Vertiv Geist

Ensure efficient supply of power to a compatible module with the Vertiv Power Supply. This PSU is designed for use with the MPUIQ-SRL serial module..Power supply support up to four MPUIQ-SRL modules.Package includes: IEC adapter and four output cables.Black

Power surges and the sudden loss of power can damage computers, televisions, and other electronics. Power strips are only equipped with handling protection from power surges. It does not protect against brownouts, blackouts or other power fluctuations. If you want the ultimate protection of household or business electronics, you need the Liebert PSA5 Battery Backup to protect against power supply interruptions. The Energy Star certified PSA5-1500 is an economical, line-interactive UPS battery backup technology designed with the features you need for reliable power protection for small office/home office computers, network gear, and home entertainment equipment. Designed with easy controls for user friendly operation, the Liebert PSA5 provides ample run time to save work in progress and shutdown your equipment in an orderly fashion. With built in USB port, included USB cable and with available MultiLink shutdown software you can receive remote alerts and complete an unattended orderly shutdown of your systems..Has AVR to extend battery life; USB communications for notifications and controlled shutdown with free software download.With 10 outlets (5 surge only and 5 battery & surge outlets, 2 for transformer-block plugs) and 2 USB Charging Ports.Use LCD Display to monitor run time, load capacity, battery status and input/output voltage and frequency.This Energy Star certified UPS meets eco-friendly requirements.Has 3-year full unit coverage including battery with advanced replacement

APC® Basic power distribution unit featuring NEMA 5-20R outlet connector can be 1U horizontal rack mounted and includes rack mounting brackets. Unit offers NEMA L5-20P input connections and has input current rating of 20 A..NEMA L5-20P 12' 20 A 100 - 120 V input.120 V 50/60 Hz output.Outlet connector: 10 NEMA 5-20R.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mrf. warranty.APC® AP9564 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

APC® Basic power distribution unit offers NEMA L6-30P input connections and has input current rating of 30 A. Unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A..NEMA L6-30P 12' 30 A 200 - 230 V input.208 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13.Overload protection: 24 A.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets, user manual.Enables a quick recovery from overload events.5 - 95% operating relative humidity.5 - 95% s-rage relative humidity.Operating/storage elevation: 0 - 15000'/0 - 50000'.Certifications: cUL listed, CSA, PSE, UL 60950, UL listed, RoHS complaint.Weight: 5.6 lbs..Dimensions: 1.73"(H) x 17.52"(W) x 3.03"(D).2 years limited Mrf. warranty.APC® AP9571A Basic Power Distribution Unit provides reliable power distribution via a single input with multiple output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.

This 1U rackmount power distribution unit (PDU) provides unfiltered power distribution to 10 NEMA 5-15 receptacles from a UPS system, generator, or utility power source. Designed for electrically demanding IT or industrial environments, the CPS1215RM has durable metal housing and network-grade plugs and outlets. A 15-foot AC power cord allows the PDU to be placed where it's needed and a cord retention tray secures power cords, keeping them organized and accessible. The CPS1215RM Basic PDU also comes with a three-year warranty..Rack Mountable (1U) PDU that delivers AC power to servers, equipment, and connected devices..Input voltage: 120 VAC, 50Hz/60Hz.Power capacity: 1.8 kVA, 15-Amp electrical capacity with circuit breaker.Product Dimensions are 17.25"W x 1.75"H x 4.75"D with a Cord Length of 15 ft (4.5 m)..This PDU has a Nominal Input Voltage of 100 VAC - 125 VAC and uses an input plug type NEMA 5-15P..Output voltage: 120 VAC (60 Hz)Plug/connector type: NEMA 5 15P straight, Receptacles: 10 x NEMA 5 15R (Output).Meets or exceeds UL & RoHS.Provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or humming that occurs over telephone lines or stereo electronics.Warranty: 3 Year Limited Warranty.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RM unit, warranty card/manual.Weight: 4.90 lbs..Deliver reliable power to multiple devices with the CPS1215RM Basic PDU from CyberPower, your trusted ally in power.

TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers reliable Rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure Rackmount installation with included mounting accessories..Single phase NEMA 5-15/20P / NEMA L5-20P / NEMA L6-20P / IEC-320 C14/C20 10 ft 16 A 100 - 240 V input.100 - 240 V 50/60 Hz output.12 IEC-C13, 2 IEC-C19 outlet connector.16 A overload protection.1U horizontal rack mount.Package includes 1U rack mount PDU, 1U rack mount PDU, Set of 5 plug adapters, user manual with warranty information.Back panel grounding lug.14 outlets (4 C13 front-facing/2 C19 and 8 C13 rear-facing).Rack mount, vertical rack mount, wall mount/under-counter style.Form factors supported: 1U rack mount, 0U vertical mount, wall mount and under-counter mounting supported.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Ideal for network power distribution in datacenters, computer rooms and network closets.Pack of 5 included C19 adapters with locking retainer clip enables plug conversion to C14 (connects to C13 100-240V), L6-20P (connects to L6-20R 20A 208/240V), L5-20P (connects to L5-20R 20A 120V), 5-20P (connects to 5-20R 20A 120V) and 5-15P (connects to.Outlets center to center measurement: Distance between front (C13) outlets = 28.75mm, distance between rear (C19) outlets = 55mm, distance between rear (C13) outlets = 28.75mm.Certifications: Tested to UL60950-1 (USA), CSA (Canada), CE (EU).3.2 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/4"(D).Lifetime limited warranty.Space saving, ultra-compact housing with support for wall-mount, desktop or floor placement; built-in grounding lug.6' power cord; USB cable included.TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

Eaton Metered Input ePDUs provide remote monitoring of the current draw of individual sections via network communication. This capability, combined with state-of-the-art software allows you to aggregate the information from many ePDUs in one location. A local display is also available for phase balancing and for easy start-up and provisioning of servers. New ePDU G3 Metered Input models feature best-in-class technologies, including ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter and the ability to daisy chain four ePDUs to share the same network connection and IP address..Network (RJ-45): Yes.Input Voltage: 230 V AC.Output Voltage: 230 V AC

The Tripp Lite PDUV30HV 5/5.8 kW single-phase basic PDU supports 30 A maximum capacity at 208/240 V. It features 10' attached line cord with L6-30P input plug and 32 C13 as well as six C19 outlets that support up to 38 directly connected pieces of networking equipment. Switch-free unfiltered electrical pass-through of this PDU, distributes UPS or generator power to critical networking equipment. This PDU has circuit breaker to protect from overloads and short circuit fault conditions. It comes with mounting brackets for vertical installation in standard 2 and 4 post racks or other surfaces..Single phase NEMA L6-30P 10 ft 30 A 208/240 V input.208/240 V 50/60 Hz output.6 IEC-C19, 32 IEC-C13 outlet connector.Outlets are arranged in two separately breakered load banks each with 15 A overload protection.0U vertical rack mount.Package includes PDUV30HV 63.75 inch basic PDU with owner's manual, set of 2 plug retention brackets and installation hardware, set of mounting brackets and installation hardware.Maximum input amps (A) details: Agency de-rated to 24A.Sleeved circuit breaker assembly prevents accidental shutoff and requires no tools to reset if tripped.Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment.Included cord retention brackets keep vital network equipment plugged in and continuously powered.Toolless mounting supported in button-mount compatible racks.Included nut and bolt mounting brackets support installation in non button-mount compatible racks and other flat surfaces.Vertical rack mount, wall mount, raceway, workbench style.Form factors supported: 0u vertical installation in equipment racks, plus under-counter and wall mount.Typical applications: Ideal for network configurations where a basic non-metered, unswitched PDU is required to distribute UPS or generator power to multiple pieces of networking equipment.Certifications: Tested to UL60950-1 (USA, Canada), NOM (Mexico).8 lbs.63 3/4"(H) x 2 1/4"(W) x 3 3/4"(D).Lifetime limited warranty.TRIPP LITE IEC-C13/IEC-C19 32/6 Outlet 30 A 208 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

The Vertiv Liebert PD5-004 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT5 5-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance and replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD5-004 is a plug-and-play unit that will replace the existing POD box on the back of our UPS. It has two NEMA L5-30R and four NEMA 5-20R output connectors and is equipped with a NEMA L14-30P input connector..Power output distribution unit with UPS maintenance bypass feature.Avoid intiating unnecessary downtimes while conducting UPS maintenance.Easy plug-and-play deployment to ensure continuous uptime of your network even during UPS maintenance.Output: Two (2) NEMA L5-30R, Four (4) NEMA 5-20R.Input: NEMA L14-30P

The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.

The Vertiv Liebert PD5-003 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT5 5-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance and replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD5-003 is a plug-and-play unit that will replace the existing POD box on the back of our UPS. It has two NEMA L6-30R and four NEMA 5-15/20R output connectors and is equipped with a NEMA L14-30P input connector..Power output distribution unit with UPS maintenance bypass feature.Avoid intiating unnecessary downtimes while conducting UPS maintenance.Easy plug-and-play deployment to ensure continuous uptime of your network even during UPS maintenance.Output: Two (2) NEMA L6-30R, Four (4) NEMA 5-15/20R.Input: NEMA L14-30P

Schneider® AP8931 APC® Electric Switched rack power distribution unit with 8 outputs reduce circuit overload during power recovery. Enables power on/off functionality for power recycling to remotely reboot equipment. Includes ultra low profile circuit breakers, real power monitoring, a temperature/humidity sensor port and locking IEC receptacles. Has a nominal input voltage rating of 100/120 V and frequency rating of 50/60 Hz. Operates at a temperature range of -5 to 45 deg C..Power distribution unit enable advanced, user-customizable power control and active monitoring.Measures 988 mm x 55 mm x 46 mm.Comes in black color for new look.Features input voltage rating of 100V, 120V and input frequency of 50/60 Hz for reliable operation.Output voltage rating of 100 V, 120 V and 8 x NEMA 5-15R output connections.Remotely manage outlets so users can turn outlets off.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space.Full-featured network management interfaces that offer standards-based management via Web.Operating environment of -5 - 45 deg C, operating relative humidity of 5 - 95% and operating elevation of 0-3000 meters for better performance.Alarm threshold avoids overloaded circuits.Aggregate current draw per rack PDU is displayed on the unit via a digital display.Power delays allow users to configure the sequence in which power is turned on or off for each outlet.LED indicator indicates overload and warning conditions based on the user-defined alarm thresholds.Easily upgrade firmware via network download for future product enhancements.Integrates with StruxureWare data center expert for added flexibility.Single input power source supplies power from one branch whip to multiple pieces of equipment.Meets cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL certification and standards.Weighs 4.16 KG.Comes with 2 years limited warranty.Schneider® Electric Switched rack power distribution unit allows active monitoring and user-customizable power control. Has a nominal output voltage rating of 100/120 V.

The Vertiv Liebert GXT5 UPS, with a capacity of 2000VA/1800W, is a 2U compact and efficient UPS solution for ensuring the health and availability of IT infrastructure. With online, double conversion technology, the Vertiv Liebert GXT5 UPS protects critical equipment against outages and every type of power disturbance without drawing on battery power, extending battery life and minimizing replacements..6-Outlet on-line double conversion UPS solution which offers premium power outage protection and continuous power conditioning in a compact and flexible rack/tower form factor.Reliable, easy-to-manage power protection and battery backup with 2000VA (1800W) capacity..4 hours charge time to 90% capacity after a complete discharge with full load connected.120VAC (user configurable: 110V, 115V, 120V, 125V) output voltage, 50/60Hz, single-phase, 2 wire-plus-ground.Made in 2U rack-mountable form factor.Utilizes valve-regulated, non-spillable, lead acid cells battery.User-friendly interface that includes color graphic display with gravity sensing feature.Remote management capabilities support real-time environmental monitoring and alarm notifications.Supports SNMP, web, and environmental sensors with included RDU101 communications card.Individually programmable output power receptacles.Rack / tower convertible systems.Hot-swappable internal battery and scalable power with auto-detection of external battery cabinets.2019 ENERGY STAR 2.0 certification and high operating efficiency in standard and eco-mode.Meets or exceeds ANSI C62.41 Category B/ ISTA Procedure 1A / UL 1778 4th Edition and CSA 22.2 No 107.3/ FCC Part 15 (Class A) - CISPR22 Class A (RFI)/ WEEE and ROHS2 REACH standards.3-year manufacturer limited warranty

STARTECH.COM® 5-15 8 Outlet 15 A 120 V Power Distribution Unit delivers a cost-effective power distribution solution for your server rack/cabinet. The 1U PDU can be mounted horizontally in any server rack 19 in depth or greater, to provide eight 120V 15A power ports/outlets, and features a rugged steel casing to ensure maximum durability. The front of the PDU features two LEDs to indicate proper ground and surge detection while enabling you to control the power state with an illuminated power/reset switch. To prevent costly breakdowns of connected devices, the rackmount PDU features a built-in circuit breaker and reset switch, ensuring dependable performance of vital equipment..6 ft 15 A 120 V input.120 V 60 Hz output.8 NEMA 5-15 outlet connector.1U rack mount.Package includes 1 - 8 port power distribution unit, 1 - installation document.Maximum 15 A total current draw per phase.Solid steel chassis for durability.LED indicators for ground and surge detection.Illuminated reset and power switch.Meets ANSI/EIA RS-310-D standards.Built in circuit breaker.Indicator type (led): 1 - ground, 1 - surge.Regulatory derated input current (north America): 12 A.Applications: 16 easily accessible power outlets in a compact 1U of rack space, Localize the power control for all of your connected system.Certification: RoHS compliant, UL listed.4.5 lbs.1.7"(H) x 19"(W) x 3.8"(D).2 years warranty.STARTECH.COM® 5-15 8 Outlet 15 A 120 V Power Distribution Unit is made of rugged steel casing, and built in circuit breaker to ensure maximum durability.

N/A. This rack-mount PDU features eight C13 outlets and you can install it into 1U of rack space to power your rack-mount equipment. The PDU provides 16 amps of power to be shared across the eight outlets.Sleek, professional installationUnlike some rack power solutions that mount awkwardly, if at all, this rack-mount PDU is EIA-310D compliant, which ensures a secure and tidy installation into any 19" rack with 1U of available space. Mounting screws and cage nuts are also included to ensure you have everything you need, saving you time and hassle.Flexible power solutionFor maximum compatibility with your devices, this PDU features C13 outlets which are ideal for a wide range of globally distributed devices including I.T equipment, office equipment, measuring instruments and medical devices. Plus, with a total of eight C13 outlets, the PDU can distribute power to your entire rack.Protects your equipmentIn the event of random energy surges that can occur during power outages or other anomalies, this PDU prevents costly damages to your equipment with a built-in dual circuit breaker, ensuring your equipment is protected.The housing of this PDU is also constructed of rugged steel to provide maximum durability in any environment.The PDU08C13H is backed by a StarTech.com 2-year warranty and free lifetime technical support..Ensure hassle-free installation with a 1U EIA-310D compliant PDU.Get wide device compatibility with a PDU that features C13 outlets.10 ft. (3 m) C19 to NEMA5-20p power cord included.Protect your equipment with the dual circuit breaker that's built into this PDU.Solid steel chassis for durability.1U rack-mount design

A mini-tower UPS with line interactive topology, the CyberPower PFC Sinewave CP850PFCLCD provides battery backup (using sine wave output) and surge protection for desktop computers, workstations, networking devices, and home entertainment systems requiring active PFC power source compatibility. The CP850PFCLCD features an advanced multifunction control panel with a color LCD to quickly confirm status and alerts at-a-glance. The screen tilts for easy viewing when the UPS is placed in a low position such as under a desk. The CP850PFCLCD uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. The CP850PFCLCD comes with a three-year warranty (including coverage of batteries) and a $250,000 Connected Equipment Guarantee..Line-interactive UPS protects electronic equipment with 10 outlets for seamless connectivity.Power Capacity: 850VA; Output Power Capacity: 510 W.Surge energy rating: 1150 Joules.Provides USB connectivity for maximum flexibility.6.56' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.External form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds UL 1778, FCC Class B, cUL 107.3, and RoHS standards.Dimensions: 9.7"H x 3.9"W x 10.2"D.3-year manufacturer limited warranty