Vertiv Geist

Ensure efficient supply of power to a compatible module with the Vertiv Power Supply. This PSU is designed for use with the MPUIQ-SRL serial module..Power supply support up to four MPUIQ-SRL modules.Package includes: IEC adapter and four output cables.Black

Power surges and the sudden loss of power can damage computers, televisions, and other electronics. Power strips are only equipped with handling protection from power surges. It does not protect against brownouts, blackouts or other power fluctuations. If you want the ultimate protection of household or business electronics, you need the Liebert PSA5 Battery Backup to protect against power supply interruptions. The Energy Star certified PSA5-1500 is an economical, line-interactive UPS battery backup technology designed with the features you need for reliable power protection for small office/home office computers, network gear, and home entertainment equipment. Designed with easy controls for user friendly operation, the Liebert PSA5 provides ample run time to save work in progress and shutdown your equipment in an orderly fashion. With built in USB port, included USB cable and with available MultiLink shutdown software you can receive remote alerts and complete an unattended orderly shutdown of your systems..Has AVR to extend battery life; USB communications for notifications and controlled shutdown with free software download.With 10 outlets (5 surge only and 5 battery & surge outlets, 2 for transformer-block plugs) and 2 USB Charging Ports.Use LCD Display to monitor run time, load capacity, battery status and input/output voltage and frequency.This Energy Star certified UPS meets eco-friendly requirements.Has 3-year full unit coverage including battery with advanced replacement

The Vertiv Liebert PD5-003 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT5 5-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance and replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD5-003 is a plug-and-play unit that will replace the existing POD box on the back of our UPS. It has two NEMA L6-30R and four NEMA 5-15/20R output connectors and is equipped with a NEMA L14-30P input connector..Power output distribution unit with UPS maintenance bypass feature.Avoid intiating unnecessary downtimes while conducting UPS maintenance.Easy plug-and-play deployment to ensure continuous uptime of your network even during UPS maintenance.Output: Two (2) NEMA L6-30R, Four (4) NEMA 5-15/20R.Input: NEMA L14-30P

Liebert PSI5 800VA UPS, 6-Outlets (PSI5-800RT120).The 800VA UPS offers power protection and has AVR to extend battery life..With Pure Sine Wave UPS, it protects against power fluctuations, equipment damage and data loss..This single phase line interactive UPS has 0.9 output power factor or more usable power..Add a communication card to this UPS to monitor devices remotely.

The Vertiv Liebert PD5-004 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT5 5-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance and replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD5-004 is a plug-and-play unit that will replace the existing POD box on the back of our UPS. It has two NEMA L5-30R and four NEMA 5-20R output connectors and is equipped with a NEMA L14-30P input connector..Power output distribution unit with UPS maintenance bypass feature.Avoid intiating unnecessary downtimes while conducting UPS maintenance.Easy plug-and-play deployment to ensure continuous uptime of your network even during UPS maintenance.Output: Two (2) NEMA L5-30R, Four (4) NEMA 5-20R.Input: NEMA L14-30P

The Vertiv Liebert external hot-swappable, lead-acid UPS battery cabinet designed for use with these UPS models: Liebert GXT5-8000MVRT6UXLN and Liebert GXT5-10KMVRT6UXLN. Its new auto detection feature makes installation easy and fast ensuring the UPS configuration is complete and accurate. Users can connect to up to 10 external battery cabinets to a single UPS for extended runtime..External hot-swappable, lead-acid UPS battery cabinet designed for use with these UPS models: Liebert GXT5-8000MVRT6UXLN and Liebert GXT5-10KMVRT6UXLN.Comes in black.Auto-detection connectivity ensures proper setup and configuration of available runtime.External temperature compensation sensors that extend battery life.Hot-swappable and user-replaceable.Rack/tower convertible.3-year manufacturer limited warranty

The Vertiv Liebert PSI5 1kVA UPS is designed to protect and extend the life of your electronic devices in school, home and office. This 1U rack mount UPS offers cost-effective protection from downtime and damage caused by power outages, brownouts, sags, surges or noise interference. Automatic Voltage Regulation (AVR) extends battery life and safeguards critical equipment. Voltage regulation is from 83 to 159 VAC without using the battery. With advanced pure sine wave output, this line interactive UPS ensures availability of critical IT applications like network closets and small data centers. This battery backup allows orderly shutdown of critical equipment. It takes less than 6 milliseconds transfer time to battery. Add an optional Vertiv Liebert Unity communication card and remotely monitor up to 50 UPS systems through the free Vertiv Trellis Power Insight Application. It has a 2-year Vertiv UPS warranty with optional extensions for up to 5 years total coverage..POWER PROTECTION: The 1kVA UPS has AVR to correct power disturbances..SPACE-SAVING 1U RACK: Get similar features as a 2U battery backup in a compact 1U rack space..MORE USABLE POWER: This single phase line interactive UPS has 0.9 output power factor..REMOTE MANAGEMENT CAPABILITY: Add a communication card to this UPS to monitor devices remotely..PROGRAMMABLE OUTLETS: Get 5 total outlets with 2 programmable outlets to prioritize critical loads.

The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.

N/A. This rack-mount PDU features eight C13 outlets and you can install it into 1U of rack space to power your rack-mount equipment. The PDU provides 16 amps of power to be shared across the eight outlets.Sleek, professional installationUnlike some rack power solutions that mount awkwardly, if at all, this rack-mount PDU is EIA-310D compliant, which ensures a secure and tidy installation into any 19" rack with 1U of available space. Mounting screws and cage nuts are also included to ensure you have everything you need, saving you time and hassle.Flexible power solutionFor maximum compatibility with your devices, this PDU features C13 outlets which are ideal for a wide range of globally distributed devices including I.T equipment, office equipment, measuring instruments and medical devices. Plus, with a total of eight C13 outlets, the PDU can distribute power to your entire rack.Protects your equipmentIn the event of random energy surges that can occur during power outages or other anomalies, this PDU prevents costly damages to your equipment with a built-in dual circuit breaker, ensuring your equipment is protected.The housing of this PDU is also constructed of rugged steel to provide maximum durability in any environment.The PDU08C13H is backed by a StarTech.com 2-year warranty and free lifetime technical support..Ensure hassle-free installation with a 1U EIA-310D compliant PDU.Get wide device compatibility with a PDU that features C13 outlets.10 ft. (3 m) C19 to NEMA5-20p power cord included.Protect your equipment with the dual circuit breaker that's built into this PDU.Solid steel chassis for durability.1U rack-mount design

The Tripp Lite PDUV30HV 5/5.8 kW single-phase basic PDU supports 30 A maximum capacity at 208/240 V. It features 10' attached line cord with L6-30P input plug and 32 C13 as well as six C19 outlets that support up to 38 directly connected pieces of networking equipment. Switch-free unfiltered electrical pass-through of this PDU, distributes UPS or generator power to critical networking equipment. This PDU has circuit breaker to protect from overloads and short circuit fault conditions. It comes with mounting brackets for vertical installation in standard 2 and 4 post racks or other surfaces..Single phase NEMA L6-30P 10 ft 30 A 208/240 V input.208/240 V 50/60 Hz output.6 IEC-C19, 32 IEC-C13 outlet connector.Outlets are arranged in two separately breakered load banks each with 15 A overload protection.0U vertical rack mount.Package includes PDUV30HV 63.75 inch basic PDU with owner's manual, set of 2 plug retention brackets and installation hardware, set of mounting brackets and installation hardware.Maximum input amps (A) details: Agency de-rated to 24A.Sleeved circuit breaker assembly prevents accidental shutoff and requires no tools to reset if tripped.Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment.Included cord retention brackets keep vital network equipment plugged in and continuously powered.Toolless mounting supported in button-mount compatible racks.Included nut and bolt mounting brackets support installation in non button-mount compatible racks and other flat surfaces.Vertical rack mount, wall mount, raceway, workbench style.Form factors supported: 0u vertical installation in equipment racks, plus under-counter and wall mount.Typical applications: Ideal for network configurations where a basic non-metered, unswitched PDU is required to distribute UPS or generator power to multiple pieces of networking equipment.Certifications: Tested to UL60950-1 (USA, Canada), NOM (Mexico).8 lbs.63 3/4"(H) x 2 1/4"(W) x 3 3/4"(D).Lifetime limited warranty.TRIPP LITE IEC-C13/IEC-C19 32/6 Outlet 30 A 208 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

Maximize your work efficiency and reduce discomfort with this ergonomic monitor stand. Elevating your monitor or laptop to the appropriate height helps you maintain good posture, reducing strain and discomfort on your neck and shoulders. The sturdy mesh metal construction of this monitor stand ensures it can withstand the weight of most standard monitors and laptops, making it a durable addition to your workstation. Not only does this monitor stand provide a comfortable viewing angle, it also doubles as a desktop organizer to help you maximize your workspace. With two storage compartments on the side of the stand, you can easily access pens, markers, and other office supplies. You can even tuck your keyboard or files under the stand to free up more desk space for other tasks. The rubber-coated supports on the bottom of the monitor stand keep the it securely in place, while the space-saving design makes it a great gift for anyone in need of a more comfortable and organized workstation. For anyone who spends a lot of time in front of a computer monitor, this monitor stand and organizer is the perfect way to enhance your productivity and reduce discomfort..Reduce pain: Raising the monitor to eye level reduces joint and muscle pain.Increase your workspace: Keep office supplies arranged neatly in the side storage compartments and free up desk space.Durable design: The metal mesh construction of the monitor stand is sturdy and lightweight. It can hold up to 22 lbs. (10kg).Enhance your area: Add an air of sophistication to your desk with this modern monitor stand and organizer.Dimensions: This monitor stand is 20 long x 11.5 wide x 5.5 inches tall (50.8 x 29.21 x 13.97 centimeters).Enhance Your Workstation with a Comfortable and Efficient Monitor Stand

This 1U rackmount power distribution unit (PDU) provides unfiltered power distribution to 10 NEMA 5-15 receptacles from a UPS system, generator, or utility power source. Designed for electrically demanding IT or industrial environments, the CPS1215RM has durable metal housing and network-grade plugs and outlets. A 15-foot AC power cord allows the PDU to be placed where it's needed and a cord retention tray secures power cords, keeping them organized and accessible. The CPS1215RM Basic PDU also comes with a three-year warranty..Rack Mountable (1U) PDU that delivers AC power to servers, equipment, and connected devices..Input voltage: 120 VAC, 50Hz/60Hz.Power capacity: 1.8 kVA, 15-Amp electrical capacity with circuit breaker.Product Dimensions are 17.25"W x 1.75"H x 4.75"D with a Cord Length of 15 ft (4.5 m)..This PDU has a Nominal Input Voltage of 100 VAC - 125 VAC and uses an input plug type NEMA 5-15P..Output voltage: 120 VAC (60 Hz)Plug/connector type: NEMA 5 15P straight, Receptacles: 10 x NEMA 5 15R (Output).Meets or exceeds UL & RoHS.Provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or humming that occurs over telephone lines or stereo electronics.Warranty: 3 Year Limited Warranty.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RM unit, warranty card/manual.Weight: 4.90 lbs..Deliver reliable power to multiple devices with the CPS1215RM Basic PDU from CyberPower, your trusted ally in power.

The CyberPower PDU41001, an 8-outlet (front), 1U rackmount switched power distribution unit (PDU), provides 120V 15A output. It distributes power to eight NEMA 5-15R receptacles from a single NEMA 5-15P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser, and the RJ45 Ethernet port for network connection, or locally by using the LCD controls..Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Nominal input voltage 100-120VAC.Provides 100-120V 15A output.Dimensions: 1.75"H x 17.05"W x 4.41"D.Single NEMA 5-15P plug with unfiltered electrical pass-through.Distributes power to eight NEMA 5-15R receptacles.Provides local and remote control for individual and multiple outlets.Allows for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Included: four mounting brackets (two short and two long), 10 flat head M4x8 bracket mounting screws, cord retention tray, 10 cable ties, 6 M3x6 cord retention tray mounting screws, six M5x12 screws, six washers, RJ45/DB9 serial port connection cable, user manual, registration card, CD.3-year manufacturer limited warranty

The Vertiv Liebert PSI5 uninterruptible power supply (UPS) is designed to protect and extend the life of your electronic devices in school, home and office. This 800VA UPS offers cost-effective protection from downtime and damage caused by power outages, brownouts, sags, surges or noise interference. Automatic Voltage Regulation (AVR) extends battery life. Voltage regulation is from 75 to 146 VAC without using the battery. With advanced pure sine wave output, this line interactive UPS ensures availability of critical IT applications like network closets and small data centers. This battery backup allows orderly shutdown of critical equipment. It takes less than 6 milliseconds transfer time to battery. Add an optional Vertiv Liebert Unity communication card and remotely monitor up to 50 UPS systems with free Vertiv Trellis Power Insight Application. It has a 2-year Vertiv UPS warranty..POWER PROTECTION: The 1440VA UPS has AVR to correct power disturbances..MORE USABLE POWER: This single phase line interactive UPS has 0.9 output power factor..NO INSTALLATION: This plug-and play battery backup does not need installation or rack space..REMOTE MANAGEMENT CAPABILITY: Add a communication card to this UPS to monitor devices remotely..PROGRAMMABLE OUTLETS: Get 5 total outlets with 3 programmable outlets to prioritize critical loads.

Deliver reliable high‑density rack power with this 1U 20‑Outlet Rackmount PDU, designed for enterprise, AV, and IT environments that require secure and scalable power distribution. Equipped with sixteen IEC C13 outlets and four IEC C19 outlets, it supports a wide range of equipment while offering both front and rear access for optimized cable management. Each C19 outlet and every group of four C13 outlets is protected by dedicated 15A circuit breakers, preventing overload damage and ensuring continuous uptime for critical systems. The built‑in 8 ft (2.4 m) power cord provides flexible installation, while included mounting brackets support horizontal or vertical deployment in standard 19" EIA‑310 racks. Constructed from rugged powder‑coated SPCC steel and TAA‑compliant, this PDU delivers dependable 240V power for demanding workloads in data centers, server rooms, and edge deployments..Operates as a single‑phase 240V rack PDU..Accepts 240V AC input for high‑power use..Protects with 15A breakers for each outlet group..Fits a 1U rack footprint for dense cabinets..Connects using IEC C13 and C19 power inputs..Supplies sixteen C13 and four C19 outlets..Supports a total of twenty output ports..Includes an 8 ft cord for extended reach..Ships with screws, washers, and cage nuts..Meets UL 1363 and EIA/ECA‑310‑E standards..2‑year manufacturer warranty.

Tripp Lite Single phase basic power distribution unit has NEMA L6-30P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA L6-30P 15' 30 A 208 - 240 V input.208 - 240 V 50/60 Hz output.Outlet connector: 16 IEC-C13, 4 IEC-C19.Overload protection: 30 A.1U/0U vertical rack mount.Package includes: PDU1230 power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 5.2'' depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Certifications: Tested to UL60950-1 (USA), CSA-C22.2 (canada).Dimensions: 1.75"(H) x 17.50"(W) x 5.20"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.