Ethernet Network Transceivers

The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.

It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables.

HP 10GBase-SR Optical Transceiver Module - PC Compatible

HPE BladeSystem c-Class compatible SFP+ transceiver (455883-B21) supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. It is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Featuring low power consumptionand and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc.

The Cisco 10GBASE-SR module supports link lengths up to 26m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). Using 2000MHz x km of MMF (OM3), it is possible to create link lengths up to 300m, and with 4700MHz x km MMF (OM4), link lengths up to 400m are possible.

The Opengear 1000Base-LX/LH mini-GBIC SFP transceiver module operates at 1 Gbps and offers optical links up to 10 km long via single-mode fiber cable at a wavelength of 1310 nm. It is compatible with IM7200 infrastructure manager for data networking.

WatchGuard WG9020 Firebox M-Series 2-Port 10GbE SFP+ Expansion Module The WatchGuard Firebox M-Series 2-Port 10-Gigabit SFP+ Expansion Module allows you to add more interfaces to your M-Series Firebox appliance (sold separately). It is easily installed in the interface slot on your 3rd Gen Firebox (see specifications tab for compatibility).

The Cisco SFP-10G-LR-S= SFP+ module measuring 0.3" x 0.5" x 2.2", supports a link length of 10 km on standard single-mode fiber. It has LC/PC duplex 10GBase-LR network interface for optimal connectivity. This hot-swappable module transmits data over optical fiber media.

The AddOn® GLC-T-10G-AO transceiver module with RJ-45 10GBase-TX network LAN interface, transfers data at the rate of 10 Gb/s over twisted pair copper media. It offers data transmission over the operating range of 30 m. This transceiver module incorporates 10 Gigabit Ethernet technology to employ faster data transmission. This hot-swappable transceiver module is ideal for data networking.

The MGBLX1 SFP Transceiver from Cisco is an easy-to-install module that provides a simple way to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches.

Cisco 1000BASE-LX SFP (mini-GBIC) Transceiver easy-to-install module that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceiver available for single-mode fiber-optic cabling and can support distance up to 10 kilometers.

The Transition Networks® TN-GLC-SX-MM 1000Base-SX Gigabit Ethernet SFP transceiver module is suitable for Gigabit Ethernet switches and routers, fiber channel switch infrastructure, xDSL applications and metro edge switching. This hot pluggable transceiver module with LLC 1000Base-SX interface, transfers data at the rate of 1.25 Gbps up to 550 m distance over multi-mode fiber media at a wavelength of 850 nm. This transceiver module helps to install in any SFP port allowing for 1000Base-SX interface to the network through the SFP connector.

Our Compatible WatchGuard WG8583 SFP+ transceiver is based on our 10G-SFP-300 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 4.6 dB, which typically is enough to reach about 300 meters over OM3 type fiber or 400 meters over OM4 or higher MMF category fiber. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our WatchGuard WG8583 compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver.

HP® JD089B Transceiver Module is designed and rigorously tested to meet the needs of critical network deployments.

HP® Transceiver module measuring 0.55" x 2.71" x 0.54" uses wired connective technology and is compatible with PC. Transceiver needs 150nm wavelength for its operation at the distance of 100m and transfer the data at the rate of 1 Gb/s.

SFP+ transceiver provides 10GbE connectivity up to 300 m and is compatible with Networking N4000 N4032/N4000 N4032F/N4000 N4064.

The Dell™ Networking 407-BBOU, SFP+ transceiver module provides 10GbE connectivity with a maximum reach up to 300 m, at a wavelength of 850 nm, using SR connector. This transceiver module is perfect for dell networking switches.

10 Gbps | Multi Mode Fiber | LC | 300 m (984 ft) | Lifetime Warranty

HPE J9150D Compatible SFP+ Module - 10GBASE-SR - 10GbE MMF Optic Transceiver - 10GbE SFP+ - LC 300m - 850nm - DDM HPE FlexFabric, 6120XG, 6120G (J9150D-ST)

SFP+ transceiver module offers 40 wire-speed dual gigabit ethernet (GbE) and 10GbE pluggable ports.

EX4500 line of Ethernet switches offers scalable, compact, high-performance platforms for supporting high-density, 10 Gb/s data center top-of-rack as well as data center, campus, and service provider aggregation deployments.

Omnitron Pluggable optical transceiver transfers data at a rate of 1 Gb/s and enables a single network device to connect to a wide variety of fiber optic cable types.

Omnitron Pluggable optical transceiver operates at 850 nm wavelength and covers a maximum distance of up to 1800'. Transceiver is compatible with iConverter media converter modules, T1/E1 MUXes and network interface devices.

Dell Networking transceiver module features 10GBase-LR port, 10 Gbps, upto 6.2 miles.

The Dell™ SFP+ optical transceiver with 10GBase-LR network technology, offers 10GbE connectivity up to 10 km distance. It works on Gigabit Ethernet technology for data networking applications. This hot-pluggable transceiver featuring SFP footprint, features a unique digital diagnostic monitoring interface for real-time access to device operating parameters. The transceiver with a duplex LC connector, is compatible with select Dell networking N4000 series and N-series systems.

The Omnitron miConverter™ 1239-0-1 miniature transceiver/fiber media converter supports 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U, 1000Base-BX and 1000Base-LX/SX networks. This SFP-type converter enables easy adaptability to different fiber types and supports CWDM technology to increase the bandwidth of fiber infrastructure with speed and distance. It facilitates a plug-and-play option with multi-mode and single-mode optical fiber.

The S4110 is a stand-alone fiber to fiber media converter. It is protocol independent and supports data rates from 1Gbps to 11.5Gbps through two open SFP+ slots. This allows network managers to customize the S4110 with a pair of SFP+ modules to meet their network requirements. The open SFP+ ports support a wide variety of Transition Networks 10GE SFP+ fiber modules. This any-rate to same- rate converter can be used to perform reliable and cost-effective single mode to multimode conversion or it can be used to provide wavelength conversion in CWDM applications.

Ubiquiti UniFi Switch Lite 16 PoE is a fully managed Layer 2 switch with sixteen Gigabit Ethernet ports for your RJ45 Ethernet devices. Eight ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 45W for UniFi Access Points or other PoE devices. Managed and configured by the UniFi Network application with UniFi mobile app support, the UniFi Switch Lite 16 PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.

The Cisco 100GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on QSFP form factor.

HPE is the global edge-to-cloud company built to transform your business. How? By helping you connect, protect, analyze, and act on all your data and applications wherever they live, from edge to cloud, so you can turn insights into outcomes at the speed required to thrive in today's complex world.

The Aruba switches provides cost-effective, reliable and secure access layer connectivity for enterprises, branch offices and small and midsize businesses. These fully managed switches deliver Layer Two capabilities with enhanced access security, traffic prioritization, sFlow, and IPv6 host support. PoE+ models deliver up 370W to power access points, IP phones and cameras. The Aruba 2530 Switch Series is easy to deploy, use and manage using Aruba AirWave or Aruba Central. Aruba ClearPass offers network access control (NAC) and external captive portal support. The switches include a Limited Lifetime Warranty.

With its thicker diameter to carry the light of multiple wavelengths, this multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.

The Axiom SFP-10G-SR-AX SFP+ transceiver module supports fiber network connectivity using MMF. The transceiver transfers the data over this MMF at 10GBASE-SR data rate, with a maximum reach of up to 300 m using OM3 and up to 400 m using OM4, at 850 nm wavelength. The transceiver comes with pre-configured specific code to meet the requirements set forth by your router and switch OEMs. This SFP transceiver module is compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series and Nexus 5000/7000 series.

What if you could deploy 100 Gb transceiver connections with an overall reduction of cost per bit? HPE 100Gb QSFP28 Transceivers are designed to meet the increasing demand of growing bandwidth in the data center. The 100 Gb performance allows a reduction of the port density and number of hardware components required to achieve this higher speed. With reduction of cost per bit, HPE 100Gb QSFP28 Transceivers can significantly reduce Capex and Opex spending on interconnect connections. Features: Featured Characteristics: The HPE 100Gb QSFP28 transceivers have four optical lanes in each direction, allowing each to operate at 25 Gb. MPO and Duplex LC connectors for plugging in multi-mode fiber cables. Maximum link length of 70 m on OM3 and 100 m on OM4 multimide fiber at 100 Gb/s.

The Dell™ 407-BBOR SFP mini-GBIC network transceiver is perfect for data networking and optical network applications. It features one LC duplex 1000Base-SX network interface and supports Gigabit Ethernet technology for high-speed data transmission. This network transceiver transmits data at a rate of 1 Gbps. It offers data transmission over multi mode optical fiber media up to a range of 550 m at 850 nm wavelength. This transceiver is compatible with Dell Networking N2048, N4000, N4032F, N4064F, N2024P switches, Dell PowerConnect 2848, 5524P, 5548p, 6224F, 6248P and 7024F switches.

The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.  Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper.  Fiber also protects your data from external sources of noise and interference, improving network performance.

This Cisco-compatible SFP+ transceiver provides 100/1000/10000Base throughput up to 98' over Copper. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy-to-install, hot-swappable transceiver has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant.

This compact opto-isolator enables you to attach an RS-232 device to a USB port and gain isolation from voltage spikes and ground loops. It doesn't require PCI or ISA slots, or IRQs. Using an optional USB Type A - Type B cable, simply plug the opto-isolator into the USB port and Windows will configure the device as an additional COM port.

Experience fast data transfer and reliable network performance with this Ethernet transceiver module. Designed for optimal efficiency and compatibility, this module ensures your devices stay connected with minimal latency and maximum uptime.