Low-Latency Network Switches

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This switch is a next generation rack mount hardened switch with 136Gbps switching capacity. It provides (24) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports, It has additional (4) 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations..Managed 48-port Gigabit Ethernet switch offers simplicity without compromise: secure, always on, and IT simplified.Switching capacity: up to 176Gbps or up to 256Gbps with stacking.Made in 1U rack mountable form factor.Superior QoS includes granular wireless bandwidth management and fair sharing, 802.1p class of service (CoS) and differentiated services code point (DSCP) field classification, shaped round-robin (SRR) scheduling, committed information rate (CIR), and eight egress queues per port.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE).Network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Cisco IOS XE: a Common licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Perpetual licensing package includes the Network Essentials licensing option that is tied to the hardware.Lifetime manufacturer limited warranty

The Lantronix SM48TAT4XA-RP is a versatile Gigabit Ethernet switch designed to meet a range of networking needs. With 48 ports supporting 10/100/1000 (PoE+) and two 10Gb Ethernet SFP+ ports, it offers extensive connectivity options. This switch features a multitude of management protocols including SNMP, Telnet, and CLI for efficient remote management, making it suitable for complex environments. The PoE capabilities, with a budget of 1640 W and support for PoE+, allow for seamless integration with devices such as access points and IP cameras. Built to perform in a wide range of conditions, the SM48TAT4XA-RP operates between 0°C and 50°C with a humidity range of 5 - 90%. Compliance with various standards such as IEEE 802.3 and UL ensures reliable operation and safety. With advanced features including IGMP snooping, VLAN management, and port security, network stability and data integrity are prioritized, making it an option for organizations looking to enhance their network infrastructure..This switch offers 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, delivering enterprise-grade performance with full Layer 2 and Layer 3 management capabilities for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a total PoE budget of up to 820W, making it ideal for powering IP cameras, wireless access points, and VoIP phones.The switch provides Gigabit Ethernet connectivity on all 48 ports and 10 Gigabit uplinks via SFP+ slots, ensuring high-speed data transfer for demanding applications.Features a compact 1RU rack-mountable design, suitable for space-constrained network environments.Supports SNMP v1, v2c, and v3 for secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, ensuring optimized traffic flow for voice, video, and data.Offers comprehensive management options such as Web GUI, CLI, Telnet, and SSH, along with security features like RADIUS, TACACS+, SSL, and port-based MAC security.Delivers a switching capacity of 176Gbps and supports operational modes including static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for sustainable and safe operation.5 Years Manufacturer's Warranty

Cisco Catalyst C9300-48T-A Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud. The Cisco Catalyst 9300 series switches are Cisco's lead stackable enterprise switching platform. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 series switches form the foundational building block for software-defined access (SD-Access), Cisco's lead enterprise architecture. At up to 480 GB/s, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave 2. It sets new maximums for network scale. These switches are also ready for the future, with a x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud.Comes in gray.At up to 480GB/s, these Ethernet switches are a stacking bandwidth solution with the flexible uplink architecture.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.CPU complex x86 with 8GB memory and 16GB flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB storage with an option SSD drive) to host containers.USB 2.0 slot to load system images and set configurations.Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of fixed or modular uplinks.Leading PoE capabilities with up to 384 ports of PoE per stack, 60W Cisco UPOE, and PoE+.Intelligent power management with StackPower technology providing power stacking among members for power redundancy.Line-rate, hardware-based flexible NetFlow (FNF) delivering flow collection of up to 64000 flows.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.IEEE 802.1BA Audio Video Bridging (AVB) is built in to provide a better audio and video experience through improved time synchronization and QoS.Precision time protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Software-defined access for faster launch of new business services and significantly improved issue resolution time.Customers with the Network Advantage Stack software feature sets are provided with maintenance updates and bug fixes designed to maintain compliance of the software.Lifetime manufacturer limited warranty; 90-day Cisco technical assistance center support

Cisco Catalyst C9200L switch extends the power of intent-based networking and hardware and software innovation to a broader set of deployments. With its family pedigree, Cisco Catalyst C9200L switch offers simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Cisco Catalyst C9200L switch helps customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Cisco Catalyst C9200L switch provides security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Cisco Catalyst C9200L switch gives you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, Layer 3 feature support, and cold patching, Cisco Catalyst C9200L switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..48x 10M/100M/1G Ethernet switch with fixed 4 x 1G uplink ports extends the power of intent-based networking and hardware and software innovation to a broader set of deployments.Dimensions: 1.73"H x 17.5"W x 12.9"D.Comes in gray.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack.Offers resiliency with field-replaceable units (FRU), redundant power supply, and fans.Features flexible downlink options with data, PoE+, or mGig.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Switch has enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Features advanced network monitoring using Full Flexible NetFlow.Get simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE) and network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Common Licensing based operating system for the enterprise (Cisco IOS XE) supports for model-driven programmability and streaming telemetry.ASIC has programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access-control lists (ACLs), and quality of service (QoS) entries.Lifetime manufacturer limited warranty

Elevate your business network with the high-performance Lantronix SM48TAT4XA-RP, a versatile managed switch engineered for demanding environments. This robust solution offers an exceptional blend of speed, flexibility, and intelligent power delivery, making it the ideal backbone for modern IT infrastructures. Featuring an impressive 48 Gigabit Ethernet ports (10/100/1000Base-T) with PoE+ capabilities, the SM48TAT4XA-RP simplifies deployment for a wide array of devices, including IP cameras, wireless access points, and VoIP phones, all through a single cable. The substantial power budget (up to 1640 W with dual power supplies) ensures seamless operation across your entire connected ecosystem. Future-proof your network with four dual-speed 1G/10G SFP+ slots for high-speed fiber uplinks, providing scalable bandwidth to meet your evolving needs. Advanced management and security features, including robust authentication (RADIUS, TACACS+), flexible VLAN configurations, and SSH/SSL support, ensure network stability and data integrity are prioritized. Designed for efficiency and reliability, this rack-mountable switch is an essential investment for organizations seeking to enhance performance and streamline network management. Invest in the Lantronix SM48TAT4XA-RP for a powerful, secure, and highly manageable networking foundation..This model provides 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, delivering high-performance connectivity with full Layer 2 and Layer 3 management for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a generous power budget, making it ideal for powering IP cameras, wireless access points, and VoIP phones.All 48 ports offer Gigabit Ethernet speeds, complemented by 10 Gigabit uplinks through SFP+ slots for fast and reliable data transfer across demanding applications.Features a 1RU rack-mountable design, ensuring efficient use of space in enterprise network environments.Supports SNMP v1, v2c, and v3 protocols for secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, ensuring optimized traffic flow for voice, video, and data.Management options include Web GUI, CLI, Telnet, and SSH, along with security features such as RADIUS, TACACS+, SSL, and port-based MAC security for enhanced protection.Delivers a switching capacity of 176Gbps and supports operational modes like static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for safe and sustainable operation.5 Years Manufacturer's Warranty

+5 to +30 Volt Power Input enables the device to be run from a standard car battery - ideal for in vehicle applications Tough metal casing with removable numbered power terminal for easy wiring Integral DIN mount and slim design provides Ethernet connecti.8 Port 10/100 Mbs Ethernet Switch.Redundant dual power inputs: +5V to +30V DC.Compact design with integral DIN mount.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This Transition Networks Lantronix eight 10/100/1000Base-T port switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks. This switch is a store-and-forward device that offers low latency for high speed networking. It is designed for the core of the network backbone computing environment to solve traffic block problems at SME (small, medium enterprise) businesses..Eight-port 10/100/1000BASE-T switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks.Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations.Power consumption: 3.5W.Meets or exceeds the LVD, FCC, CE, and UL standards.Supports full and half duplex for 10/100Mbps and full duplex for 1000Mbps.Wire-speed packet filtering and forwarding rate.Supports jumbo frames up to 9KB.5-year manufacturer limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 13.8"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

The Lantronix Transition Networks SM24TAT4XB-EU is a high-performance managed Gigabit Ethernet PoE+ switch designed to meet the demands of enterprise and smart infrastructure environments. Featuring 24 Gigabit RJ-45 ports and 4 dual-speed 1G/10G SFP+ uplink slots, this switch delivers lightning-fast connectivity and exceptional scalability for growing networks. With a 128Gbps switching capacity, it ensures smooth data flow even under heavy loads, making it ideal for IP surveillance, VoIP, and high-bandwidth applications. This switch supports IEEE 802.3at PoE+ and 802.3af PoE, providing up to 370W PoE budget to power cameras, access points, and other devices without additional adapters. Advanced Layer 3 features, VLAN support, QoS, and robust security protocols (SSH/SSL, RADIUS, TACACS+) guarantee secure and efficient network management. The integrated Device Management System (DMS) offers intuitive graphical monitoring, traffic analysis, and troubleshooting tools for simplified administration. Built for reliability, the SM24TAT4XB-EU operates within a wide temperature range and complies with UL, CE, and IEC62368 safety standards. Backed by a 5-Year warranty, this switch is the perfect solution for businesses seeking performance, flexibility, and long-term value..This managed Layer 3 switch features 24 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ slots, delivering enterprise-grade performance with advanced management capabilities via Web GUI, CLI, Telnet, and SNMP v1/v2c/v3.Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ standards with a PoE budget of up to 370W, ensuring reliable power delivery for IP cameras, VoIP phones, and wireless access points.Offers a 128Gbps switching capacity for high-speed data transfer and efficient network performance.Designed in a rack-mountable 1U form factor.Supports SNMP v1/v2c/v3 for comprehensive network monitoring and management, along with LLDP for device discovery.Provides advanced Quality of Service (QoS) with 8 hardware queues, strict priority, and weighted round-robin scheduling for optimized traffic handling.Features robust security including RADIUS, IEEE 802.1X authentication, TACACS+, SSH/SSL encryption, and ACLs for granular access control.Supports IPv4/IPv6 Layer 3 static routing, link aggregation (LACP), VLAN tagging, IGMP snooping, and spanning tree protocols for flexible network configurations.Consumes 44W maximum without PoE and up to 450W at full PoE load, with IEEE 802.3az Energy-Efficient Ethernet for reduced power usage.Complies with UL, CE, FCC Class A, and environmental standards including RoHS, REACH, and WEEE, ensuring safety and sustainability.5 Years Manufacturer's Warranty

Cisco Catalyst 9200 series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 series switches give you what you need now with investment protection on future innovations..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ 4x1G uplink ports.Supports Cisco IOS XE software that opens a completely new paradigm in network configuration, operation, and monitoring through network automation.Operational efficiency, supporting stacking bandwidth up to 80Gbps.Dimensions: 1.73"H x 17.5"W x 11.3"D.Provides optimum power saving with Energy-Efficient Ethernet (EEE) on the RJ45 ports and low-power operations for the perfect power management and power consumption capabilities.Features 2GB DRAM, 4GB flash memory.Resiliency with field-replaceable units (FRU) and redundant power supply, fans, and modular uplinks.Provides infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond.Offers Gigabit Ethernet speeds with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed; industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic at wire speed.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack; equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Advanced network monitoring using full Flexible NetFlow.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I equipment standards.Lifetime manufacturer limited warranty

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations..Layer 3 managed switch with 24 x Gigabit Ethernet ports.1/10/1000 Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v1, v2c, v3 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials.Powered by PWR-C6-125WAC power supply.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy solutions.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Cisco IOS XE common licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry.Cloud monitoring for Catalyst on Meraki dashboard function.Lifetime manufacturer limited warranty

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

748305aacfb94d13fcf70f731a800a0a.Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The Cisco Catalyst C9300-48UXM-E switch are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst C9300-48UXM-E switch forms the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst C9300-48UXM-E is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switch is also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Ethernet switch with 48-port modular uplinks and 12 mGig copper ports, UPOE and Network Essentials, built for security, IoT, mobility, and cloud.Dimensions: 1.73"H x 17.5"W x 19.1"D.Comes in gray.Provides up to 480Gbps of local stackable switching bandwidth; equipped with USB 2.0 slot to load system images and set configurations.Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of modular uplinks.Easy transition from 10G to 25G with dual-rate optics.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Support for both static and dynamic NAT and Port Address Translation (PAT).Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.IEEE 802.1ba AV Bridging (AVB) is built in to provide a better audio and video experience through improved time synchronization and QoS.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug-and-Play enabled.Support for AES-256 with the powerful MACsec 256-bit encryption algorithm.Comes with x86 CPU complex with 8GB memory, 16GB of flash, and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an optional SSD drive) to host containers.Features UADP 2.0 application-specific integrated circuit (ASIC) with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access-control lists (ACLs), and quality of service (QoS) entries.Meets or exceeds UL 60950-1, CAN/CSA-C222.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEEE 802.3 standards.Lifetime manufacturer limited warranty

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP+.No. & Type of Ports: 48-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 10.1 x 1.7".Power Consumption: 382 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP.No. & Type of Ports: 52-Port.System Management: Managed.Rack-Mountable Design.Dimensions (H x W x D): 1.7 x 17.3 x 10.1".Power Consumption: 382 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable.Limited Lifetime Warranty.The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP+.No. & Type of Ports: 48-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 10.1 x 1.7".Power Consumption: 41.2 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources..Type of Ethernet Switch: Managed Switch with SFP.No. & Type of Ports: 52-Port.System Management: Managed.Rack-Mountable Design.Dimensions (H x W x D): 1.7 x 17.3 x 10.1".Power Consumption: 36.5 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable.Limited Lifetime Warranty.The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks.

D-Link DGS-1100 series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 series perfect for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Desktop switch offers highly flexible solution for the needs of a diverse range of businesses with support for PoE, advanced management, troubleshooting tools, and energy-efficient technology.Contains eight 10/100/1000Mbps ports (PoE).Supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface.IGMP snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput.Dimensions: 1.1"H x 6.7"W x 3.9"D.Maximum power consumption: 77.9W (PoE on), 4.6W (PoE off).Certifications and standards: Meets or exceeds FCC Class B, CE Class B, VCCI Class B, BSMI, cUL, CE LVD, CB standards.Fanless design for a longer product life and silent operation.Bandwidth Control ensures latency-sensitive traffic always gets the bandwidth it needs.Quality of Service further prioritizes latency-sensitive traffic, ensuring timely delivery.Segregate different types of traffic, such as surveillance or voice, with VLANs to heighten security.PD Alive feature automatically reboots malfunctioning connected PoE devices to mitigate downtime.Innovative energy-saving features are good for your budget, as well as the environment.Equipped with advanced security features, such as static MAC, storm control, and IGMP snooping.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Provides Power over Ethernet (PoE) support, reducing deployment time for IP cameras, VoIP phones, and access points.Can be powered by a PoE switch or injector, allowing for more flexible installation in remote areas with no available power outlets.Comes in black

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 382 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

The EX4000 line of Ethernet access switches offer a Cloud-Native, AI-Native economical solution for access layer deployments in branch and remote offices. Both 1 Gbps and 2.5 Gbps with 802.3at and 802.3bt options are available to provide higher-speed options and PoE options, especially when connecting to Wi-Fi 6E and Wi-Fi 7 access points. As part of the underlying infrastructure for Juniper Mist Wired Assurance, the EX4000 is purpose-built for, and managed by, the cloud. The switches leverage Mist AI to simplify operations and provide better visibility into the experience of connected devices, delivering a simplified, experience-first approach to access layer switching. The Juniper Networks® EX4000 line of switches offers a Cloud-Native, AI-Native portfolio of access switches ideal for enterprise branch, remote office, and enterprise campus networks. EX4000 switches combine the simplicity of the cloud, the power of Mist AI™, and a robust high-performance hardware foundation to deliver a differentiated approach to access switching in the cloud, mobile, and IoT era. With Juniper® Mist™ Wired Assurance, you can effortlessly onboard, configure, and manage EX4000 switches from the cloud. This simplifies operations, improves visibility, and ensures a optimal experiences for connected devices..The Juniper EX4000-48P provides a robust 48 x 1GbE access ports, along with 4 x 10GbE SFP+ uplink ports, and is a manageable, Layer 4 enterprise-class switch designed for high performance in campus and data center access layers.It delivers reliable Power over Ethernet Plus (PoE+) with a substantial 740W power budget to power devices like IP phones and wireless access points, further enhanced by Fast and Perpetual PoE features that ensure continuous power even during a switch reboot.The switch offers high-speed connectivity with 1 Gbps on all access ports and 10 Gbps on its SFP+ uplink and Virtual Chassis ports, supporting a total switching capacity of 176 Gbps (bidirectional).Designed for efficient space utilization, the Juniper EX4000-48P features a compact 1U rack-mountable form factor suitable for standard server racks.The switch is fully manageable and supports the Simple Network Management Protocol (SNMP) for effective network monitoring and management within your existing infrastructure.Comprehensive Quality of Service (QoS) capabilities are embedded to prioritize critical traffic, ensuring guaranteed bandwidth and low latency for performance-sensitive applications like VoIP and video streaming.Featuring AI-native operations through Juniper Mist Wired Assurance for simplified deployment and AI-driven troubleshooting via the Marvis Virtual Network Assistant, the switch also includes robust security features like 802.1X authentication, DHCP snooping, and Access Control Lists (ACLs).It provides a maximum Layer 2 and Layer 3 throughput of 130 Mpps and supports flexible operational modes including standalone use or integration into a 6-member Virtual Chassis for enhanced scalability and simplified management.The EX4000-48P is engineered for operational efficiency with a typical power consumption of only 71 Watts (system power without PoE load) and an energy-efficient design that meets modern sustainability standards.It complies with numerous international certifications and industry standards, including various IEEE 802.3 Ethernet standards, FCC, CE, and RoHS 6, ensuring safety, interoperability, and environmental compliance.The product is backed by an enhanced limited lifetime hardware warranty

Cisco Catalyst 9500 Series switches based on Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) are Cisco's lead fixed enterprise core and aggregation switching platform and as part of the Catalyst 9000 family, are built to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place..Layer 3 managed switch with 24 x 25Gbps Ethernet and 4 x uplink SFP28 ports.1/10/25G Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials with NW Advantage package license.Platinum-rated (greater than 90% efficient) AC and/or DC power supplies.Support Cisco StackWise Virtual technology that increases operational efficiency and boosts nonstop communications and scaled system bandwidth, while multichassis EtherChannel function allows configured across StackWise-Virtual members for high resiliency.Cisco IOSXE operating system for the enterprise provides support for model-driven programmability, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Scalable Layer 3 routing (IPv4, IPv6, and multicast) tables and Layer 2 switching tables.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Equipped with field-replaceable fan-tray units.Lifetime manufacturer limited warranty.Cisco Catalyst 9500 Series 24-Port Multi-Gigabit Ethernet Layer 3 Managed Switch, 2Tbps

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP+.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 23.6 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 18 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE-Compliant Managed Network Switch with SFP.No. & Type of Ports: 16-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 7.9 x 1.7".Power Consumption: 130 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP.No. & Type of Ports: 16-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 8 x 1.7".Power Consumption: 11.4 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Axis Communications industrial PoE switch is a four-port managed industrial PoE Gigabit switch. In addition, the switch is equipped with two RJ45 and two SFP data ports that allows for extra devices to be connected. The ruggedized industrial switch is developed for challenging environments, when mounted inside a surveillance cabinet. Perfect for high demanding installations such as alongside highways and tunnels..Four-port managed industrial PoE gigabit switch is perfect for high-demanding installations, such as alongside highways and tunnels.Full-power PoE switch with a 240W PoE power budget.Four gigabit ports provide a 16Gbps switching capacity to support edge network installations.Comes with an individual password, an easy-to-use setup wizard, and a comprehensive set of configuration tools, such as an integrated DHCP server for automatic assignment of IP addresses.5-year manufacturer limited warranty

The HP J9986A 24-port managed Gigabit Ethernet switch is perfect for data networking and has data transfer rate up to 1 Gbps. It is compatible to use with 5400R zl2 switch series. This switch supports Gigabit Ethernet 1000Base-T technology for reliable data transfer. It includes RJ-45 1000Base-T network LAN ports for connectivity..Gigabit Ethernet switch ensures to provide enterprise-class resiliency and innovative flexibility as well as scalability to mobile-first networks.Dimensions: 1.8"H x 10.3"W x 8.1"D.Compatible with PC.Has 24 RJ-45 autosensing 10/100/1000 PoE+ Gigabit Ethernet ports for connectivity.Features Freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD card and 4GB DDR3 SODIMM for reliable performance.Latency: 1000MB latency: < 2.8 us, 10 Gb/s latency: < 1.8 us, 40 Gb/s latency: < 1.5 us.Throughput: Up to 1142.8 Mpps.Switching capacity: 1920 Gb/s, Switch fabric speed: 2030 Gb/s.PoE+ internal power supply delivers constant power.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T.Form factor: Plug-in module.Contains HP 5412R zl2 switch and three HP 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 module J9986A.REACH and Green compliant.Weight: 45.19 lbs..Comes with lifetime limited warranty

The Aruba CX 6100 Switch Series is a modern family of entry level access switches perfect for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. This layer 2 switch series has convenient built-in high speed uplinks with up to 370W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs.With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements..Simplify IT operations with managed Gigabit Ethernet rack mountable switch that provides entry level, reliable, and convenient wired access connectivity.48 10/100/1000BASE-T port model with 4 convenient built-in 1/10 GbE SFP port uplinks and up to 370W of Class 4 PoE.Flexibility to manage and simplify configurations with Aruba Central, Aruba NetEdit, easy to use Web GUI, or industry standard CLI.Throughput: 98.6Mpps.Dimensions: 1.73"H x 17.4"W x 12"D.Power consumption: 30.6W idle, 45W without PoE, 480W with PoE.Using Aruba AOS-CX operating system across Aruba CX switching platforms and deployment domains provides a simpler, more consistent operator experience.Delivers Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.Simplifies ownership with no switch software licensing or subscriptions required.Designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption

The Aruba 2930M Switch Series is designed for customers creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave. With support from cloud-based Aruba Central, you can quickly set up remote offices with little or no IT support. A powerful Aruba ProVision ASIC delivers performance and value with support of the latest SDN apps with future proof programmability for tomorrow's applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The 2930M supports 10GbE and 40GbE uplinks, Dual Modular Power Supplies, up to 1440 Watts of PoE+, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, robust QoS, RIP, Access OSPF routing, Tunnel Node, PIM, VRRP and IPv6 with no software licensing required. The Aruba 2930M Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Deployment. The switches include a Limited Lifetime Warranty. FEATURES AND BENEFITS: Software-defined networking: OpenFlow supports OpenFlow 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths. Unified Wired and Wireless ?: ClearPass Policy Manager supports unified wired and wireless policies using Aruba ClearPass Policy Manager. Switch auto-configuration automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when an Aruba access point is detected. User role defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using switchbased local user role or download from ClearPass. Tunnel Node provides a secure tunnel that transports network traffic on a per-port or per-user role basis to an Aruba Controller. In a per-user role Tunnel Node, users are authenticated by the ClearPass Policy Manager which directs traffic to be tunneled to an Aruba controller or switch locally. HTTP redirect function supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution. Quality of Service (QoS): Traffic prioritization (IEEE 802.1p) allows real-time traffic classification into eight priority levels mapped to eight queues. Layer 4 prioritization enables prioritization based on TCP/UDP port numbers. Class of Service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ. Rate limiting sets per-port ingress enforced maximums and per-port, per-queue minimums ?. Large buffers Provide graceful congestion management..Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

The Aruba CX 6300 switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation, and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in highspeed uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multigigabit Ethernet for high speed APs and IoT devices..This smart switch contains 48x ports SmartRate 100M/1G/2.5G/5G BaseT, 2x 10G/25G/50G SFP ports, 2x 1G/10G/25G SFP ports (MACSEC).Supports up to 90W PoE per port for a total of 2880W of PoE.Provides high-performance 880 Gbps system switching capacity, 660 Mpps of system throughput and up to 200Gbps stacking bandwidth.Stackable for convenient use.Features SNMP v2c/v3.Supports Layer 3 capabilities with BGP, EVPN, VXLAN, VRF, OSPF with robust security and QoS, MACsec 256, PTP, AVB, LRM.Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.Four built-in QSFP28 ports support speeds of 1GbE, 10GbE, 25GbE, and 50GbE (50GbE for DAC connectivity only) for a total of up to 200 Gbps of stacking throughput per switch.Built-in high-speed 10GbE/25GbE/50GbE uplinks (50GbE for DAC connectivity only) with intelligent monitoring and visibility via Aruba Network Analytics Engine.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN networks.Automatically interrogates and analyzes events that can impact network health.Advanced telemetry and automation provide the ability to easily identify data sheet and troubleshoot network, system, application, and security-related issues easily.Delivers a very low latency, increased packet buffering, and adaptive power consumption

Expand your home or office's network capacity with fast and reliable connections using the MS305 5-Port 2.5Gb Ethernet Unmanaged Switch from Netgear. This unmanaged network switch integrates into your network without requiring any complicated configuring. Its five Ethernet ports each support up to 2.5Gb transfer rates with compatible computers, servers, network storage drives, and other devices. The 25 Gb/s switching capacity and 3.72 Mpps forwarding rate help to ensure smooth data transfers. This compact switch may be mounted onto a desktop or wall, and its fanless design allows it to operate silently in the background..Features 5 Ethernet ports, Multi-Gigabit performance class, and is an Unmanaged Switch.Offers a data transfer rate of up to 2.5Gbps per port.Compact desktop form factor with optional wall-mounting capability.Supports basic QoS (Quality of Service) through 802.1p traffic prioritization.Total switching throughput of 25Gbps and operates in store-and-forward mode.Consumes up to 9.24 watts and supports IEEE 802.3az Energy Efficient Ethernet for reduced power usage during low data activity.Simple set up with no software or configuration needed.Easy monitoring through per port LEDs for port activity and speed.Non-blocking switching architecture for maximum throughput at wire speed.3-Year Limited Warranty

Elevate your enterprise network with the Grandstream GWN7822P, a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large businesses. Featuring 24 Gigabit ports—including 8 ultra-fast 2.5G ports—and 4 SFP+ uplinks, it delivers blazing 80Gbps switching capacity for seamless data flow. Smart PoE/PoE+/PoE++ power control supports up to 240W total output, ideal for powering IP phones, cameras, and access points. Advanced security protocols, ACL filtering, and built-in QoS ensure secure, prioritized traffic management. With support for IPv4/IPv6, stacking capabilities, and flexible management via embedded controller, GDMS, CLI, or GWN Manager, the GWN7822P offers unmatched scalability and control..24 Ethernet ports, multi-gigabit speed, and fully managed Layer 3 switching..Powers devices via dynamic PoE/PoE+/PoE++ with up to 240W total output..80Gbps switching capacity for high-speed enterprise networking..Built for rack mounting, ideal for structured and scalable network setups..Enables SNMP v1/v2c/v3 for advanced network monitoring and control..Prioritizes traffic intelligently using built-in Quality of Service (QoS)..Secures access with ACL filtering, 802.1X, MAC auth, and AAA protocols..Supports stacking, link aggregation, and dual boot for resilient operations..Optimizes power use with smart control and optional redundant power supply..Meets FCC, CE, RCM, and IC compliance standards for global deployment.

The HP® Aruba 2930F 24-port PoE+ fixed port managed Gigabit Ethernet switch provides high-performance and resiliency for a digital workplace campus network. A powerful Aruba ProVision ASIC delivers performance and value, supporting the latest SDN applications with future proof programmability, as well as it supports 10GbE uplinks, PoE+, robust QoS and RIP routing. The switch provides better application experience with low latency and virtualization. The switch provides you an unmatched quality of service with trusted security that meets corporate policies and compliance requirements. The switch supports Aruba ClearPass policy manager for unified and consistent policy between wired and wireless users with simplified implementation and management for guest login, network access and other network policies..Fixed port managed gigabit Ethernet switch provides a reliable infrastructure for your business network.Dimensions: 4.39 cmH x 44.25 cmW x 30.42 cmD.Compatible with PC.Comes in black color.Memory: 1GB DDR3 SDRAM, buffer memory: 12.38MB 4.5MB Ingress/7.785 Egress, 4GB eMMC, processor: Dual Core ARM Coretex A9 at 1016 MHz.Interfaces/ports: 24 x RJ-45 autosensing 10/100/1000 PoE+ ports, 4 x SFP.Media type supported: Twisted pair, optic fiber, network technology: 10/100/1000Base-T, 1000Base-X.Layer supported: 3.Ethernet technology: Gigabit Ethernet.MAC address table: 32K entries.Throughput: Up to 41.7 Mpps, routing/switching capacity: 56 Gbps.Latency: 1000 Mbps latency: < 3.8 us.Management: Aruba AirWave network management, IMC - Intelligent Management Center, command-line interface, web browser, configuration menu.Power: 120 - 230 VAC 50/60 Hz redundant power supply, PoE capability: 370 W PoE+.Form factor: 1U rack-mountable, Desktop.Includes Aruba 2930F 24G PoE+ 4SFP switch, 1 x power cord, 1 x screw kit, 4 x mounting ears, 4 x bumper feet, 1 x cable tie.Meets FCC part 15 Class A, VCCI Class A, EN 55022 Class A, CISPR 22 Class A, EN 55024, EN 61000-3-2 2000, 61000-3-3, ICES-003 Class A, RoHS standards.Weight: 3.9 kg.Comes with limited lifetime warranty

The Aruba CX 6100 Switch Series is a modern family of entry level access switches perfect for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. This layer 2 switch series has convenient built-in high speed uplinks with up to 139W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs. A compact and fanless 12 port model is perfect for use in quiet work spaces. With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements..Simplify IT operations with managed Gigabit Ethernet rack mountable switch that provides entry level, reliable, and convenient wired access connectivity.12 10/100/1000BASE-T port model with 2 convenient built-in 1/10 GbE SFP port uplinks and up to 139W of Class 4 PoE.Flexibility to manage and simplify configurations with Aruba Central, Aruba NetEdit, easy to use Web GUI, or industry standard CLI.Throughput: 45.1 Mpps.Dimensions: 1.73"H x 10"W x 10.04"D.Power consumption: 16W idle, 21.9W without PoE, 170W with PoE.Using Aruba AOS-CX operating system across Aruba CX switching platforms and deployment domains provides a simpler, more consistent operator experience.Delivers Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.Simplifies ownership with no switch software licensing or subscriptions required.Designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption

The Tenda SG108M is an 8-port Gigabit Ethernet switch designed to deliver high-speed, reliable wired connections for small offices, home offices, or any network setup. With its unmanaged switch design, the SG108M offers plug-and-play installation, requiring no advanced configuration to get started. It supports auto-negotiating RJ-45 ports for 10/100/1000 Mbps speeds and features Auto-MDI/MDIX, ensuring seamless compatibility with various devices and cable types. The compact and lightweight design makes the SG108M ideal for both desktop and wall-mounted installations. Its 16 Gbps switching capacity and 11.9 Mpps forwarding rate provide a smooth and efficient data transfer experience, while the 802.1p QoS support ensures prioritized traffic for latency-sensitive applications like video streaming and online gaming. The switch also supports IGMP snooping, optimizing multicast traffic for bandwidth efficiency. Built with energy-saving features, including Energy-Efficient Ethernet (EEE) technology, the SG108M dynamically adjusts power consumption based on link status and cable length, reducing energy usage without compromising performance. Its durable housing and fanless design ensure quiet operation and long-term reliability. Whether expanding an existing network or setting up a new one, the Tenda SG108M delivers fast, stable, and easy-to-use connectivity for a variety of networking needs..The Tenda SG108M features 8 Gigabit Ethernet ports, delivering high-performance connectivity in an unmanaged switch design for effortless plug-and-play operation..Supports a maximum data transfer rate of 10/100/1000 Mbps per port, ensuring fast and stable wired connections for devices..Compact desktop form factor with an option for wall-mounting, providing flexibility in installation and space-saving capabilities..The Tenda SG108M does not include wireless connectivity, offering dedicated wired Ethernet connections only..This switch does not support Simple Network Management Protocol (SNMP), emphasizing simplicity and ease of use..Equipped with 802.1p Quality of Service (QoS) support, the switch prioritizes latency-sensitive traffic for applications such as video streaming and online gaming..Features Auto-MDI/MDIX for automatic detection of cable types and link status monitoring, providing secure and efficient system management..Delivers a throughput capacity of up to 16 Gbps with a forwarding rate of 11.9 Mpps, ensuring high-performance switching in unmanaged mode..Designed with Energy-Efficient Ethernet (EEE) technology, it reduces power consumption by dynamically adjusting based on link status and cable length..Complies with IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards, ensuring compatibility and reliable performance in diverse network environments.