Uplink Switches

Ubiquiti UniFi Switch Pro 48 PoE is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution – it combines up to 600W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 40 Gigabit RJ45 802.3at PoE+ ports, four 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 15.73"D.Max. power consumption (excluding PoE output): 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Comes in silver.2-year manufacturer limited warranty

The Ubiquiti Switch Enterprise has a 124 Gb/s with 62 Gb/s non-blocking throughput and a 92.25 Mpps forwarding rate for smooth data transfers..(12) 2.5 GbE, (12) GbE; all PoE+ ports.(2) 10G SFP+ ports.400W total PoE availability.DC power backup-ready.Layer 3 switching.Remote firmware upgrade.Manage your networks from a single control panel

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Expand your network with the Ubiquiti eight-port layer 2 PoE switch supporting silent fanless cooling. Features four GbE, PoE+ RJ45 ports and four GbE RJ45 ports. Managed with the UniFi Network application: version 7.2.94 and late..Compact eight-port layer 2 PoE switch supporting silent fanless cooling.Features 4 x RJ45 (GbE, PoE+) ports and 4 x RJ45 (GbE) ports.Total non-blocking line rate: 8Gbps.Max power consumption: 8W.Meets or exceeds CE, FCC, IC standards.Power adapter included (54VDC, 1.1A).Maximum PoE+ wattage per port by PSE: 30W.Dimensions: 1.25"H x 6.44"W x 3.92"D.Managed with the UniFi Network application (version 7.2.94 and later).Wall-mountable (kit is included)

Cisco Catalyst C9200L switch extends the power of intent-based networking and hardware and software innovation to a broader set of deployments. With its family pedigree, Cisco Catalyst C9200L switch offers simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Cisco Catalyst C9200L switch helps customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Cisco Catalyst C9200L switch provides security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Cisco Catalyst C9200L switch gives you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, Layer 3 feature support, and cold patching, Cisco Catalyst C9200L switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..48x 10M/100M/1G Ethernet switch with fixed 4 x 1G uplink ports extends the power of intent-based networking and hardware and software innovation to a broader set of deployments.Dimensions: 1.73"H x 17.5"W x 12.9"D.Comes in gray.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack.Offers resiliency with field-replaceable units (FRU), redundant power supply, and fans.Features flexible downlink options with data, PoE+, or mGig.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Switch has enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Features advanced network monitoring using Full Flexible NetFlow.Get simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE) and network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Common Licensing based operating system for the enterprise (Cisco IOS XE) supports for model-driven programmability and streaming telemetry.ASIC has programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access-control lists (ACLs), and quality of service (QoS) entries.Lifetime manufacturer limited warranty

The Cisco Catalyst C9300-48UXM-E switch are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst C9300-48UXM-E switch forms the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst C9300-48UXM-E is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switch is also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Ethernet switch with 48-port modular uplinks and 12 mGig copper ports, UPOE and Network Essentials, built for security, IoT, mobility, and cloud.Dimensions: 1.73"H x 17.5"W x 19.1"D.Comes in gray.Provides up to 480Gbps of local stackable switching bandwidth; equipped with USB 2.0 slot to load system images and set configurations.Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of modular uplinks.Easy transition from 10G to 25G with dual-rate optics.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Support for both static and dynamic NAT and Port Address Translation (PAT).Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.IEEE 802.1ba AV Bridging (AVB) is built in to provide a better audio and video experience through improved time synchronization and QoS.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug-and-Play enabled.Support for AES-256 with the powerful MACsec 256-bit encryption algorithm.Comes with x86 CPU complex with 8GB memory, 16GB of flash, and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an optional SSD drive) to host containers.Features UADP 2.0 application-specific integrated circuit (ASIC) with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access-control lists (ACLs), and quality of service (QoS) entries.Meets or exceeds UL 60950-1, CAN/CSA-C222.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEEE 802.3 standards.Lifetime manufacturer limited warranty

Ubiquiti UniFi Switch Lite 16 PoE is a fully managed Layer 2 switch with sixteen Gigabit Ethernet ports for your RJ45 Ethernet devices. Eight ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 45W for UniFi Access Points or other PoE devices. Managed and configured by the UniFi Network application with UniFi mobile app support, the UniFi Switch Lite 16 PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Fully managed layer 2 switch with 16 Gigabit Ethernet ports for your RJ45 Ethernet devices.Dimensions: 1.72"H x 7.55"W x 7.28"D.Comes in white.16 Gigabit RJ45 ports including eight 802.3at PoE+.Managed with UniFi application.60W power supply.Wall-mountable (kit included)

The Ubiquiti USW Enterprise 48 PoE switch is a fully managed switch with 48 of 2.5GbE, PoE+ RJ45 ports and four 10G SFP+ ports, and a 720W total PoE supply. Along with its Layer 3 functionality, this switch offers an extensive suite of Layer 2 switching protocols, including port-specific operation modes (switching, mirroring, or aggregate). The USW Enterprise 48 PoE also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights. Additionally, the USW Enterprise 48 PoE offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app..Fully managed switch offers an extensive suite of advanced Layer 2 switching protocols, including port-specific operation modes (switching, mirroring, or aggregate).Layer 3 switch with 48 auto-sensing 2.5GbE RJ45 ports that can deliver 802.3af/at PoE+ to Wi-Fi 6 access points, as well as four 10G SFP+ ports to supply you with additional BER uplink options.Forwarding rate: 238.09Mbps; switching capacity: 320Gbps.Dimensions: 1.7"H x 17.4"W x 15.7"D.Offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately).Max power consumption: 150W.Meets or exceeds CE, FCC, IC standards.Features a 1.3" LCM color touch screen that concisely displays key system and connection insights.Power method: universal AC input, 100-240VAC, 10A max, 50/60Hz; USP-RPS DC input, 52VDC, 13.84A; 11.5VDC, 13A.Maximum PoE+ wattage per port by PSE: 34.2W.Can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Ubiquiti UniFi configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1 Gigabit links to your devices and fiber uplink options to your enterprise network. It features a 1.3" touch LCM, a nd a fanless design. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Network Controller a nd mobile app, the UniFi switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1Gbps links to your devices and fiber uplink options to your enterprise network.48 gigabit ports provide a 52Gbps switching capacity.Rack-mountable for convenient use.Works with the UniFi Network Application.Meets or exceeds CE, FCC, IC standards.Features a 1.3" LCM color touch screen with AR switch management

Expand and power your network with the UniFi PoE switch, part of the Ubiquiti UniFi Enterprise System. The UniFi PoE switch features fanless, silent thermal cooling, so it can be deployed in areas where fan noise would be distracting..This smart switch contains 32 x Gigabit RJ45 ports with 802.3af/at, 16 x Gigabit RJ45 ports, and 4 x 1G SFP ports.PoE support simplifies your network infrastructure and cabling; PoE ports offer 802.3af/at to power your PoE devices, such as UniFi APs and cameras.Provides up to 104Gbps of switching capacity.Rack-mountable for convenient use.UniFi Network Controller can provision UniFi devices, map out networks, and quickly manage system traffic. Important network details are logically organized for a simplified, yet powerful, interface.Maximum power consumption: 45W.Meets or exceeds CE, FCC, IC standards.Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.SFP ports enable network uplinks up to 1Gbps.Features a 1.3" LCM color touch screen with AR switch management.2-year manufacturer limited warranty

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The NanoSwitch is an outdoor, four-port Gigabit switch with PoE pass-through. It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The NanoSwitch is designed for outdoor deployment and supports up to 4Gbps total, non-blocking line rate..Unmanaged switch with four Gigabit Ethernet ports.One Gigabit 24V passive PoE in port and three Gigabit 24V passive PoE out ports.Total non-blocking line rate: 4Gbps.Dimensions: 7.73"H x 3.68"W x 1.28"D.Maximum power consumption: 30W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Featuring a durable, weatherproof form factor, switch is great for outdoor deployment; made of white polycarbonate.Can be easily mounted on a pole or wall.1-year manufacturer limited warranty

The 4-port Amer Networks 10/100M Desktop PoE Switch provides a seamless network connection, integrating 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. Cost saving and flexible with PoE power provision, the SD4P4U provides a PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices. The switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power..Expand your network capacity with the help of 9 networking ports and transfer your data quickly and easily.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Featuring Fast Ethernet ports to speed up the transfer rate up to 100mb/sec of large files and digital assets across your network.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.The unmanaged switch provides a quick, easy and cost-saving way to add wired networking to your home, office or small business; no intervention needed.Under-table mounting allows you to keep your table tidy and organized.Certifications and standards: CE, FCC

Ubiquiti UniFi switch Pro is a fully managed Layer 3 switch with 48 Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi switch Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi switch Pro is perfect aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed switch features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.Contains 48 10/100/1000 RJ45 ports and four 1/10G SFP+ Ethernet ports Ethernet In-Band.UniFi Controller allows configuring: operation mode (switching, mirroring, or aggregate) per port, network/VLAN configuration, jumbo frame and flow control services, network settings, etc..Dimensions: 1.72"H x 17.42"W x 11.24"D.Maximum power consumption: 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Passive cooling design allows the switch to be located in any workspace.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Offers Layer 3 capabilities, such as inter-VLAN routing, static routing, and DHCP server functionality.Features the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.OS support: Linux, Mac OS X, or Microsoft Windows 7/8/10.Pack includes: switch, two rack-mount brackets, eight bracket screws, four mounting screws, four cage nuts, power cord, four rubber feet.2-year manufacturer limited warranty

The Netgear brings the first Unmanaged Multi-Gigabit PoE++ switch MS108UP with 60W per port Ultra60 PoE++ technology, great for powerful PoE++ installations with PoE budgets up to 230W, a compact size, plug-and-play installation, and reliable performance at affordable prices. The new model MS108UP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE), providing up to 60W/port. The new switch model can power devices such as VoIP phones, surveillance IP cameras, wireless access points, and many other applications. This new Unmanaged switch provides PoE Auto-Balance to help automatically balance the PoE power based on the device needs independent of PoE class detected. With the growing deployment of applications and an all-in-one solution, providing multi-speed and high power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated, non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can power and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop or mount it to your wall with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Eight ports of multi-gigabit 1G/2.5G speeds to connect devices instantly and give them each exactly the speed they need: 1G or 2.5G automatically.Unique PoE Auto-Balance technology automatically balances the PoE power based on the device's needs independent of PoE class detected.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design makes this switch perfect for noise-sensitive environments.Easy monitoring through per-port LEDs for port activity and speed.Simple, yet useful network set-up on top of plug-and-play connectivity.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty

A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output..48-port, Layer 3 Etherlighting switch with 2.5 GbE and PoE++ output.Supports Power over Ethernet.Offers 166.66Mpps forwarding rate, 224Gbps switching capacity, and 112Gbps total non-blocking throughput.Rack-mountable.Managed with UniFi Network 8.0.24 and later.Maximum power consumption: 100W (excluding PoE output).Contains 16 2.5 GbE ports including eight PoE+ and eight PoE++, 32 GbE ports including 24 PoE+ and eight PoE++, four 10G SFP+ ports.Etherlighting ports that illuminate to indicate port location, speed/link, and native VLAN/network.1.3" touch-screen LCM display for convenient use.Provides 720W total PoE availability.DC power backup ready.Meets or exceeds CE, FCC, IC standards

Ubiquiti UniFi is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. Features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. FP ports enable network uplinks of up to 1 Gbps. The UniFi PoE Switch features fanless, silent thermal cooling, so it can be located in any workspace..Configurable Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and two SFP ports.Contains 24 10/100/1000 RJ45 ports and two 1G SFP Ethernet ports.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features.Dimensions: 1.72"H x 16.71"W x 7.87"D.Max. power consumption (excluding PoE output): 18W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Quiet cooling for any workspace.SFP ports enable network uplinks of up to 1 Gbps.Features fanless, silent thermal cooling, so it can be deployed in areas where fan noise would be distracting..Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Comes in silver.2-year manufacturer limited warranty

The Ubiquiti UniFi Dream Machine Pro is an all-in-one network appliance for a scalable network in an office, retail, or hospitality environment. UDM-Pro integrates all current and upcoming UniFi controllers with a security gateway, 10G SFP+ WAN, 8-port GbE switch, and off-the-shelf 3.5" HDD support. Powered by a fast 1.7GHz quad-core processor, the UDM Pro combines multiple functions into a single device. The UDM Pro includes the UniFi network controller so you can manage your UniFi switches and APs. It can also run the UniFi Protect software for convenient monitoring and complete management of your camera surveillance system..All-in-one network appliance for a scalable network in an office, retail, or hospitality environment.IDS/IPS throughput: 3.5Gbps.Interfaces: 8 x 10/100/1000 RJ45 LAN ports, 1 x 10/100/1000 RJ45 WAN port, 1 x 1/10G SFP+ LAN port, and 1 x 1/10G SFP+ WAN port.Dimensions: 1.72"H x 17.42"W x 11.24"D.Rack-mountable, features 1U form factor.Combines UniFi OS with 8-port switch and security gateway.Offers UniFi Protect video surveillance NVR with off-the-shelf 3.5" HDD support.Provides enterprise-class IPS/IDS, DPI, and Wi-Fi AI capabilities.Powered by fast 1.7GHz quad-core processor.On-board flash storage: 16GB eMMC.Power consumption: 33W maximum.Power method: universal AC input, 100-240VAC, 50/60Hz; redundant power: RPS DC input; power supply: internal 50W/12V.Operating temperature: 14 to 104 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Package contents: Dream Machine Pro, two rackmount brackets, eight bracket screws, four mounting screws, four cage nuts, one security screw, four 2.5" HDD screws, power cord, and four rubber feet.Meets or exceeds FCC standard

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Build and expand your network with the Ubiquiti UniFi Flex switch, part of the UniFi Enterprise System. The UniFi switch is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports, providing 1 PoE input and 4 PoE output links to your devices. The Ubiquiti UniFi Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE, USW-Pro-24-PoE, US-XG-6POE, and USW-Industrial switches, sold separately) as power source, USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options. Managed and configured by the UniFi Controller or UniFi Mobile app, the Ubiquiti UniFi Flex switch offers basic Layer 2 switching protocols and features. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features using a graphical user interface from anywhere..Managed switch is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE.Features 5 x Gigabit RJ45 ports to deliver robust performance and intelligent switching for your network; port 1 provides PoE input while ports 2-4 offer 802.3af PoE.Managed and configured by the UniFi Controller or UniFi Mobile app, switch offers basic Layer 2 switching protocols and features.Can be installed horizontally or vertically and offers versatile mounting options: desktop, wall, and pole.Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Maximum power consumption: 5W (excluding PoE output).Meets or exceeds the CE, FCC, IC standards.Weather-resistant switch can withstand extreme temperature variations.Supports up to 5Gbps of total non-blocking throughput.Dimensions: 4.66"H x 2.48"W x 1.36"D.1-year manufacturer limited warranty

Ubiquiti USW-WAN is a managed switch designed for high-performance networks with high requirements. With 1 RJ45 1GbE port and 3 SFP ports , it provides flexibility and high throughput, ideal for a variety of network applications. With 10Gbps band width support and reliable integration with UniFi Network, this device will meet the needs of professional environments. Ubiquiti USW-WAN has 1 RJ45 1GbE port and 3 SFP ports , providing flexibility in the choice of network connections. With SFP ports , the switch supports 10G speeds, making it ideal for extended networks requiring high bandwidth. The manageable switch allows you to configure and manage your network easily and quickly. The switch offers power redundancy with two AC inputs, which increases the reliability of the device, ensuring network continuity even in the event of a power failure. The 100-240V AC-based power supply makes the device suitable for a variety of environments. The Ubiquiti USW-WAN is a solution that ensures stability and uninterrupted operation in professional networks. The Ubiquiti USW-WAN integrates seamlessly with the UniFi Network system, enabling full network management. With the UniFi system, you gain access to advanced features such as monitoring and configuration of the device and network. The manageable switch makes network administration easy, and thanks to its intuitive interface, configuration is quick and simple. The Ubiquiti USW-WAN is made of sturdy SGCC steel material, which ensures durability and resistance to mechanical damage. The unit weighs just 2.3 kg with mounting brackets, making it easy to mount in a rack. The managed switch is also equipped with ESD/EMP surge protection, which ensures the longevity of the device and increases network security..The switch features 1 Gigabit Ethernet RJ45 port and 3 high-speed 10G SFP+ ports, delivering enterprise-grade performance with full Layer 2 managed capabilities for seamless integration into UniFi Network environments.Enjoy non-blocking throughput of 10 Gbps and a switching capacity of 20 Gbps, ensuring fast and efficient data handling for demanding network applications.Designed for professional setups, the switch comes in a compact 1U rack-mountable form factor, making it ideal for data centers and enterprise environments.Manage the device easily via UniFi Controller, with advanced security features like ESD protection (±16kV air, ±22kV contact) and redundant power inputs for uninterrupted operation.The switch offers carrier-grade throughput with 15 Mpps forwarding rate, supporting Shadow Mode High Availability for linking dual UniFi Gateways to a single ISP.With a maximum power draw of only 13W, the switch is energy-efficient while providing dual AC inputs for redundancy and reliability.Comes with a standard 2-year warranty

Cisco Catalyst C9300-48T-A Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud. The Cisco Catalyst 9300 series switches are Cisco's lead stackable enterprise switching platform. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 series switches form the foundational building block for software-defined access (SD-Access), Cisco's lead enterprise architecture. At up to 480 GB/s, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave 2. It sets new maximums for network scale. These switches are also ready for the future, with a x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud.Comes in gray.At up to 480GB/s, these Ethernet switches are a stacking bandwidth solution with the flexible uplink architecture.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.CPU complex x86 with 8GB memory and 16GB flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB storage with an option SSD drive) to host containers.USB 2.0 slot to load system images and set configurations.Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of fixed or modular uplinks.Leading PoE capabilities with up to 384 ports of PoE per stack, 60W Cisco UPOE, and PoE+.Intelligent power management with StackPower technology providing power stacking among members for power redundancy.Line-rate, hardware-based flexible NetFlow (FNF) delivering flow collection of up to 64000 flows.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.IEEE 802.1BA Audio Video Bridging (AVB) is built in to provide a better audio and video experience through improved time synchronization and QoS.Precision time protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Software-defined access for faster launch of new business services and significantly improved issue resolution time.Customers with the Network Advantage Stack software feature sets are provided with maintenance updates and bug fixes designed to maintain compliance of the software.Lifetime manufacturer limited warranty; 90-day Cisco technical assistance center support

Ubiquiti UniFi switch Pro is a fully managed Layer 3 switch with 24 Gigabit Ethernet ports. Four Two 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi switch Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi switch Pro is perfect aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed switch features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.Contains 24 10/100/1000 RJ45 ports and two 1/10G SFP+ Ethernet ports Ethernet In-Band.UniFi Controller allows configuring: operation mode (switching, mirroring, or aggregate) per port, network/VLAN configuration, jumbo frame and flow control services, network settings, etc..Dimensions: 1.72"H x 17.42"W x 11.24"D.Maximum power consumption: 30W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Passive cooling design allows the switch to be located in any workspace.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Offers Layer 3 capabilities, such as inter-VLAN routing, static routing, and DHCP server functionality.Features the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.OS support: Linux, Mac OS X, or Microsoft Windows 7/8/10.Pack includes: switch, two rack-mount brackets, eight bracket screws, four mounting screws, four cage nuts, power cord, four rubber feet.2-year manufacturer limited warranty

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Ubiquiti UniFi Pro is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 16 802.3at (PoE+) Gigabit Ethernet ports. Two 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution it combines up to 400W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 16 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 16 Gigabit RJ45 802.3at PoE+ ports, two 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 11.24"D.Max. power consumption (excluding PoE output): 50W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The TRENDnet TPE-TG240G Ethernet switch is a rack mountable switch that has sturdy metal construction. It has 24 Gigabit PoE+ ports and works on 370 W power. It includes LED indicators to indicate port status. All Gigabit ports generate a 48 Gbps switching capacity and have jumbo frames up to 10KB..Managed Gigabit Ethernet switch.24 ports, 24 x PoE+ (RJ-45), 24 x Gigabit Ethernet network.Dimensions: 1.7"D x 17.3"W x 9.8"D.Power: 120 - 230 VAC (input voltage), power source: Power supply, PoE budget: 370 W, power consumption: 36 W.Meets CE, FCC standards.Media type supported: Twisted pair, network technology: 10/100/1000Base-T, Ethernet technology: Gigabit Ethernet.Layer supported: 2.Form factor: Rack-mountable, desktop.Network standard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x.Jumbo frame: 10KB, MAC address: 8K entries, switching capacity: 48 Gbps.PoE circuit sorting protection, PoE overcurrent protection, rugged.Includes TPE-TG240g, quick installation guide, rack mount kit, power cord.Weight: 8 lbs..Comes with lifetime limited warranty

EX2300 and EX2300-C Ethernet Switches deliver a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. Featuring a small, 1U footprint, the EX2300 and EX2300-C are ideal for access-layer deployments in micro branches, retail and workgroup environments, and converged network access in larger networks. The EX2300 offers 24 10/100/1000BASE-T ports in a single platform, while the EX2300-C offers 12 10/100/1000BASE-T ports. Both models are available with or without IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering attached network devices. Optional front panel 10GbE uplink ports support connections to higher-layer devices. Both models support Juniper's unique Virtual Chassis technology, enabling up to four of the switches to be interconnected and managed as a single device. Both models can also act as satellite devices in a Juniper Junos Fusion Enterprise deployment, which combines large numbers of access switches into a logical management platform..Features 12 networking ports to easily establish a local network or expand your existing one.Cascade to other network devices through the uplink port to expand your local area network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network

The Transition Networks® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.

The USW-Pro-XG-8-PoE offers eight (8) multi-speed 10GbE RJ45 ports with PoE++ support, delivering a total PoE budget of 155W — ideal for powering next-generation access points, IP cameras, and other high-performance devices. The two (2) 10G SFP+ ports provide robust fibre uplink options, while Etherlighting technology enables intuitive port status monitoring to streamline troubleshooting. With a 200 Gbps switching capacity and 149 Mpps forwarding rate, this switch is engineered for low-latency, high-throughput environments. It supports up to 1,000 VLANs and a MAC address table of 32,000 entries, handling complex network configurations with ease. Layer 3 features such as inter-VLAN routing, DHCP server and relay, and static routing provide advanced traffic segmentation and control. The rugged SGCC steel enclosure, fanless design, and compact desktop or wall-mountable form factor make it ideal for office, studio, or edge deployments. Fully integrated with the UniFi Network Application, the USW-Pro-XG-8-PoE offers centralised configuration, monitoring, and firmware updates across your UniFi deployment, simplifying day-to-day operations and scaling..This switch features 8 x 10G RJ45 PoE++ ports and 2 x 10G SFP+ uplink ports, delivering enterprise-grade Layer 3 management for advanced routing and VLAN configurations.It supports PoE++, providing up to 60W per port with a total PoE budget of 155W, ideal for powering access points, cameras, and other high-demand devices.The switch offers a switching capacity of 200 Gbps, non-blocking throughput of 100Gbps, and a forwarding rate of 149Mpps, ensuring ultra-fast data handling for demanding networks.Designed as a compact desktop or wall-mountable unit, it combines professional-grade performance with space-saving flexibility.While primarily a wired solution, it seamlessly integrates with UniFi wireless access points via PoE++, enabling a unified wired and wireless network infrastructure.The switch supports SNMP for network monitoring and management, making it suitable for enterprise environments requiring centralized control.Advanced Quality of Service (QoS) features, including DSCP and Pro AV profiles, ensure optimized traffic prioritization for voice, video, and critical applications.It offers robust security with 802.1X authentication, DHCP snooping, MAC-based ACLs, and IP-based isolation, along with UniFi Network software for centralized management.Supports Layer 3 functionality, including DHCP server, inter-VLAN routing, and static routing, enabling advanced network segmentation and control.The switch consumes 61W without PoE and up to 220W with PoE output, powered by an external AC/DC adapter, ensuring efficient energy use for high-performance operations.Comes with a 2-year manufacturer warranty

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 48 x 1/2.5/5GbEBASE-T PoE and 4 x 1/10/25/50G SPF ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 654Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Power consumption: 193-201W with JL086A, JL087A, JL670A PSU; switching capacity: 880Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Class 6 PoE ports supporting up to 60W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

The D-Link eight-port 10/100/1000 gigabit/fast Ethernet switch plugs into your network and gives you the power to connect a range of devices from IP cameras and phones to printers and wireless access points. The switch is built with eight different ports, so you can expand your network with multiple wired connections. With its fast Ethernet technology, the switch enables high performance without sacrificing speed or throughput..8 Ports - 4 x POE - 4 x RJ-45.10/100/1000Base-T - PoE Ports.Interfaces/ports: 4 x Network (RJ-45), 4 x PoE (RJ-45), 8 x gigabit Ethernet network.192KB buffer.Data transfer rate: 2000 Mbps (full-duplex).Filtering address table: 4K MAC entries/device.Power: 100 - 240 VAC, power consumption: 63.2 W(max).Dimensions: 1.5"(H) x 7.5"(W) x 4.7"(D).Media type supported: Cat 5 twisted-pair.Switching capacity: 16 Gbps.LED indicators:/port: Link/Activity/Speed/PoE Status,/device: power/PoE Max.Network technology: 10/100/1000Base-T Gigabit Ethernet.Layer supported: 2, Form factor: Desktop.Jumbo frame support: 9720.Features auto-negotiation, auto-uplink, cable diagnostics function, d-link green technology, flow control, packet filtering, quality of service (qos), store and forward.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, LVD.Warranty: Lifetime limited.1 1/2"(H) x 7 1/2"(W) x 4.7"(D).Limited lifetime warranty.D-Link Eight-Port 10/100/1000 Gigabit/Fast Ethernet Switch - Robust Networking

The HP® 2930F 24G 4SFP manageable layer 3 switch has uplink port, 24 RJ-45 ports, four SFP ports and one serial console for connectivity. It works with PC. It measures 1.72" x 17.42" x 7.88". This rack-mountable switch supports twisted pair as well as optical fiber media, Gigabit Ethernet technology and 1000Base-X as well as 10/100/1000Base-TX network technology. It has AirWave network management, intelligent management center, command-line interface, web browser, configuration menu, SNMP manager, Telnet, RMON1 and FTP management. It comes with one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie..Manageable layer 3 switch offers an affordable solution for businesses of all sizes that requires simple network management.Dimensions: 1.72" x 17.42" x 7.88".Compatible with PC.Color: Black.Interface: Uplink port, modular, 24 x RJ-45, four SFP and one serial (console).Media type supported: Twisted pair, optical fiber, Layer supported: Three, Network technology: 1000Base-X, 10/100/1000Base-TX.Standards: IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, Jumbo frame size: 9220, Throughput: 41.7 Mpps.Management feature: AirWave network management, IMC - intelligent management center, command-line interface, web browser, configuration menu.MAC address table size: 32K entries, IPv4 routing table entries: 10000, IPv6 routing table entries: 5000.Authentication method: CHAP, PAP, RADIUS, TACACS and TACACS+.Memory and processor: Dual core ARM Coretex A9 at 1016 MHz, 1GB DDR3 SDRAM, Packet buffer size: 12.38MB 4.5MB Ingress/7.875MB Egress, 4GB eMMC.Operating temperature: 32 to 113 deg F, Storage temperature: -40 to 158 deg F, Operating humidity range: 15 - 95% (non-condensing).Form factor: 1U rack-mountable and desktop.Power source: Internal power supply, Nominal voltage: 120 VAC, Power consumption operational: 29.3 W.Contains switch, one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie.Meets REACH, 80 PLUS Silver, CISPR 22 Class A, CISPR 24, CNS 13438, CSA C22.2 No. 60950-1-07, VCCI Class A certifications and standards.Weight: 5.31 lbs..Comes with lifetime limited warranty

The unmanaged switch offers gigabit speeds to minimize transfer times and greatly enhance the ability to stream high-bandwidth files to connected devices without interference. PoE support lets you deploy network systems such as wireless access, IP telephony, or video surveillance solutions more quickly and at a lower cost, without having to install separate power supplies for individual devices..8-ports 10/100/1000Base-T gigabit Ethernet.Address database size: 8000 entries.Unmanaged switch.Interface/ports: 4 x PoE (RJ-45), 4 x PoE+ (RJ-45).Layer supported: 2.Form factor: Desktop, wall mountable.Dimensions: 1"(H) x 8.3"(W) x 4.1"(D).Input voltage: 54 VDC.Power consumption: 7 W.Media type supported: Twisted pair.Temperature: 0 - 50 deg C, Humidity: 10 - 90 % non-condensing.Easy plug and play connection.Wired connection speed up-to 1000 Mbps.Includes 8-port desktop gigabit PoE switch, power adapter, quick start guide.Certifications and standards: FCC class A, CE, 802.3/U/x/ab/az/af/at.Weight: 1.23 lbs..Warranty: Lifetime limited

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 13.8"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

The Grandstream GWN7700MP is a high-performance 5-port 2.5G unmanaged network switch designed for home offices and small-to-medium businesses that demand fast, reliable connectivity. It features five multi-Gigabit RJ45 ports supporting 100/1000/2500Mbps speeds and one SFP+ fiber port offering 1G or 10G uplink capability. With IEEE 802.3af/at-compliant PoE on four ports, it powers IP phones, cameras, and access points directly through Ethernet. The fanless metal enclosure ensures whisper-quiet operation, while auto MDI/MDIX and auto-negotiation simplify setup. Advanced features like QoS, storm control, and energy-efficient Ethernet optimize performance and reduce power consumption. Wall or desktop mountable, the GWN7700MP is a plug-and-play solution for multi-Gigabit networking with smart PoE support..Supports 5 Ethernet ports with multi-gigabit speed and unmanaged switch configuration.Powers up to 4 devices via IEEE 802.3af/at-compliant PoE output.Delivers up to 2.5Gbps per port and 10Gbps via SFP+ uplink.Designed for desktop or wall mounting with compact metal housing.Prioritizes traffic using default strict QoS for smoother performance.Enables auto-negotiation, auto MDI/MDIX, and storm control for secure operation.Handles 45Gbps switching capacity with full-duplex and jumbo frame support.Reduces energy use with IEEE 802.3az energy-efficient Ethernet technology.Meets FCC, CE, RCM, and IC compliance standards for global use

The Grandstream GWN7813P is a high-performance Layer 3 managed switch designed for medium-to-large enterprise networks. Featuring 24 Gigabit Ethernet ports with PoE++ support and 4 10G SFP+ uplinks, it delivers up to 128Gbps switching capacity for seamless data flow. Smart power control enables dynamic PoE allocation per port, with a total budget of 360W and up to 60W per port. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your network, while built-in QoS and ACL filtering optimize traffic prioritization. The GWN7813P supports IPv4/IPv6 routing, stacking, and is managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms. Its versatile mounting options and robust design make it ideal for scalable, secure, and intelligent business deployments..24 Gigabit ports and Layer 3 managed switching for enterprise-grade control..Enables dynamic PoE++ allocation with up to 60W per port and 360W total power budget..Up to 128Gbps switching capacity and supports 4 high-speed 10G uplinks..Suitable for desktop, wall, or rack mounting with included installation accessories..Supports SNMP v1/v2c/v3 for remote monitoring and network diagnostics..Prioritizes traffic using advanced QoS with shaping, scheduling, and rate limiting..Secures networks with ARP inspection, IP guard, DoS defense, and port isolation..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Optimizes energy use with smart power control and efficient fan speed adjustment..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

Boost your small business or home office network with the NETGEAR GS108PP 8-Port Gigabit Ethernet Unmanaged Switch, delivering reliable plug-and-play connectivity with 8 high-speed Gigabit ports and a total of 123W PoE+ power - ideal for powering IP cameras, VoIP phones, wireless access points, and other PoE-enabled devices. Housed in a durable metal casing and designed for silent operation, this compact switch supports desktop or wall-mount placement, making it perfect for noise-sensitive environments. With energy-efficient technology, lifetime limited hardware warranty, and no software configuration required, the GS108PP offers a hassle-free, cost-effective solution for expanding your wired network with maximum performance and minimal effort..PLUG AND PLAY - Simple set up with no software or configuration needed.POWER-OVER-ETHERNET - 8 Gigabit PoE+ ports (802.3af and 802.3at) providing up to 30w per port with 120w total PoE power budget.FLEXIBLE MOUNTING – Rack ,Desktop or Wall-Mount to be used in any environment.FLEXIBLE POWER - Interchangeable External Power Supply (60W, 90W, 120W) that allows to increase or decrease your PoE Budget.SMALL AND SILENT - Small, sturdy metal case and fanless quiet operation.ProSAFE Lifetime Protection - Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Introducing the industry’s first flexible PoE+ 8-Port Gigabit Unmanaged Switch

This Transition Networks Lantronix eight 10/100/1000Base-T port switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks. This switch is a store-and-forward device that offers low latency for high speed networking. It is designed for the core of the network backbone computing environment to solve traffic block problems at SME (small, medium enterprise) businesses..Eight-port 10/100/1000BASE-T switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks.Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations.Power consumption: 3.5W.Meets or exceeds the LVD, FCC, CE, and UL standards.Supports full and half duplex for 10/100Mbps and full duplex for 1000Mbps.Wire-speed packet filtering and forwarding rate.Supports jumbo frames up to 9KB.5-year manufacturer limited warranty

Cisco Catalyst 9300 switches are stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Cisco Catalyst 9300 switches form the foundational building block for Software-Defined Access (SD-Access). They are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. TCisco Catalyst 9300 is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Stackable enterprise switching platform built for security, IoT, mobility, and cloud.Features 48-port 1G copper with fixed 4x10G SFP+ uplinks, PoE+ Network Advantage.Uses Encrypted Traffic Analytics (ETA), AES-256 MACsec encryption, IPSec encryption, Trust Anchor Technologies, and Umbrella DNS Integration.Dimensions: 1.73"H x 17.5"W x 17.7"D.Maximum power consumption: 715W; switching capacity: 176Gbps.Certifications and standards: Meets or exceeds UL 60950-1, CAN/CSA-C222.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEEE 802.3 standards.Accelerate changes with programmability, supporting open standards and APIs.Detect and stop threats, even with encrypted traffic.Simplified automation and assurance: goal-based policies are created once centrally, applied network-wide.Features x86 CPU complex with 8GB memory, and 16GB of flash and external USB 3.0 SSD pluggable storage slot (delivering up to 240GB of storage with an optional SSD drive) to host containers.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Lifetime manufacturer limited warranty