WatchGuard WG9020 Firebox M-Series 2-Port 10GbE SFP+ Expansion Module The WatchGuard Firebox M-Series 2-Port 10-Gigabit SFP+ Expansion Module allows you to add more interfaces to your M-Series Firebox appliance (sold separately). It is easily installed in the interface slot on your 3rd Gen Firebox (see specifications tab for compatibility).
WG9020 module have Single Mode for Fiber cable and LC (Lucent Connector) is for fiber connector.
Network Transceiver is SFP+ Transceiver Module Used for 10 Gigabit Ethernet connectivity.
The WG9020 module supports a data transfer rate of up to 10 Gbps, (10,000 Mbps), 10,000,000 Kbps (Kilobits per second) over optical fiber.
This module supports a maximum distance of up to 10,000 meters when using single-mode fiber.
The WG9020 module Supports 10 Gigabit Ethernet
Power Consumption for this module is 2.5 watts.
This module is msa compliant.
It supports MTBF 1,000,000 hours.
The WG9020 module operates at a wavelength of 1310 nm.
WatchGuard Firebox Gigabit Ethernet Optical Fiber SFP+ Transceiver Module, 10,000 Mbps (WG9020) is New at Staples
Our Compatible WatchGuard WG8583 SFP+ transceiver is based on our 10G-SFP-300 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 4.6 dB, which typically is enough to reach about 300 meters over OM3 type fiber or 400 meters over OM4 or higher MMF category fiber. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our WatchGuard WG8583 compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver.
WatchGuard WG8583 transceiver module is a Multi-Mode Fiber (MMF) & LC Duplex Connector.
Its a 10GBASE-SR SFP+ Transceiver Module for 10-Gigabit Ethernet connectivity.
Data Transfer Rate for this module is 10,312.5 Mbps (10.3125 Gbps) and 10,312,500 Kbps.
Maximum Distance covered by this module is 300 meters
It supports 10-Gigabit Ethernet.
The WatchGuard WG8583 has a power consumption of approximately 1.0 watts
It is a hot swappable module.
the WatchGuard WG8583 is MSA compliant
The WatchGuard WG8583 has a Mean Time Between Failures (MTBF) of approximately 1,155,348 hours
This transceiver module operates at a wavelength of 850 nm
WatchGuard Firebox Gigabit Ethernet Optical Fiber 10GBASE-SR SFP+ transceiver module, 10,312.5 mbps, (WG8583) is New at Staples