Ubiquiti AirFiber
7 results
Ubiquiti™ Networks™ Airfiber? 24 GHz wireless bridge includes PoE GigE adapter, pole mount kit and Ethernet port to deliver high-speed internet. Wireless bridge comes with split antenna and features GPS technology to offer location/time information..Wireless data transfer rate: 1.37 Gbps.Frequency: 24 GHz.Dimensions: 25.6"(H) x 16.8"(W) x 11.9"(D).Interfaces/ports: Ethernet port, fast ethernet port, gigabit ethernet port, management port.Antenna gain: 33/38 dBi, outdoor antenna range: 8.1 mile, split antenna type.Wireless security: 128-Bit AES.Power source: PoE.Form factor: Pole mountable.Features: GPS.Ideal for outdoor, PtP bridging and carrier-class network backhauls.Delivers amazing wireless throughput of up to 1.4+ Gbps, surpassing conventional wired backhauls.Full-duplex mode for <1 ms latency, resulting in increased efficiency for carrier-class network backhauls.Operates in worldwide.Includes PoE GigE adapter, pole mount kit.Certifications and standards: FCC, CE, IC.Weight: 23.15 lbs..Warranty: 1 year limited.Ubiquiti™ Networks™ Airfiber® 24 GHz wireless bridge delivers amazing wireless throughput of up to 1.4+ Gb/s and is ideal for outdoor, PtP bridging as well as carrier-class network backhauls.
Ubiquiti Networks continues to disrupt the wireless broadband market with revolutionary technology at breakthrough pricing by introducing Ubiquiti airFiber 5XHD, a modular airFiber radio system that will serve a wide range of frequencies and is designed to be compatible with a variety of Ubiquiti antennas..Modular radio system that will serve a wide range of frequencies and is designed to be compatible with a variety of Ubiquiti antennas.Radio system speed: 1.34Gb/s.Features one 10/100/1000 Ethernet port.8.82"H x 3.23"W x 1.89"D.Powered by PoE at 24V connection.Features 4.8 GHz - 6.2 GHz frequency range.Meets CE, FCC, IC certifications.Features AES-256 encryption.Features auto output power that causes the radio system to set the output power (EIRP) to the appropriate level.The radio's transmit power level can be programmed up to +29dBm.The radio can split downlink and uplink traffic and support asymmetric traffic as needed.The radio offers configurable support for 2, 2.5, 4, and 5 ms frames; timing is compatible with all other synchronous systems, and 5 ms frame length is compatible with airMAX networks.The radio can operate on different frequencies for TX and RX, allowing great flexibility for interference avoidance.Support for different channel bandwidths for TX and RX allows users to scale required data capacity more efficiently.Adaptive modulation rates of up to 4096QAM are supported.Creation of backup firmware images ensures fail-safe configuration and enhances reliability.Real-time spectral analysis for the full band on live links is perfomed without interrupting the link operation.The radio has an operating voltage range of 19-50VDC3 and provides enhanced surge protection.1-year manufacturer limited warranty
Breaking free from the congested 5 GHz band, Ubiquiti airFiber 11 11 is the first modular radio system purpose-built for the 11 GHz licensed frequency market. Housed in a compact, highly efficient form factor, Ubiquiti airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications..Radio system purpose-built for the 11GHz licensed frequency market.Dimensions: 12.87"H x 3.39"W x 4.41"D.Comes in white.Equipped with 10/100/1000 Ethernet and 10/100 Ethernet ports.Features more than 1.2Gbps throughput.Proprietary INVICTUS processor deliveres great perfomance.Integrates with airFiber 11GHz antennas.Utilizes distinct Rx and Tx frequencies.Accepts PoE or DC power.Uses secure 128-bit AES encryption.50V, 1.2A PoE Gigabit adapter included.2-year manufactuer limited warranty
Ubiquiti airFiber 60 LR 60 GHz radio system featuring wave technology with True Duplex gigabit performance for PtP Links over 12 km distances Ubiquiti airFiber 60 LR is a 60GHz radio designed for high-throughput connectivity over an extended range. Ubiquiti airFiber 60 LR features the integrated high-gain dish antenna for high speed, long-range performance Point-to-Point (PtP) links. New WaveTechnology enables incredible long-range performance within the 60GHz spectrum. Includes a built-in Bluetooth management radio for easy setup..Radio system designed for high-throughput connectivity over an extended range.Dimensions: 14.2"H x 14.3"Dia..Features aluminum/UV stabilized polycarbonate enclosure and comes in white.Equipped with 10/100/1000Mbps RJ45 Ethernet port.Features low-interference 60GHz spectrum.GPS is integrated.Works on a long range, up to 12 km.Precision alignment mount included.Meets or exceeds CE, FCC, IC standards.2-year manufactuer limited warranty
The Ubiquiti airFiber X AF-5G23-S45, Antenna is perfect for everyday use..Compact antenna for wireless data network.Compatible with airFiber X wireless access point.Dimensions: 14.9"Dia.Antenna gain: 23dBi, frequency: 5 GHz (SHF).Features compact footprint for deployment flexibility and advanced RF isolation design.Comes with limited warranty.Frequency Range: 5.1 - 5.9 GHz.Gain: 23 dBi
airFiber 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market that breaks free from the congested 5 GHz band. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it perfect for carrier backhaul, building-to-building enterprise use, or public safety applications..First modular radio system purpose-built for the 11GHz licensed frequency market that breaks free from the congested 5GHz band.Integrates with AF-11G35 11GHz antenna.Dimensions: 12.87"H x 4.41"W x 3.39"D.Full duplex point-to-point radio with up to 1.2+ Gbps throughput.Includes one high-band duplexer for SISO mode (MIMO mode requires an optional second duplexer).Supports separate TX/RX frequencies.Accepts PoE or DC power
5 GHz PtMP LTU client with advanced RF performance, functions in a PtMP environment with the LTU-Rocket as the BaseStation. Incorporating innovative industrial design with advanced technology, the Ubiquiti LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on proprietary LTU technology, the Ubiquiti LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference..Subscriber station to communicate with base stations.Dimensions: 12.46"H x 12.46"W x 6.68"D.Functions in a PtMP environment with the LTU-Rocket as the basestation.Features outdoor UV-stabilized plastic enclosure and comes in white.Equipped with 10/100/1000 Ethernet port.Features 10/20/30/40/50MHz channel width flexibility.Provides modulation rates of up to 4096QAM.Can use different frequencies for TX and RX to avoid interference.Designed for quick yet reliable mounting on a pole.Auto output power option allows you to set the output power (EIRP) to the appropriate level.PtMP network can manage signal levels to enhance network stability and achieve optimal wireless performance with the highest possible modulation.Built-in GPS improves synchronization and allows map and Fresnel views on the dashboard.2-year manufactuer limited warranty
You May Also Like
The Ubiquiti® airFiber® full duplex point-to-point Gigabit radio operates at 5 GHz high-frequency band. It is perfect for carrier backhaul, building-to-building enterprise use or public safety applications. It has one 10/100/1000 Ethernet port, one 10/100 Ethernet, one RJ-12 and alignment tone port for enhanced connectivity. It provides 128-Bit AES encryption with 164/205 forward error correction for added safety..Full duplex point-to-point gigabit radio is perfect for carrier backhaul, building-to-building enterprise use or public safety applications.Connections: One 10/100/1000 Ethernet port, one 10/100 Ethernet, one RJ-12 and alignment tone port.Dimensions: 938.4 mmH x 468.4 mmW x 281.4 mmD.Power supply: 50 V, 1.2 A PoE (42-58VDC) GigE adapter, Power consumption: 40 W Maximum.Frequency: High-band 5 GHz, Channel bandwidth: 100 MHz.Maximum throughput: 1.0+ G/ps.Maximum range: 100+ km.Operating frequency: 5725 - 5850 MHz (FCC 15.247, IC RSS 21) 5725 - 5875 MHz (ETSI EN 302 502) 5725 - 6200 MHz (Other Regions).Encryption: 128-Bit AES, Forward error correction: 164/205, Cyclic prefix: 1/16 fixed, Uplink/downlink ratio: 50 percent fixed.Antenna: 23 dBi (TX/RX gain), Beamwidth: 6 deg, Front-to-back ratio: 70 dB, Polarity: Dual-slant polarization, Cross-polarity isolation: > 28 dB.Wind loading: 194 lbf at 125 mph, Wind survivability: 125 mph.Mounting: Pole mount kit.LEDs: Twelve status LEDs: Data port link/activity, data port speed, management port link/activity, management port speed, GPS synchronization.Meets CE, FCC and IC certifications and standards.Weight: 16 kg
The Ubiquiti® airFiber® X antenna features advance noise isolation and beam performance to increase the bridging with airFiber X radios. This pole-mountable antenna operates at 5 GHz and has 30 dBi gain to reduce interference. It is perfect to use in various applications from carrier backhauls between towers to PtP bridging between buildings..airFiber® X antenna is ideal for radio communication.Frequency: 5 GHz, Frequency range: 5.1 - 5.9 GHz, Frequency band type: SHF, Antenna gain: 30 dBi.Dimensions: 15.2"H x 25.6"W x 25.6"D.Beam width: 5.8 deg (3 dB) at +45 deg, 5.8 deg (3 dB) at -45 deg, Front-to-back ratio: 30 dB.VSWR: 1.6:1 max, Wind loading: 790 N at 200 km/h, Wind survivability: 200 km/h.Polarization: Dual-linear, Cross-pol isolation: 35 dB min, ETSI specification: EN 302 326 DN2.Mounting: Universal pole mount, suitable for use with AF-5X Radio.Feature significant advances in noise isolation and beam performance to complement the airFiber X radios.Compact form factor allows airFiber X antennas to use in various applications from carrier backhauls between towers to PtP bridging between buildings.Plug-and-play functionality for hassle-free use.Innovative industrial design enhances RF isolation to significantly reduce interference and deliver superior gain for high-capacity.Contains airFiber X radio bracket and weatherproof RF connectors.Weight: 16.31 lbs..Comes with 1 year limited warranty
The Ubiquiti® airCube-AC Series ACB-AC-US wireless access point in black, has a sleek design with durable plastic construction. It features 4 Gigabit Ethernet ports with data transfer rate of up to 1.14 Gbps. The dual band access point utilizes 802.11ac and 2x2 MIMO technologies for reliable performance. It has throughput of up to 300 Mbps in 2.4 GHz radio band and up to 866.7 Mbps in 5 GHz radio band. This access point with super antenna, ensures UNMS and U mobile support. It is suitable for use in your customer deployments..Wi-Fi access point is perfect for use in customer deployments.Dimensions: 3.52"H x 3.51"W x 3.46"D.Comes in black color with plastic construction.Interfaces/ports: 4 x Gigabit Ethernet port.Wireless LAN: 802.11ac 2x2.Gain: 4 dBi at 2.4 GHz, 5 dBi at 5 GHz.Frequency: Dual band 2.4 GHz, 5 GHz simultaneously.Power supply: 24 Volt PoE or 24 Volt PSU in on LAN port 1.Wireless transmission speed: 1.14 Gbps.Maximum power consumption: 8.5 W, temperature: -10 to 50 deg C (operating), humidity: 5 to 95 percent noncondensing (operating).Throughput: Up to 300 Mbps in the 2.4 GHz radio band, Up to 866.7 Mbps in the 5 GHz radio band.Features UNMS support, super antenna, U mobile support and sleek design.Features 22 dBm maximum TX power, status LED and UNMS app for fast setup from a mobile device.Features PoE pass-through, Powers airMAX device, with PoE in/out, controllable 24 V PoE out on WAN port technology.Meets CE, FCC, IC standards.Weight: 9.88 oz.
Ubiquiti UniFi Building-to-Building Bridge is the ideal solution for short-range, high-throughput connectivity. Integration with the UniFi application makes bridging two networks seamless. As a pack of two radios, UniFi Building-to-Building Bridge contains everything you need to get up and running within minutes. Enjoy simple, easy-to-use gigabit connectivity anywhere..UniFi Building-to-Building Bridge's seamless integration with the UniFi Network application makes connecting two networks simple.Range up to 1640.42'.1.7+ Gbps bidirectional plug-and-play 60GHz bridge with 5GHz radio redundancy.One 10/100/1000 Ethernet port.Dimensions: 5.51"H x 5.51"W x 3.54"D.Package contents: UniFi building-to-building bridge (x2), ball joint mount (x2), lock ring (x2), metal strap (x2), Gigabit PoE (48V, 0.32A) with mounting bracket (x2), power cord (x2)
The LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI. The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.Long-range station directs RF energy in a tighter beamwidth.Dimensions: 20.18"H x 15.19"W x 10.17"D.Features aluminum reflector, plastic PC and comes in white.Equipped with 10/100/1000 Ethernet port.Features improved radio design, mounting, and surge protection.Manage Wi-Fi radio/UISP with mobile app.Works on AirOS 8.Feaures access point PtMP airMAX mixed mode, airMAX ac Protocol Support, long-range point-to-point (PtP) link mode.Automatic channel selection, automatic/manual transmit power control, automatic distance selection (ACK timing) ensure great performance.AirMagic channel selection tool, redesigned user interface, and dynamic configuration changes are desinged for great usability.Optimization for mobile devices and detailed device statistics are included.HTML5 technology and comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer are made for convenient use.24V, 0.3A Gigabit PoE adapter and pole-mounting kit are included.Meets or exceeds CE, FCC, IC standards.2-year manufactuer limited warranty
The Ubiquiti® R5AC-LITE-US wireless bridge has transmission speed of 500 Mbps and operates in the frequency band of 5 GHz. This bridge measuring 1.5" x 3.3" x 6.4", has one RJ-45 interface for reliable connectivity..Wireless bridge supports high data rates.Dimensions: 1.5"H x 3.3"W x 6.4"D.Interfaces/ports: One RJ-45.Connectivity technology: Wireless, Ethernet technology: Gigabit Ethernet.Wireless transmission speed: 500 Mbps, Frequency band: 5 GHz, full-band.Data link protocol: IEEE 802.11n, MIMO Technology.Link type: PtP, PtMP.RoHS Compliant
The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.
Ubiquiti™ Networks™ airMAX? 16 dBi Sector antenna has MIMO technology and operates at 4.9 - 5.9 GHz frequency with adjustable bandwidth options. Antenna with rocket kit includes universal pole mount, rocketM bracket and weatherproof RF jumpers..Frequency: 5.15 - 5.85 GHz.Dimensions: 14.4"(H) x 2.5"(W) x 1.6"(D).Antenna gain: 16 dBi, frequency band type: SHF.Polarization: Dual linear, Survival wind speed: 2200 in/s.Form factor: Sector.Application/usage: Base station.Features: MIMO technology.Pair the airMAX sector antenna with a RocketM basestation for sector coverage in point-to-multipoint networks.Highly resistant to noise interference, provide superior gain and beam performance for high capacity, multipoint networks.Versatile feature advanced RF isolation and adjustable beamwidth options: 60, 90 or 120 degrees.Designed with robust mechanical design for outdoor application use.Compatibility: Ubiquiti RocketM radios.Includes universal pole mount, RocketM bracket, weatherproof RF jumpers.Certifications and standards: ETSI: EN 302 326 DN2.Weight: 2.43 lbs..Ubiquiti™ Networks™ airMAX® 16 dBi Sector antenna has robust mechanical design for outdoor base station application and provides superior beam performance for multipoint networks.
Ubiquiti™ Networks™ airMAX® Variable beam width antenna has titanium rocket kit to enhances receiver performance and creates a powerful basestation. MIMO antenna measuring 385 mm x 149 mm x 76 mm has pole mounting kit for easy installation..Frequency: 5.45 - 5.85 GHz.Dimensions: 385 mm x 149 mm x 76 mm.Gain (beamwidth dependent): 17 dBi at 60 deg, 16 dBi at 90 deg, 15 dBi at 120 deg, frequency band type: UHF.Polarization: Dual linear, Survival wind speed: 2200 in/s.Form factor: Sector.Application/usage: Base station.Features: MIMO technology.Elevation beamwidth: 8 deg, electrical downtilt: 3 deg.Wind survivability: 125 mph, wind loading: 15 lbs. at 100 mph, cross-pol isolation: 25 dB typical, front to-back ratio: 35 dB typical.Max. VSWR: 1.7 : 1.Compatibility: RocketM5 Titanium, RocketM5, RocketM5 GPS.Includes pole mounting kit.Certifications and standards: EN 302 326 DN2, CE, FCC, IC.Weight: 3.25 kg (with brackets).Ubiquiti™ Networks™ airMAX® Variable beam width antenna has a high gain of 17 dBi at 5.45 - 5.85 GHz frequency and is designed for RocketM5 Titanium, RocketM5, RocketM5 GPS.
Ubiquiti introduces the airCube a cost-effective wireless access point for use in your customer deployments. It offers convenient PoE passthrough to power a 24V airMAX CPE device, so you can use a single PoE adapter to power this device. Management options feature a graphical user interface designed for streamlined setup and control. The Ubiquiti airCube can be installed and configured using the UNMS (Ubiquiti Network Management System) app on your mobile phone or tablet. Web UI enables a standalone utility for basic configuration..Home Wi-Fi access point for use in your customer deployments.Dimensions: 3.52"H x 3.46"W x 3.51"D.Designed to interoperate with airMAX CPEs.Comes in black and made of plastic.Features four 10/100 fast Ethernet ports.Wireless speeds of up to 300Mbps in the 2.4GHz radio band.Wi-Fi standard: 802.11n, 2x2 MIMO technology.Its attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.Innovative super antenna provides wide-area coverage beyond regular Wi-Fi access points.Use the intuitive UNMS mobile app for iOS and Android to install and configure the device.Can be powered by and provide power to airMAX CPE using 24V passive PoE or 5V power adapter with Micro-USB (not included).LED lights up when the device is powered on.Meets or exceeds FCC standard.1-year manufacturer limited warranty
Ubiquiti™ Networks™ airMAX? Omni next-gen dual polarity antenna with 10 dBi features QoS priority to voice/video for seamless streaming and creates a powerful basestation. Rocket M antenna measuring 40.6" x 4.8" x 3.3" enhances receiver performance..Frequency: 5.45 - 5.85 GHz.Dimensions: 22.9"(H) x 3.5"(W) x 2.6"(D).Antenna gain: 10 dBi, directivity: Omni directional, frequency band type: SHF.Polarization: Dual linear, Survival wind speed: 2200 in/s.Form factor: Pole.Application/usage: Base station.Features: MIMO technology, weather proof.Intelligent QoS priority is given to voice/video for seamless streaming.High capacity and scalability.Long distance capable of high speed, carrier-class links.Latency multiple features dramatically reduce noise.Compatibility: Ubiquiti RocketM basestation.Includes: Ubiquiti, universal pole mount, rocketM bracket, weatherproof RF jumpers.Certifications and standards: EN 302 326 DN2.Weight: 1.5 lbs..Ubiquiti™ Networks™ airMAX® Omni next-gen dual polarity antenna has a gain of 10 dBi at 5.45 - 5.85 GHz frequency and is ideal for Ubiquiti RocketM basestation.
Compact, ceiling-mounted WiFi 6 AP with 4 spatial streams that improves upon the U6 Lite with higher performance and dual-band WiFi 6 support. Ideal for small and medium-sized businesses..Gigabit Ethernet port for ultra-fast wired network speeds.Up to 10x faster than standard Ethernet connectivity for your wired network.3 Gbit/s wireless transmission speed is ideal for fast data transfer with maximum reliability.Data Encryption feature effectively protects your precious and valuable data from unauthorized access.Wall Mountable form factor for your usage convenience and better reliance.Create a reliable wireless business network with this wireless access point that features a high-speed data transfer rate.IEEE 802.11 a/b/g/n/ac/ax wireless LAN standard ensures trouble-free and convenient connectivity
The Ubiquiti Amplifi™ AFIHD high density router with two mesh point, 1750 Mbps supports data speeds of up to 450 Mbps on 2.4 GHz band and up to 1300 Mbps on the 5 GHz band. With WPA2-PSK AES/TKIP wireless security, this Wi-Fi router ensures greater safety against data theft. This Wi-Fi router measuring 3.91" x 3.85" x 3.92", comes with dual band tri-polarity antenna. The 1.6" 212 ppi diagonal display provides easy access for control menus. Durable plastic enclosure enhances the working life of Wi-Fi router. It includes four Gigabit LAN and three Gigabit WAN interfaces for connectivity..Transfer rate: 1750 Mbps.Interface: Four Gigabit LAN, three Gigabit WAN.Dimensions: 3.91"H x 3.85"W x 3.92"D (router), 9.6"H x 2.13"W x 2.27"D (mesh point).TX power: 26 dBm.Power consumption: 11 W.ESD/EMP protection: +/- 24 kV air/contact.Antennas: Dual band antenna, tri-polarity.Display: 1.6" diagonal, 240 x 240, 212 ppi, G+F touch, full color.802.11ac Wi-Fi standards.Wireless security: WPA2-PSK AES/TKIP.Radios: 2, MIMO chains: 6.Color: White, Material: Plastic enclosure.Operates on the 2.4 GHz band supporting data speeds of up to 450 Mbps and the 5 GHz band supporting data speeds up to 1300 Mbps.Meets FCC, CE and IC certification and standards.Weight: 14.46 oz. (router), 7.9 oz. (mesh point).Ubiquiti Amplifi™ AFIHD high density router with 2 mesh point comes compatible with 802.11a/b/g/n/ac Wi-Fi network standards supporting data speeds of up to 450 Mbps and the 5 GHz band supporting data speeds up to 1300 Mbps.
2x2 MIMO airMAX ac CPE The LiteBeam AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Management Wi-Fi Radio The LiteBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS 8 and airView airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the LiteBeam AC fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Comes with a 24V/0.3A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management radio: 2412-2462MHz.Meets or exceeds the CE, FCC, and IC standards.Operating system: airOS 8.1 Year Warranty
Shielded airMAX CPE With a die-cast aluminum base and interchangeable antenna, the IsoStation is available in two models and brings increased performance to your network using technology that isolates beam communications between your devices. The IsoStation AC delivers throughput speeds of up to 450+ Mbps, and the IsoStation M5 delivers throughput speeds of up to 100+ Mbps. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The IsoStation also gets maximum gain out of the smallest footprint. Beam Performance Perfected The IsoStation can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Enhanced Co-Location Asymmetrical horn antenna options (60 degrees and 90 degrees ) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30 degrees and 45 degrees , the default) are ideal for cluster sector installations with high co-location requirements. Improved Noise Immunity IsoStation blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. High MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Management Wi-Fi Radio The IsoStation AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Interchangeable Isolation Antenna Horn.All-Metal, Shielded Radio Base.airMAX ac Processor for Superior Performance
The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)