620 450+ Mbps high-performance airMAX® wireless bridge features one 10/100/1000 RJ-45 Ethernet port and has outdoor UV stabilized plastic enclosure for extra durability. It has Atheros MIPS 74Kc 720 MHz processor and features 128MB DDR2 memory for multi-tasking. This bridge comes with a pole-mount kit..PowerBeam® ac high-performance airMAX® wireless bridge is perfect for CPE deployments requiring maximum performance.Dimensions: 15.2"H x 24.41"Dia.Comes in white color, outdoor UV stabilized plastic enclosure for enhanced protection.Interfaces/ports: 10/100/1000 RJ-45 Ethernet port.Wireless LAN: IEEE 802.11a/b.Throughput: 450+ Mbps.Frequency: 5 GHz, Gain: 29 dBi, Range: 30+ km.Power supply: 24 VDC, 0.5 A (Gigabit PoE), Power consumption: 8.5 W max, Power method: Passive PoE (pairs 4, 5+, 7, 8 return).Temperature: -40 - 70 deg C Operating, Humidity: 5 - 95 percent Condensing operating.Processor: Atheros MIPS 74Kc, 720 MHz, Memory: 128MB DDR2, 16MB flash.LEDs: Power, LAN, four WLAN, signal strength LEDs: Software-adjustable to correspond to custom RSSI levels, Polarization: Dual linear.Wind loading: 1830 N at 200 kmph, Wind survivability: 200 kmph, ESD/EMP protection: + 24 kV Air/contact.Featuring a dish reflector design with proprietary airMAX® ac technology, InnerFeed® technology integrates the radio into the feedhorn of an antenna.Includes pole-mount kit.Meets FCC, IC, CE, RoHS and IEC 68-2-11 certifications and standards.Weight: 14.11 lbs..Comes with 1 year limited warranty

The UniFi nanoHD AP has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi Network mobile app (iOS or Android), the UniFi Network Application is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance..Dual-band access point for over 200 clients.Supports ac wireless standard with 6.5Mbps to 1.7Gbps and 58Mbps to 1.7Gbps data transfer rates.Powered using PoE+ and supports Wi-Fi 6E standard.Contains 1 x 1GbE RJ45 port.Includes: mounting plate, ceiling backing plate, and hardware kit.Works on 2.4/5GHz frequencies.Meets or exceeds the CE, FCC, IC, and cULus standards.Covers up to 1500 sq. ft..Supported voltage range: 44-57VDC.Maximum power consumption: 10.5W.Can be wall- or ceiling-mounted.PoE power adapter included.1 Year Warranty.Omni-directional 802.11ac Wave 2 Wi-Fi Access Point with 4x4 MU-MIMO technology. The price / performance leader in enterprise Wi-Fi.

High-Performance airMAX ac Bridge Incorporating innovative industrial design with proprietary airMAX ac technology, the NanoBeam AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint. Management Wi-Fi Radio The NanoBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The NanoBeam AC features enhanced protection against ESD events. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the NanoBeam AC features the highest gain for its size. The NanoBeam AC's excellent beam directivity provides the best performance in high-noise environments. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Advanced Software Technology Ubiquiti's airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Plug and Play Installation The NanoBeam AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 10km (6.21 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 Gigabit Ethernet (RJ-45) main Ethernet port (PoE-in) and 1 x secondary Ethernet port (PoE pass-through).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter and a pole mount kit.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5470-5725MHz, U-NII-3 5725-5850MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.1 Year Warranty

High-Density Applications Powered by MU-MIMO Technology 802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience. Radio Hardware Acceleration Independent 2.4 GHz and 5 GHz dedicated hardware offload for maximized multi-user throughput and reduced latency CPU Hardware Acceleration Dedicated hardware offload for QoS, Guest Control, and Client Management Optimized for MU-MIMO Antenna System Optimized for 802.11ac Wave 2 MU-MIMO Beamforming Beamforming Data is sent and received using multiple antennas to increase throughput and range. Advanced Features in UniFi Controller UniFi is quickly expanding to a full Software Defined Networking (SDN) solution with seamless integration of high-performance switching, gateways, and more...Type of Product: Wireless Access Point.Adapter Speed: 1733Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 8.7 x 8.7 x 1.9.Power Rating/Voltage: DC Input Power, Consumption 17 W.Powerful Hardware The UniFi AC HD AP features the latest in Wi-Fi 802.11ac Wave 2 MU-MIMO technology..Expandable Unlimited scalability: build wireless networks as big or small as needed. Start with one (or upgrade to a five-pack) and expand to thousands while maintaining a single unified management system..Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.UniFi is quickly expanding to a full Software Defined Networking (SDN) solution with seamless integration of high‑performance switching, gateways, and more

2x2 MIMO airMAX ac CPE The LiteBeam AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Management Wi-Fi Radio The LiteBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS 8 and airView airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the LiteBeam AC fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Comes with a 24V/0.3A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management radio: 2412-2462MHz.Meets or exceeds the CE, FCC, and IC standards.Operating system: airOS 8.1 Year Warranty

Provide your business with a wireless solution that ensures a speedy and steady data transfer rate.With IEEE 802.11ac network technology and data transfer rate of up to 330 Mbit/s, enjoy superior HD media playback and lag-free gaming.Up to 10x faster than standard Ethernet connectivity for your wired network

The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)

High-Performance airMAX ac Bridge Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is ideal for CPE deployments requiring maximum performance. Management Wi-Fi Radio The PowerBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam AC offers a more robust mount with a convenient lifting loop or handle. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses. Plug and Play Installation The PowerBeam AC requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the PowerBeam AC features the highest gain for its size. The PowerBeam AC's excellent beam directivity provides the best performance in high-noise environments. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management dadio: 2412-2462MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.Mounting bracket conveniently offers elevation adjustments (20-degree tilt).1 Year Warranty

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

Ubiquiti Networks designed airMAX AC radios for high performance and ease of installation. You have the freedom to deploy the Bullet AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations. The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go..Access Point is a fully integrated radio that delivers up to 300+ Mb/s real TCP/IP throughput.Dimensions: 7.48"H x 1.81"W x 1.81"D.Access point covers both 2.4GHz and 5GHz radio bands, covering a wide range of frequencies that work well for both short- and long-distance links.Meets or exceeds CE, FCC, and IC certifications.Networking interface: Gigabit Ethernet port; antenna connector: N-type connector.Throughput 160+ Mb/s at 2.4GHz, 300+ Mb/s at 5GHz.Maximum power consumption: 8W; output power: 22dBm.Power supply: 24VDC, 0.3A (minimum); power method: 24V passive PoE (pairs 4, 5+; 7, 8 return).ESD/EMP protection: +/- 24kV contact/air.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity 5% to 95% noncondensing.ETSI300-019-1.4 shock and vibration.1-year manufacturer limited warranty

The Ubiquiti® AM-5AC22-45 airMAX® AC sector antenna for rocket R5AC-PTMP base station, features significant advance in scalability, noise isolation and beam performance to complement the rocket 5ac radios in point to multipoint networks. The antenna comes with robust mechanical design for outdoor application use and a built-in rocket mount, for tool-less installation. This device has 5 GHz frequency range and 22 dBi gain..Antenna comes with robust mechanical design for outdoor application.Dimensions: 29.53"H x 8.47"W x 3.7"D.Compatible with rocket 5ac R5AC-PTMP base station.Comes in white color.Connector type: RF, number of connectors: 2.Frequency range: 5.10 - 5.85 GHz, frequency band type: SHF.Gain: 22 dBi, MIMO technology.HPOL beam width: 45 deg (6 dBi), VPOL beam width: 45 deg (6 dBi), electrical beam width: 4 deg.Electrical downtilt: 2 deg, Max. VSWR: 1.5:1.Wind survivability: 200 km/h (125 mph), form factor: Pole.Wind loading: 347 N at 200 km/h (78 lbf at 125 mph).Polarization: Dual-linear, cross-polarization isolation: 30 dB min.Mounting: Universal pole mount, rocket bracket and weatherproof RF jumpers included.Includes antenna, protective shroud, 2x U-brackets, 2x pole brackets, 2x pole clamps, 4x carriage bolts, 4x flange bolts, 8x flange nuts, 2x RF cable.Meets EN 302 326 DN2, Green, RoHS, WEEE standards.Weight: 13.23 lbs..45 deg beamwidth antenna is compatible with Rocket 5ac R5AC-PTMP base station.

The Ubiquiti® PowerBeam® PBE-M5-400-US AC pole-mountable wireless bridge incorporating dish reflector design with proprietary airMAX® ac technology, offers best performance in high-noise environments. This wireless bridge with 10/100/1000 Ethernet port interface, transfers data at the rate of 150 Mbps. It improves the wireless coverage up to 15.5 miles with the help of outdoor antenna with 25 dBi gain. It operates in 5150 - 5875 MHz frequency band. The outdoor UV stabilized plastic enclosure ensures durability. This wireless bridge incorporates LEDs to show power, one LAN and four WLAN status..Wireless bridge offers an outstanding performance in high-noise environments.Dimensions: 10.8"H x 16.5"W x 16.5"Dia.Enclosure: Outdoor UV stabilized plastic.Transmission speed: 150 Mbps, Outdoor antenna range: 15.5 mile.Interfaces/ports: One 10/100/1000 Ethernet port.Power consumption: 8 W, Power supply: 24 V, 0.5 A Gigabit PoE.Gain: 25 dBi, Operating frequency: 5150 - 5875 MHz.Memory: 64MB DDR2, 8MB flash.LEDs: One power, one LAN, four WLAN.Mounting: Pole mountable.Polarization: Dual linear.Temperature: -40 to 70 deg C, Humidity: 5 - 95 percent non-condensing.Specifications: Integrated radio design, plug and play installation.Advanced software technology for reliable operation.Incredible antenna beam performance.Contains pole mount Kit.Meets FCC, IC, CE, RoHS certifications and standards.Weight: 3.87 lbs..Comes with limited warranty

Powerful and affordable 5 GHz sector access point. GPS synchronized units provide up to 450+ Mbps data throughput. Introducing the Ubiquiti airMAX LiteAP AC, the latest high-performance access point with disruptive pricing. Featuring an ultra-lightweight form factor, the Ubiquiti airMAX LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these models operates in the worldwide, license-free 5 GHz frequency range with high-performance speeds..Powerful access point that creates a wireless local area network.Dimensions: 14.21"H x 4.9"W x 2.81"D.Comes in white.Equipped with 10/100/1000 Ethernet port.Minimal fasteners simplify installation.Ball-joint mount provides adjustment flexibility for versatile mounting options.Features a lightweight antenna with an integrated radio in a sleek design.Delivers high throughput over its wired connection.Precise GPS frame synchronization enables colocated devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability.Integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Pole mounting kit included.Meets or exceeds FCC, IC, CE standards.2-year manufactuer limited warranty