Drive Bay Adapters

Compatible hard drive caddy (tray) for ICY DOCK ToughArmor MB992 and MB996 series SATA hot swap backplane RAID cage.Drive Interface: Serial ATA/300.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Integrated 2nd Battery, SmartCard, Barcode, Magstripe, Fingerprint, Serial Options and More

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the EZConvert Lite MB882SP-1S-3B, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights (7mm to 15mm) into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable -a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Drive Interface: Serial ATA/600, SAS.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Useful for the multi-tenant unit and multi-business unit with Layer 4 traffic classifiers and bandwidth limit

504669982eea8dcc9ba6320eb38b1e62.Host Interface: Serial ATA.Drive Interface: Serial ATA, SAS.Number of Total Expansion Bays: 1.The 14" 1920 x 1080 screen provides a great movie watching experience

ff244423cfca789cd3ea284efccd5070.Exact same form factor of a slim optical drive..Fits 1 x 5mm to 9.5mm height 2.5" SATA HDD / SSD in a 12.7mm slim ODD bay..Supports transfer speed up to 6Gbps.The receiving SATA connector rated for up to 10,000 drive insertions.Removable EZ Slide Micro drive tray for easy maintenance.

The Next Generation NVMe Mobile Rack: The MB601VK-B is ICY DOCK's next generation PCI-E based mobile rack with ability in supporting Intel, Micron, and Seagate ultra high speed 2.5" U.2 NVMe solid-state-disk in an external 3.5" floppy drive bay. Superior Performance : Built with the next generation U.2 interface, MB601VK-B offers up to 32Gb/s of bandwidth and supports 2.5" U.2 NVMe SSD, SAS and SATA interface 2.5" solid state drives or hard drives. The superior performance of MB601VK-B provides the maximum amount of transfer speed for the most data intensive tasks; such as real time large database transfers and refreshes, massive bulk data swaps from multiple networks, VMware providing virtual operating systems for mulitple computers, and large scale editing of large multimedia assets of virtual reality, video, music, and other graphics between multiple workstations. Convenient Utility Accessibility: The EZ Slide Mini trays supports U.2 hot-swap feature, which makes U.2 NVMe SSD interchangeability and maintenance completely hassle-free. With a simple swap of the SSD / HDD, your overall down time is greatly reduced especially when a drive is needed to be switched. The tray is also designed to accommodate 7 to 15mm height hard drives and SSD, creating a 2.5" hot swap bay for U.2 NVMe SSD or any standard SAS / SATA hard drives and SSDs. While the tray is not inside the MB601VK-B, the Anti-Dust Flap feature helps prevent dust from entering into the mobile rack. The front of the MB601VK-B includes a status LED when the drive is powered on, off and accessed. Active Power Technology (APT) allows the status LED to be on only when a hard drive is inserted into the enclosure. For drive security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed. Additionally, the 2 segment key lock provides extra protection to theft of hard drives as well as safeguards any sensitive data. Full Metal Protection: Making sure that the material used is designed in a way where it can be relied upon for many years after its deployment, the MB601VK-B is constructed out of heavy duty metal throughout the entire device and is capable of holding up in the harshest environments. With the Full Metal design, the ToughArmor is perfect for industrial, military and medical devices that may require a flammability rating as the full metal material is considered to be compliant with flammability requirements..Fits 1 x 2.5" U.2 NVMe SSD or 2.5" SAS / SATA SSD / HDD.NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD / HDD.Fits any external 3.5" drive bay or floppy bay

20a0620c3c8230159808fbc302a89934.Ideal 2.5" mobile rack for system that has tight space constraints such as embedded systems, mobile computers, rackmount computers, rackmount systems, industrial automation control system, military computers and OEM / ODM systems.Ultra small form factor design for maximum space saving.Fits 1 x 7mm to 9.5mm height 2.5" SAS/SATA HDD/SSD in a 12.7mm slim ODD slot or any FDD slot

The EZ-Fit Lite MB290SP-B is a great choice if you're looking to install 1 or 2 SSDs/2.5" HDDs into a single 3.5" bay. If you're looking for storage density, compatibility, flexibility, and durability without the hassle of a complicated installation, go with the EZ-Fit Lite MB290SP-B. It's never been easier to effortlessly install 2.5" drives in a system. We, IcyDock, put a lot of thought into the design to fulfill the needs of our customers, whether they're building Home Theater Systems (HTPC), Gaming PCs, or Mini-IPX systems. Our EZ-Fit Lite MB290SP-B certainly doesn't disappoint..Effortlessly transform bay drives to accommodate HDDs or SSDs, with the drive bay adapter.Takes minimal energy and effort to get installed internally.Number of 2.5" Bays: 2.My Image Garden: Software which lets you access, organize and personalize your favorite photos and documents.

8380d180755b5cee0c5bd48733b97cb9.Durable one piece, lightweight construction.Compatible with any standard 5.25" external drive bay.Fits 1 x 3.5" device / hard drive and 1 x Ultra-Slim ODD

2981cee5982b122981107d0c00876f49.Supports docking 1 x 2.5" SAS/SATA HDD/SSD with SATA hot-swap functionality (5mm - 15mm).Fits any external 3.5" bay.Full metal chassis with industrial ABS plastic for full protection to the drive

The FLEX-FIT Trio MB343SP is a very unique 3.5" to 5.25" front bay adapter. At first glance is of what looks like a simple 3.5" to 5.25 device bay adapter, but there is more than meets the eye. We've created a device that utilizes a single 5.25" bay and converts it into 2 x 2.5" HDD/SSD slots and a 3.5" device or hard drive bay designed for tool-less drive installation. The FLEX-FIT Trio MB343SP pushes the envelope with its unique features and brilliant engineering. As a result, you get a beautifully crafted adapter that is sturdy, flexible and multifunctional..Number of Total Expansion Bays: 3.Number of 3.5" Bays: 1.Number of 2.5" Bays: 2

Icy Dock is proud to introduce the MB082SP, the newest product in the incredibly popular SSD/HDD bracket converter line. Easy installation and Durability is the key to this product, perfect for users that require the best physical protection of their data, with the least amount of hassle of installation..Drive Interface: IDE, Serial ATA.Number of Total Expansion Bays: 2.Number of 2.5" Bays: 2.Windows 10 features the new Edge browser, which gives you a much larger viewing area for enjoying your online content at its best. You can write notes directly onto web pages and share them with anyone - perfect for home users or professionals.

This compact flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM micro drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive..CompactFlash.Includes: Compact flash to IDE adapter, 3 1/2" enclosure, full profile expansion slot bracket, SP4 to LP4 molex power cable, instruction manual.Interface: 1 x 44 pin IDE/EIDE.Media supported: CompactFlash Type I, II, microdrive.Host connectors: 1 - IDE (40 Pin, EIDE/PATA) male, 1 - SP4 (4 pin, small drive power) male.Compatible slots: 1 x expansion slot, Compatible bays: 1 x front accessible - 3 1/2" x 1/3H.Use your compact flash card as a bootable and removable device.Excellent for swapping operating systems quickly without having to take your computer apart.Easily swap cards in and out with built in push button ejector.Easy to use jumpers offer simple master/slave drive setting.Can be mounted in the front or rear panel of your case, to fit into any 3 1/2" bay or available expansion slot.Temperature: - 67 to 185 deg F, Humidity: 5 to 85% RH.Certifications and standards: FCC, RoHS.Weight: 5.1 oz.Warranty: 2 years limited.StarTech Drive Bay Single CompactFlash Card Reader/Writer - Flashcard Accessibility

Icy Dock® ToughArmor EX 2.5"/3.5" Internal SATA/SAS HDD/SSD Mobile Rack Drive Bay Adapter; Black (MB492SKLB).Drive fit: Two 2.5" SAS/SATA HDD/SSD.Drive bay fit: 3.5" front device bay (floppy bay).Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.Drive cooling: Metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Drive security: Two segment key lock + thumbscrew lock.Dimensions: 1"H x 4"W x 5.4"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for enterprise applications.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led only powers up if there is drive installed in the drive bay.Contains user manual, screws, keys and drive ID plug.Weight: 1.77 lbs..Comes with 3 years warranty

StarTech Front Bay Bracket Adapter, (BRACKETFDBK).Color: Black.Bay provided: 1 x 3 1/2" x 1/3 (H) internal.Bay required: 1 x 5 1/4" x 1/2 (H) front accessible.Mount almost any 3 1/2" device into a standard 5 1/4" front bay.Device supported: Hard disk drive.Compatibility: 3 1/2" floppy drives.3 1/2" front bay cut out.Green compliance certificate/authority: RoHS.Includes mounting screws.Material: Plastic.Package contents: Front bay adapter bracket, mounting screws.2 years warranty.2 years warranty.StarTech.com Bracket Adapter - Utilize Your Available Front Bay Space

Icy Dock® TurboSwap 3.5"/5.25" Internal SATA Tray-Less HDD Mobile Rack Drive Bay Adapter; Black (MB171SPB).Drive fit: 3.5" SATA 1.5/3/6 Gbps hard drive.Drive bay fit: 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: 15-Pin SATA power connection.Drive cooling: 80 x 80 x10 mm cooling fan & metal heat dissipation.LED indication: Power (solid blue)/HDD access (flashing blue).Dimensions: 1.6"H x 5.7"W x 6.8"D.Supported drive capacity: 8TB.Features heavy-duty all metal construction for added durability.Locking mechanism aids to protect your data effectively.Front panel fan speed control with drive power button for convenient usage.Shock absorbing anti vibration feature for added protection and long lasting usage.Contains user manual, eight screws and two keys.Weight: 346.3 g.Comes with 3 years warranty

StarTech 2.5in SATA Hard Drive to 3.5in Drive Bay Mounting Kit.Hard drive accessory type: SATA.Drive connectors: 1 x SATA data and power combo (7 + 15 pin) receptacle.Host connectors: 1 x LP4 (4 pin - Molex large drive power) male, 1 x SATA (7 pin - data) receptacle.2 1/2" SATA hard drive in a 3 1/2" drive bay.A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive.Features a sturdy aluminum bracket as well as a combined SATA cable which helps simplify installation and reduce clutter within the computer case.Device supported: Hard disk drive.Compatibility: PC.Green compliance certificate/authority: RoHS.Material: Aluminum.Package contents: 3 1/2" mounting bracket, data/power adapter cable, screw kit.2 years warranty.Bay provided: 1 x 2 1/2" internal, bay required: 1 x 3 1/2" internal.StarTech.com Drive Bay Mounting Kit - Secure Your Internal Hard Drive

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.

Icy Dock® ToughArmor Dual Bay 2.5" SATA Drive Enclosure, Matte Black (MB992SKRB).Drive enclosure is perfect for use in industrial PCs, SMB SFF servers, mobile DVR systems, or even home servers.Dimensions: 1"H x 4"W x 6.3"D.Comes in matte black color with metal construction.Number of total expansion bays: 2, number of 2.5" bays: 2, drive bay: 1 x 3.5" external bay.Drive interface: SATA III, host interface: 1 x SATA 7 pin.Number of hard drives supported: 2, number of solid state drive supported: 2.Controller type: Serial ATA/600, RAID levels: 0, 1, JBOD, RAID levels (SDE): 0, 1, JBOD.Maximum transfer rate: Up to 6 Gbps, Hot swappable.Drive cooling: Airflow vents with metal heat dissipation, drive security: 2 segment key lock.Features HDD access indicator, rebuild LED indicator.Multi-Flow Technology (MFT).Anti-vibration Technology (AVT).Active Power Technology (APT).Power input: 1 x SATA 15 pin power.Form factor: Internal.Includes enclosure, user manual, screws, keys.Weight: 481.5 g.Comes with 3 year limited warranty

Startech.com® 4-Bay 2.5/3.5" SATA HDD / SSD docking station supports both 2.5" and 3.5" form factor hard and solid state drives for enhanced performance. Docking station features a built-in dual 40 cm fan for optimum cooling and has SATA controllers..Drive capacity: Currently tested with up to 4TB 7200 RPM 3.5" hard drives per bay (8TB total) and 2TB 5900 RPM 2.5" hard drives (2TB total).Interfaces/ports: Serial ATA/600, 1 x USB 3.0 - 9 pin USB Type B, 4 x SATA 6Gb/s - 22 pin Serial ATA, drive connectors: 4 - SATA data & power combo (7 + 15 pin) receptacle, host connectors: 1 - USB 3.0 B (9 pin, superspeed) female.No. of expansion bays: 4 (total)/4 (free) - 2.5"/3.5" shared - external.Drive installation: Removable, fans: 2 - 40 mm, chipset ID: VL812+ASM1053E.Performance: Type and rate: USB 3.0 - 5 Gbit/s, UASP support, insertion rating: 15,000 Cycles.Black, enclosure type: Plastic.OS compatibility Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, Apple® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chrome™ OS.LED Indicators: 4 - drive power/activity LED.Save time, with file transfers up to 70% faster than traditional USB 3.0 when used with a UASP-supported host, helps to prevent premature drive failure, with built-in dual 40 cm fans that keep your drives running cool.Hassle-free operation with independent SATA controllers allowing for uninterrupted data transfers while hot-swapping the other drives.Applications: System builders and I.T. specialists who need quick access to drives for imaging, backup data quickly to an external drive for archiving, transferring data from one hard drive to another.Technicians who test or benchmark multiple hard drives, backup important data and easily take the drive to an offsite location for safekeeping.Power source: AC adapter, input: Voltage: 100 - 240 VAC, current: 2.5 A, output: Voltage: 12 DC, current: 6.5 A.Operating temperature: 5 to 35 deg C, storage temperature: -20 to 50 deg C, humidity: 20 - 80% RH.Includes: 1 - USB 3.0 4-bay 2.5/3.5" SATA SSD/HDD dock, 1 - USB 3.0 Cable, 1 - universal power adapter (NA/EU/UK/AUS), 1 - instruction manual.Certifications and standards: FCC, RoHS.Dimensions: 3.3"H x 6.7"W x 11.2"D.Weight: 36.5 oz..Warranty: 2 years.Startech.com® 4-Bay 2.5/3.5" SATA HDD / SSD docking station is designed to swap four drives from your desktop or laptop computer using a single USB port.

Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs - Access two 2.5/3.5” SATA hard drives or solid state drives simultaneously and hot swap drives in and out of this HDD docking station - Dual Bay SATA HDD Docking Station features plug-and-play functionality - Gen 1 USB 3.1 hard drive dock with data transfer speeds of up to 5Gbps (AKA USB 3.0) / SATA docking station / SSD docking station / SATA drive dock / USB3 HDD docking station.Access two 2.5/3.5” SATA hard drives (HDD) or solid state drives (SSD) simultaneously and hot swap drives in and out.USB 3.0 with data transfer speeds of up to 5Gbps.Convenient top-loading design with independent drive doors.Plug-and-play functionality.Easy to set up with no driver or software installation required.Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs

The ExpressCage MB742SP-B brings dense 2.5" SSD or HDD storage to the floppy 3.5" bay. With the rising popularity of SFF (Small-Form-Factor) systems due to space-savings and lower power usage, a convenient and protective data storage enclosure is necessary to maintain the critical data stored in the system. The ExpressTray MB742TP-B drive caddy supports tool-less drive installation, and it has been designed to hold your drives securely, with an enhanced tool-less drive gripping mechanism, stabilized drive insertion design, and a strengthened single-piece latch. The new metal chassis has all-around air ventilation to keep your drives running cool all day, even under heavy load. Space Saver: Utilizing the small space of the external 3.5" drive bay (floppy bay), the MB742SP-B is perfect for applications where space is limited. Small-Form-Factor (SFF) PCs, embedded systems, Box PCs, in-vehicle systems, and home servers can all benefit from this dual 2.5" SAS/SATA drive enclosure. The two drives are also in an ideal position to be used in a RAID setup when combined with a RAID card or software RAID solution. A RAID 1 setup can be used to prevent drive failure, and is excellent for sensitive data, or having a backup of your OS drive. A RAID 0 setup is ideal for applications that require high-speeds, such as in a gaming computer or photo/video editing system. Maximize your speed and security while minimizing your space footprint with MB742SP-B. Innovative New Tray Caddy Design: The ExpressTray MB742TP-B in the MB742SP-B is designed for applications where drive hot-swap is required, while providing security and durability. Grips on the sides of the caddy hold your drives securely, to keep your sensitive data safe. The unique built-in screws allow for entirely tool-less drive installation and removal, to allow for quick and easy swapping of drives. In addition, for applications that require extra stability, we have provided the optional bottom screw holes so you can hold your drives even more securely. The strong, single-piece latch pops out with the press of a button, making it easy to remove your drives. The integrated drive activity light shines solid blue when powered, and flashes blue when the drive is in use, so you know when it's safe to remove your drives. Versatile Utility & Security: We understand that the first priority for any storage enclosure must be security of your data. That's why the MB742SP-B uses a metal enclosure for maximum protection from bumps and drops. The heat-dissipating properties of the enclosure, combined with the amply placed ventilation holes, keep your drives running cool all day, even under heavy load. The ExpressCage MB742SP-B supports both 7-pin SATA and 15-pin SATA power cables with locking latches, so you'll never need to worry about cables unintentionally disconnecting from your enclosure. Once these cables are connected, they'll lock into place and stay that way..Rugged metal housing with durable ABS caddies for maximum security and protection.Fits 2x 5mm, 7mm, & 9.5mm 2.5" SATA HDD/SSDs, and installs into a single 3.5" external bay (floppy bay).Multi-Flow Technology - provides excellent passive cooling.Accommodates 2.5" drives with 5mm, 7mm & 9.5mm height.Active Power Technology (APT) - only powers up if there is drive installed in the drive bay

Icy Dock® ToughArmor Triple Bay 2.5" SATA Drive Enclosure, Matte Black (MB993SKB).Drive enclosure is perfect for use in industrial PCs, SMB SFF servers, mobile DVR systems, or even home servers.Dimensions: 1"H x 4"W x 5.2"D.Comes in matte black color with metal construction.Number of total expansion bays: 3, number of 2.5" bays: 3, drive bay: 1 x 3.5" external drive bay.Drive interface: SATA III, host interface: Serial ATA/600.Compatible drive bay width: 3.5".Maximum transfer rate: Up to 6 Gbps, Hot swappable.Drive cooling: Airflow vents with metal heat dissipation, drive security: 2 segment key lock.Features HDD access indicator.Multi-Flow Technology (MFT).Anti-vibration Technology (AVT).Active Power Technology (APT).Power input: 1 x floppy 4 pin power.Form factor: Internal.Includes enclosure, user manual, screws, keys.Weight: 370 g.Comes with 3 year limited warranty

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the Icy Dock EZConvert Lite, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable –a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Converts 2.5" SATA/SAS hard drives or SSDs of all heights into the exact form factor of a 3.5" SATA hard drive, so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used.Dimensions: 1"H x 4"W x 5.77"D.Made of ABS plastic and aluminum in black.Featuring EZ-Fit design for anti-shock and optimal drive fit.Open air design with all-around airflow vents for maximum air flow.Completely toolless drive installation for quick and easy setup.Supports 2.5" SAS HDD/SSD with single-channel SAS functions (requires SAS host).Supports SATA 6Gbps or SAS single channel.Universal mounting holes for most common PC cases.Optional screw hole for extra drive security.Perfect for anyone looking to add a 2.5" SATA HDD/SSD to their system.3-year manufacturer limited warranty

Add a 2.5" SSD or HDD to your HP Desktop Mini G4 with easy to install and remove HP G4 Mini 2.5-inch SATA drive bay kit..This drive bay kit allow you to install 2.5" SSD or HDD to your HP Desktop Mini G4.Bay provide SATA interface.Comes in silver.Compatible with: HP ProDesk 400/405 G6 Desktop Mini, HP ProDesk 600 G6 Desktop Mini, HP EliteDesk 800/805 G6 Desktop Mini.Dimensions: 0.87"H x 4.6"W x 3.33"D.1-year manufacturer limited warranty

StarTech Hard Drive Mounting Bracket Adapter, (BRACKET).Bay provided: 1 x 3 1/2" internal.Bay required: 1 x 5 1/2".Allow 3 1/2" hard drives to be mounted in standard 5 1/4" drive bays.Four mounting screws included.Install additional 3 1/2" hard drives into unused 5 1/4" bays for increased storage.Material: Metal.Package contents: Metal mounting brackets, mounting screws (#6-32), mounting screws (M3).2 years warranty.2 years warranty.StarTech.com Hard Drive Mounting Bracket Adapter - Hard Drive Accessories

This adapter enables you to use your 2 1/2-inch or 3 1/2-inch IDE-based (PATA) hard drives in most StarTech.com SATA-based HDD docking stations and drive duplicators..Interfaces ports IDE, SATA.No. of expansion bays 1.Dimensions 1"(H) x 3.1"(W) x 4"(L).Controller type ULtra ATA, SATA.Enclosure type Steel.Black.Drive installation Fixed.Number of drives 1.Chipset ID Jmicron - JM20330.Drive connectors 1 - IDE (40 Pin; EIDE PATA) female, 1 - IDE (44 Pin; EIDE PATA; 2 1 2" HDD) female, 1 - LP4 (4 pin; molex large drive power) female.Host connectors 1 - SATA (7 pin; data) plug, 1 - SATA power (15 pin) plug.Temperature 41 - 176 deg F operating, -40 - 158 deg F storage; Humidity 8 - 90 percent RH.OS compatibility OS independent; no software or drivers required.Includes 40-pin to 44-pin IDE cable with power, SP4 to LP4 power cable, package of mounting screws, instruction manual.Certifications and standards CE, FC, RoHs.Warranty 2 years limited.Startech.Com® SAT2IDEADP SATA to 2.5"/3.5" IDE Hard Drive Adapter offers mounting holes for both 2.5" and 3.5" form factor IDE hard drives.

Icy Dock TurboSwap rugged full metal single-bay 3.5" SAS/SATA trayless hard drive enclosure designed to fit any 5.25" optical drive bay of the PC cases. This enclosure features a tray-less and tool-less drive installation design for quickly swap out drives without opening the computer case or using tools. The TurboSwap has an individual drive power button and is equipped with a heavy-duty metal door latch for the best drive protection..Single-bay 3.5" SAS/SATA trayless hard drive enclosure designed to fit any 5.25" optical drive bay of the PC cases.Supports one 3.5" SAS/SATA HDD (SAS host is required for the SAS HDD).Installed into any standard external 5.25" drive bay.Housing features a full-metal construction that is suitable for rugged-edge applications and industries that require a flammability rating; comes in black.Equipped with the brand's proven trayless technology: no screws, tools, or trays are necessary to insert or eject the drive.Open-air structure and air vents all around the device offer maximum heat dissipation.Works perfectly with your computer's cooling system and keeps your drive cool even under heavy workloads.Includes four optional mounting holes for an 80mm cooling fan.Features an easy-access drive power button that allows users to shut off the drive to reduce power and drive usage or prevent a hacker or virus attack.Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single-channel SAS only).Supports SATA data and power cables with locking latches.Individual drive power button and drive activity light.Meets or exceeds the CE, RoHS, and REACH standards.3-year manufacturer limited warranty

Mount two 2.5" SATA SSDs/HDDs into a single 3.5" drive bay..Mounting bracket.Material: Steel.Dimensions: 0.9"(H) x 4"(W) x 4.6"(D).Form factor: Internal.Total expansion bays: 2, 2 x 2.5" bays.Compatible drive bay width: 3.5".Interfaces/ports: Drive interface: Serial ATA.Green compliance certificate/authority: RoHS.Includes dual 2.5" SATA hard drive to 3.5" bay mounting bracket, 1 x SATA power y cable, 2 x SATA data cables.Warranty: Lifetime limited.Total expansion bays: 2, 2 x 2.5" bays.Compatible drive bay width: 3.5".Interfaces/ports: Drive interface: Serial ATA.Green compliance certificate/authority: RoHS.Startech.com® 2.5" SATA Hard drive docking station transfers data from one hard drive to another and upgrades from a USB 2.0 drive dock to faster USB 3.0.

ICYDOCK's latest product for NVMe U.2 SSD brings the next level of ultra high speed storage in a compact package with the ToughArmor MB699VP-B. The ToughArmor MB699VP-B is a ruggedized full metal SSD cage with hot-swappable drive caddies, supporting up to 4x NVMe U.2 SSD in a single 5.25" device bay. Countless Options in a Single Bay: To fully use the speeds of NVMe SSDs, each drive bay uses its own miniSAS HD (SFF-8643) connector, maximizing NVMe U.2 SSD 's potential transfer bandwidth rate of 32Gb/s. The MB699VP-B features hot-swappable EZ slide trays found throughout the ToughArmor series, allowing for easy swaps of U.2 drives and utilizing the hot-swapping function that U.2 SSD natively supports. For extra protection, the EZ-slide trays are fully constructed with metal provided maximum protection to your valuable SSD inside and outside of the unit. Not just the EZ-slide trays are made out of durable metals, the entire unit is also full metal construction, ensuring that the drives are safe and secure while inside the unit. To bring more utility to your hard drives and SSDs, a LED is installed into the front of the mobile rack to provide drive status information at all time when the drive is powered on, off and accessed. Active Power Technology (APT) allows each LED and the cooling fan to be active only when a hard drive is inserted into the enclosure. When the unit does power up, two 40mm cooling fan placed strategically behind the rear panel provide airflow throughout the entire cage cooling all 4 bays effectively and efficiently. With two ball-bearing fans attached and three fan speed settings: high, low and off, depending on the drive usage, user can manually select the proper cooling option accordingly. Never forget which drives belong in what bays. With our individual drive ID labels you'll always know which drive tray belongs in your RAID array or which drive contains certain files. Freely unplug and rearrange them to better suit your configuration or simply remove them for a more simplified look. The ToughArmor MB699VP-B supports 15pin SATA power cables with locking latches so you'll never need to worry about cables unintentionally disconnecting from your enclosure. Once these cables are connected, they'll lock into place and stay that way.Rugged Heavy duty full metal construction with commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies.Perfect for rugged applications and complies to flammability requirements.Fits 4 x 2.5" U.2 NVMe SSD.With 12 USB ports, connect/disconnect devices while not having to shut down the system

Icy Dock® EZConvert 2.5" To 3.5" SATA SSD/Hard Drive Converter; Black.Hard drive accessory type: SATA SSD / Hard Drive Converter.Black.Dimensions: 1"(H) x 4"(W) x 5.7"(D).Interface: SATA/300.Drive fit: 3 1/2" SATA hard drive bay.Material: Plastic.Transfer rate: Up to 6 Gbps, form factor: Internal.Hot swap.Perfect for system integrators and IT professionals.Airflow vents for heat dissipation with shockproof design.Black SSD and SATA hard drive converter is designed to fit into most common PC cases, 3.5" HDD duplicator, 3.5" SATA HDD enclosure, mobile rack, and backplane modules without having to purchase any attachments for the 2.5" drives.

Introducing the ToughArmor MB720MK-B V3, a rugged and removable quad M.2 PCIe 4.0 NVMe SSD enclosure designed for a 5.25" optical drive bay. This powerful enclosure supports blazing-fast data transfer rates of up to 64Gbp/s through the OCulink (SFF-8612) interface and is compatible with Tri-mode host cards. Installing or removing M.2 NVMe SSDs has never been simpler, thanks to the removable drive trays with tool-less adjustable M.2 drive lockers. You can easily swap drives without having to open your computer case or mess with mounting screws. To ensure top-notch cooling performance, the MB720MK-B V3 comes equipped with dual cooling fans in the back, effectively dissipating the heat generated by high-speed PCIe 4.0 SSDs. Moreover, each drive tray features an extra-large heatsink lid and thermal pad, keeping your SSDs at optimal temperatures. As part of ICY DOCK's toughest line, the MB720MK-B V3 boasts a full metal construction and metal barrel key locks, providing maximum protection for your valuable drives..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Fits 4 x M.2 NVMe SSDs of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more).Connects with 4x OCulink (SFF-8612) (NVMe host required).Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay.Patent-pending screw-less M.2 adjustable locker securely holds all length drives.Removable and tool-less drive installation design for easy drive maintenance.Integrated large, high-efficiency heatsink and ample ventilation for excellent cooling performance.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with locking latch design for a secure connection.EMI Grounding protects SSDs from electrical damage.5-year manufacturer limited warranty

1834b3cdd46a9feb6df9baafb0998989.Rugged Heavy duty full metal construction with commercially designed for medical &military systems, media servers, workstation, HPCs and IPCs, approved & used by Tier 1 companies.Perfect for rugged applications and complies to flammability requirements.Fits 8 x 5mm to 7mm 2.5" SATA hard drives or SSD's in a single external 5.25" bay for high performance RAID applications.Dual 40mm user-controllable fans, with settings for high, low, and off.Connected by 2x Mini-SAS HD data cables for all 8 bays, for plug-and-play compatibility with most motherboards and RAID cards

Icy Dock® ToughArmor 2 x 2.5" SATA Mobile Rack For 3.5" Device Bay; Matt Black.Hard drive accessory type: SATA mobile rack.Black.Dimensions: 25.4 mm(H) x 101.2 mm(W) x 133 mm(L).Interface: 2 x 7pin SATA.Drive fit: 2 x 2 1/2" SATA I/II/III SSD or HDD (9.5mm thickness).Material: Metal, drive bay: 3 1/2" floppy drive bay.Transfer rate: Up to 6 Gbps, form factor: Internal.Power: Inputs: Single 15pin SATA power port.LED indicator: Power: Solid green LED (power-on), HDD access indicator: Flashing amber LED.Drive cooling: Airflow vents with metal heat dissipation.Black SATA mobile rack is able to become more and more advanced and is constantly improving.

Icy Dock® MB991SK ToughArmor 2.5" SATA HDD Mobile Rack For 3.5" Device Bay; Matt Black.Drive capacity: 2TB support.Interface/ports: 7pin SATA.No. of expansion bays: 1.Structure: Full metal.Matt black.Drive fit: Single 2.5" SATA I/II/III HDD/SSD (7 - 15 mm height drive).Drive bay: 1 x 2.5".Power: Inputs: Single 15pin SATA power port.LED indication: Device power and drive activity, LED display color: device power: Green, drive activity: Amber.Drive cooling: Metal heat dispersion.Matt black ToughArmor series 2.5" SATA HDD mobile rack for 3.5" device bay with heavy duty full metal construction is perfect for enterprise applications.

Host Interface: Serial ATA/600.Drive Interface: Serial ATA/600.Number of Total Expansion Bays: 8

Introducing the Icy Dock ToughArmor MB873MP-B V2, a rugged and removable 8 x M.2 PCIe 4.0 NVMe SSD enclosure specially designed to fit into a 5.25" optical drive bay. This powerful enclosure offers exceptional performance, supporting lightning-fast data transfer rates of up to 64 Gbps via the OCuLink (SFF-8612) interface, and is compatible with Tri-mode host cards. It is made out of heavy-duty full-metal construction and uses removable M.2 SSD trays that support tool-less drive installation/removal for effortless drive maintenance. In addition, the MB873MP-B V2 is equipped with dual 40 x 20mm cooling fans in the rear to remove the heat generated by the high-speed PCIe 4.0 SSD for the best cooling performance..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into 1 x standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Uses 8 x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1.Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay.Provides support for Tri-Mode controller cards from leading brands like Broadcom, Areca, and others.Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors.Features a removable drive tray with tool-less drive installation for easy drive maintenance.Equipped with high-performance dual 40 x 20mm cooling fans.Huge heatsink trays with thermal pads included dispersing heat from the drive.Anti-Vibration technology - creates a safe environment for SSDs.Active Power technology - saves power by shutting off the enclosure when no drive is installed.EMI Grounding protects SSDs from electrical damage.Drive ID plugs are included, so you can keep track of your drives.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with a locking latch design for a secure connection.2 x SATA 15pin power cables are included.Well-suited for high-performance PCs, compact servers, workstation PCs, and data centers where efficient storage utilization is crucial.5-year manufacturer limited warranty

The ToughArmor MB834MK-B V2 is a ruggedized two-bay removable M.2 NVMe SSD enclosure that fits a single external 3.5" drive bay of the computer system and supports PCIe 4.0 64Gb/s data transfer rates via SlimSAS 4i (SFF-8654) interface and accepts all standard M.2 drives lengths from 30mm to 110mm (2230, 2242, 2260, 2280, 22110). It simplifies the process of installing or removing M.2 NVMe SSD by using the removable drive trays with tool-less adjustable M.2 drive locker, making it easy to change drives at any time without open the computer case or dealing with drive mounting screws. In addition, while working together with numbers of ventilation holes around the enclosure, each drive tray is equipped with a high-efficiency aluminum heat sink to ensure your SSDs are at optimal temperatures. As part of Icy Dock's toughest line, the MB834MK-B V2 is made out of full metal construction with metal barrel key locks for maximum protection..Rugged and removable SSD enclosure specially designed to fit into 3.5" drive bay of the computer system.Fits 2 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 3.5" device bay or floppy bay.Rugged, full-metal enclosure meets flammability requirements.Uses 2 x SlimSAS 4i (SFF-8654) to connect, requires NVMe host.Supports the full NVMe bandwidth specification of 64Gbps.Adjustable drive locker holds all-length drives securely.Toolless drive installation design for easy drive maintenance and system upgrading.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI Grounding – protects SSDs from electrical damage.Anti-Vibration technology (AVT) reduces noise and protects against environmental damage.Active Power technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

The ToughArmor MB833MK-B V2 is a ruggedized removable M.2 NVMe SSD enclosure that fits a single external 3.5" drive bay of the computer system and supporting PCIe 4.0 64Gb/s data transfer rates via SlimSAS 4i (SFF-8654) interface and accepts all standard M.2 drives lengths from 30mm to 110mm (2230, 2242, 2260, 2280, 22110). It simplifies the process of installing or removing M.2 NVMe SSD by using the removable drive trays with tool-less adjustable M.2 drive locker, making it easy to change drives at any time without open the computer case or dealing with drive mounting screws. In addition, while working together with numbers of ventilation holes around the enclosure, each drive tray is equipped with a high efficiency aluminum heat sink to ensure your SSDs are at optimal temperatures. As part of ICY DOCK's toughest line, the MB833MK-B V2 is made out of full metal construction with metal barrel key locks for maximum protection..Rugged and removable SSD enclosure specially designed to fit into 3.5" drive bay of the computer system.Fits 1 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 3.5" device bay or floppy bay.Rugged, full-metal enclosure meets flammability requirements.Uses a SlimSAS 4i (SFF-8654) to connect, requires NVMe host.Supports the full NVMe bandwidth specification of 64Gbps.Adjustable drive locker holds all-length drives securely.Toolless drive installation design for easy drive maintenance and system upgrading.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI Grounding – protects SSDs from electrical damage.Anti-Vibration technology (AVT) reduces noise and protects against environmental damage.Active Power technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor rugged removable drive bay for 2.5" SATA hard drives and SSDs. Utilizing the standard PCIe 2.0 interface and taking only a single PCIe expansion slot, it gives you an additional hot-swappable drive bay for hard disk drives (HDDs) and solid state drives (SSDs) even when your computer does not have an open SATA port or empty drive bay. Because the single PCIe port handles both power and data, there's no additional clutter from SATA data and power cables. Fully supports hot-swapping drives with its removable drive tray..Rugged removable drive bay for 2.5" SATA hard drives and SSDs.Dimensions: 4.8"H x 6.06"W x 0.87"D.Made of ABS plastic and aluminum in black.Compatible with Mac Pro 2008-2012 models with no driver required.Fits 1 x SATA hard drive or SSD.Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots.Installs into a single-width PCIe expansion slot.PCIe interface provides both power and data transfer, which ultimately reduces cable clutter.Narrow design allows for multiple bays to be installed side by side in a modular design.Includes full-height PCIe faceplate to protect against the buildup of dust.Strong hot-swap connector rated for a minimum of 10000 insertion/removal cycles.Eagle-hook lock system keeps the drive secure in the enclosure.Anti-Vibration Technology (AVT) reduces noise and protects against environmental damage.Active Power Technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay.REMOVABLE M.2 DRIVE BAY: Use an available PCIe 4.0 x4 expansion slot to install, remove, or swap PCIe M.2 SSDs (NVMe or AHCI); Supports 2230, 2242, 2260, and 2280 M-Key M.2 NVMe SSDs; Capable of reaching high-performance read/write speeds up to 64Gbps.TOOLLESS INSTALLATION: Install an M.2 drive into the drive tray or insert the tray into the drive bay without the need for tools; Power/Activity LED indicator; Drive tray features a latching mechanism and is lockable for secure installation (2 keys incl.).OPTIMAL PERFORMANCE: Vented stainless steel frame, bracket, and tray with thermal pads and aluminum cover aid heat dissipation; Anti-vibration springs on the drive tray reduce shock or vibrations; Optional screw for stability; Incl. Low-profile bracket.COMPATIBILITY: No drivers or software required and works on any operating system including Windows, Windows Server, Linux; Supports PCI Express 4.0 and 3.0 motherboards with an available x4, x8, or x16 slot; Not compatible with M.2 SATA drives.HOT SWAP: Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately, coming soon) offer flexibility/convenience when working with multiple drives; PCIe hot swap support is dependent on the motherboard, check with the manufacturer to confirm support.Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately) provide flexibility and convenience when managing multiple M.2 drives. NVMe PCIe hot swap support is dependent on the motherboard. Verify hot swap support with the manufacturer of the motherboard, and for instructions regarding how to enable this feature..The vented stainless-steel frame and tray with thermal pads aids heat dissipation, ensuring optimal and reliable performance while reducing potential thermal throttling. Anti-vibration springs on the drive tray reduce impact during installation and enhance the overall stability and longevity of the drive. A low-profile bracket is included for small form-factor systems..Install an M.2 drive into the drive tray and insert the tray into the drive bay, without the need for tools. The drive tray features a power/activity LED indicator to monitor drive status. A latching mechanism with optional lock (2 keys included) deters the theft of mission-critical data storage devices..Package Contents:M.2 to PCIe Adapter Card,1 x Low-Profile Bracket,1 x M.2 Drive Tray,1 x Set of Keys,1 x Quick-Start Guide.StarTech.com M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay - Utilize a PCIe x4 expansion slot as a removable drive bay for M.2 SSDs; Supports up to 2280 M-Key M.2 NVMe SSDs; Tool-less installation; Lockable Drive Tray (2 keys incl.); Tray with thermal pads/anti-vibration springs; No drivers/software required

Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter is supported with PC, Mac as well as Linux platform and has 1 expansion bay. Adapter converter helps to reduce data transfer bottleneck with file transfer speed up to 6 Gb/s..Interfaces/ports: Drive: 1 - M.2 (NGFF) receptacle, host: 1 - SATA Data & Power Combo (7+15 pin) receptacle.No of expansion bays: 1.Maximum data transfer rate: 6 Gb/s, Type and rate: SATA III.Maximize system speed by adding M.2 SSD performance.Help protect the health of your drive with an open-frame design that maximizes heat dissipation.Reduce overall power consumption, with a high efficiency M.2 SSD.Drive type: M.2 (NGFF).OS compatibility: Windows XP (32/64 bit)/ Server 2003 (32/64 bit)/ Server 2008 R2/ Server 2012/ Vista (32/64 bit)/ 7 (32/64 bit)/ 8/8.1 (32/64 bit) Mac OS X, Linux.Operating temperature: -40 - 185 deg F.Included: 1 x M.2 NGFF SSD to 2.5in SATA SSD Converter, 1 x mounting screw kit, 1 x installation manual.Dimensions: 0.3"(H) x 2.8"(W) x 3.9"(D), 1.3 oz..Warranty: 2 years limited.Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter has an open-frame design to maximize heat dissipation and reduces the power consumption over regular platter drives.

Kanguru 2.5" SATA to 3.5" SATA adapter cartridges enable you to duplicate 2.5" SATA hard drives (up to 9.5mm thickness) using your KCLONE-5HD-TWR and KCLONE-11HD-TWR model Kanguru Clone hard drive duplicators..Duplicate 2.5" SATA laptop drives (up to 9.5mm thickness).Comes in black.Device type: storage bay adapter

Add the fast performance of an M.2 NVMe SSD to your desktop computer or server by converting the drive through a U.2 (SFF-8639) compatible interface on your motherboard. This PCI Express M.2 to U.2 adapter makes it easy to install an M.2 PCIe NVMe SSD into your desktop PC or server, and connect to the drive through an available U.2 (SFF-8639) compatible interface on your motherboard.Upgrade your system cost-effectively.Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe SSD to your PC or server.Adapter supports one M.2 PCIe NVMe SSD (M-Key).U.2 (SFF-8639) host interface

Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor to install in U.3 drive bays/backplanes. Compatible with U.3 (SFF-TA-1001) host interfaces; M.2 to U.3 adapter is TAA compliant. Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds. No chipset design ensures no loss in performance when adapting to 2.5". M.2 to U.3 Host Adapter works with all operating systems including Windows, macOS, and Linux. M2 to U.3 Adapter requires no additional drivers or software. Includes drive and adapter mounting screws for an efficient installation..Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor with this adapter.Designed for M.2 NVMe drives.Internal Interface: M.2 NVMe; external Interface: U.3 2.5" form factor.Drive type: PCIe M.2 NVMe/AHCI SSD.Comes in red.Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds.Works with all operating systems including Windows, macOS, and Linux.Open frame design enables support for M.2 drives with larger heatsinks, and allows for better airflow.Supports PCIe 4.0 and lower drives.Meets or exceeds the RoHS, TAA, and WEEE standards.2-year manufacturer limited warranty