Uplink Switches

Upgrade the data paths of your local wired network to information superhighways with 16-port desktop Gigabit PoE switches..Address database size: 8000 MAC addresses.Total number of network ports: 16, number of PoE (RJ-45) ports: 8, number of PoE+ (RJ-45) ports: 8, port/expansion slot details: 16 x Gigabit ethernet network.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Performance: Bandwidth: 32 Gb/s.Status LEDs: Link, speed, activity, and PoE indicators.Form factor: Wall mountable, desktop.Layer supported: 2.Full line rate and forwarding rate of 64B frame at: 1.488 Mpps for 1000M port, 0.1488 Mpps for 100M port, 0.01488 Mpps for 10M port.Power: 54 VDC, 1.66 A, power consumption in idle/use (100% traffic): 4.52 W/11.31 W.Operating temperature: 0 - 50 deg C, operating humidity: 10 - 90% RH.Includes 16 port desktop Gigabit PoE switch, power adapter, quick start guide.Certifications and standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+), FCC Class A, CE.Warranty: Lifetime limited

A network switch is a fundamental hardware device that serves as the central connection point for multiple devices within a local area network (LAN), such as computers, printers, wireless access points, and servers. It acts as an intelligent controller, enabling these connected devices to communicate with each other efficiently and share information. Unlike older networking devices like hubs, which simply broadcast all data to all ports, a switch uses packet switching technology. When a data packet arrives at one of its many ports, the switch examines the packet's destination Media Access Control (MAC) address and intelligently forwards it only to the specific port where the destination device is connected. This directed approach ensures efficient data transfer, boosts overall network performance, and makes effective use of available bandwidth by allowing simultaneous, full-duplex communication. Modern switches often incorporate Power over Ethernet (PoE) technology, which can deliver both data and electrical power over a single Ethernet cable. This capability is highly beneficial for deploying equipment like security cameras, VoIP phones, and IoT sensors in locations where separate power sources are impractical or unavailable. Switches are key building blocks in both small office/home networks and large, complex data centers, facilitating reliable and secure wired connectivity for a vast range of modern applications. Network administrators can manage and configure these devices to set up VLANs, prioritize traffic with Quality of Service (QoS), and implement security features like MAC filtering..The switch includes 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, offering enterprise-grade performance with full Layer 2 and Layer 3 management for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a total power budget of up to 820W, making it ideal for powering IP cameras, wireless access points, and VoIP phones.All 48 ports deliver Gigabit Ethernet connectivity, complemented by 10 Gigabit uplinks through SFP+ slots for high-speed data transfer across demanding applications.Designed as a 1RU rack-mountable switch.Supports SNMP v1, v2c, and v3 protocols, ensuring secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, optimizing traffic for voice, video, and data applications.Management options include Web GUI, CLI, Telnet, and SSH, along with security features such as RADIUS, TACACS+, SSL, and port-based MAC security for enhanced protection.Delivers a switching capacity of 176Gbps and supports operational modes like static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for safe and sustainable operation.5 Years Manufacturer's Warranty

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1/2.5/5GbE BASE-T PoE and 4 x 1/10/25/50G SPF ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 476Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 131-139W with JL086A, JL087A, JL670A PSU; switching capacity: 640Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Class 6 PoE ports supporting up to 60W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

The Lantronix SM48TAT4XA-RP is a versatile Gigabit Ethernet switch designed to meet a range of networking needs. With 48 ports supporting 10/100/1000 (PoE+) and two 10Gb Ethernet SFP+ ports, it offers extensive connectivity options. This switch features a multitude of management protocols including SNMP, Telnet, and CLI for efficient remote management, making it suitable for complex environments. The PoE capabilities, with a budget of 1640 W and support for PoE+, allow for seamless integration with devices such as access points and IP cameras. Built to perform in a wide range of conditions, the SM48TAT4XA-RP operates between 0°C and 50°C with a humidity range of 5 - 90%. Compliance with various standards such as IEEE 802.3 and UL ensures reliable operation and safety. With advanced features including IGMP snooping, VLAN management, and port security, network stability and data integrity are prioritized, making it an option for organizations looking to enhance their network infrastructure..This switch offers 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, delivering enterprise-grade performance with full Layer 2 and Layer 3 management capabilities for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a total PoE budget of up to 820W, making it ideal for powering IP cameras, wireless access points, and VoIP phones.The switch provides Gigabit Ethernet connectivity on all 48 ports and 10 Gigabit uplinks via SFP+ slots, ensuring high-speed data transfer for demanding applications.Features a compact 1RU rack-mountable design, suitable for space-constrained network environments.Supports SNMP v1, v2c, and v3 for secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, ensuring optimized traffic flow for voice, video, and data.Offers comprehensive management options such as Web GUI, CLI, Telnet, and SSH, along with security features like RADIUS, TACACS+, SSL, and port-based MAC security.Delivers a switching capacity of 176Gbps and supports operational modes including static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for sustainable and safe operation.5 Years Manufacturer's Warranty

The Lantronix Transition Networks SM24TAT4XB-EU is a high-performance managed Gigabit Ethernet PoE+ switch designed to meet the demands of enterprise and smart infrastructure environments. Featuring 24 Gigabit RJ-45 ports and 4 dual-speed 1G/10G SFP+ uplink slots, this switch delivers lightning-fast connectivity and exceptional scalability for growing networks. With a 128Gbps switching capacity, it ensures smooth data flow even under heavy loads, making it ideal for IP surveillance, VoIP, and high-bandwidth applications. This switch supports IEEE 802.3at PoE+ and 802.3af PoE, providing up to 370W PoE budget to power cameras, access points, and other devices without additional adapters. Advanced Layer 3 features, VLAN support, QoS, and robust security protocols (SSH/SSL, RADIUS, TACACS+) guarantee secure and efficient network management. The integrated Device Management System (DMS) offers intuitive graphical monitoring, traffic analysis, and troubleshooting tools for simplified administration. Built for reliability, the SM24TAT4XB-EU operates within a wide temperature range and complies with UL, CE, and IEC62368 safety standards. Backed by a 5-Year warranty, this switch is the perfect solution for businesses seeking performance, flexibility, and long-term value..This managed Layer 3 switch features 24 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ slots, delivering enterprise-grade performance with advanced management capabilities via Web GUI, CLI, Telnet, and SNMP v1/v2c/v3.Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ standards with a PoE budget of up to 370W, ensuring reliable power delivery for IP cameras, VoIP phones, and wireless access points.Offers a 128Gbps switching capacity for high-speed data transfer and efficient network performance.Designed in a rack-mountable 1U form factor.Supports SNMP v1/v2c/v3 for comprehensive network monitoring and management, along with LLDP for device discovery.Provides advanced Quality of Service (QoS) with 8 hardware queues, strict priority, and weighted round-robin scheduling for optimized traffic handling.Features robust security including RADIUS, IEEE 802.1X authentication, TACACS+, SSH/SSL encryption, and ACLs for granular access control.Supports IPv4/IPv6 Layer 3 static routing, link aggregation (LACP), VLAN tagging, IGMP snooping, and spanning tree protocols for flexible network configurations.Consumes 44W maximum without PoE and up to 450W at full PoE load, with IEEE 802.3az Energy-Efficient Ethernet for reduced power usage.Complies with UL, CE, FCC Class A, and environmental standards including RoHS, REACH, and WEEE, ensuring safety and sustainability.5 Years Manufacturer's Warranty

HPE Aruba 9000 series gateways provide high-performance networking, SD-WAN and security functionality in compact and cost-effective form factors. Perfectly suited for branch and small campus networks, the 9000 series gateways serve a key role within Aruba's SD-Branch solution, which unifies WLAN, LAN, SD-WAN and security for distributed enterprises. The 9000 Series can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform. Onsite deployment is accomplished with a simple mobile installer application..Rack-mountable switch provides high-performance networking, SD-WAN, and security functionality in compact and cost-effective form factor.Contains 12 100/1000BASE-T ports (six PoE+ ports).Can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform.Provides connectivity for up to 2048 users or client devices at up to 6Gbps of firewall throughput.Dimensions: 1.72"H x 15.55"W x 10.24"D.Maximum power consumption: 160W (with 120W of POE).Meets or exceeds UL, CAN/CSA-C22.2, EN, IEC, FCC, VCCI, FCC/ISED, MIC, NCC, ANATEL, COFTEL, CCC, KN32, KN35 standards.Cloud-managed and purpose-built for branch SDWAN requirements.Up to 10 times the performance and 80 times the client density of typical SD-WAN appliances.Unified policy enforcement for wired and wireless traffic through Aruba Dynamic Segmentation.Visibility into over 3000 applications with no added hardware.Includes flexible connectivity options, with up to 12 Ethernet ports (six PoE+) that can be used as access/WAN uplinks, a USB 3.0 port for cellular connectivity, and an IoT radio that supports Bluetooth 5, Zigbee, and near-field communication (NFC) wireless protocols.Can also be repurposed as Mobility Controllers starting with ArubaOS 8.5 software to provide WLAN and LAN services, such as Dynamic Segmentation, stateful firewall, and live upgrades.Features a Layer 4-7 stateful firewall with PEF to deliver a consistent user, device, and application awareness across WLAN, LAN, and WAN.1-year manufacturer limited warranty

Elevate your business network with the high-performance Lantronix SM48TAT4XA-RP, a versatile managed switch engineered for demanding environments. This robust solution offers an exceptional blend of speed, flexibility, and intelligent power delivery, making it the ideal backbone for modern IT infrastructures. Featuring an impressive 48 Gigabit Ethernet ports (10/100/1000Base-T) with PoE+ capabilities, the SM48TAT4XA-RP simplifies deployment for a wide array of devices, including IP cameras, wireless access points, and VoIP phones, all through a single cable. The substantial power budget (up to 1640 W with dual power supplies) ensures seamless operation across your entire connected ecosystem. Future-proof your network with four dual-speed 1G/10G SFP+ slots for high-speed fiber uplinks, providing scalable bandwidth to meet your evolving needs. Advanced management and security features, including robust authentication (RADIUS, TACACS+), flexible VLAN configurations, and SSH/SSL support, ensure network stability and data integrity are prioritized. Designed for efficiency and reliability, this rack-mountable switch is an essential investment for organizations seeking to enhance performance and streamline network management. Invest in the Lantronix SM48TAT4XA-RP for a powerful, secure, and highly manageable networking foundation..This model provides 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, delivering high-performance connectivity with full Layer 2 and Layer 3 management for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a generous power budget, making it ideal for powering IP cameras, wireless access points, and VoIP phones.All 48 ports offer Gigabit Ethernet speeds, complemented by 10 Gigabit uplinks through SFP+ slots for fast and reliable data transfer across demanding applications.Features a 1RU rack-mountable design, ensuring efficient use of space in enterprise network environments.Supports SNMP v1, v2c, and v3 protocols for secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, ensuring optimized traffic flow for voice, video, and data.Management options include Web GUI, CLI, Telnet, and SSH, along with security features such as RADIUS, TACACS+, SSL, and port-based MAC security for enhanced protection.Delivers a switching capacity of 176Gbps and supports operational modes like static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for safe and sustainable operation.5 Years Manufacturer's Warranty

Expand your network with the UniFi Flex Mini switch, part of the Ubiquiti UniFi Enterprise system. The cost-effective UniFi Switch Flex Mini can be discreetly integrated into any environment. Five RJ45 ports offer 10/100/1000 links. One port also supports 802.3af/at PoE input. The UniFi Flex Mini switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss..Compact five-port layer 2 switch that can be powered with PoE or a USB Type-C adapter (5V).Five RJ45 ports offer 10/100/1000 links; one port also supports 802.3af/at PoE input.Forwarding rate: 7.44Mpps; switching capacity: 10Gbps.Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Uses only 2.5W and can be powered by 802.3af/at PoE or a USB Type-C power adapter (5V, 1A).Meets or exceeds CE, FCC, IC standards.Dimensions: 0.83"H x 4.22"W x 2.76"D.Managed with the UniFi Network application (version 5.12.5 and later).Pack contains five switches

18312606ba85f9c38ee17cfae1fedfb7.Access Control Lists (ACLs).D-Link Safeguard Engine protects the CPU from broadcast/multicast/unicast flooding.Port Security supports up to 64 MAC addresses per port.ARP Spoofing Prevention.Smart IP-MAC-Port Binding.DHCP Server Screening.Web-based Graphical User Interface - Standard Mode or Surveillance Mode.D-Link Network Assistant Utility.Simplified CLI through Telnet.Built-in SNMP MIB for remote NMS (D-View 7.0)

Build and expand your network with the Ubiquiti UniFi Pro Aggregation switch. The UniFi switch is a configurable 10G Layer-3 switch. It offers 28 10G SFP+ fiber links to your devices and 4 25G SFP28 fiber uplink options to your enterprise network. Features a 1.3" touch LCM. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Controller with UniFi Mobile app support, the UniFi Switch offers an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Rack mountable configurable 10G fiber Layer-3 switch.Offers 28 10G SFP+ fiber links to your devices and four 25G SFP28 fiber uplink options to your enterprise network.Managed and configured by the UniFi Controller with UniFi Mobile app support.Offers 380Gbps of total non-blocking throughput, 760Gbps switching capacity, and 565.44Mpps forwarding rate.Dimensions: 1.7"H x 17.4"W x 12.8"D.Max power consumption: 100W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Features 1.3" touch screen with AR switch management.Provides an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server.Made of SGCC steel and comes in silver.2-year manufacturer limited warranty

The EX4100-F-12P, which is a compact, fanless switch offering 12 x 1GbE Power over Ethernet Plus (PoE+) access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter. EX4100-F-12P can also be powered from an external 90W power sourcing equipment (PSE) device connected via the uplink port. Additional 90W of PoE budget is available if the second uplink port is connected to a PSE device. With external power adapter and the two uplink ports connected to 90W external PSE, total PoE power budget supported is up to 300W..Managed switch with 12 x 10/100/1000BASE-T PoE+, 2 x 100Mb/1GbE/2.5GbE/5GbE/10GbE uplinks, 4 x 10GbE stacking/uplink ports, with Standard SW ports.The EX4100-F-12P fanless switch offering 12 x 1GbE PoE+ access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter.Features 256Gbps switching capacity.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Meets or exceeds the CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, and TAA standards.Onboard (day 0), provision (day 1), and manage (day 2+) the EX4100-F from the cloud with Juniper Mist Wired Assurance, using AI-driven automation and insights to deliver improved experiences for IT staff, end users, and connected devices.Streamline IT operations, reduce mean time to repair, and deliver a new generation of wired and wireless networks; the EX4100-F provides rich streaming telemetry data for insights into switch health and wired service-level expectations (SLEs) for pre- and post-connection metrics.Scale with ease, build resiliency, and streamline management with Virtual Chassis and EVPN-VXLAN-based campus fabrics, which help to simplify configuring and maintaining multiple devices.Standards-based micro segmentation using group-based policies (GBP) leverages underlying VXLAN technology to provide agnostic endpoint access control for consistent security policies and granular control of application, business function, or user tags.Take segmentation to the next level by separating traffic within the same VLAN so IoT devices or users can traverse any port or switch within the network; maintain the same security policies without having to manually configure them each time.Enables per-flow level analytics, so you can monitor thousands of traffic flows per switch without impacting the CPU.Dimensions: 1.75"H x 10.59"W x 9.66"D.Lifetime manufacturer limited warranty

The Lantronix Transition Networks SM24TAT4XB-EU is a high-performance managed Gigabit Ethernet PoE+ switch designed to meet the demands of enterprise and smart infrastructure environments. Featuring 24 Gigabit RJ-45 ports and 4 dual-speed 1G/10G SFP+ uplink slots, this switch delivers lightning-fast connectivity and exceptional scalability for growing networks. With a 128Gbps switching capacity, it ensures smooth data flow even under heavy loads, making it ideal for IP surveillance, VoIP, and high-bandwidth applications. This switch supports IEEE 802.3at PoE+ and 802.3af PoE, providing up to 370W PoE budget to power cameras, access points, and other devices without additional adapters. Advanced Layer 3 features, VLAN support, QoS, and robust security protocols (SSH/SSL, RADIUS, TACACS+) guarantee secure and efficient network management. The integrated Device Management System (DMS) offers intuitive graphical monitoring, traffic analysis, and troubleshooting tools for simplified administration. Built for reliability, the SM24TAT4XB-EU operates within a wide temperature range and complies with UL, CE, and IEC62368 safety standards. Backed by a 5-Year manufacturer's warranty, this switch is the perfect solution for businesses seeking performance, flexibility, and long-term value..This managed Layer 3 switch features 24 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ slots, delivering enterprise-grade performance with advanced management capabilities via Web GUI, CLI, Telnet, and SNMP v1/v2c/v3.Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ standards with a PoE budget of up to 370W, ensuring reliable power delivery for IP cameras, VoIP phones, and wireless access points.Offers a 128Gbps switching capacity for high-speed data transfer and efficient network performance.Designed in a rack-mountable 1U form factor.Supports SNMP v1/v2c/v3 for comprehensive network monitoring and management, along with LLDP for device discovery.Provides advanced QoS with 8 hardware queues, strict priority, and weighted round-robin scheduling for optimized traffic handling.Features robust security including RADIUS, IEEE 802.1X authentication, TACACS+, SSH/SSL encryption, and ACLs for granular access control.Supports IPv4/IPv6 Layer 3 static routing, link aggregation (LACP), VLAN tagging, IGMP snooping, and spanning tree protocols.Consumes 44W maximum without PoE and up to 450W at full PoE load, with IEEE 802.3az Energy-Efficient Ethernet.Complies with environmental standards including RoHS, REACH, and WEEE, ensuring safety and sustainability.5 Years Manufacturer's Warranty

The Grandstream GWN7806P is a Layer 2+ managed switch engineered for small-to-medium business networks. It features 48 Gigabit Ethernet RJ45 ports with PoE/PoE+ support and 6 SFP+ uplinks, delivering up to 216Gbps switching capacity. Each port supports up to 30W, with a total PoE budget of 400W, managed via smart power control. The switch includes advanced reliability features like fault detection, dual boot, and link aggregation, along with robust security protocols such as ARP inspection, IP source guard, and DoS protection. With built-in QoS, stacking support for up to 16 switches, and management via GWN.Cloud or GWN Manager, the GWN7806P offers scalable, secure, and intelligent switching for modern enterprise networks..48 Gigabit RJ45 ports and Layer 2+ managed switching for enterprise networks..PoE/PoE+ with smart power control and 30W per port, totaling 400W..216Gbps switching capacity with 6 SFP+ uplinks for high-speed backbone..Mounts on desktop or rack with included installation accessories..Enables SNMP v1/v2c/v3 for remote diagnostics and network monitoring..Prioritizes traffic using advanced QoS with shaping, mapping, and scheduling..Secures networks with ARP inspection, IP guard, DoS protection, and port isolation..Operates with VLANs, link aggregation, and stacking support for up to 16 switches..Uses internal PSU with surge protection and efficient power allocation..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

Expand your network capacity with the help of 8 networking ports and transfer your data quickly and easily.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.Managed switch provides a reliable foundation for your network

Expand your network with the UniFi Flex Mini switch, part of the Ubiquiti UniFi Enterprise system. The cost-effective UniFi Switch Flex Mini can be discreetly integrated into any environment. Five RJ45 ports offer 10/100/1000 links. One port also supports 802.3af/at PoE input. The UniFi Flex Mini switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss..Compact five-port layer 2 switch that can be powered with PoE or a USB Type-C adapter (5V).Five RJ45 ports offer 10/100/1000 links; one port also supports 802.3af/at PoE input.Forwarding rate: 7.44Mpps; switching capacity: 10Gbps.Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Uses only 2.5W and can be powered by 802.3af/at PoE or a USB Type-C power adapter (5V, 1A).Meets or exceeds CE, FCC, IC standards.Dimensions: 0.83"H x 4.22"W x 2.76"D.Managed with the UniFi Network application (version 5.12.5 and later)

The Juniper Networks EX4100 line of Ethernet Switches offers a secure, cloud-ready portfolio of access switches ideal for enterprise branch, campus, and data center networks. The EX4100 switches combine the simplicity of the cloud, the power of Mist AI, and a robust hardware foundation with best-in-class security and performance to deliver a differentiated approach to access switching in the cloud, mobile, and IoT era. With Juniper Mist Wired Assurance, the EX4100 line of Switches can be effortlessly onboarded, configured, and managed from the cloud. This simplifies operations, improves visibility, and ensures a much better experience for connected devices..Managed switch with 48 x 10/100/1000BASE-T PoE+, 4 x 10GbE uplink, and 4 x 25GbE stacking/uplink ports.The EX4100-48P, which offers 48 x 1GbE PoE+ access ports, delivering up to 30W per port with an overall total 1440 W of PoE power budget (using two power supplies).Features 188 Gbps (unidirectional) and 376 Gbps (bidirectional) packet switching capacities.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Power consumption: 920W.Meets or exceeds CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, TAA standards.Switch can be configured to deliver fast PoE capability, which enables the switches to deliver PoE power to connected PoE devices within a few seconds of power being applied to the switch.Switch offers 4 x 1/10GbE small form-factor pluggable plus transceiver (SFP+) fixed uplink ports, and 4 x 10GbE/25GbE SFP28 ports to support Virtual Chassis connections, which can be reconfigured for use as Ethernet ports for uplink connectivity.Features 1.7 GHz ARM CPU, 4GB with Error Correcting Code (ECC) DRAM and 8GB storage.Nonstop bridging and nonstop active routing: NSB and NSR ensure that control plane protocols, states, and tables are synchronized between primary and standby REs to prevent protocol flaps or convergence issues following an RE failover.To avoid the complexities of STP without sacrificing network resiliency, the switch employs redundant trunk groups to provide the necessary port redundancy and simplify switch configuration.Cross-member link aggregation allows redundant link aggregation connections between devices in a single Virtual Chassis configuration, providing an additional level of reliability and availability.IPv4 and IPv6 Layer 3 routing (OSPF and BGP) is available with a Flex license, enabling highly resilient networks.Switch support IEEE 802.1ae MACsec with AES-256-bit encryption to increase security of point-to-point traffic communications, MACsec provides encrypted communication at the link layer that is capable of identifying and preventing threats from denial of service (DoS) and other intrusion attacks.Dimensions: 1.72"H x 17.36"W x 13.78"D.Lifetime manufacturer limited warranty

The Grandstream GWN7813 is a high-performance Layer 3 managed network switch designed for medium-to-large enterprises seeking scalable, secure, and intelligent networking. Equipped with 24 Gigabit Ethernet ports and 4 10G SFP+ uplink ports, it delivers a total switching capacity of 128Gbps and non-blocking throughput of 64Gbps. Advanced features include dynamic routing (RIP, OSPF, BGP), 4K VLAN support, IGMP/MLD snooping, and comprehensive QoS for traffic prioritization. Security is reinforced with ARP inspection, IP source guard, DoS protection, port isolation, and MAC authentication. The GWN7813 supports stacking of up to 4 devices and integrates seamlessly with Grandstream’s GDMS Networking and GWN Manager platforms for centralized cloud or on-premise management. With PoE++ support on ports 1–8, it powers IP phones, cameras, and access points efficiently. Designed for desktop, wall, or rack mounting, and backed by enterprise-grade reliability, the GWN7813 is ideal for building robust business networks..Features 24 Gigabit ports and 4 10G SFP+ uplinks in a managed Layer 3 switch.Powers PoE/PoE++ devices with smart dynamic allocation on ports 1–8.Delivers 128Gbps switching capacity and 64Gbps non-blocking throughput.Mounts easily on desktop, wall, or rack with included hardware.Supports SNMP v1, v2c, and v3 for remote monitoring and diagnostics.Prioritizes traffic using advanced QoS with multiple queue scheduling modes.Secures networks with 802.1X, MAC auth, DoS protection, and DHCP snooping.Enables dynamic routing with RIP, OSPF, BGP, and policy-based controls.Reduces power use with energy-efficient Ethernet and fan/power monitoring.Complies with FCC, CE, RCM, IC, and UKCA certifications for global deployment

Cisco Catalyst 9500 Series switches based on Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) are Cisco's lead fixed enterprise core and aggregation switching platform and as part of the Catalyst 9000 family, are built to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place..Layer 3 managed switch with 48 x 25Gbps Ethernet and 4 x uplink SFP28 ports.1/10/25G Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials with NW Advantage package license.Platinum-rated (greater than 90% efficient) AC and/or DC power supplies.Support Cisco StackWise Virtual technology that increases operational efficiency and boosts nonstop communications and scaled system bandwidth, while multichassis EtherChannel function allows configured across StackWise-Virtual members for high resiliency.Cisco IOSXE operating system for the enterprise provides support for model-driven programmability, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Scalable Layer 3 routing (IPv4, IPv6, and multicast) tables and Layer 2 switching tables.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Equipped with field-replaceable fan-tray units.Lifetime manufacturer limited warranty.Cisco Catalyst 9500 Series 48-Port Multi-Gigabit Ethernet Layer 3 Managed Switch

The EX4000 line of Ethernet access switches offer a Cloud-Native, AI-Native economical solution for access layer deployments in branch and remote offices. Both 1 Gbps and 2.5 Gbps with 802.3at and 802.3bt options are available to provide higher-speed options and PoE options, especially when connecting to Wi-Fi 6E and Wi-Fi 7 access points. As part of the underlying infrastructure for Juniper Mist Wired Assurance, the EX4000 is purpose-built for, and managed by, the cloud. The switches leverage Mist AI to simplify operations and provide better visibility into the experience of connected devices, delivering a simplified, experience-first approach to access layer switching. The Juniper Networks® EX4000 line of switches offers a Cloud-Native, AI-Native portfolio of access switches ideal for enterprise branch, remote office, and enterprise campus networks. EX4000 switches combine the simplicity of the cloud, the power of Mist AI™, and a robust high-performance hardware foundation to deliver a differentiated approach to access switching in the cloud, mobile, and IoT era. With Juniper® Mist™ Wired Assurance, you can effortlessly onboard, configure, and manage EX4000 switches from the cloud. This simplifies operations, improves visibility, and ensures a optimal experiences for connected devices..The Juniper EX4000-48P provides a robust 48 x 1GbE access ports, along with 4 x 10GbE SFP+ uplink ports, and is a manageable, Layer 4 enterprise-class switch designed for high performance in campus and data center access layers.It delivers reliable Power over Ethernet Plus (PoE+) with a substantial 740W power budget to power devices like IP phones and wireless access points, further enhanced by Fast and Perpetual PoE features that ensure continuous power even during a switch reboot.The switch offers high-speed connectivity with 1 Gbps on all access ports and 10 Gbps on its SFP+ uplink and Virtual Chassis ports, supporting a total switching capacity of 176 Gbps (bidirectional).Designed for efficient space utilization, the Juniper EX4000-48P features a compact 1U rack-mountable form factor suitable for standard server racks.The switch is fully manageable and supports the Simple Network Management Protocol (SNMP) for effective network monitoring and management within your existing infrastructure.Comprehensive Quality of Service (QoS) capabilities are embedded to prioritize critical traffic, ensuring guaranteed bandwidth and low latency for performance-sensitive applications like VoIP and video streaming.Featuring AI-native operations through Juniper Mist Wired Assurance for simplified deployment and AI-driven troubleshooting via the Marvis Virtual Network Assistant, the switch also includes robust security features like 802.1X authentication, DHCP snooping, and Access Control Lists (ACLs).It provides a maximum Layer 2 and Layer 3 throughput of 130 Mpps and supports flexible operational modes including standalone use or integration into a 6-member Virtual Chassis for enhanced scalability and simplified management.The EX4000-48P is engineered for operational efficiency with a typical power consumption of only 71 Watts (system power without PoE load) and an energy-efficient design that meets modern sustainability standards.It complies with numerous international certifications and industry standards, including various IEEE 802.3 Ethernet standards, FCC, CE, and RoHS 6, ensuring safety, interoperability, and environmental compliance.The product is backed by an enhanced limited lifetime hardware warranty

UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability..Managed switch contains 8 x 10G SFP+ ports.Rack-mountable with mounting hardware (included).Supports up to 80Gbps of total non-blocking throughput, 160Gbps of switching capacity, and 119.04Mpps of forwarding rate.Maximum power consumption: 30W.Meets or exceeds the CE, FCC, and IC standards.Offers silent fanless cooling operation.Features a 1.3" touch-screen LCM display.Supported voltage range: 100-240VAC.36W AC-powered (power adapter is included).1-year manufacturer limited warranty

The NETGEAR GS108LP is the industry’s first flexible PoE+ 8-Port Gigabit Ethernet plug-and-play switch with 60W PoE budget. The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power they need with interchangeable external power supply and an intuitive power selector. The flexible mounting options (rack-mount, wall-mount or desktop) and the compact and fanless design make the GS108LP an ideal option for any business or home..PLUG AND PLAY-Simple set up with no software or configuration needed.POWER-OVER-ETHERNET-8 Gigabit PoE+ ports with 60w PoE power budget.FLEXIBLE MOUNTING-Rack/Desktop or Wall-Mount to be used in any environment.FUTURE-PROOF POWER- Upgradable PoE budget with Interchangeable power supplies.SMALL AND SILENT-Small and sturdy metal case and fanless quiet operation.ProSAFE Lifetime Protection-Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert

The SW-505-8P-R includes eight 1-Gigabit PoE+ Ethernet ports, two non-PoE Ethernet Ports, and two 1-Gigabit SFP expansion ports. Both 1 Gb SFP ports can be aggregated for a connection speed of up to 2 Gb. The 8 PoE+ ports deliver both gigabit data and power over a single cable to 802.11af/at-compliant devices, with a maximum of 30W per port. For separately powered devices, these ports deliver network connectivity only. The total power budget is 130W for all PoE+ ports combined. The advanced Layer 2/Layer 3 features an easy-to-use management interface that simplifies configuration and make this switch ideal for use in single-switch AVoIP environments. Setup of IGMP/Multicast on a per-port basis is easy, improving the setup and reliability of running audio and video over the network simultaneously. This model also features a fanless design and is perfect for conference rooms, offices, or theaters where silent operation is needed. Watch Video: Meet our SW Series Managed PoE+ Switches.1Gb L2/L3 Managed Switch, EU Power Cord.Dante and AES67 compatibility, AV-over-IP compatible.Dimensions Height 1.75 in, Width 9.52 in Product Weight 5.5 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.802.1Q VLAN and QoS support including DCSP.Dante and AES67 compatibility

27% off  of Netgear Plus 5-Port Gigabit Ethernet Managed Switch, 10/100/1000 Mbps (GS305EPP-100NAS)

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty

748305aacfb94d13fcf70f731a800a0a.Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

Elevate your enterprise network with the Grandstream GWN7822P, a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large businesses. Featuring 24 Gigabit ports—including 8 ultra-fast 2.5G ports—and 4 SFP+ uplinks, it delivers blazing 80Gbps switching capacity for seamless data flow. Smart PoE/PoE+/PoE++ power control supports up to 240W total output, ideal for powering IP phones, cameras, and access points. Advanced security protocols, ACL filtering, and built-in QoS ensure secure, prioritized traffic management. With support for IPv4/IPv6, stacking capabilities, and flexible management via embedded controller, GDMS, CLI, or GWN Manager, the GWN7822P offers unmatched scalability and control..24 Ethernet ports, multi-gigabit speed, and fully managed Layer 3 switching..Powers devices via dynamic PoE/PoE+/PoE++ with up to 240W total output..80Gbps switching capacity for high-speed enterprise networking..Built for rack mounting, ideal for structured and scalable network setups..Enables SNMP v1/v2c/v3 for advanced network monitoring and control..Prioritizes traffic intelligently using built-in Quality of Service (QoS)..Secures access with ACL filtering, 802.1X, MAC auth, and AAA protocols..Supports stacking, link aggregation, and dual boot for resilient operations..Optimizes power use with smart control and optional redundant power supply..Meets FCC, CE, RCM, and IC compliance standards for global deployment.

The Grandstream GWN7831 is a high-performance Layer 3 aggregation switch built for scalable enterprise networks. It features 4 combo Gigabit Ethernet ports, 24 Gigabit SFP ports, and 4 SFP+ uplinks, delivering up to 240Gbps switching capacity. Designed for IPv4/IPv6 environments, it supports dynamic routing protocols, VLAN segmentation, and multicast optimization. Advanced QoS and ACL filtering ensure prioritized traffic flow, while robust security features like ARP inspection, IP source guard, and DoS protection safeguard network integrity. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, the GWN7831 is ideal for medium-to-large deployments requiring intelligent, secure, and high-capacity switching..4 combo Ethernet ports and 24 SFP ports for Layer 3 managed aggregation..240Gbps switching capacity with 4 SFP+ uplinks for peak performance..Mounts on desktop, wall, or rack with included installation hardware..Wired-only design ensures stable connectivity without wireless interference..Enables SNMP v1/v2c/v3 for remote monitoring and diagnostics..Prioritizes traffic using advanced QoS with shaping, mapping, and scheduling..Protects networks with ARP inspection, IP guard, DoS defense, and port security..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Smart power control and supports external redundant PSU for energy efficiency..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

The Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Power over Ethernet Plus (PoE+), 60W Cisco Universal Power over Ethernet (Cisco UPOE) and 90W Cisco UPOE+ ports..Rack mountable switch is stackable enterprise switching platform built for security, IoT, mobility, and cloud.Contains 48 fixed uplink PoE+ and four 10Gb uplink ports.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry.Dimensions: 1.73"H x 17.5"W x 16.1"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.USB 2.0 slot to load system images and set configurations.Up to 480Gbps of local stackable switching bandwidth.Deeper buffer and higher-scale model options for rich multimedia content delivery applications.Leading PoE capabilities with up to 384 ports of PoE per stack, PoE+, and high density IEEE 802.3bt - 60W UPOE, and 90W Cisco UPOE+.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Lifetime manufacturer limited warranty

The SW-505-24P-F includes 24 1-Gigabit PoE+ Ethernet ports, two non-powered Ethernet ports, and two 1-Gigabit SFP expansion ports (SFP and non-powered ethernet ports cannot be used at the same time). Both 1 Gb SFP ports can be aggregated for a connection speed of up to 2 Gb. The 24 PoE+ ports deliver both gigabit data and power over a single cable to 802.11af/at compliant devices, with a maximum of 30W per port. For separately powered devices, these ports deliver network connectivity only. The total power budget is 250W for all PoE+ ports combined. The advanced Layer 2/Layer 3 features a refreshed easy-to-use management interface to simplify configuration and make this switch ideal for use in single-switch AVoIP environments. Setup of IGMP/Multicast on a per-port basis is easy, improving the setup and reliability of running audio and video over the network simultaneously. Watch Video: Meet our SW Series Managed PoE+ Switches.1Gb L2/L3 Managed Switch, 24 PoE+.Dante and AES67 compatibility, AV-over-IP compatible.Dimensions Height 1.75, Width 8.3, Length 17.4 in, Product Weight 6.6 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface.Supports inbound (ingress) ACL filtering.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.52Gbps switching capacity.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Cisco Catalyst 9500 Series switches based on Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) are Cisco's lead fixed enterprise core and aggregation switching platform and as part of the Catalyst 9000 family, are built to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place..Layer 3 managed switch with 24 x 25Gbps Ethernet and 4 x uplink SFP28 ports.1/10/25G Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials with NW Advantage package license.Platinum-rated (greater than 90% efficient) AC and/or DC power supplies.Support Cisco StackWise Virtual technology that increases operational efficiency and boosts nonstop communications and scaled system bandwidth, while multichassis EtherChannel function allows configured across StackWise-Virtual members for high resiliency.Cisco IOSXE operating system for the enterprise provides support for model-driven programmability, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Scalable Layer 3 routing (IPv4, IPv6, and multicast) tables and Layer 2 switching tables.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Equipped with field-replaceable fan-tray units.Lifetime manufacturer limited warranty.Cisco Catalyst 9500 Series 24-Port Multi-Gigabit Ethernet Layer 3 Managed Switch, 2Tbps

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ and four 10Gb uplink ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 11.3"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

The Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Power over Ethernet Plus (PoE+), 60W Cisco Universal Power over Ethernet (Cisco UPOE) and 90W Cisco UPOE+ ports..Rack mountable switch is stackable enterprise switching platform built for security, IoT, mobility, and cloud.Contains 48 fixed uplink PoE+ and four 1Gb uplink ports.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry.Dimensions: 1.73"H x 17.5"W x 16.1"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.USB 2.0 slot to load system images and set configurations.Up to 424Gbps of local stackable switching bandwidth.Deeper buffer and higher-scale model options for rich multimedia content delivery applications.Leading PoE capabilities with up to 384 ports of PoE per stack, PoE+, and high density IEEE 802.3bt - 60W UPOE, and 90W Cisco UPOE+.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Lifetime manufacturer limited warranty

The HP® Aruba 2930F 24-port PoE+ fixed port managed Gigabit Ethernet switch provides high-performance and resiliency for a digital workplace campus network. A powerful Aruba ProVision ASIC delivers performance and value, supporting the latest SDN applications with future proof programmability, as well as it supports 10GbE uplinks, PoE+, robust QoS and RIP routing. The switch provides better application experience with low latency and virtualization. The switch provides you an unmatched quality of service with trusted security that meets corporate policies and compliance requirements. The switch supports Aruba ClearPass policy manager for unified and consistent policy between wired and wireless users with simplified implementation and management for guest login, network access and other network policies..Fixed port managed gigabit Ethernet switch provides a reliable infrastructure for your business network.Dimensions: 4.39 cmH x 44.25 cmW x 30.42 cmD.Compatible with PC.Comes in black color.Memory: 1GB DDR3 SDRAM, buffer memory: 12.38MB 4.5MB Ingress/7.785 Egress, 4GB eMMC, processor: Dual Core ARM Coretex A9 at 1016 MHz.Interfaces/ports: 24 x RJ-45 autosensing 10/100/1000 PoE+ ports, 4 x SFP.Media type supported: Twisted pair, optic fiber, network technology: 10/100/1000Base-T, 1000Base-X.Layer supported: 3.Ethernet technology: Gigabit Ethernet.MAC address table: 32K entries.Throughput: Up to 41.7 Mpps, routing/switching capacity: 56 Gbps.Latency: 1000 Mbps latency: < 3.8 us.Management: Aruba AirWave network management, IMC - Intelligent Management Center, command-line interface, web browser, configuration menu.Power: 120 - 230 VAC 50/60 Hz redundant power supply, PoE capability: 370 W PoE+.Form factor: 1U rack-mountable, Desktop.Includes Aruba 2930F 24G PoE+ 4SFP switch, 1 x power cord, 1 x screw kit, 4 x mounting ears, 4 x bumper feet, 1 x cable tie.Meets FCC part 15 Class A, VCCI Class A, EN 55022 Class A, CISPR 22 Class A, EN 55024, EN 61000-3-2 2000, 61000-3-3, ICES-003 Class A, RoHS standards.Weight: 3.9 kg.Comes with limited lifetime warranty

NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

The Aruba CX 6300 switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation, and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in highspeed uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multigigabit Ethernet for high speed APs and IoT devices..This smart switch contains 48x ports SmartRate 100M/1G/2.5G/5G BaseT, 2x 10G/25G/50G SFP ports, 2x 1G/10G/25G SFP ports (MACSEC).Supports up to 90W PoE per port for a total of 2880W of PoE.Provides high-performance 880 Gbps system switching capacity, 660 Mpps of system throughput and up to 200Gbps stacking bandwidth.Stackable for convenient use.Features SNMP v2c/v3.Supports Layer 3 capabilities with BGP, EVPN, VXLAN, VRF, OSPF with robust security and QoS, MACsec 256, PTP, AVB, LRM.Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.Four built-in QSFP28 ports support speeds of 1GbE, 10GbE, 25GbE, and 50GbE (50GbE for DAC connectivity only) for a total of up to 200 Gbps of stacking throughput per switch.Built-in high-speed 10GbE/25GbE/50GbE uplinks (50GbE for DAC connectivity only) with intelligent monitoring and visibility via Aruba Network Analytics Engine.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN networks.Automatically interrogates and analyzes events that can impact network health.Advanced telemetry and automation provide the ability to easily identify data sheet and troubleshoot network, system, application, and security-related issues easily.Delivers a very low latency, increased packet buffering, and adaptive power consumption

Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network.Built-in power supply to ensure all components are being supplied with accurate voltage

The Grandstream GWN7816P is a high-performance Layer 3 managed switch built for enterprise-grade networks requiring robust PoE capabilities. Featuring 48 Gigabit Ethernet ports and 6 10G SFP+ uplinks, it delivers up to 216Gbps switching capacity and 160.704Mpps forwarding rate for seamless data throughput. With support for IEEE 802.3af/at/bt standards, it offers dynamic PoE/PoE+/PoE++ allocation per port, delivering up to 740W total output—ideal for powering IP cameras, phones, and access points. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your infrastructure, while built-in QoS and ACL filtering ensure optimized traffic control. The GWN7816P supports stacking, dual boot redundancy, and intelligent fan control for enhanced reliability and energy efficiency. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it offers flexible deployment and simplified maintenance for modern business environments..48 Gigabit ports with Layer 3 managed switching for enterprise-grade performance..Supports PoE/PoE+/PoE++ with up to 740W total output across all 48 ports..Mounts on desktop or rail with included front and rear rack kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via EEE ports and smart fan speed control..Complies with FCC, CE, RCM, IC, and UKCA standards for global deployment.

The Grandstream GWN7811 is a high-performance Layer 3 managed network switch designed for small to medium-sized enterprise deployments. Equipped with 8 Gigabit Ethernet ports and 2 10G SFP+ uplinks, it delivers up to 56Gbps switching capacity and 28Gbps non-blocking throughput for seamless data flow. Advanced security features like ARP inspection, IP source guard, and DoS protection ensure robust network defense, while built-in QoS and ACL filtering optimize traffic prioritization and access control. With support for IPv4/IPv6, stacking up to 4 devices, and flexible management via Web GUI, CLI, SNMP, and Grandstream’s cloud platforms, the GWN7811 offers scalable, secure, and intelligent networking. Its compact form factor supports desktop, wall, or rack mounting, making it ideal for versatile installations..8 Gigabit ports and supports Layer 3 fully managed switching..Up to 56Gbps switching and 28Gbps non-blocking throughput..Designed for desktop, wall, or rack mounting with included hardware..Lacks wireless connectivity, offering stable wired networking only..Supports SNMP v1/v2c/v3 for remote monitoring and device management..Enables traffic prioritization with built-in QoS and advanced scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, VLANs, link aggregation, and dynamic routing..Saves energy via EEE ports and intelligent fan speed control..Certified by FCC, CE, RCM, IC, and UKCA for global compliance.

79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

36% off  of Netgear 300 Series 24-Port Gigabit Ethernet Unmanaged Switch, 10/100/1000 Mbps, Black (GS324-200NAS)

Netgear 300 Series Gigabit Ethernet unmanaged switches provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly. Just step up to switch directly to avoid congestion due to stacking up lower port count switches and be ready for future expansion..Unmanaged switch provides easy, reliable, and affordable network connectivity for home and small offices.Contains 24 x 10/100/1000Mbps ports (auto uplink).Non-blocking switching architecture for maximum throughput at wire speed.Dimensions: 1.7"H x 9.9"W x 7.1"D.Power consumption: 12.1W max and 4.33W standby; features energy-efficient technology for power savings.Certifications and standards: Meets or exceeds CE Mark, FCC Part 15 Class A, IC Class A, RCM, VCCI, CB, CE LVD standards.Fanless design for silent operation.Desktop-, wall-, and rack-mountable (rack-mount kit included).Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Auto negotiation for automatic connection at the highest common speed between the switch and end device.802.1p QoS for traffic/frame prioritization.Plug-and-play; no setup required.Durable and rugged metal case for added protection.Standards-based technology ensures interoperability with any standards based devices in the existing network.3-year manufacturer limited warranty

Cisco Catalyst 9200 series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 series switches give you what you need now with investment protection on future innovations..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ 4x1G uplink ports.Supports Cisco IOS XE software that opens a completely new paradigm in network configuration, operation, and monitoring through network automation.Operational efficiency, supporting stacking bandwidth up to 80Gbps.Dimensions: 1.73"H x 17.5"W x 11.3"D.Provides optimum power saving with Energy-Efficient Ethernet (EEE) on the RJ45 ports and low-power operations for the perfect power management and power consumption capabilities.Features 2GB DRAM, 4GB flash memory.Resiliency with field-replaceable units (FRU) and redundant power supply, fans, and modular uplinks.Provides infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond.Offers Gigabit Ethernet speeds with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed; industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic at wire speed.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack; equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Advanced network monitoring using full Flexible NetFlow.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I equipment standards.Lifetime manufacturer limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 24 PoE+ ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 13.8"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE® and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. Catalyst 9200 Series switches also provide operational choice of Cisco DNA Center, or cloud monitoring for Catalyst..This 24 Gigabit Ethernet switch extends the power of intent-based networking and hardware. and software innovation to a broader set of deployments.Full Power over Ethernet Plus (PoE+) capability for up to 48 ports.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.Enhanced security with AES-128 MACsec encryption.Flexible downlink options with data, PoE+, or mGig.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE).Simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network

Cisco Catalyst 9200 Series switches come with modular or fixed uplinks. With modular switches, the field-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond..Spare 4 x 1GE network module for Catalyst 9200 switch.Compatible with Catalyst 9200 series switches; not supported on C9200-24PXG, C9200-48PXG.Comes in silver.Lifetime manufacturer limited warranty

79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The HPE Aruba Networking CX 6200F Switch is perfect for SMB networks, enterprise branch offices and campuses. Created for groundbreaking operational efficiency with built-in automation and analytics, it offers an access layer solution that’s secure and simple. This stackable switch is built with a combination of cutting-edge hardware, analytics, software and automation tools. By combining the Aruba Network Analytics Engine with a fully programmable OS, it brings to the access layer supreme troubleshooting and monitoring capabilities..Features 48 Gigabit Ethernet ports, Gigabit Ethernet performance class, and is a fully managed switch.Supports PoE with a 740W power supply, delivering up to 60W per port across 48 Gigabit Ethernet ports.Data transfer rates of up to 1 Gbps per Ethernet port and 10 Gbps through its SFP+ uplink ports.Rack-mountable form factor and supports virtual stacking for scalable deployments.SNMP v1, v2, and v3 for secure and scalable network monitoring and management.Quality of Service (QoS) features for prioritizing network traffic and ensuring optimal performance.Offers system management with security features like role-based access, ACLs, and centralized monitoring.Delivers high throughput with support for full-duplex, jumbo frames, and operates in Layer 2 and Layer 3 modes.Consumes up to 740W with energy-saving features like port shutdown and dynamic power control.Comes in gray color for better adaption to the space

The Grandstream GWN7816 is a powerful Layer 3 managed switch engineered for high-performance enterprise networks. With 48 Gigabit ports and 6 10G SFP+ uplinks, it delivers up to 216Gbps switching capacity and 160.704Mpps forwarding rate, ideal for demanding data environments. Advanced routing capabilities—including static, dynamic, and policy routing—enable seamless communication across network segments. Built-in QoS, ACL filtering, and multicast support optimize traffic flow and security. The GWN7816 supports stacking, link aggregation, and dual boot redundancy for enhanced reliability. Energy-efficient features like EEE and intelligent fan control reduce power consumption, while IPv4/IPv6 dual stack ensures future-ready connectivity. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, this switch offers scalable control and simplified maintenance. Optional hot-swappable PSU and robust surge protection further reinforce its enterprise-grade resilience..48 Gigabit ports and Layer 3 managed switching for enterprise-grade performance..Up to 216Gbps switching and 160.704Mpps forwarding rate..Mounts easily on desktop or rack with included hardware..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced scheduling and shaping..Secures networks with ACL, 802.1X, MAC auth, and DoS defense..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via EEE ports and smart fan speed control..Complies with FCC, CE, RCM, IC, and UKCA standards.

The HP Aruba 2930M R0M67A switch is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 network switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave and cloud-based Aruba Central. A powerful Aruba ProVision ASIC delivers performance, robust feature Support, and value with flexible programmability for the latest applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The flexible 2930M Supports wire speed 106bE and 4OGbE uplinks, redundant dual modular power supplies for up to 1440 Watts of PoE, and new models with industry standard lEEE 802.3bt Class 6 that provide up to 60W of PoE per port..Switch is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach.Dimensions: 1.73"H x 17.42"W x 12.77"D.Comes in black.Features 10 chassis backplane stacking Static, RIP and access, OSPF routing, Dynamic Segmentation, ACLs, SDN, and robust QoS.Features advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave, and Aruba Central.Features modular 10GbE or 40GbE uplinks and HPE Smart Rate (IEEE 802.3bz) with up to 1440W PoE.Up to 60W PoE per port (IEEE 802.3bt Class 6) for high power devices.Software is defined ready with REST APIs and OpenFlow support.Features simple deployment with Zero Touch Provisioning

Cisco Catalyst 9200 Series switches come with modular or fixed uplinks. With modular switches, the field-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond..Spare 4 x 10GE network module for Catalyst 9200 switch.Compatible with Catalyst 9200 series switches.Comes in silver.Lifetime manufacturer limited warranty