Hard Drive Adapter Cables
6 results
This adapter enables you to use your 2 1/2-inch or 3 1/2-inch IDE-based (PATA) hard drives in most StarTech.com SATA-based HDD docking stations and drive duplicators..Interfaces ports IDE, SATA.No. of expansion bays 1.Dimensions 1"(H) x 3.1"(W) x 4"(L).Controller type ULtra ATA, SATA.Enclosure type Steel.Black.Drive installation Fixed.Number of drives 1.Chipset ID Jmicron - JM20330.Drive connectors 1 - IDE (40 Pin; EIDE PATA) female, 1 - IDE (44 Pin; EIDE PATA; 2 1 2" HDD) female, 1 - LP4 (4 pin; molex large drive power) female.Host connectors 1 - SATA (7 pin; data) plug, 1 - SATA power (15 pin) plug.Temperature 41 - 176 deg F operating, -40 - 158 deg F storage; Humidity 8 - 90 percent RH.OS compatibility OS independent; no software or drivers required.Includes 40-pin to 44-pin IDE cable with power, SP4 to LP4 power cable, package of mounting screws, instruction manual.Certifications and standards CE, FC, RoHs.Warranty 2 years limited.Startech.Com® SAT2IDEADP SATA to 2.5"/3.5" IDE Hard Drive Adapter offers mounting holes for both 2.5" and 3.5" form factor IDE hard drives.
As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the EZConvert Lite MB882SP-1S-3B, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights (7mm to 15mm) into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable -a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Drive Interface: Serial ATA/600, SAS.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Useful for the multi-tenant unit and multi-business unit with Layer 4 traffic classifiers and bandwidth limit
Kanguru 2.5" SATA to 3.5" SATA adapter cartridges enable you to duplicate 2.5" SATA hard drives (up to 9.5mm thickness) using your KCLONE-5HD-TWR and KCLONE-11HD-TWR model Kanguru Clone hard drive duplicators..Duplicate 2.5" SATA laptop drives (up to 9.5mm thickness).Comes in black.Device type: storage bay adapter
The QNAP QDA-SA3 adapter allows SATA drives to be used in SAS drive bays, enabling cost-effective storage expansion in enterprise NAS systems. It supports 2.5-inch SATA HDDs and SSDs with up to 6 Gb/s transfer speeds and leverages SAS dual-port advantages for redundancy and fault tolerance. Designed for QNAP all-flash arrays, it ensures high availability and easy installation..Supports up to 6 Gb/s transfer speeds for efficiency..Provides SAS dual-port redundancy for reliability..Ideal for QNAP enterprise NAS environments.
Add the fast performance of an M.2 NVMe SSD to your desktop computer or server by converting the drive through a U.2 (SFF-8639) compatible interface on your motherboard. This PCI Express M.2 to U.2 adapter makes it easy to install an M.2 PCIe NVMe SSD into your desktop PC or server, and connect to the drive through an available U.2 (SFF-8639) compatible interface on your motherboard.Upgrade your system cost-effectively.Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe SSD to your PC or server.Adapter supports one M.2 PCIe NVMe SSD (M-Key).U.2 (SFF-8639) host interface
Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor to install in U.3 drive bays/backplanes. Compatible with U.3 (SFF-TA-1001) host interfaces; M.2 to U.3 adapter is TAA compliant. Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds. No chipset design ensures no loss in performance when adapting to 2.5". M.2 to U.3 Host Adapter works with all operating systems including Windows, macOS, and Linux. M2 to U.3 Adapter requires no additional drivers or software. Includes drive and adapter mounting screws for an efficient installation..Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor with this adapter.Designed for M.2 NVMe drives.Internal Interface: M.2 NVMe; external Interface: U.3 2.5" form factor.Drive type: PCIe M.2 NVMe/AHCI SSD.Comes in red.Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds.Works with all operating systems including Windows, macOS, and Linux.Open frame design enables support for M.2 drives with larger heatsinks, and allows for better airflow.Supports PCIe 4.0 and lower drives.Meets or exceeds the RoHS, TAA, and WEEE standards.2-year manufacturer limited warranty
You May Also Like
Here's a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps). With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2. USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required..QUICKLY ACCESS A SATA SSD OR HDD: This USB 3.1 to SATA cable delivers instant access to your 2.5" SATA drives from your laptop or computer; The adapter is compatible with SATA I, II and III (up to 6Gbps) NOTE: Supports 2.5" SATA drives only. For 3.5" drives please see our USB312SAT3.FAST TRANSFER SPEEDS & UASP SUPPORT: The SATA hard drive adapter cable lets users experience enhanced performance and super-fast data transfer speeds with support for USB 3.1 (10Gbps) and UASP.CONNECT FROM ANYWHERE: The external HDD / SSD storage converter delivers perfect portability, tucking away nicely in a laptop bag; The cable-style adapter is USB-powered so no external power cords are required.1 x SATA/Power.PLUG-AND-PLAY: Access any 2.5" hard drive or solid-state drive from any USB enabled computer by simply plugging in the SATA adapter cable; you can easily swap between drives with no need to install the drive inside an enclosure.Black.Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable
Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter is supported with PC, Mac as well as Linux platform and has 1 expansion bay. Adapter converter helps to reduce data transfer bottleneck with file transfer speed up to 6 Gb/s..Interfaces/ports: Drive: 1 - M.2 (NGFF) receptacle, host: 1 - SATA Data & Power Combo (7+15 pin) receptacle.No of expansion bays: 1.Maximum data transfer rate: 6 Gb/s, Type and rate: SATA III.Maximize system speed by adding M.2 SSD performance.Help protect the health of your drive with an open-frame design that maximizes heat dissipation.Reduce overall power consumption, with a high efficiency M.2 SSD.Drive type: M.2 (NGFF).OS compatibility: Windows XP (32/64 bit)/ Server 2003 (32/64 bit)/ Server 2008 R2/ Server 2012/ Vista (32/64 bit)/ 7 (32/64 bit)/ 8/8.1 (32/64 bit) Mac OS X, Linux.Operating temperature: -40 - 185 deg F.Included: 1 x M.2 NGFF SSD to 2.5in SATA SSD Converter, 1 x mounting screw kit, 1 x installation manual.Dimensions: 0.3"(H) x 2.8"(W) x 3.9"(D), 1.3 oz..Warranty: 2 years limited.Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter has an open-frame design to maximize heat dissipation and reduces the power consumption over regular platter drives.
StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.
Startech® 8.3" USB 3.0 to 2.5" SATA III Hard Drive Adapter Cable W/UASP/SATA to USB3.0 Converter.Hard drive accessory type: SATA III hard drive adapter cable.8.3".Black.Dimensions: 0.4"(H) x 1.9"(W) x 8.3"(L).Interfaces: Drive connector: 1 x 7+15-pin SATA data & power combo receptacle, host connectors: 1 x 9-pin SuperSpeed USB 3.0 A male.Conductor: Copper.Supports USB 3.0 data transfer speeds of 5Gbps and is backward compatible with USB 2.0.Copper.SATA to USB Adapter Cable | SATA III 6Gbps | 2.5" SSD or HDD | USB 3.0 | Portable
Startech.com® 40-Pin IDE PATA to SATA adapter converter provides ODD support which allows you to add Blu-ray, DVD or CD-ROM drives to an older IDE motherboard. Converter provides support for 48-bit logical block addressing..Hard drive accessory type: IDE to SATA adapter converter.Red.Dimensions: 0.9"(H) x 0.8"(W).Chipset ID: Marvell 88SA8852.Connector type: 1 x IDE (40 Pin, EIDE/PATA), 1 x SATA data and power combo (7+15 pin), 1 x SP4 (4 pin small drive power).Maximum data transfer rate: 133 Mbps.Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection.Hassle free installation, with no software CD required.Support for 48-bit logical block addressing.Compliant with SATA revision 1.0 specification, compatible with Ultra ATA 133 specification.Supports 2 1/2", 3 1/2", and 5 1/4" SATA drives.Internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface.Ideal for use with older motherboards that do not support SATA.Compatibility: Blu-ray drive, DVD drive, CD-ROM drive.Environmental info: 5 - 50 Deg C operating temperature, 15 - 90% relative humidity.System requirements: An IDE controller and ATA cable.Certifications and standards: FCC, RoHS.Includes 40-pin IDE PATA to SATA adapter converter for HDD/SSD/ODD, 1 x LP4 Molex to SP4 power cable, 1 x instruction manual.Warranty: 2 years limited.Startech.com® 40-Pin IDE PATA to SATA adapter converter helps to connect a SATA device to an IDE/ATA motherboard and is ideal for use with older motherboards that do not support SATA.
StarTech Hard drive converter measures 1" x 3.9" x 5.7" and is designed for 2 1/2" SATA/SAS SSD/HDD to 3 1/2" SATA conversion. Internal converter features Lightweight plastic construction with air vents..Black.Interfaces: SAS, serial ATA.Interface connectors: 1 - SFF - 8482 (29 pin, data and power, internal SAS) receptacle, 1 - SATA data and power combo (7+15 pin) plug.Form factor: Internal.Dimensions: 1"(H) x 3.9"(W) x 5.7"(L).Applications: Install a 2 1/2" hard drive into a 3 1/2" hard drive enclosure or backplane.Lightweight plastic construction with air vents.Supports 2 1/2" form factor hard drives (HDD) and solid state drives (SSD) up to 15 mm in height.Includes: 2 1/2" - 3 1/2" HDD converter.Certifications and standards: RoHS, FCC, CE.Weight: 4.8 oz..Warranty: 2 years limited.StarTech 2.5-to-3.5-Inch Drive Converter - Avoid Buying New Hard Drives
This StarTech USB 3.0 Hard Drive Docking Station delivers full, instant access to any 2.5-inch or 3.5-inch SATA (SATA, SATA II, SATA III) hard drive (HDD) or solid state drive (SSD), without having to mount the drive in a computer or install it in an external enclosure. Large capacity drives (tested with up to 4TB 3.5"" and 1TB 2.5"" drives) greatly enhance your computer's storage/backup capabilities..SuperSpeed USB 3.0 compliant host interface, with transfer rates up to 5Gbps. High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps.Supports 2.5" and 3.5" form factor SATA hard drives (HDD) and solid state drives (SSD).Dimensions 2.6"(H) x 3.7"(W) x 5.7"(L).1 Expansion bay.Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives.Compact, desktop-style form factor in a solid black color.Drive connectors: 1 - SATA data and power combo (7+15 pin) receptacle.Host connector: 1 - USB 3.0 B (9 pin; SuperSpeed) female.Compatible with Microsoft Windows, Apple OSX, Linux, and Google Chrome OS.Certifications and standards CE, FCC, RoHs.2-Year Limited Warranty.A top slot-loading design and unique drive ejection mechanism provides quick and easy access to the data without having to install drives into an enclosure or tray.LED indicators 1 - power and activity (solid - power, blinking - activity); Power 12 VDC, 2.5A.Temperature 41 - 176 deg F operating, -40 - 158 deg F Storage; Humidity 8 - 80 percent RH.OS compatibility Windows 2000 XP (32 64-bit) Server 2003 (32 64-bit) Server 2008 R2 Vista (32 64-bit) 7 (32 64-bit) 8 (32 64-bit), Linux 2.6.31 and up.Insertion rating 15000 cycles.Includes USB 3.0 HDD dock, USB 3.0 cable, universal power adapter, 3 x power adapter plug (NA EU UK), instruction manual.Certifications and standards CE, FCC, RoHs.Warranty 2 years limited.StarTech USB 3.0 SATA II Hard Drive Docking Station is capable of transfer speed up 5 Gbps, making it the fastest way to access data from an external drive.
Connect a 2.5" or 3.5" SATA SSD/HDD to your USB-C enabled computer, with this USB 3.1 adapter cable. This USB-Câ„¢ to SATA adapter cable gives you fast and easy access to the data on your 2.5 in./3.5 in. solid-state drives and hard drives. The adapter cable lets you connect your USB-C enabled laptop or desktop computer directly to a SATA drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10Gbps)..Connect a 2.5"/3.5" SATA drive to your USB-C enabled laptop or desktop computer, for quick access to your external data.Fast data transfer rates through USB 3.1 Gen 2 (10Gbps).Integrated 1 m cable, for convenient use.Certifications and standards: WEEE, RoHS
StarTech Drive Docking Station.Device Type: HDD docking station - external.Bays: 1.Bus Type: eSATA, USB 3.1 (Gen 2).Color: Black.Expansion Bays: 1 x hot-swap - 2.5" / 3.5" shared.Hard Drive Form Factor Compatibility: 2.5", 3.5".Interface: SATA 6Gb/s
StarTech 2.5in SATA Hard Drive to 3.5in Drive Bay Mounting Kit.Hard drive accessory type: SATA.Drive connectors: 1 x SATA data and power combo (7 + 15 pin) receptacle.Host connectors: 1 x LP4 (4 pin - Molex large drive power) male, 1 x SATA (7 pin - data) receptacle.2 1/2" SATA hard drive in a 3 1/2" drive bay.A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive.Features a sturdy aluminum bracket as well as a combined SATA cable which helps simplify installation and reduce clutter within the computer case.Device supported: Hard disk drive.Compatibility: PC.Green compliance certificate/authority: RoHS.Material: Aluminum.Package contents: 3 1/2" mounting bracket, data/power adapter cable, screw kit.2 years warranty.Bay provided: 1 x 2 1/2" internal, bay required: 1 x 3 1/2" internal.StarTech.com Drive Bay Mounting Kit - Secure Your Internal Hard Drive
Startech.com® USB 3.0/eSATA Docking station hard drive measures 2.8" x 5.2" x 5.6" with serial ATA/600 drive interface and offers removable drive installation. Hard drive supports PC, Mac and Linux platform..Hard drive accessory type: Docking station.Number of total expansion bays: 2, number of 5.25" bays: No, number of 2.5"/3.5" bays: 2.Black.Drive interface: Serial ATA/600, form factor: External, power source: AC adapter, drive installation: Removable, chipset ID: JMicron - JMS562.Host interface: USB 3.0, eSATA, material: Plastic.Input voltage: 120 - 230 VAC, input current: 1.3 A, output current: 3000 mA.Dimension: 2.8"(H) x 5.2"(W) x 5.6"(D).Temperature: 5 to 35 deg C (operating), -20 to 50 deg C (storage), Humidity: 20 to 80%RH.OS compatibility: Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, Apple® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chrome™ OS.Compatible with: USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps).Drive connectors: 2 - SATA data & power combo (7+15 pin) receptacle, Host connectors: 1 - eSATA (7 pin; data) female, 1 - USB 3.0 B (9 pin; superspeed) female.UASP support: Yes, Type and rate: SATA III (6 Gbps).Max drive capacity: Currently tested with up to 4TB 7200 RPM 3.5"Hard drives per bay (8TB total) and 2TB 5900 RPM 2.5"Hard drives (2TB total), Insertion rating: 15000 Cycles.Platform supported: PC, Mac, Linux.Certifications and standards: FCC, CE.Green compliance certificate/authority: RoHS.Package contents: USB 3.0/eSATA to Dual 2.5/3.5in SATA hard drive docking station, 1 x USB 3.0 cable, 1 x eSATA cable, 1 x universal power adapter (NA/UK/EU), 1 x instruction manual.Weight: 1.08 lbs..Warranty: 2 years limited.Startech.com® USB 3.0/eSATA Docking station hard drive in black color is constructed out of plastic material for long durability.
Introducing the ICY DOCK MB882SP-1S-2B: another milestone in our 2.5" SSD product line. Through manufacturing efficiency, we have managed to redesign the original MB882SP-1S-1B without any sacrifice to our standard of high quality products. The new version is lighter weight for simplicity and cost efficiency. It is very convenient for gamers and power users who expect SSD speed on their home/ office computers. Some other new elements to the converter are viewing slots placed over the SATA connection, allowing the user to verify their HDD or SSD has made a secure connection. This also functions as an extra set of airflow vents for extra cooling with your SSD or HDD. Overall, a lightweight and simplistic design that is perfect for power users, gamers, and average computer users for use in their desktops, media centers, and home servers..Drive Interface: Serial ATA/300.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.AMD Radeon R7 M460 Up to 2 GB discrete graphic card provides excellent ability in a variety of multimedia applications and user experiences
Icy Dock® ToughArmor EX 2.5"/3.5" Internal SATA/SAS HDD/SSD Mobile Rack Drive Bay Adapter; Black (MB492SKLB).Drive fit: Two 2.5" SAS/SATA HDD/SSD.Drive bay fit: 3.5" front device bay (floppy bay).Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.Drive cooling: Metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Drive security: Two segment key lock + thumbscrew lock.Dimensions: 1"H x 4"W x 5.4"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for enterprise applications.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led only powers up if there is drive installed in the drive bay.Contains user manual, screws, keys and drive ID plug.Weight: 1.77 lbs..Comes with 3 years warranty
This compact flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM micro drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive..CompactFlash.Includes: Compact flash to IDE adapter, 3 1/2" enclosure, full profile expansion slot bracket, SP4 to LP4 molex power cable, instruction manual.Interface: 1 x 44 pin IDE/EIDE.Media supported: CompactFlash Type I, II, microdrive.Host connectors: 1 - IDE (40 Pin, EIDE/PATA) male, 1 - SP4 (4 pin, small drive power) male.Compatible slots: 1 x expansion slot, Compatible bays: 1 x front accessible - 3 1/2" x 1/3H.Use your compact flash card as a bootable and removable device.Excellent for swapping operating systems quickly without having to take your computer apart.Easily swap cards in and out with built in push button ejector.Easy to use jumpers offer simple master/slave drive setting.Can be mounted in the front or rear panel of your case, to fit into any 3 1/2" bay or available expansion slot.Temperature: - 67 to 185 deg F, Humidity: 5 to 85% RH.Certifications and standards: FCC, RoHS.Weight: 5.1 oz.Warranty: 2 years limited.StarTech Drive Bay Single CompactFlash Card Reader/Writer - Flashcard Accessibility
Icy Dock® EZConvert 2.5" To 3.5" SATA SSD/Hard Drive Converter; Black.Hard drive accessory type: SATA SSD / Hard Drive Converter.Black.Dimensions: 1"(H) x 4"(W) x 5.7"(D).Interface: SATA/300.Drive fit: 3 1/2" SATA hard drive bay.Material: Plastic.Transfer rate: Up to 6 Gbps, form factor: Internal.Hot swap.Perfect for system integrators and IT professionals.Airflow vents for heat dissipation with shockproof design.Black SSD and SATA hard drive converter is designed to fit into most common PC cases, 3.5" HDD duplicator, 3.5" SATA HDD enclosure, mobile rack, and backplane modules without having to purchase any attachments for the 2.5" drives.
The Startech.com ® 3' adapter cable enables you to connect external eSATA hard drive, solid state drive or optical disc drive to your USB-enabled computer system. This USB 3.0 to SATA HDD/SSD/ODD adapter cable supports transfer speeds up to 5 Gb/s through USB 3.0 and efficiently maximizes storage/backup capabilities of your computer. It is compatible with virtually any eSATA device and allows a hassle-free connection with easy plug-and-play installation..Comes in black color and this 3' adapter cable supports up to 5 Gb/s data transfer rate.Cable length: 3'.Connections: eSATA to USB.Interface: USB 3.0.First end connection: one 7-pin eSATA female.Second end connection: one 9-pin type A USB male.Compatible with USB 3.0/2.0/1.1.Chipset ID: ASM1153E.Dimensions: 0.4"H x 0.9"W x 35.8"L.Supports data transfer rates up to 6 Gb/s and works well without any driver or software installation.Currently tested with up to 4TB, 7200 RPM hard drives drive capacity for optimal performance.Temperature: 0 to 60 deg C (operating), -10 to 70 deg C (storage).Contains one USB cable and installation guide.Meets CE, FCC, RoHS standards and certifications.Weight: 2.8 oz..Comes with 2 years warranty.The StarTech.com 3' SATA 6 Gbps eSATA Hard Drive to USB 3.0 Adapter Cable comes with plug-n-play installation that ensures hassle-free usage without the need of driver installation.