The T6206 fiberglass 6' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity.
Twin step ladder made of fiberglass
Twin step ladder is 72" L x 23.4" W with an approximate 50.13" spread
Rated to hold up to 300 lbs. per side
Top dimension is 8.5" D x 13" L
High performance dual HolsterTop paint and tool holder
Four rivets attach top to each rail
Double riveted slip-resistant Traction-Tred steps
Heavy-duty internal spreaders
All steps are knee-braced
EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
Slip-resistant foot pads attached to the EDGE structure
Every rivet backed up by metal, metal plates, or washers to protect rails
Design for one or two-person jobs
Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The T7406 fiberglass 6' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity.
Twin step ladder made of fiberglass
Twin step ladder is 72" L x 25" W with an approximate 50.13" spread
Rated to hold up to 375 lbs. per side
Top dimension is 8.25" D x 14.5" L
Heavy gauge aluminum extruded top with thick side plates
Back-up aluminum plates reinforce all top connectors
Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail
Slip-resistant Traction-Tred steps are double riveted and knee-braced
Extra heavy-duty internal aluminum spreaders
Rubber step bumpers to resist damage
EDGE bracing system helps to decrease damage to rail
GLAS*MARK Violator stripes on rails allow the ladder to be more visible
Aluminum external rail shield helps protect against abrasion damage
Shoe pads riveted to the EDGE structure
Every rivet backed up by metal, metal plates, or washer to protect rails
Designed for one or two-person jobs
Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The D6228-2 fiberglass 28' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces.
Type IA duty rating D-rung extension ladder made of fiberglass
D-rung extension ladder is 168" L x 19" W with an approximate 16" fly width
Rated to hold up to 300 lbs.
Exclusive Alflo rung joint means Twist-Proof performance
Smooth operating pulley with polypropylene rope
Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails
External guides at top of base section securely interlock rails
Heavy-duty extruded rung locks are spring loaded to operate smoothly
Pre-pierced holes for easy field installation of accessories
Base and fly separate easily to use base section as single ladder
Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad
Molded rung braces on bottom step for increased durability
The 6210 fiberglass 10' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 120" L x 30.36" W with an approximate 65.88" spread
Rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
LOCKTOP with Lock-In System secures tools to increase productivity
Impact driver slot on the top safely holds the most frequently used tool by pros
Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels
Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools
The load capacity is molded into the top to create a permanent marking if labels are damaged
Lock-In System works with a full line of accessories, extending the usable space of the top
Fully braced steps provide maximum durability
EDGE bracing helps to protect the rails from damage
Wider base than code requires for firm stability provides maximum tip resistance
Weather resistant for outdoor use
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
The D6208-1 fiberglass 8' D-rung straight ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces.
Type IA duty rating D-rung straight ladder made of fiberglass
D-rung straight ladder is 96" L x 19" W with an approximate 16" fly width
Rated to hold up to 300 lbs.
Exclusive Alflo rung joint means Twist-Proof performance
Pre-pierced holes for easy field installation of accessories
Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad
Molded rung braces on bottom step for increased durability
The 6104 fiberglass 4' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 48" L x 19" W with an approximate 28.88" spread
Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
HolsterTop with Lock-In System secures tools to increase productivity
Back-up plates reinforce all top connectors
Braces on top and bottom step
Double riveted slip-resistant Traction-Tred steps
Full set of rear horizontals spaced one per foot
Heavy-duty internal spreaders
Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3
The D6240-2 fiberglass 40' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces.
Type IA duty rating D-rung extension ladder made of fiberglass
D-rung extension ladder is 240" L x 19" W with an approximate 16" fly width
Rated to hold up to 300 lbs.
Exclusive Alflo rung joint means Twist-Proof performance
Smooth operating pulley with polypropylene rope
Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails
Two sets of external guides at top of base section securely interlock rails
Heavy-duty extruded rung locks are spring loaded to operate smoothly
Pre-pierced holes for easy field installation of accessories
Base and fly separate easily to use base section as single ladder
Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad
Molded rung braces on bottom step for increased durability
The 6204 fiberglass 4' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 48" L x 19.92" W with an approximate 29" spread
Rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
LOCKTOP with Lock-In System secures tools to increase productivity
Impact driver slot on the top safely holds the most frequently used tool by pros
Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels
Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools
The load capacity is molded into the top to create a permanent marking if labels are damaged
Lock-In System works with a full line of accessories, extending the usable space of the top
Fully braced steps provide maximum durability
EDGE bracing helps to protect the rails from damage
Wider base than code requires for firm stability provides maximum tip resistance
Weather resistant for outdoor use
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
The P6208 fiberglass 8' platform ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. A full set of rear horizontals are spaced one foot apart.
Type IA duty rating reach height platform ladder made of fiberglass
Platform ladder is 120" L x 33.96" W with 14' reach height and an approximate 66.6" spread
Rated to hold up to 300 lbs.
Platform is 14.6" D x 15" W
Safety guardrail encourages proper ladder use
Back-up plates reinforce all top connectors
Large platform provides secure and comfortable work area
Slip-resistant Traction-Tred steps are double riveted
Full set of rear horizontals spaced one foot apart
EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
Slip-resistant foot pads attached to the EDGE structure
Every rivet backed up by metal, metal plates, or washers to protect rails
The D6224-2 fiberglass 24' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces.
Type IA duty rating D-rung extension ladder made of fiberglass
D-rung extension ladder is 144" L x 19" W with an approximate 16" fly width
Rated to hold up to 300 lbs.
Exclusive Alflo rung joint means Twist-Proof performance
Smooth operating pulley with polypropylene rope
Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails
External guides at top of base section securely interlock rails
Heavy-duty extruded rung locks are spring loaded to operate smoothly
Pre-pierced holes for easy field installation of accessories
Base and fly separate easily to use base section as single ladder
Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad
Molded rung braces on bottom step for increased durability
The L6206 fiberglass 6' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps.
Type IA duty rating leaning ladder made of fiberglass
Leaning ladder is 74.4" L x 24" W with an approximate 38" spread
Rated to hold up to 300 lbs.
Top dimension is 7" D x 13" L
LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
Dropped rear rail pivot point gets ladder closer to your work
Color and branding differentiates LEANSAFE from standard step ladders
Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode
Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode
Back-up plates reinforce all top connectors
Heavy-duty internal spreaders
Full set of rear horizontals spaced one per foot
EDGE360 bracing protects the ladder feet from every angle
Every rivet backed up by metal, metal plates, or washer to protect rails
Six-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 3' 10" and a maximum reach height of 10'
Six-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 2' 10"s and a maximum reach height of 9'
The D6220-2 fiberglass 20' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces.
Type IA duty rating D-rung extension ladder made of fiberglass
D-rung extension ladder is 120" L x 19" W with an approximate 16" fly width
Rated to hold up to 300 lbs.
Exclusive Alflo rung joint means Twist-Proof performance
Smooth operating pulley with polypropylene rope
Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails
External guides at top of base section securely interlock rails
Heavy-duty extruded rung locks are spring loaded to operate smoothly
Pre-pierced holes for easy field installation of accessories
Base and fly separate easily to use base section as single ladder
Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad
Molded rung braces on bottom step for increased durability
The T6208 fiberglass 8' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity.
Twin step ladder made of fiberglass
Twin step ladder is 96" L x 26.84" W with an approximate 64.13" spread
Rated to hold up to 300 lbs. per side
Top dimension is 8.5" D x 13" L
High performance dual HolsterTop paint and tool holder
Four rivets attach top to each rail
Double riveted slip-resistant Traction-Tred steps
Heavy-duty internal spreaders
All steps are knee-braced
EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
Slip-resistant foot pads attached to the EDGE structure
Every rivet backed up by metal, metal plates, or washers to protect rails
Design for one or two-person jobs
Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The T6204 fiberglass 4' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity.
Twin step ladder made of fiberglass
Twin step ladder is 48" L x 19.92" W with an approximate 36.13" spread
Rated to hold up to 300 lbs. per side
Top dimension is 8.5" W x 13" L
High performance dual HolsterTop paint and tool holder
Four rivets attach top to each rail
Double riveted slip-resistant Traction-Tred steps
Heavy-duty internal spreaders
All steps are knee-braced
EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
Slip-resistant foot pads attached to the EDGE structure
Every rivet backed up by metal, metal plates, or washers to protect rails
Design for one or two-person jobs
Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The T7408 fiberglass 8' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity.
Twin step ladder made of fiberglass
Twin step ladder is 96" L x 28.68" W with an approximate 64.13" spread
Rated to hold up to 375 lbs. per side
Top dimension is 8.25" D x 14.5" L
Heavy gauge aluminum extruded top with thick side plates
Back-up aluminum plates reinforce all top connectors
Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail
Slip-resistant Traction-Tred steps are double riveted and knee-braced
Extra heavy-duty internal aluminum spreaders
Rubber step bumpers to resist damage
EDGE bracing system helps to decrease damage to rail
GLAS*MARK Violator stripes on rails allow the ladder to be more visible
Aluminum external rail shield helps protect against abrasion damage
Shoe pads riveted to the EDGE structure
Every rivet backed up by metal, metal plates, or washer to protect rails
Designed for one or two-person jobs
Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The PD6206 fiberglass 6' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart.
Type IA duty rating reach height podium ladder made of fiberglass
Podium ladder is 108" L x 31.5" W with 12' reach height and an approximate 56" spread
Rated to hold up to 300 lbs.
Platform is 19.5" D x 16" W
Same reach height as a 8' step ladder
4X Work Zone to reach all directions
Extra-large platform for long standing comfort
LOCKTOP extended guardrail securely wraps around the work zone and holds an arsenal of tools
EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads
Double riveted slip-resistant Traction-Tred steps
Back-up plates reinforce all top connectors
All steps and two rear horizontals are knee-braced
The 6203 fiberglass 3' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 36" L x 18.12" W with an approximate 23.13" spread
Rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
LOCKTOP with Lock-In System secures tools to increase productivity
Impact driver slot on the top safely holds the most frequently used tool by pros
Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels
Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools
The load capacity is molded into the top to create a permanent marking if labels are damaged
Lock-In System works with a full line of accessories, extending the usable space of the top
Fully braced steps provide maximum durability
EDGE bracing helps to protect the rails from damage
Wider base than code requires for firm stability provides maximum tip resistance
Weather resistant for outdoor use
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
The L6210 fiberglass 10' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps.
Type IA duty rating leaning ladder made of fiberglass
Leaning ladder is 122.4" L x 31.2" W with an approximate 62.5" spread
Rated to hold up to 300 lbs.
Top dimension is 7" D x 13" L
LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
Dropped rear rail pivot point gets ladder closer to your work
Color and branding differentiates LEANSAFE from standard step ladders
Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode
Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode
Back-up plates reinforce all top connectors
Heavy-duty internal spreaders
Full set of rear horizontals spaced one per foot
EDGE360 bracing protects the ladder feet from every angle
Every rivet backed up by metal, metal plates, or washer to protect rails
Ten-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 7' 8" and a maximum reach height of 14'
Ten-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 6' 8"s and a maximum reach height of 13'
The 6110 fiberglass 10' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot™ for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 120" L x 28" W with an approximate 65.75" spread
Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
HolsterTop with Lock-In System secures tools to increase productivity
Back-up plates reinforce all top connectors
Braces on top and bottom step
Double riveted slip-resistant Traction-Tred steps
Full set of rear horizontals spaced one per foot
Heavy-duty internal spreaders
Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3
The L6212 fiberglass 12' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps.
Type IA duty rating leaning ladder made of fiberglass
Leaning ladder is 146.4" L x 34.85" W with an approximate 75" spread
Rated to hold up to 300 lbs.
Top dimension is 7" D x 13" L
LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
Dropped rear rail pivot point gets ladder closer to your work
Color and branding differentiates LEANSAFE from standard step ladders
Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode
Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode
Back-up plates reinforce all top connectors
Heavy-duty internal spreaders
Full set of rear horizontals spaced one per foot
EDGE360 bracing protects the ladder feet from every angle
Every rivet backed up by metal, metal plates, or washer to protect rails
Twelve-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 9' 7" and a maximum reach height of 16'
Twelve-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 6' 8"s and a maximum reach height of 13'
The PD6208 fiberglass 8' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart.
Type IA duty rating reach height podium ladder made of fiberglass
Podium ladder is 130" L x 34.5" W with 14' reach height and an approximate 68.2" spread
Rated to hold up to 300 lbs.
Platform is 19.5" D x 16" W
Same reach height as a 10' step ladder
4X Work Zone to reach all directions
Extra-large platform for long standing comfort
LOCKTOP extended guardrail securely wraps around the work zone and holds an arsenal of tools
EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads
Double riveted slip-resistant Traction-Tred steps
Back-up plates reinforce all top connectors
All steps and two rear horizontals are knee-braced
The 6212 fiberglass 12' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Step ladder made of fiberglass
Step ladder is 144" L x 33.84" W with an approximate 78.25" spread
Rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
LOCKTOP with Lock-In System secures tools to increase productivity
Impact driver slot on the top safely holds the most frequently used tool by pros
Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels
Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools
The load capacity is molded into the top to create a permanent marking if labels are damaged
Lock-In System works with a full line of accessories, extending the usable space of the top
Fully braced steps provide maximum durability
EDGE bracing helps to protect the rails from damage
Wider base than code requires for firm stability provides maximum tip resistance
Weather resistant for outdoor use
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
The T6210 fiberglass 10' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity.
Twin step ladder made of fiberglass
Twin step ladder is 120" L x 30.36" W with an approximate 78.13" spread
Rated to hold up to 300 lbs. per side
Top dimension is 8.5" D x 13" L
High performance dual HolsterTop paint and tool holder
Four rivets attach top to each rail
Double riveted slip-resistant Traction-Tred steps
Heavy-duty internal spreaders
All steps are knee-braced
EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
Slip-resistant foot pads attached to the EDGE structure
Every rivet backed up by metal, metal plates, or washers to protect rails
Design for one or two-person jobs
Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The D6210-1 fiberglass 10' D-rung straight ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces.
Type IA duty rating D-rung straight ladder made of fiberglass
D-rung straight ladder is 120" L x 19" W with an approximate 16" fly width
Rated to hold up to 300 lbs.
Exclusive Alflo rung joint means Twist-Proof performance
Pre-pierced holes for easy field installation of accessories
Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad
Molded rung braces on bottom step for increased durability
The PD6210 fiberglass 10' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart.
Type IA duty rating reach height podium ladder made of fiberglass
Podium ladder is 159" L x 38" W with 16' reach height and an approximate 68.2" spread
Rated to hold up to 300 lbs.
Platform is 19.5" D x 16" W
Same reach height as a 12' step ladder
4X Work Zone to reach all directions
Extra-large platform for long standing comfort
LOCKTOP™ extended guardrail securely wraps around the work zone and holds an arsenal of tools
EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads
Double riveted slip-resistant Traction-Tred steps
Back-up plates reinforce all top connectors
All steps and two rear horizontals are knee-braced
The PD6204 fiberglass 4' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart.
Type IA duty rating reach height podium ladder made of fiberglass
Podium ladder is 84" L x 27.5" W with 10' reach height and an approximate 43.6" spread
Rated to hold up to 300 lbs.
Platform is 19.5" D x 16" W
Same reach height as a 6' step ladder
4X Work Zone to reach all directions
Extra-large platform for long standing comfort
LOCKTOP™ extended guardrail securely wraps around the work zone and holds an arsenal of tools
EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads
Double riveted slip-resistant Traction-Tred steps
Back-up plates reinforce all top connectors
All steps and two rear horizontals are knee-braced
The D6210-1 fiberglass 12' D-rung straight ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces.
Type IA duty rating D-rung straight ladder made of fiberglass
D-rung straight ladder is 144" L x 19" W with an approximate 16" fly width
Rated to hold up to 300 lbs.
Exclusive Alflo rung joint means Twist-Proof performance
Pre-pierced holes for easy field installation of accessories
Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad
Molded rung braces on bottom step for increased durability
The 7407 fiberglass 7' step ladder has a duty rating of 375 lbs. and features 3" metal steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Type IAA duty rating step ladder made of fiberglass
Step ladder is 84" L x 26.84" W with an approximate 49" spread
Rated to hold up to 375 lbs.
Top dimension is 7.25" D x 14.875" L
Extra heavy-duty aluminum HolsterTop with thick side plates
Back-up plates reinforce all top connectors
Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each front rail
Slip-resistant Traction-Tred steps are double riveted and have extra wide knee braces
Full set of rear horizontals are knee braced and spaced one per foot
Extra heavy-duty internal aluminum spreaders
Aluminum external rail shield helps protect against abrasion damage
GLAS*MARK Violator stripes on rails allow the ladder to be more visible
Slip-resistant foot pads attached to the EDGE structure
EDGE bracing system helps to decrease damage to rail
Every rivet backed up by metal, metal plates, or washer to protect rails
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
The P6202 fiberglass 2' platform ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. A full set of rear horizontals are spaced one foot apart.
Type IA duty rating reach height platform ladder made of fiberglass
Platform ladder is 48" L x 23.4" W with 8' reach height and an approximate 29.75" spread
Rated to hold up to 300 lbs.
Platform is 14.6" D x 15" W
Back-up plates reinforce all top connectors
Large platform provides secure and comfortable work area
Slip-resistant Traction-Tred steps are double riveted
Full set of rear horizontals spaced one foot apart
EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
Slip-resistant foot pads attached to the EDGE structure
Every rivet backed up by metal, metal plates, or washers to protect rails
The 6205 fiberglass 5' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 60" L x 21.6" W with an approximate 35.13" spread
Rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
LOCKTOP with Lock-In System secures tools to increase productivity
Impact driver slot on the top safely holds the most frequently used tool by pros
Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels
Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools
The load capacity is molded into the top to create a permanent marking if labels are damaged
Lock-In System works with a full line of accessories, extending the usable space of the top
Fully braced steps provide maximum durability
EDGE bracing helps to protect the rails from damage
Wider base than code requires for firm stability provides maximum tip resistance
Weather resistant for outdoor use
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
ANSI and OSHA compliant for safety
Werner 5' Fiberglass Step Ladder, 300 lbs. Capacity (6205) is Out of stock
The T7404 fiberglass 4' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity.
Twin step ladder made of fiberglass
Twin step ladder is 48" L x 21.5" W with an approximate 36.13" spread
Rated to hold up to 375 lbs. per side
Top dimension is 8.25" D x 14.5" L
Heavy gauge aluminum extruded top with thick side plates
Back-up aluminum plates reinforce all top connectors
Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail
Slip-resistant Traction-Tred steps are double riveted and knee-braced
Extra heavy-duty internal aluminum spreaders
Rubber step bumpers to resist damage
EDGE bracing system helps to decrease damage to rail
GLAS*MARK Violator stripes on rails allow the ladder to be more visible
Aluminum external rail shield helps protect against abrasion damage
Shoe pads riveted to the EDGE structure
Every rivet backed up by metal, metal plates, or washer to protect rails
Designed for one or two-person jobs
Maximum load per side, including person and materials, shall not exceed duty rating of ladder
Werner 4' Fiberglass Twin Step Ladder, 375 lbs. Capacity (T7404) is Out of stock
The 6206 fiberglass 6' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 72" L x 23.4" W with an approximate 41.25" spread
Rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
LOCKTOP with Lock-In System secures tools to increase productivity
Impact driver slot on the top safely holds the most frequently used tool by pros
Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels
Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools
The load capacity is molded into the top to create a permanent marking if labels are damaged
Lock-In System works with a full line of accessories, extending the usable space of the top
Fully braced steps provide maximum durability
EDGE bracing helps to protect the rails from damage
Wider base than code requires for firm stability provides maximum tip resistance
Weather resistant for outdoor use
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
ANSI and OSHA compliant for safety
Werner 6' Fiberglass Step Ladder, 300 lbs. Capacity (6206) is Out of stock
The 6207 fiberglass 7' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity.
Type IA duty rating step ladder made of fiberglass
Step ladder is 84" L x 25.12" W with an approximate 47.5" spread
Rated to hold up to 300 lbs.
Top dimension is 5.75" D x 13" L
LOCKTOP with Lock-In System secures tools to increase productivity
Impact driver slot on the top safely holds the most frequently used tool by pros
Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels
Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools
The load capacity is molded into the top to create a permanent marking if labels are damaged
Lock-In System works with a full line of accessories, extending the usable space of the top
Fully braced steps provide maximum durability
EDGE bracing helps to protect the rails from damage
Wider base than code requires for firm stability provides maximum tip resistance
Weather resistant for outdoor use
Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
ANSI and OSHA compliant for safety
Werner 7' Fiberglass Step Ladder, 300 lbs. Capacity (6207) is Out of stock