Ubiquiti 5AC

Shielded airMAX CPE With a die-cast aluminum base and interchangeable antenna, the IsoStation is available in two models and brings increased performance to your network using technology that isolates beam communications between your devices. The IsoStation AC delivers throughput speeds of up to 450+ Mbps, and the IsoStation M5 delivers throughput speeds of up to 100+ Mbps. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The IsoStation also gets maximum gain out of the smallest footprint. Beam Performance Perfected The IsoStation can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Enhanced Co-Location Asymmetrical horn antenna options (60 degrees and 90 degrees ) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30 degrees and 45 degrees , the default) are ideal for cluster sector installations with high co-location requirements. Improved Noise Immunity IsoStation blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. High MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Management Wi-Fi Radio The IsoStation AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Interchangeable Isolation Antenna Horn.All-Metal, Shielded Radio Base.airMAX ac Processor for Superior Performance

Shielded airMAX® ac BaseStation with airPrism® Technology : With a die-cast aluminum base and interchangeable antenna, the PrismStationTM AC, brings increased performance to your network using technology that isolates beam communications between your devices. Utilizing Ubiquiti's advanced airMAX® ac processor, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). Built to Fight Noise With Prism Active RF Filter: The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios - and functioning despite noise from other vendors' radios (unlike GPS synchronization) - airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Modular Design: The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs..Interchangeable Isolation Antenna Horn.airPrism Active RF Filtering Technology.Dedicated Wi-Fi Radio for Management

airMAX ac BaseStation with airPrism Technology The Rocket Prism 5AC covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas. Management Wi-Fi Radio The Rocket Prism 5AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The Rocket Prism 5AC features enhanced protection against ESD events. Revolutionary Filtering Technology Ubiquiti's patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments. Designed for High Performance The Rocket Prism 5AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Full-Band 5 GHz Coverage The Rocket Prism 5AC delivers complete coverage of the 5 GHz spectrum with a single radio. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..5 GHz Wide Band Operating Frequency.Custom Ubiquiti airMAX ac Processor.Dedicated Wi-Fi Radio for Management

Classic NanoStation design with updated proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP station (CPE)..Compact, UISP-ready WiFi radio sporting a classic NanoStation design and an updated airMAX AC chipset.More than 450Mbps real TCP/IP throughput.2 x 10/100/1000 Mbps Ethernet ports.Dimensions: 7.05" x 3.05"W x 2.33"D.Surge protection should be used for all outdoor installations.Supported voltage range: 24V ±10%.5GHz operating frequency.Meets or exceeds CE, FCC, IC standards.2 years manufacturer limited warranty

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

The LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI. The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.Long-range station directs RF energy in a tighter beamwidth.Dimensions: 20.18"H x 15.19"W x 10.17"D.Features aluminum reflector, plastic PC and comes in white.Equipped with 10/100/1000 Ethernet port.Features improved radio design, mounting, and surge protection.Manage Wi-Fi radio/UISP with mobile app.Works on AirOS 8.Feaures access point PtMP airMAX mixed mode, airMAX ac Protocol Support, long-range point-to-point (PtP) link mode.Automatic channel selection, automatic/manual transmit power control, automatic distance selection (ACK timing) ensure great performance.AirMagic channel selection tool, redesigned user interface, and dynamic configuration changes are desinged for great usability.Optimization for mobile devices and detailed device statistics are included.HTML5 technology and comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer are made for convenient use.24V, 0.3A Gigabit PoE adapter and pole-mounting kit are included.Meets or exceeds CE, FCC, IC standards.2-year manufactuer limited warranty

The Ubiquiti® PowerBeam® ac PBE-5AC-620 450+ Mbps high-performance airMAX® wireless bridge features one 10/100/1000 RJ-45 Ethernet port and has outdoor UV stabilized plastic enclosure for extra durability. It has Atheros MIPS 74Kc 720 MHz processor and features 128MB DDR2 memory for multi-tasking. This bridge comes with a pole-mount kit..PowerBeam® ac high-performance airMAX® wireless bridge is perfect for CPE deployments requiring maximum performance.Dimensions: 15.2"H x 24.41"Dia.Comes in white color, outdoor UV stabilized plastic enclosure for enhanced protection.Interfaces/ports: 10/100/1000 RJ-45 Ethernet port.Wireless LAN: IEEE 802.11a/b.Throughput: 450+ Mbps.Frequency: 5 GHz, Gain: 29 dBi, Range: 30+ km.Power supply: 24 VDC, 0.5 A (Gigabit PoE), Power consumption: 8.5 W max, Power method: Passive PoE (pairs 4, 5+, 7, 8 return).Temperature: -40 - 70 deg C Operating, Humidity: 5 - 95 percent Condensing operating.Processor: Atheros MIPS 74Kc, 720 MHz, Memory: 128MB DDR2, 16MB flash.LEDs: Power, LAN, four WLAN, signal strength LEDs: Software-adjustable to correspond to custom RSSI levels, Polarization: Dual linear.Wind loading: 1830 N at 200 kmph, Wind survivability: 200 kmph, ESD/EMP protection: + 24 kV Air/contact.Featuring a dish reflector design with proprietary airMAX® ac technology, InnerFeed® technology integrates the radio into the feedhorn of an antenna.Includes pole-mount kit.Meets FCC, IC, CE, RoHS and IEC 68-2-11 certifications and standards.Weight: 14.11 lbs..Comes with 1 year limited warranty

High-Performance airMAX ac Bridge Incorporating innovative industrial design with proprietary airMAX ac technology, the NanoBeam AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint. Management Wi-Fi Radio The NanoBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The NanoBeam AC features enhanced protection against ESD events. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the NanoBeam AC features the highest gain for its size. The NanoBeam AC's excellent beam directivity provides the best performance in high-noise environments. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Advanced Software Technology Ubiquiti's airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Plug and Play Installation The NanoBeam AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 10km (6.21 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 Gigabit Ethernet (RJ-45) main Ethernet port (PoE-in) and 1 x secondary Ethernet port (PoE pass-through).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter and a pole mount kit.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5470-5725MHz, U-NII-3 5725-5850MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.1 Year Warranty

2x2 MIMO airMAX ac CPE The LiteBeam AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Management Wi-Fi Radio The LiteBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS 8 and airView airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the LiteBeam AC fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Comes with a 24V/0.3A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management radio: 2412-2462MHz.Meets or exceeds the CE, FCC, and IC standards.Operating system: airOS 8.1 Year Warranty

High-Performance airMAX ac Bridge Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is ideal for CPE deployments requiring maximum performance. Management Wi-Fi Radio The PowerBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam AC offers a more robust mount with a convenient lifting loop or handle. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses. Plug and Play Installation The PowerBeam AC requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the PowerBeam AC features the highest gain for its size. The PowerBeam AC's excellent beam directivity provides the best performance in high-noise environments. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management dadio: 2412-2462MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.Mounting bracket conveniently offers elevation adjustments (20-degree tilt).1 Year Warranty

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

The Ubiquiti® AM-5AC22-45 airMAX® AC sector antenna for rocket R5AC-PTMP base station, features significant advance in scalability, noise isolation and beam performance to complement the rocket 5ac radios in point to multipoint networks. The antenna comes with robust mechanical design for outdoor application use and a built-in rocket mount, for tool-less installation. This device has 5 GHz frequency range and 22 dBi gain..Antenna comes with robust mechanical design for outdoor application.Dimensions: 29.53"H x 8.47"W x 3.7"D.Compatible with rocket 5ac R5AC-PTMP base station.Comes in white color.Connector type: RF, number of connectors: 2.Frequency range: 5.10 - 5.85 GHz, frequency band type: SHF.Gain: 22 dBi, MIMO technology.HPOL beam width: 45 deg (6 dBi), VPOL beam width: 45 deg (6 dBi), electrical beam width: 4 deg.Electrical downtilt: 2 deg, Max. VSWR: 1.5:1.Wind survivability: 200 km/h (125 mph), form factor: Pole.Wind loading: 347 N at 200 km/h (78 lbf at 125 mph).Polarization: Dual-linear, cross-polarization isolation: 30 dB min.Mounting: Universal pole mount, rocket bracket and weatherproof RF jumpers included.Includes antenna, protective shroud, 2x U-brackets, 2x pole brackets, 2x pole clamps, 4x carriage bolts, 4x flange bolts, 8x flange nuts, 2x RF cable.Meets EN 302 326 DN2, Green, RoHS, WEEE standards.Weight: 13.23 lbs..45 deg beamwidth antenna is compatible with Rocket 5ac R5AC-PTMP base station.